Bachelor Thesis resource search
Hello @all,
I search for some resources for my Bachelor Thesis. The topic is 'Developing a shop solution using SAP and Adobe Flex'. So I search resources for SAP ECO, Adobe Flex and some alternatives to Adobe Flex. Maybe some assessment reports were helpful.
Can anybody help me?
Kind Regards
Christopher
Hi
There is BAdI: DPR_SEARCH which you can use.
You can implement it with custom logic
Talking about PA-PSA based search, Is available using PFAL transaction for BP creation
You need to Map your PA-PSA with Area-location of cProjects
Niranjan
Let me know if it helps!!!
Similar Messages
-
Resource Search in cProjects 4.0 not fetching results
Hi All,
Working on cProjects 4.0, I have specified the qualifications catalog and selected a few items from the catalog for a role. These are the items I have set for the resource (Business Partner). However, when I do a 'Resource Search' at the front end, the system does not throw the list of resource I expect the system to do.
Where could I be going wrong?
Thanks all...Hi Zhenbo,
Thanks for your response. This, however, does not help.
As mentioned, I have defined the qualification catalog and selected the qualifications for the role. The resouce (BP) does have the required qualifications. However, the 'Resource Search' fetches no results.
Do I have to have the resources defined in WFM to be able to fetch? I guess no...
Do suggest.
Thanks and Regards... -
CProjects 4.0 - Resource Search
Having specified the 'Qualification' and 'Minimum Availability', when I do a resource search, I get the list in line with the expected. On this page, few of the columns - Resource Name, Assignment, Suitability etc. have the expected (and right) values. However, such columns as 'Time Available', 'Capacity' and 'Availability' have values zero.
What ooght to be done to get the right values in these columns?
Thanks and Regards...Hi Reema,
Thanks for the inputs. I did specify the location and availability for an employee in the transaction you specified - RPM_EMPDATA. Havng done this, I see the columns Skills, Location, and Availability checked (ticked right).
But I see no difference at the front end. When I do a resource search, and when this resource appears in the search list, I see values in the columns 'Resource Name', 'Assignment', 'Suitability' etc. but the 'Time Available', 'Capacity' and 'Availablity' columns still read zero.
Anything else that you'd suggest me doing???
Thanks again... -
Authoriization object for resource search in cProjects
Does anybody know which authorization object is required for resource search in cProjects 5.0 ? I need to to grant an access exactly via the user role and authorization object, not via the Authorization bookmark in cProjects.
Thanks!Hello Kiryl,
this is what you can do with Cprojects 4.5:
cProjects Roles
The following single roles are delivered with cProjects:
Role Authorization
SAP_CPR_PROJECT_ADMINISTRATOR Create projects (project definitions).
SAP_CPR_TEMPLATE_ADMINISTRATOR
Create, change, read, and delete all
templates in cProjects.
SAP_CPR_USER
Use cProjects, but no authorization to
perform any activities in a particular project.
To do this users need project-specific
authorizations, which can be distributed
either directly or through their assignment to
a role.
This role must be included in every
cProjects composite role.
The following composite roles are delivered with cProjects:
Role Authorization
SAP_CPR_DECISON_MAKER cProjects decision maker. Contains the role
SAP_CPR_USER.
SAP_CPR_INTERESTED cProjects interested party. Contains the role
SAP_CPR_USER.
SAP_CPR_MEMBER cProjects team member. Contains the role
SAP_CPR_USER.
SAP_CPR_PROJECT_LEAD cProjects project manager. Contains the role
SAP_CPR_PROJECT_ADMINISTRATOR
and SAP_CPR_USER
SAP_CPR_TEMPLATE_RESPONSIBLE cProjects template responsible. Contains the
roles
SAP_CPR_TEMPLATE_ADMINISTRATOR
and SAP_CPR_USER
You can use these SAP standard roles or create your own. For more information see the
solution management content for cProjects under Solutions → mySAP PLM → Configuration
Settings → SAP cProject Suite 4.00 → General Settings → Activating Single Roles for
cProjects and Creating Roles for the Project-Specific Authorization Checks.
In cProjects, you carry out Customizing activities in the SAP Web AS. Only
system administrators, that is, users with the authorization profile SAP_ALL, are
authorized to carry out Customizing for cProjects.
Hope this helps.
Regards
Thomas -
SAP NetWeaver MDM - Project and Bachelor Thesis
Hello,
I am a German student of business information systems. I will write my project and bachelor thesis about u201Chow to synchronize and interchange the master data of an existing non-sap portal, with an existing sap erp systemu201D.
Therefore I would like to use the SAP NetWeaver Platform with SAP NetWeaver MDM. The thesis shall consist of two parts. First, the project thesis shall contain the requirements analysis and the specification. The bachelor thesis shall contain the implementation of these systems.
But there is one big problem. Is there any possibility to get SAP NetWeaver for educational propose, e.g. for free or for a free trial? At the download area of the sdn webpage, I found an SAP NetWeaver 7.0 u2013 Java Trial Version. Does this NetWeaver-Version include the Master Data Management Component? Does I need any other SAP-Systems to exchange the Master Data between these two Systems?
Thanks a lot,
Christian
Edited by: Christian Beining on Jun 26, 2008 6:28 PMHi Christian,
you can get a trial version of MDM as a SAP customer (in Germany via your SAP software distributor). If you have only access to a SAP university system I don't think you will get access to MDM and XI (at least they don't have it at my university). But of course you can ask your professor or SAP representative maybe they can help you. As far as I know all SAP university systems in Germany are hosted centrally in Munich and I don't think that they also provide such special solutions like MDM.
Doing a similar job in my thesis I can only recommend you to do this project only then if you have definitely access to all needed systems and having some people around with knowledge in additonal needed tools like XI or administration of SAP systems. Doing it all at your own without having SAP knowledge in the important points (system and database administration, software deployment, XI) is not realistic in a 5 month period when you have to build a SAP system landscape on your own in top of your project.
Hope that helps. BR, bd -
CProjects 4.0 : Correct resource search and incorrect staffing
Hello to all SAP community!
I am using resource search by qualification in cProjects. The search itself is OK, but when I am trying to staff the project role from resources found, the role is staffed by N.N.1 resource, not that one that I have chosen.
Does anybody know what is the reason of such collision?Hi Kiryl,
I have heard this behaviour recently, there should be a note for it. Would you please search the notes using the the key words. You can also post hotpackage stand of your system, I will then search it.
Kind regards,
Zhenbo -
Good sources for Bachelor thesis about DAWs?
Hi,
I have a little question. Is there any suitable literature regarding Adobe Audition or another frequently used DAW you would recommend me? I'm going to elaborate Bachelor thesis about DAW softwares next year. Aim of the thesis will be to analyze the most used DAWs and identify strengths and weaknesses. Result of thesis will be the comparing the analyzed software.
I found some books at online stores, but first I want to find out, if you would recommend me some specific publication.
Thank you, Michal.How about looking at some of the online user manuals for different DAWs.
http://helpx.adobe.com/audition/topics.html -
Resource search based on Customer and Project role type
We are using cProjects 3.1 with WFM core and SAP ECC 5.0 We have been able to search for resources (created as Business partners) based on Org Unit, Qualifications and also Availability %.
But while searching in the General tab, if we enter the
Customer/Ordering Party field or Project Role type field, the search yields no results. However if both these fields are blank, the search gives correct results.
Thanks & regards,
Khalid Khan
mobile: 91-9890530220Hi
There is BAdI: DPR_SEARCH which you can use.
You can implement it with custom logic
Talking about PA-PSA based search, Is available using PFAL transaction for BP creation
You need to Map your PA-PSA with Area-location of cProjects
Niranjan
Let me know if it helps!!! -
[OIM] Resources search takes more than 10 minutes
Hi everyone,
I have several resources (more than 6,000), and I have the following problem:
1) I go to Request -> Resources
2) select a user.
3) in the notification screen, I left the send notification checked and click on next.
After the last next, the resources screen should appear. It takes more than 10 minutes. I am uploading more resources and I see that as I add more, the time of searching the resources increases linearly with the ammount of resources.
Is there a way of putting some filter for this search so it takes less time, or I have to make a custom app for requesting resources?
Thanks!I think the application does too much validations in these kind of searches. I noticed that until 9.1.0, the Organization lookup in the Users -> Create User showed all possible results, but in 9.1.0.2 you will see that it shows nothing, you have to enter a search filter so organizations appears. Perhaps it's the solution to these problems, that all sarches show nothing at the first time and then you filter the results.
I opened the war, but the code for searching appears to be generic to all search pages, so I think it's very dangerous to change the OIM core. -
Resource Search without WFM Core
Hi all,
Is it possible to search for resources in cProjects frontend without using WFM Core? Please guide.
Thanks,
Vivek PandeySolved.
-
Resource search, only 1 resource displayed
When i enter a new role in cProjects with qualifications and i use the resource finder (via the: find resource button)
i only get 1 result... while i know that there are at least 20 people with availability and the required qualification.
What can i do to check what is going wrong?
And i found the answer... on the first tab there is a field that says: maximum number of results... and of course this was set to 1.....
Edited by: Miel Claessens on Feb 5, 2008 2:36 PMHi
There is BAdI: DPR_SEARCH which you can use.
You can implement it with custom logic
Talking about PA-PSA based search, Is available using PFAL transaction for BP creation
You need to Map your PA-PSA with Area-location of cProjects
Niranjan
Let me know if it helps!!! -
Resource search with "wrong" Org Structure
Hello,
I am using cProjects 4.5.
My org structure is coming from SAP HCM (IDOC HRMD_ABA)
Now i am creating a project with resource-role.
When i want to staff that role with resources i'll use the "resource source" button.
I can search by organisational structure, but here i'll see a part of the structure....not the whole structure i see when i use PPOME.
The dates are right. Which influence this search bij organisational unit?Solved the problem:
OSS NOTE 960556 -
How do I add my Smart Contacts (on my Mac), to my iPhone? The Smart Contacts facility makes searching for a Contact so much easier, but this facility does not seem to be available on my iPhone.
Any suggestions?How do I add my Smart Contacts (on my Mac), to my iPhone? The Smart Contacts facility makes searching for a Contact so much easier, but this facility does not seem to be available on my iPhone.
Any suggestions? -
Bachelor thesis in Rich Internet Applications
Hi,
First of all, sorry for my engIish.
I don't know if this is the right section of the forum, anyway I'm going to explain my problem:
I'm writing down a thesis about RIAs: in my intentions i want to "speak" in particoular about Java
tecnologies in RIAs development. Before starting, I need a hand in creating an index of the topics.
Here comes my draft:
INTRO
Web 2.0
Web Infrastructure (like old style sync request, AJAX, COMET)
Tools (donno the right name to give them, talking about XHTML, CSS, XML, JSON, and all that supports RIAs and the previuos section in general)
SERVER SIDE
Server (Tomcat, Glassfish)
Servlet, JSP, JSF
Database (JavaDB, JDBC)
Web Services (REST, SOAP, WDSL and so on)
CLIENT SIDE
JavaFX
Applet
Java Web Start
APPLICATION EXAMPLE
CONCLUSION
It is just what I have in my mind right now, it's confused and obfuscated, but still gives the idea of my organization. Or not?
What you think about it? Anything I'm missin'? Anything out of topic, or in the wrong section?
Thank you for any answer.Your links are broken. This is not a good demonstration of your web-based development skills. Obviously this means I have not been able to look at your examples. However, I will offer three comments.
(1) Dynamic rendering of objects is liable to translate into a slow experience for the user. Anyone who's migrated client/server Oracle Forms to web-deployed Forms will know what I mean. And Oracle have put person-years of effort into optimising the rendering of their Forms applet.
(2) Doing a GUI in Java Swing is the easy bit. The hard stuff resides in the transaction management that Forms does for us. Again the amount of effort Oracle have put into JDeveloper's ADF packages is a testament (and a warning).
(3) I suppose you will say that are going to put all that stuff into database stored procedures. But that merely relocates the complexity rather than answering it. Furthermore a lot of the benefit users derive from rich client applications (as opposed to HTML forms) is not due to the superior aesthetic experience of using Windows widgets. Rather it is the embedded business logic (complex data validation, event triggers, etc.) which means the gets instantaneous responses to their input. That's a lot of complexity to render on the fly.
I am also thinking the possibility to create migration routines to
convert our Oracle Forms modules to stored procedures using this framework. Good luck!
Cheers, APC -
With all these resources why is Aperture so slow?
Since the last update Aperture 3.0.2 is running slower that before. When I check Activity monitor at times it will have 145% of the CPU over 36 threads using a gig and a half of ram and just sit there being in an almost hung state. I say almost hung because I can still move my mouse and do things like close and open windows in Aperture even navigate between views, yet my image is hung waiting for a retouch or skin smoothing to take effect. After several minutes I end up closing Aperture and starting it back up again only to have the same thing happen again and again.
I realize I don't have the biggest baddest MacBook on the block, but geez I do have a 2.4 core duo with 4 gigs of Ram.Thanks, I will give those options a try. I have already turned off faces and when I first loaded version 3 I did let the laptop run for a couple days to do all the background processing it needed. It doesn't appear to be doing anything when I open it and just let it sit there now, so I think it is done.
As far as the resources are concerned, I can understand the times when I have it maxed out and it is slow, but why does it just sit there and never complete the task I just did when the CPU is only at 2% and I am running nothing else on the laptop? At times like that is should be as fast as lighting. This is not a hardware issue, but a bug in the software somewhere.
For the example of the 2% CPU usage and the application just sitting there doing nothing here is a screen shot of the image and the adjustments it has. It was the last one, the skin smoothing I had just completed on her face that was sitting there doing nothing. Since I have rebooted it seems to have applied, but I haven't tried do to anything else yet to this image.
www.vensland.com/wp-content/gallery/blog-photographs/screen-shot-2010-04-18-at-1 0-14-16-pm.png
Maybe you are looking for
-
junk mail filter in yosemite doesn't work. from the flags, i can't find the 'mark as junk' selection. Formerly clicking on the email address in question would allow one to 'remove from previous recipients' which would help to filter out spam. I've ad
-
I have to insert and update nearly 1000 records in Oracle, when user clicks "Save" button, but this is taking approx. 2mins, and the user has to wait for these 2mins, with out any operation. Is there any chance that i can reduce this time. I am using
-
Hi I am getting a short dump "'DYNPRO_MSG_IN_HELP' "when i click '1 box pack' button in VL02N transaction during our upgrade system from 4.6C to ECC 6.0. When i go through the old SAP note - 401823, it says to add entries in VFBS transaction for all
-
Missing select-options for kna1-kunnr
Hi, Has anybody ever come across this before ? I've modified a program to add a new select options for kna1-kunnr and added a bit of code that processes the value entered. In "development" it all tested OK and the program was transported up to "test"
-
Hi, I want to add a user to a role . This user needs access to BI-Q. Is it ok to add the role in QA or should I add in BI-Dev and transport it to QA? Please advise.. Will there be any problem if I add the user in BI-Q? what is the usual practice? Edi