Back black panel not tight on MBP 2014 retina !

hi guys
i bought a new macbook pro retina 2014 a month ago.
And today when i closed it i found that black panel is not tight when i press on it it has a lift closer to the middle. When i open a screen its ok , fits tight !
anyone have that ? how can i tighten it?
i attached photo
on my previous mac i didn't have that problem !

If this is a USB Powered drive, IE No External AC adapter, then that is the problem. Most all Mac's, except maybe the true desktop Mac Pro models, don't put out enough power from one USB port to fully power up the drive. Even if the light on the drive, if it has an light on it, comes on the drive is not getting enough power to work correctly.
You need a Y USB cable to connect to 2 USB ports at the same time to supply enough power to the drive for it to work correctly.

Similar Messages

  • Why do my panels not work in CC 2014

    I made my own panels in CC but they don't work in CC 2014. I miss them.

    It's the latter. Thank you for answering my question.
    Op 21 jun. 2014, om 09:42 heeft Trevor Dennis <[email protected]> het volgende geschreven:
    Why do my panels not work in CC 2014
    created by Trevor Dennis in Photoshop General Discussion - View the full discussion
    Are you talking about a custom workspace, or actual panels made with Configurator?  If the former, then go Preferences > Sync settings.  If the latter, then those Flash panels no longer work in CC 2014.  Check out any of the multiple threads about Extensions being greyed out.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6481073#6481073
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • MBP 2014 retina, forcing usb 3.0 to work in 2.0

    Dear all,
    I am having big troubles to make work my audio interface (Korg Kronos USB 2) in my new Macbook Pro 2014 retina with Yosemite. I have tried with a Macbook Pro 2010 with Yosemite and works perfectly (both devices are 2.0).
    However, seems there is a an issue between USB2 and USB 3.... have tried switching ports, using 2.0 hubs (powered and unpowered) and results remains the same: audio drops, clicks, etc.
    Question: Is there a way to set a USB 3.0 port to work as 2.0 only ? where exactly into system preferences?
    Question 2: is there another way to make USB 2.0 devices work properly in USB 3.0 ports?
    Many thanks in advance...
    Kind regards

    I will definitely keep this in mind as a backup as I would prefer to not have to purchase anything else. Thanks for the suggestion though!

  • Creative Cloud Application does not install on late 2014 Retina iMac.

    I am already user of PS CC 2014 and LR for about a year. Until now this worked flawlessly on a different Mac. After migration to new machine Creative Cloud app stopped working (actually this was the ONLY app that did not work after migration, one of about 100 others). I uninstalled all CC products and attempted a clean install from administrative account, i.e. install from freshly downloaded Creative Cloud installer from Adobe web site failed. Relevant diagnostic report (top part) attached below.
    Need help immediately.
    Process:               Creative Cloud [460]
    Path:                  /Applications/Utilities/Adobe Creative Cloud/*/Creative Cloud.app/Contents/MacOS/Creative Cloud
    Identifier:            com.adobe.acc.AdobeCreativeCloud
    Version:               1.8.1.451 (???)
    Code Type:             X86 (Native)
    Parent Process:        ??? [1]
    Responsible:           Creative Cloud [460]
    User ID:               501
    Date/Time:             2014-12-18 10:54:01.390 -0800
    OS Version:            Mac OS X 10.10.1 (14B25)
    Report Version:        11
    Anonymous UUID:        CFB00717-0E16-24C4-DDFA-4ED1092A0117
    Time Awake Since Boot: 100 seconds
    Crashed Thread:        0  CrBrowserMain  Dispatch queue: com.apple.main-thread
    Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000027d1e35c
    VM Regions Near 0x27d1e35c:
        mapped file            000000000d00c000-000000000d2f9000 [ 2996K] rw-/rwx SM=COW  /private/var/folders/*/*.csstore
    -->
        MALLOC_TINY            000000007be00000-000000007c000000 [ 2048K] rw-/rwx SM=COW 
    Application Specific Information:
    objc_msgSend() selector name: release
    Thread 0 Crashed:: CrBrowserMain  Dispatch queue: com.apple.main-thread
    0   libobjc.A.dylib               0x962b20a7 objc_msgSend + 23
    1   com.apple.CoreFoundation       0x90b9089f _CFAutoreleasePoolPop + 47
    2   com.apple.AppKit               0x97989180 -[NSApplication finishLaunching] + 745
    3   com.apple.AppKit               0x97988ab0 -[NSApplication run] + 143
    4   libcef.dylib                   0x04603e17 0x43f9000 + 2141719
    5   libcef.dylib                   0x0460361c 0x43f9000 + 2139676
    6   libcef.dylib                   0x046376f8 0x43f9000 + 2352888
    7   libcef.dylib                   0x0465011e 0x43f9000 + 2453790
    8   libcef.dylib                   0x04636d6a 0x43f9000 + 2350442
    9   libcef.dylib                   0x0447022f 0x43f9000 + 487983
    10  HEX.dylib                     0x0437ec2a HEXMessageProcessor::runLoop(std::string const&) + 378
    11  HEX.dylib                     0x043517e8 0x434f000 + 10216
    12  HEX.dylib                     0x0438661d HEXMessageProcessor::processMessage(std::string const&, std::string const&, ProcessMessageOutput&, MessageObject const&) + 77
    13  HEX.dylib                     0x0434feaf processMessage + 175
    14  NXGCore.dylib                 0x00275c30 ExternalGateway::sendMessageToApplet(MessageObject const&, MessageStruct const*, bool (**)(void const*), char const**) + 896
    15  NXGCore.dylib                 0x00275753 ExternalGateway::handleMessage(MessageObject const&, MessageStruct const*, bool (**)(void const*), char const**) + 435
    16  NXGCore.dylib                 0x0027636e ExternalGateway::processMessageFromOutside(MessageStruct const*, bool (**)(void const*)) + 302
    17  com.adobe.acc.AdobeCreativeCloud 0x000b04b5 start + 20085
    18  com.adobe.acc.AdobeCreativeCloud 0x000b44d5 start + 36501
    19  com.adobe.acc.AdobeCreativeCloud 0x000ac9d9 start + 5017
    20  com.adobe.acc.AdobeCreativeCloud 0x000ab98a start + 842
    21  com.adobe.acc.AdobeCreativeCloud 0x000b096e start + 21294
    22  com.adobe.acc.AdobeCreativeCloud 0x000ab675 start + 53

    Jeff,
    thanks for the suggestion. I see your point, I actually tried to use uninstallers, but PS CC 2014 uninstaller throws off an error (not specific, unfortunately). I think I try to do a complete erase, followed by clean installation of Mac OS X, followed by manual re-installation of my apps and will just move my docs from full backup I made before migration.
    Any idea what actually may have caused the problem? What I see is CC app installer going through initialization, then it is downloading something for a short time then it just disappears. Greyed out icon of CC app briefly appears in menubar then it is gone. All Adobe crash logs as well as diagnostic logs generated during this time are not that informative. Looks like a few of the threads crash very soon after initialization…
    thanks again for the time you took to answer
    Jacek

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • TK Actions panels not installed un PS CC 2014

    I use the TK Actions Panel in PS CC by loading them through the menu Extension.
    Now in PS CC 2014, the Extension menu is still Grey and i can not installed the TK Actions Panel.
    Does anyone know how to proceed?
    Thanks in advance
    Olivier Lebrethon

    I am not sure if TK Actions Panel is Flash based extension.  Flash based extensions are not supported by PS CC 2014 anymore. Please refer to http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html, http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    And http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins (scroll down to "Why don’t my 3rd Panels show up in the 2014 release of Photoshop CC? What happened to Oil Paint, Mini-Bridge & Kuler?”)
    You have to continue to use it in PS CC until its HTML based counterparts become available.

  • I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

    I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

    I have the same issue on my iPhone 5s
    I've closed the app and re-booted the phone several times but it did not resolve the issue.
    Upgrading to iOS 8.0.2 did not resolve it either.
    Erasing the iPhone and restoring from a backup did not resolve it.
    I'm not sure what else to do.

  • I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Wil

    I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Will this resolve my issue?

    any advise..?

  • Extensions (Add-ons) shown in Extension manager are not in Photoshop cc 2014

    I started with Photoshop cc and downloaded several Add-ons which I used, particularly Adobe Watermark. When Photoshop cc 2014 was released we realised that the majority of these Add-ons would not work in this new edition of Photoshop. Consequently I have to also run Photoshop cc as well to allow me to use these Add-ons.
    If I open Adobe Extension Manager, and select under Products I see a list of all the Add-ons that work in Photoshop cc, which is correct. However if I select Photoshop cc 2014 I see a long list ( 16 Add-ons) which have enabled ticked by the side of the name. Only 5 of these actualy show  in Photoshop cc 2014, so something is wrong here.
    I assume that Adobe Watermark is an Adobe product, so when are Adobe going to sort this out, and the problem in Adobe Extension Manager?

    Flash based extensions are not supported by PS CC 2014 anymore. Please refer to http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html, http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    And http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins (scroll down to "Why don’t my 3rd Panels show up in the 2014 release of Photoshop CC? What happened to Oil Paint, Mini-Bridge & Kuler?”)
    If some extensions are not supported by PS CC 2014, you have to continue to use them in PS CC until their HTML based counterparts become available.

  • Apps appear in EM 7.3.2.39 but do not appear in cc 2014

    Apps appear in EM 7.3.2.39 but do not appear in cc 2014. This is a new laptop.  PS cc 2014 works fine, but no extension Apps.
    Thanks
    Ronace

    Flash based extensions are not supported by PS CC 2014 anymore. Please refer to http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html,http://blogs .adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    And http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins (scroll down to "Why don’t my 3rd Panels show up in the 2014 release of Photoshop CC? What happened to Oil Paint, Mini-Bridge & Kuler?”)
    If some extensions are not supported by PS CC 2014, you have to continue to use them in PS CC until their HTML based counterparts become available.

  • Extract assets not found in Photoshop 2014 (updated version)

    Extract assets tool not found in Photoshop 2014 (updated version). How do i get this tool available for me?

    And thanks for reporting back. Glad you got it sorted out.
    The naming convention can be misleading.
    People use CC when they mean CC 2014.  aka v. 14  and v. 15 respectively.
    But Adobe is labeling their products as suite groups.  CS 6, CC, CC 2014.
    Gene

  • Extension panel greyed out in cc 2014

    how do i get the extension panel to work in cc 2014 it is greyed out?

    I don't think it's a bug. As mentioned below, for the plugins to work, they need to be updated to work with the new architecture that Adobe is using for the 2014 apps. Many devs have already announced updates are available for their plugins, like Red Giant, and many others on the way. So check with each plugin developer to see if updates are available.
    Again, please keep in mind that Adobe haven't specifically said this. But it's documented that plugin developers have had the new architecture specs for at least a few weeks, and have been working on updates because the new versions are NOT COMPATIBLE with the old plugins.
    Brent

  • Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

    Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

    Here is more information and hopefully a better explanation. My version of
    LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits
    done in the basic module. That means that I can correct exposure,
    highlights, shadows etc. but once I go to another picture and returned to
    the edited one the histogram (on the edited photo) and specifically the
    clipping triangles are white or some other color. This is normally suppose
    to indicate that some channel or all channels are clipped in the
    highlight/shadow areas. If I adjust any slider in the Basic panel even as
    little as one +/- value or press the J-key, the histogram will now show the
    original edit. Moving on to another photo and then returning to to
    previously edited one and again the edits are "not saved" and I have to hit
    the J-key or adjust a slider to see the previously edited information
    reflected in the histogram.
    This is especially frustrating for fours reasons. If I have edited a shoot
    and return to it I cannot see from the clipping information whether the
    original edit was correct and of course I might re-edit it (to some now
    incorrect value). This brings up the second issue synchronization. I can't
    rely on it because if I go back to fine tune a specific image in the batch
    the triangles are white or some other color for that and every image. I have
    to hit the J-key to show/hide clipping or the back slash key to see
    before/after previews. This is the third issue which is very time consuming
    and inefficient regarding my workflow. The forth issue is that I have
    noticed that normally when an image is saved in PS, LR adds a copy of the
    saved version to its catalogue. I have noticed that the PS to LR saves are
    all wrong in terms of exposure (they are much lighter in tone) than the
    original LR edit and the PS edit on my screen. If I check the PS to LR photo
    in LR I notice that the Basic panel values have been changed and that I have
    to sync the image with the originally edited RAW/NEF LR file to get it to
    look the same.
    Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge
    monitor to view my NEF files. I have reverted back to using LR 4 however I
    am not sure if I should expect compatibility problems with Camera Raw 7.4 in
    LR 4 vs. Camera Raw 8.6 in LR 5.
    Note 2.) I am going to do an import converting everything to .dng  to see if
    this is a work around.
    Note 3). I would be interested in knowing if this issue is related to the PS
    RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
    Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X
    10.10.1
    Hopefully someone else has noticed this problem. Any shared information
    would be valuable. Thanks for the reply.

  • 5230 battary is not tightly

    Battery is not tightly and the phone is off very often.
    Battery broke back cover.
    The phone is under warranty.
    In the service they gave me a sticker that came off in 5 second.
    In the service they said the sticker msut be in the phone initially but it was not. And another phones in the shops dont have any stickers.
    I think its factoru defect initially but he say I must use stickers - I must come to their office every time for stickers.
    The phone cant work normal without sticker.
    Can you say - maybe be sticker a warranty repair or I must ask for money or another good phone?

    Which firmware you are using? Dial *#0000# know. The latest firmware out there is V21. Update your phone. See if it works.
    Please thank me by giving 'KUDOS' star. It will help me to serve you better.
    Currently using N82 and 5230. Next would be N?

  • My iPad air back camera is not clear why?

    My iPad air back camera is not clear why.

    Hello Nina Izurin,
    While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

Maybe you are looking for