Back button isn't displaying
The back button isn't displaying properly. It can only go to the previous page if I right click the arrow.
http://i.imgur.com/By6GSB6.png
nevermind. restarted the browser, it's fine
Similar Messages
-
Actually, all my details are in that looong question I asked. ; )
I am ready to go back to 3.6 or whatever version I had because 4 and 5 have had these issues. I tried 4 before but now that I have 5 and the same issue, I remember that I saw this before.
As I was typing this note, I looked up and saw the back button is actually working on this site. Weird.
Also, there isn't a button next to the back and forward so I can see my history. Where is that, now? Sometimes, I want to go back 3 or 4 pages at once without loading each page the slow way. Awww, what am I saying? You all know what I mean. :\
I am using Windows 7 and have been using Firefox for years, so I am familiar with it and it is my only browser of choice so I hope someone can help me. Thanks in advance.Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
How can I go back several pages? The back button no longer displays multiple previous pages
Click-hold the unified Back / Forward button, or right-click it to get the Back / Forward history for that tab.
Or install this extension to get the old "drop-marker" button restored. <br />
https://addons.mozilla.org/en-US/firefox/addon/backforedrop/ -
Back Button - Why does it go back a FRAME (framed pages) instead a PAGE ?
In a "framed" site, the Back button causes the display going back one frame, following back goes back another frame, 3 framed page needs 3 backs to finally beeing back on previous page. Why ? Error in page setup or in handling of FF?
Rgds JordiThis is clearly a heavy bug in FF4, and now also continued in FF5.
The typical "main" window on the right side, within a frameset, is not going back when using the Back function, when this window is targeted from any JavaScript in the menu in the window on the left (or top) side.
If a "main" window is targeted instead by plain HTML, or out of an Applet, the back function in FF4 and FF5 behave correctly.
This bug can be verified by querying anything from a site like
http://www2.rgzm.de/navis2/home/FramesE.cfm
All websites using JavaScript based frameworks this way won't work correctly anymore in FF4 and FF5.
Thus, when the menu in a left frame is JavaScript driven, FF4 and FF5 don't now about its history anymore. This worked in FF3 and it is perfectly working in all other browsers. This serious bug will force users of any JavaScript based menu in a website to switch to one of these other browsers.
Its not clear to me whether the JavaScript engine does something wrong, or whether FF4 and FF5 itself are not keeping track correctly. What is clear, however, that this basci functionality was broken somewhere between FF3 and FF4.
Albert -
Problem displaying drill down STANDARD ALV for a particular record after pressing back button
I have a simple interactive ALV grid report. NOT 'OO'. It display correctly on initial execution. AT the moment, 6 records. I want it to work such that if i click record '1', a drill-down version of that ALV with only that one record clicked is displayed. This currently occurs correctly. The problem arises when i click the back button and want to click on a new record, say in the 2nd row..this new 2nd row record is not displayed. The first one is displayed again. I tried clearing and fiddling around but then the last record is displayed. I have used the 'ID' field as a 'hotspot' getting picked up by sy-tabindex. Maybe it could be that i shouldn't loop and use a work area e.g in my select statement. i'm not so sure i've looked around, and tried a few things. I can't get it right yet. My code is below:
*& Report ZALV
REPORT ZALV.
TABLES: ZCONTACT.
TYPE-POOLS: slis. "slis contains all of the ALV data types.
TYPES: BEGIN OF ty_zcontact.
INCLUDE STRUCTURE zcontact.
TYPES: icon TYPE char4, "field holding traffic light value- adding a column to internal table to hold the traffic light
END OF ty_zcontact.
DATA: "fieldcatALOG TYPE slis_t_fieldcat_alv WITH HEADER LINE,
it_zcontact TYPE TABLE OF ty_zcontact,"declares an internal table of type ZCONTACT
wa_zcontact TYPE ty_zcontact,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid,
g_variant TYPE disvariant,
gx_variant TYPE disvariant,
g_save TYPE c VALUE 'X',
it_fieldcat TYPE slis_t_fieldcat_alv,"declares field catalog table of line type alv
wa_fieldcat TYPE slis_fieldcat_alv, "declares the work area of the field catalog
it_list_top_of_page TYPE slis_t_listheader.
DATA: it_fieldcat1 TYPE slis_t_fieldcat_alv,
wa_fieldcat1 TYPE slis_fieldcat_alv.
DATA: V_FIELD(30) TYPE C,
V_VALUE(10) TYPE C.
"izontact TYPE TABLE OF zcontact.
"i_logo TYPE OT.
"ls_layout TYPE slis_layout_alv.
**Selection Screen details
*SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
*PARAMETERS: variant like disvariant-variant.
*SELECTION-SCREEN END OF BLOCK B1.
SELECT-OPTIONS:
age FOR wa_zcontact-age,
lastnme FOR wa_zcontact-lastname.
**Getting default variant
* AT SELECTION-SCREEN ON age.
* SELECT SINGLE age FROM zcontact INTO wa_zcontact-age WHERE age = age.
* IF sy-subrc NE 0.
* MESSAGE:'That age does not exist mate, Please enter another age' TYPE 'E'.
* ENDIF.
INITIALIZATION.
*gx_variant-report = sy-repid.
*CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
*EXPORTING
* I_SAVE = G_SAVE
* CHANGING
* CS_VARIANT = GX_VARIANT
* EXCEPTIONS
* NOT_FOUND = 2.
*IF SY-SUBRC = 0.
* VARIANT = GX_VARIANT-VARIANT.
* ENDIF.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_FIELDCATALOG.
PERFORM DISPLAY_ALV_REPORT.
PERFORM top_of_page.
"g_repid = sy-repid.
*Fetch data from the database
FORM DATA_RETRIEVAL.
SELECT * FROM zcontact INTO TABLE it_zcontact WHERE age IN age AND lastname IN lastnme.
"assigning traffic light colour to each row based on a condition
* IF wa_zcontact-age GE 65.
* wa_zcontact-icon = 1. "Red Traffic Light
* ELSEIF wa_zcontact-age BETWEEN 40 AND 64.
* wa_zcontact-icon = 2. "Yellow traffic light
* ELSE.
* wa_zcontact-icon = 3." Green traffic light
* ENDIF.
* MODIFY it_zcontact FROM wa_zcontact TRANSPORTING icon.
* CLEAR wa_zcontact.
ENDFORM.
FORM BUILD_FIELDCATALOG.
*Build field catalog
wa_fieldcat-fieldname = 'ID'.
"wa_fieldcat-seltext_m = 'The Contact ID'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LASTNAME'.
"wa_fieldcat-seltext_m = 'Contact Lastname'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'FIRSTNAME'.
"wa_fieldcat-seltext_m = 'Contact Firstname'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'DOB'.
"wa_fieldcat-seltext_m = 'Date Of Birth'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'TEL'.
"wa_fieldcat-seltext_m = 'Telephone Number'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ADDRESS'.
"wa_fieldcat-seltext_m = 'The Address'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'OCCUPATION'.
"wa_fieldcat-seltext_m = 'The Occupation'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'WEIGHT'.
"wa_fieldcat-seltext_m = 'WEIGHT'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AGE'.
"wa_fieldcat-seltext_m = 'AGE OF THE CONTACT'.
wa_fieldcat-do_sum = 'X'. "Display column total
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'SALARY'.
"wa_fieldcat-seltext_m = 'SALARY'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
gd_layout-lights_fieldname = 'ICON'.
ENDFORM.
FORM DISPLAY_ALV_REPORT.
gd_repid = sy-repid.
*Pass data and field catalog to ALV function module to display ALV list
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = it_fieldcat
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP_OF_PAGE'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'ZCONTACT'
i_save = 'X'
is_variant = g_variant
is_layout = gd_layout
TABLES
t_outtab = it_zcontact
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM.
FORM top_of_page.
*ALV Header declarations
DATA: it_listheader TYPE slis_t_listheader,
wa_listheader TYPE slis_listheader,
t_line like wa_listheader-info,
ld_lines TYPE I,
ld_linesc(10) TYPE C.
wa_listheader-typ = 'H'.
wa_listheader-info = 'Contact Details'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = sy-repid.
wa_listheader-key = 'Program Name:'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = sy-uname.
wa_listheader-key = 'User Name:'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-key = 'Run Date :'.
CONCATENATE sy-datum+6(2)
sy-datum+4(2)
sy-datum(4)
INTO wa_listheader-info
SEPARATED BY '/'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-key = 'Time :'.
CONCATENATE sy-uzeit(2)
sy-uzeit+2(2)
sy-uzeit+4(2)
INTO wa_listheader-info
SEPARATED BY ':'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader
i_logo = 'KLOGO'.
ENDFORM. "top_of_page
*& Form sub_user_command
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELTAB TYPE SLIS_SELFIELD.
CASE P_UCOMM.
WHEN '&IC1'.
CASE p_seltab-fieldname.
WHEN 'ID'.
READ TABLE it_zcontact INTO wa_zcontact INDEX p_seltab-tabindex.
PERFORM DATA_RETRIEVAL1.
PERFORM BUILD_FIELDCATALOG1.
PERFORM SECOND_GRID.
ENDCASE.
ENDCASE.
ENDFORM. "
FORM DATA_RETRIEVAL1.
SELECT * FROM zcontact INTO TABLE it_zcontact WHERE id EQ wa_zcontact-id.
ENDFORM.
FORM BUILD_FIELDCATALOG1.
*Build field catalog
CLEAR: wa_fieldcat, it_fieldcat.
wa_fieldcat-fieldname = 'ID'.
"wa_fieldcat-seltext_m = 'The Contact ID'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LASTNAME'.
"wa_fieldcat-seltext_m = 'Contact Lastname'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'FIRSTNAME'.
"wa_fieldcat-seltext_m = 'Contact Firstname'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM.
FORM SECOND_GRID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IT_FIELDCAT = IT_FIELDCAT
i_structure_name = 'ZCONTACT'
i_callback_user_command = 'USER_COMMAND'
TABLES
T_OUTTAB = IT_ZCONTACT.
ENDFORM.Hi Ten Mariga,
I wonder why the second select Query is needed at all instead you can use
---> Not Needed
FORM DATA_RETRIEVAL1.
SELECT * FROM zcontact INTO TABLE it_zcontact WHERE id EQ wa_zcontact-id.
ENDFORM.
----> Instead you can do
READ TABLE it_zcontact INTO wa_zcontact INDEX p_seltab-tabindex.
Append wa_zcontact to Second_table.
And you can use the Second_table to display the second ALV. The second Select Query will affect the performance too.
Cheers,
Krishnakumar B. -
Every time I click the "back" button, Firefox reloads the previous page I was on. How do I disable the reload and have Firefox display the cached/prior page version? The whole point of going "back" is to see what we were just looking at.. I don't want a refreshed version of it. Any help would be greatly appreciated! I am running version 3.6.12.
No problem. It's not a request that's been seen much if at all to be honest. I rely on them myself.
You can always feel free to provide feedback to Apple though.
http://www.apple.com/feedback/ -
My 4th Gen iPod Nano isn't displaying a "Use iTunes to restore" message, but iTunes is displaying a restore message when I connect it. I have original music that I can't back up on my iPod. Is there any way that I can fix the iPod without restoring it?
It's not designed to work like this. When you sync, the iPod stores some information that basically says 'this iPod belongs to computer xyz'. Apple did this to prevent copyright issues (syncing someone else's music).
If you really want to do this, you'll have to at least tie both iTunes installations to the same account. Maybe have them sync with each other. -
Problem with ALV Grid Display screen Back Button
Dear Friends ,
I have an ALV Grid Display,Here am facing a problem for my 'Back' button,i haven't defined any PF Status and is using the standard one.But after the Display when i press Back Button a blank Screen is appearing n then again i have to press back button to go to my Selection Screen.
Please Suggest if i have to take care of something else.
I want my Selection Screen when i press Back on my Display Screen.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
Thanks and Regards,
AshwiniHi Vijay ,
No i dont have any write statement in my proggram.
Here it is
REPORT ZRMMPD01A NO STANDARD PAGE HEADING.
TABLES : EQUI,SER03,MKPF,OBJK.
TYPE-POOLS : SLIS.
DATA IT_EQUI LIKE EQUI OCCURS 0 WITH HEADER LINE.
DATA IT_OBJK LIKE OBJK OCCURS 0 WITH HEADER LINE..
DATA IT_SER03 LIKE SER03 OCCURS 0 WITH HEADER LINE.
DATA IT_MKPF LIKE MKPF OCCURS 0 WITH HEADER LINE .
DATA : BEGIN OF IT_DISPLAY OCCURS 0,
MATNR LIKE EQUI-MATNR,
SERNR LIKE EQUI-SERNR,
BWART LIKE SER03-BWART,
WERK LIKE SER03-WERK,
CHARGE LIKE SER03-CHARGE,
LAGERORT LIKE SER03-LAGERORT,
MBLNR LIKE SER03-MBLNR,
MJAHR LIKE SER03-MJAHR,
ZEILE LIKE SER03-ZEILE,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
USNAM LIKE MKPF-USNAM,
XBLNR LIKE MKPF-XBLNR,
END OF IT_DISPLAY.
DATA : WA_DISPLAY LIKE IT_DISPLAY.
DATA IT_FINAL LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA IT_TEMP LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA :I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_EVENTS TYPE SLIS_T_EVENT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR EQUI-MATNR MATCHCODE OBJECT MCD,"OBLIGATORY
S_SERNR FOR EQUI-SERNR, "MATCHCODE OBJECT MCD OBLIGATORY
S_MBLNR FOR SER03-MBLNR MATCHCODE OBJECT MCD,
S_BWART FOR SER03-BWART MATCHCODE OBJECT MCD,
S_WERK FOR SER03-WERK MATCHCODE OBJECT MCD,
S_LAGET FOR SER03-LAGERORT MATCHCODE OBJECT MCD,
S_BUDAT FOR MKPF-BUDAT MATCHCODE OBJECT MCD,
S_XBLNR FOR MKPF-XBLNR MATCHCODE OBJECT MCD.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X',
R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
START-OF-SELECTION.
*Fetch Data.
PERFORM GET_DATA.
*Fill Display Fields.
PERFORM FILL_TABLE.
*Segregate data according to radio button selection.
PERFORM SELECT_CONDITION.
*Fill The Feild catalog.
PERFORM FIELD_CATALOG.
*Display Output.
PERFORM OUTPUT_DISPLAY..
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA.
SELECT * FROM EQUI INTO TABLE IT_EQUI
WHERE MATNR IN S_MATNR
AND SERNR IN S_SERNR.
SELECT * FROM OBJK INTO TABLE IT_OBJK
FOR ALL ENTRIES IN IT_EQUI
WHERE EQUNR = IT_EQUI-EQUNR.
SELECT * FROM SER03 INTO TABLE IT_SER03
FOR ALL ENTRIES IN IT_OBJK
WHERE OBKNR = IT_OBJK-OBKNR
AND MBLNR IN S_MBLNR
AND BWART IN S_BWART
AND WERK IN S_WERK
AND LAGERORT IN S_LAGET.
SELECT * FROM MKPF INTO TABLE IT_MKPF
FOR ALL ENTRIES IN IT_SER03
WHERE MBLNR = IT_SER03-MBLNR
AND BUDAT IN S_BUDAT
AND XBLNR IN S_XBLNR.
ENDFORM. " GET_DATA
*& Form FILL_TABLE
text
--> p1 text
<-- p2 text
FORM FILL_TABLE.
LOOP AT IT_EQUI.
LOOP AT IT_OBJK.
IF IT_OBJK-EQUNR <> IT_EQUI-EQUNR.
SKIP.
ELSE.
READ TABLE IT_SER03 WITH KEY OBKNR = IT_OBJK-OBKNR.
IF SY-SUBRC = 0.
WA_DISPLAY-MATNR = IT_EQUI-MATNR.
WA_DISPLAY-SERNR = IT_EQUI-SERNR.
WA_DISPLAY-BWART = IT_SER03-BWART.
WA_DISPLAY-WERK = IT_SER03-WERK.
WA_DISPLAY-CHARGE = IT_SER03-CHARGE.
WA_DISPLAY-LAGERORT = IT_SER03-LAGERORT.
WA_DISPLAY-MBLNR = IT_SER03-MBLNR.
WA_DISPLAY-MJAHR = IT_SER03-MJAHR.
WA_DISPLAY-ZEILE = IT_SER03-ZEILE.
READ TABLE IT_MKPF WITH KEY MBLNR = IT_SER03-MBLNR.
IF SY-SUBRC = 0.
WA_DISPLAY-BUDAT = IT_MKPF-BUDAT.
WA_DISPLAY-BKTXT = IT_MKPF-BKTXT.
WA_DISPLAY-USNAM = IT_MKPF-USNAM.
WA_DISPLAY-XBLNR = IT_MKPF-XBLNR.
ENDIF.
ENDIF.
ENDIF.
IF NOT WA_DISPLAY IS INITIAL.
APPEND WA_DISPLAY TO IT_DISPLAY.
CLEAR WA_DISPLAY.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDFORM. " FILL_TABLE
*& Form FIELD_CATALOG
text
--> p1 text
<-- p2 text
FORM FIELD_CATALOG.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MATNR'.
FIELDCAT-SELTEXT_M = 'Material Number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'SERNR'.
FIELDCAT-SELTEXT_M = 'Serial number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MBLNR'.
FIELDCAT-SELTEXT_L = 'Number of material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BWART'.
FIELDCAT-SELTEXT_M = 'Movement type'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'WERK'.
FIELDCAT-SELTEXT_M = 'Plant'.
FIELDCAT-OUTPUTLEN = 5.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'CHARGE'.
FIELDCAT-SELTEXT_M = 'Batch number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'LAGERORT'.
FIELDCAT-SELTEXT_M = 'Storage Location'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MJAHR'.
FIELDCAT-SELTEXT_M = 'Material doc. year'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'ZEILE'.
FIELDCAT-SELTEXT_L = 'Item in material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BUDAT'.
FIELDCAT-SELTEXT_L = 'Posting date in the document'.
FIELDCAT-OUTPUTLEN = 10.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BKTXT'.
FIELDCAT-SELTEXT_L = 'Document header text'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'USNAM'.
FIELDCAT-SELTEXT_M = 'User name'.
FIELDCAT-OUTPUTLEN = 15.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'XBLNR'.
FIELDCAT-SELTEXT_L = 'Reference document number'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
ENDFORM. " FIELD_CATALOG
*& Form DISPLAY_OUTPUT
text
--> p1 text
<-- p2 text
FORM OUTPUT_DISPLAY.
IF R1 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_DISPLAY
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ELSEIF R2 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form SELECT_CONDITION
text
--> p1 text
<-- p2 text
FORM SELECT_CONDITION.
IF R2 = 'X'.
CLEAR WA_DISPLAY.
SORT IT_DISPLAY BY MATNR SERNR MBLNR ZEILE.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY WHERE ZEILE = '0002'.
READ TABLE IT_DISPLAY WITH KEY MATNR = IT_DISPLAY-MATNR
SERNR = IT_DISPLAY-SERNR ZEILE = '0001'.
IF SY-SUBRC = 0.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
SORT IT_DISPLAY BY MATNR SERNR BWART MBLNR.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY.
IF WA_DISPLAY IS INITIAL.
WA_DISPLAY = IT_DISPLAY.
ENDIF.
LOOP AT IT_DISPLAY WHERE MATNR = WA_DISPLAY-MATNR
AND SERNR = WA_DISPLAY-SERNR.
IF IT_DISPLAY-BUDAT > WA_DISPLAY-BUDAT.
WA_DISPLAY = IT_DISPLAY.
ELSE.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
APPEND WA_DISPLAY TO IT_TEMP.
CLEAR WA_DISPLAY.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP.
IF NOT IT_TEMP[] IS INITIAL.
IT_FINAL[] = IT_TEMP[].
ENDIF.
ENDIF.
ENDFORM. " SELECT_CONDITION
Regards,
Ashwini -
Why isn't my back button in Safari not working? I am constantly resetting Safari.
Why isn't my back button in Safari not working? I am constantly resetting Safari.
Cheryl...
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db (or ApplicationCache.db) file from the com.apple. Safari folder to the Trash.
Restart your Mac. Launch Safari. Try the back button.
~ (Tilde) character represents the Home folder. -
Using Back Button after Display Report
Hi,
Need an advice, i need to customize the standard BACK button after report had been displayed, trying to use AT USER-COMMAND, but still not avail..
anyone can come with example will help me a lot.
ThanksHi badz lee,
Just change the function code 'BACK' to 'ZBACK' in your custom GUI staus.
Then write your own logic for the custmer needs.
Hope this code helps.
*& Report ZVK_TEST
REPORT zvk_test.
TABLES:ekko."for select option only
SELECT-OPTIONS:s_ebeln FOR ekko-ebeln.
DATA:lt_ekko TYPE TABLE OF ekko,
lw_ekko TYPE ekko.
START-OF-SELECTION.
SET PF-STATUS 'STLI'."copy status STLI of program SAPMSSY0.
SET TITLEBAR 'TITLE'.
SELECT * INTO TABLE lt_ekko
FROM ekko
WHERE ebeln IN s_ebeln.
LOOP AT lt_ekko INTO lw_ekko.
WRITE:/ lw_ekko-ebeln,
lw_ekko-bukrs,
lw_ekko-bstyp,
lw_ekko-bsart.
ENDLOOP.
END-OF-SELECTION.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'ZBACK'.
PERFORM back_function."Your logic
WHEN OTHERS.
ENDCASE.
*& Form BACK_FUNCTION
FORM back_function .
LEAVE PROGRAM.
ENDFORM. " BACK_FUNCTION -
Disable page display when back button is pressed after logout
hi,
I dont want the old pages to appear once the back button is pressed after loggin g out. That is .... when logged in, if the user presses back button then his previous pages must be shown....but once the user logs out and then if he presses back button then some message like session has been closed....like message should be displayed.
Hope you understood the problemIf you expire a page then back button will not take it to the previous page.
expire is a HTTP-EQUIV meta tag in the header of the page. You can set the content to some time in the "past" when serving the page first time.
Expires
This tells the browser the date and time when the document will be considered "expired." If a user is using Netscape Navigator,
a request for a document whose time has "expired" will initiate a new network request for the document.
An illegal Expires date such as "0" is interpreted by the browser as "immediately." Dates must be in the RFC850 format, (GMT format):
<META HTTP-EQUIV="expires" CONTENT="Wed, 26 Feb 1997 08:21:57 GMT"> Hope this works for you, there are browser dependencies as well.
vr,
Sudhakar B. -
Back buttons wont work on Canon 70D and images wont display - help!
Hi guys. so i was shooting at tthe beach with my cannon 70d, i took some 2" long exposures with flash on then my camera shutter started to lag and the camera would say "busy" alot. after a few pictures the back buttons on my camera stopped working (like delete, menu, options and such) and the images i took would not display on the screen. my hands were a bit wet while i was holding the camera but shoud that be an issue since it is weather sealed? please let me know what to do.
GeorgeCKW wrote:
so u suggest i should take it to repair it at the store? yes it was salty water.
There may be nothing wrong with your camera.
You mention taking long exposures with it. If you had Long Exposure Noise Reduction enabled, that will cause a delay and "busy" warning. The way LENR works is right after you take your shot, the camera automatically takes a second shot of the same duration, with the shutter closed. This "blank" shot is then used to determine where noise is occuring and that data is used to "subtract" the noise from the first shot. While the second "blank" shot is being made the camera is in "busy" mode. If your first shot was 2 seconds, then the camera will show "busy" for another 2 seconds while LENR takes the second shot. If your first exposure was 30 seconds, then there will be an additional 30 second busy period, etc. You can cancel the second shot from happening by turning the camera off, but doing so will delete both the original shot and the second "blank" shot. To prevent LENR from automatically operating, it can be turned off in the camera's menu. With it off, your images will typically show more digital "noise" as a result, of course, so you should plan to apply some noise reduction later during post-processing.
Another possibility, you mention using flash. There are a lot of variables, but it's also possible the camera was showing "busy" while the flash was recycling (recharging, if you will). If using the built-in flash in particular, the duration of recycling can be slower than it would be with an external, self-powered flash. This is because the built-in relies upon the camera's main battery for power. As the power level of that battery is reduced, the duration of recycling will grow longer.
Also when using flash, after a certain number of "pops" are done within a certain time period, most flashes have a protection featyre to prevent them from overheating, by stopping any additional flashes for a while, giving the flash time to cool off.
If you merely touched the camera with wet hands, it's possible but not certain that the dampness might have damaged the camera in some way. Essentially, some water has to intrude into the circuitry and cause the camera to short out to cause a problem. The 70D has some sealing and resistance, though maybe not as much as more high end cameras. But no Canon DSLR is completely waterproof, either. I'd be particularly careful if changing memory cards or lens or batteries, not to let water get inside. But I've gotten soaked in a sudden, heavy downpour while carrying a pair of older and less well sealed 30Ds without any problem. Once I got to shelter I turned the cameras off, removed all the batteries & memory cards, removed the lens and propped open the memory card & battery doors, then let them sit to dry for a several days. Both worked just fine afterward.
Unless the camera gets splashed with water... or dunked in it... it's rare for water to get inside. I think it unlikely to happen merely because your hands were wet. But, it only takes a single drop in just the wrong place, so I'm not entirely ruling it out as a possibility, either.
Salt water is worse than fresh water. The salt increases the waters conductivity and is corrosive too. If the outside of the camera got wet from your hands, you might want to wipe it down with a lightly dampened, lint free rag or a pre-moistened "monitor wipe" or similar, just to be sure that any salts or minerals are removed. Stay off the optics of the lens and viewfinder, though. If those need cleaning too, use lens cleaning procedures instead.
I do not recommend putting a camera in rice to dry it out, other than extreme emergencies. Rice gives off dust, which can intrude places you don't want it and make for problems too. Better is to use some sort of dessicant in a package that prevents dust... a lot of people who shoot in humid environments will keep a package of dessicant in their camera bag. For example: 40gm dessicant in aluminum tin with indicator. This can be dried in an oven at low heat and reused over and over. It has a "saturation" indicator on it.
Prevention is the best solution. I recommend getting some sort of protective cover for your camera if you will be using it at the beach a lot. Not just to keep water off it, but also sand can cause problems if it finds it's way into some of the camera's nooks and crannies. There are raincovers you can purchase, or you can simply make one out of a plastic bag, some gaffer or duct tape and rubber bands. For really wet work very close to surf or right in the water, there are fully sealed underwater housing ranging from relatively inexpensive, heavy duty plastic bags that might serve near the surface, to diving rigs that can be used doen to 100 feet or more depth, but cost a whole heck of a lot more. These also often limit the lenses you can use with the camera, and might require special flashes be used.
Hope this helps and your camera is fine.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM -
The "apply" button didn't display when I was using the "write back" option
I followed the "System Administrator's Guide" to configure the write back function, unfortunately,
the "apply" button didn't display. Is there anyone can give some advice? Thanks!Just to check, did yiou restart the presentation services after placing the xml file?
Is the template name in answers "SetKPIValue" consistent with the .xml file as you mentioned?
Now, if you could try by putting a hard coded value in the update statement as well.
Also, is the location where the .xml file is kept is,
ORACLE_INSTANCE/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obipsn/analyticsRes/customMessages
P.S. Numeric columns must contain numbers only. They should not contain any data formatting characters such as dollar signs ($), pound signs or hash signs (#), percent signs (%), and so on. [Oracle Admin Guide]
Edited by: 855532 on Jul 13, 2011 1:52 AM -
How to disable the back button when displaying a form
Hi ,
i have form A calling form B, when form B is displayed i want to disable the
back button in the explorer so as not to allow the user from going back to
form A.
thanks.When you open a new window, call following javascript function also to disable the "back" button.
window.history.forward(1);
It will work. -
My lock button isn't working and I completely forgot that, I turned off my phone to restart it and now I cant turn it back on, Any suggestions?
You need to get the on/off button repaired.
You can try connecting the iPhone to a power source which should power the iPhone on.
Maybe you are looking for
-
I have a iPhone 4 on contract and every now and then it will stop receiving messages when I am in the middle of a conversation. I don't use iMessage as I sometimes go over the limit of my Internet data. So I stick with SMS. And even when I do try wit
-
Clob is not working for bulk data files in PL/SQL XML program
Hi Odie, we took your help to fix the our issue before "https://forums.oracle.com/forums/thread.jspa?threadID=2238458&tstart=105" working fine for : program is working for smaller size data. Issue : now we have problem with the largr size data . gett
-
Hi All, OWB Config Details is as follows. OWB ver 9.2 with Windows NT Oracle 9i. In near future we are expecting changes in source database i.e. source database from existing will change to a new database which may be same or different. The level of
-
How to install software when no finder?
I can't get Finder to open. It has been open just a few times since I upgraded to Lion and now I can't get it at all. How do I install software when I can't move a file to the application folder via Finder?
-
How do i transfer ebook to new computer
I've been issued a new computer at work and need to transfer e-book from old to new. The e-book is for a course that I'm doing. I can't seem to find instructions for doing this. I've authorised both computers but in the process of authorising the