Back dated goods issue early date from the Goods Reciept

Hi Experts,
Can somebody explain the reason why, system allows to record backdated goods issue if goods reciept exist on later date.
Furether details:
First, If i wants to do Goods Issue on 1st of the month which point stocks are zero - System will not allow
Second, goods reciept recorded on 10th of the same month
Third, after the Goods reciept system allows me to do GI for step 1 by inserting posting date 1st of the month
Thanks
KW

The reason for the system behaviour is that at the time of goods issue, the system onlyvalidates whether sufficient stock is available in the posting period and not on the specific posting date. So as described, if you specify a previous date, the stock for the date may be negative, but actually you stock value is always correct.
If you are posting the goods issue in the previous period, the system will issue an error message. But if the postings occur in the same period with different dates, the system will not issue any error.

Similar Messages

  • I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
    iTunes does prompt when it is going to erase a device, and the message is clear.
    She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
    Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
    I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
    She marked this as a solution, so it worked for her.

  • Unable to read data from the SAP Service Marketplace issue

    Good morning, experts.
    I´ve just installed the SAP Download Manager, but I can´t get connected to Marketplace.
    First I tried downloading a file I could see in my Basket Download. Then I deleted it from the basket so I could test only the connection. In both situations I got the same error message: "Unable to read data from the SAP Service Marketplace (...)".
    It is probably due to wrong settings, but I can´t figure it out. My settings are:
    Address: https://websmp205.sap-ag.de/
    User name: S0005951541
    Password: (my password)
    Proxy (my proxy settings)
    Any ideas?

    Thanks for your answer.
    I can see my download basket online. I realize I didn´t delete the items so I could test purely the connection. I am going to do it again.
    I found out I dind´t have permission to download those items, and with the right permission I could download them directly online.
    As long as I have more information I am going to repost this issue on a new forum.
    Thanks.

  • After i erased whole data from the ipod touch 3rd gen. when i put back to sync it. it says in the windows connect to itunes, which i did,i also installed new itunes but still it doesnt recognise . pls help me if u have gone thru same trouble like me.

    after i erased whole data from the ipod touch 3rd gen. when i put back to sync it. it says in the windows connect to itunes, which i did,i also installed new itunes but still it doesnt recognise . pls help me if u have gone thru same trouble like me
    Thanks

    I do not understand what "it says in the windows connect to itunes" means?
    What is "it" and what is "windows"?
    Maybe:
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

    how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.

  • How do i parse data from the second jframe back to the first?

    Hello.
    I have a jFrame were I promt users to keep a list of Names in a jTable. (I keep data for something else, but lets say names.. ) Anyway, afterwords I want to add some extra parameters for each name. So I created a new frame, which is opened when user press an Edit button. The new frame opens and users can add for the specific name some extra data, like age, height, color, sex.. etc. that characterizes this person.
    On this second form i have a save button, which when its pressed i would like to keep this information for this name, so as when user press edit again from the first frame on the same Name the data that previously entered will be loaded (lets say that the user can not enter the say name again)
    I haven' t figured the code for the save Button, but with the rest I am fine.
    Can you give any ideas with structures that I have to use and how the action listener will have to be??
    When I set visible the new form i have made a constructor that loads the new form which have a label with the name of the person that is edited., but how do i parse data from the second form back to the first that is already opened??
    Thanks very much..

    I found it.. it was not so hard afterall..
    anyway, i quote the new code..
    package namelist;
    // Java core packages
    import java.awt.event.*;
    import java.util.*;
    // Java extension packages
    import javax.swing.*;
    import javax.swing.table.*;
    public class NamesGUI extends javax.swing.JFrame {
        //Variables for managing the jTables
        DefaultTableModel tableModel;
        Vector rows,cols;
        String[] colName1 = {"List of Names"};
        ManageJTables mJT = new ManageJTables();
        Hashtable h;
        /** Creates new form ProsAgentGUI */
        public NamesGUI() {
            h = new Hashtable();
            initComponents();
        /** This method is called from within the constructor to
         * initialize the form.
         * WARNING: Do NOT modify this code. The content of this method is
         * always regenerated by the Form Editor.
        private void initComponents() {
            Panel = new javax.swing.JPanel();
            ToolBar = new javax.swing.JToolBar();
            ADD = new javax.swing.JButton();
            EDIT = new javax.swing.JButton();
            REMOVE = new javax.swing.JButton();
            jButton1 = new javax.swing.JButton();
            TScrollPane = new javax.swing.JScrollPane();
            Table = new javax.swing.JTable();
            setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
            setTitle("Names");
            setBackground(new java.awt.Color(0, 51, 51));
            Panel.setBorder(javax.swing.BorderFactory.createTitledBorder("List of Names"));
            ToolBar.setBorder(javax.swing.BorderFactory.createEmptyBorder(1, 1, 1, 1));
            ADD.setText("ADD");
            ADD.setToolTipText("");
            ADD.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
            ADD.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    ADDActionPerformed(evt);
            ToolBar.add(ADD);
            EDIT.setText("EDIT");
            EDIT.setToolTipText("");
            EDIT.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
            EDIT.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    EDITActionPerformed(evt);
            ToolBar.add(EDIT);
            REMOVE.setText("REMOVE");
            REMOVE.setToolTipText("");
            REMOVE.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
            REMOVE.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    REMOVEActionPerformed(evt);
            ToolBar.add(REMOVE);
            jButton1.setText("jButton1");
            jButton1.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    jButton1ActionPerformed(evt);
            ToolBar.add(jButton1);
            rows=new Vector();
            cols= new Vector();
            cols=mJT.addColumns(colName1, cols);
            tableModel =new DefaultTableModel();
            tableModel.setDataVector(rows,cols);
            Table.setModel(tableModel);
            TScrollPane.setViewportView(Table);
            org.jdesktop.layout.GroupLayout PanelLayout = new org.jdesktop.layout.GroupLayout(Panel);
            Panel.setLayout(PanelLayout);
            PanelLayout.setHorizontalGroup(
                PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                .add(ToolBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
                .add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
            PanelLayout.setVerticalGroup(
                PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                .add(PanelLayout.createSequentialGroup()
                    .add(ToolBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 34, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                    .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                    .add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 159, Short.MAX_VALUE))
            org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
            getContentPane().setLayout(layout);
            layout.setHorizontalGroup(
                layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                    .addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                    .add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                    .addContainerGap())
            layout.setVerticalGroup(
                layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                    .addContainerGap(29, Short.MAX_VALUE)
                    .add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                    .addContainerGap())
            pack();
        private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
    // TODO add your handling code here:
            System.out.println(h.toString());
    public void updateNamesTable (int id, String na){
         Integer i2 = new Integer(id);
         Object o2 = (Object)i2;
         if (h.containsKey(o2)){
            Name a = (Name)h.get(o2);
            a.name = na;
            h.put(o2,a);
         else {
             Name aa = new Name();
             aa.name=na;
             h.put(o2,(Object)aa);
        private void EDITActionPerformed(java.awt.event.ActionEvent evt) {
    // TODO add your handling code here:
            String name = Table.getValueAt(Table.getSelectedRow(),0).toString();
            int rowNum= Table.getSelectedRow();
            Integer i = new Integer(rowNum);
            Object o = (Object)i;
            updateNamesTable (rowNum, name);
            //public NameEditor(Name n,  Hashtable h, int id)
            NameEditor re = new NameEditor((Name)h.get(o), h, rowNum );
            re.setVisible(true);
        private void REMOVEActionPerformed(java.awt.event.ActionEvent evt) {
    // TODO add your handling code here:
            mJT.deleteRow(Table.getSelectedRow(), rows, Table);
        private void ADDActionPerformed(java.awt.event.ActionEvent evt) {
    // TODO add your handling code here:
            mJT.addRow(rows, Table);
         * @param args the command line arguments
        public static void main(String args[]) {
            java.awt.EventQueue.invokeLater(new Runnable() {
                public void run() {
                    new NamesGUI().setVisible(true);
        // Variables declaration - do not modify
        javax.swing.JButton ADD;
        javax.swing.JButton EDIT;
        javax.swing.JPanel Panel;
        javax.swing.JButton REMOVE;
        javax.swing.JScrollPane TScrollPane;
        javax.swing.JTable Table;
        javax.swing.JToolBar ToolBar;
        javax.swing.JButton jButton1;
        // End of variables declaration
    public class NameEditor extends javax.swing.JFrame {
        Hashtable h;
        Name n;
        int id;
        /** Creates new form NameEditor */
        public NameEditor() {
            initComponents();
        public NameEditor(Name n,  Hashtable h, int id) {
            this.h=h;
            this.n=n;
            this.id=id;
            initComponents();
            NameField.setText(n.name);
            jTextField2.setText(n.weight);
            jTextField1.setText(n.height);
            setDefaultCloseOperation(javax.swing.WindowConstants.DISPOSE_ON_CLOSE);
        /** This method is called from within the constructor to
         * initialize the form.
         * WARNING: Do NOT modify this code. The content of this method is
         * always regenerated by the Form Editor.
        private void initComponents() {
            NameLabel = new javax.swing.JLabel();
            NameField = new javax.swing.JTextField();
            SaveBut = new javax.swing.JButton();
            jLabel3 = new javax.swing.JLabel();
            jLabel4 = new javax.swing.JLabel();
            jTextField1 = new javax.swing.JTextField();
            jTextField2 = new javax.swing.JTextField();
            setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
            setTitle("Name Editor");
            getAccessibleContext().setAccessibleName("Name Editor");
            NameLabel.setText("Name: ");
            NameField.setEditable(false);
            NameField.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    NameFieldActionPerformed(evt);
            SaveBut.setText("SAVE");
            SaveBut.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    SaveButActionPerformed(evt);
            jLabel3.setText("Height");
            jLabel4.setText("Weight");
            org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
            getContentPane().setLayout(layout);
            layout.setHorizontalGroup(
                layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                .add(layout.createSequentialGroup()
                    .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
                        .add(layout.createSequentialGroup()
                            .addContainerGap()
                            .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                                .add(layout.createSequentialGroup()
                                    .add(jLabel4)
                                    .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED))
                                .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                                    .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                                        .add(jLabel3)
                                        .add(NameLabel))
                                    .add(16, 16, 16)))
                            .add(17, 17, 17)
                            .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                                .add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 138, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING, false)
                                    .add(org.jdesktop.layout.GroupLayout.LEADING, jTextField2)
                                    .add(org.jdesktop.layout.GroupLayout.LEADING, jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 46, Short.MAX_VALUE))))
                        .add(org.jdesktop.layout.GroupLayout.LEADING, layout.createSequentialGroup()
                            .add(127, 127, 127)
                            .add(SaveBut)))
                    .addContainerGap())
            layout.setVerticalGroup(
                layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                .add(layout.createSequentialGroup()
                    .addContainerGap()
                    .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                        .add(NameLabel)
                        .add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                    .add(30, 30, 30)
                    .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                        .add(jLabel3)
                        .add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                    .add(12, 12, 12)
                    .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                        .add(jLabel4)
                        .add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                    .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 27, Short.MAX_VALUE)
                    .add(SaveBut)
                    .addContainerGap())
            pack();
        public void updateNameTable (){
         Integer i2 = new Integer(id);
         Object o2 = (Object)i2;
         h.put(o2,n);       
        private void SaveButActionPerformed(java.awt.event.ActionEvent evt) {                                       
    // TODO add your handling code here:
            n.height= jTextField1.getText();
            n.weight = jTextField2.getText();
        private void NameFieldActionPerformed(java.awt.event.ActionEvent evt) {
    // TODO add your handling code here:
         * @param args the command line arguments
        public static void main(String args[]) {
            java.awt.EventQueue.invokeLater(new Runnable() {
                public void run() {
                    new NameEditor().setVisible(true);
        // Variables declaration - do not modify
        javax.swing.JTextField NameField;
        javax.swing.JLabel NameLabel;
        javax.swing.JButton SaveBut;
        javax.swing.JLabel jLabel3;
        javax.swing.JLabel jLabel4;
        javax.swing.JTextField jTextField1;
        javax.swing.JTextField jTextField2;
        // End of variables declaration
    }

  • Recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step

    recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step instructions xoxoxo
    And my iTunes sign in is also screwed up... It is underneath my friends email (the one with my backed up data on his Mac laptop) HOW DO I CHANGE THIS SO THAT I CAN DOWNLOAD APP's again...

    I suspect unless he had some items in iCloud backup then they are gone.  Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

  • I have an iPhone 4s. Suddnely for past two days, the contact names from my address book are disappeared.  Has anyone came across this issue earlier and know the solution please?

    I have an iPhone 4s. Suddnely for past two days, The contact names from my address book are disappeared.  Has anyone came across this issue earlier and know the solution please?

    You had to have some kudos for the effort put in to your thread as week as the point you make.

  • HT4859 If I got a new iPhone and backed up the data from the old one, it should show up once the new one is set up right? Does an "incomplete" status mean it did not back up and can not be restored to the new iPhone?

    If I got a new iPhone and backed up the date from the old one, it should show up once the new one is set up right?
    And does an "incomplete" status on iCloud mean it can't be restored to the new iPhone?
    Help please

    What I mean is still track my stolen one. I don't know if this will make sense to you but I'm thinking that if I restore the back up data on this phone..on my stolen phone it will like forget the icloud account or something and think this phone is the stolen one so when I go to track the stolen one, it will show that phone as the one I have now because I restored the back up from that phone.

  • How i cen get back deleted data from the bin?

    how i cen get back deleted data from the bin?

    Not once you have put the data in the trash and pressed the button to delete it.
    There may be some hope if you can understand what I am telling you in my first post to you.
    Time machine is too complex to explain in this kind of post but I am giving you five links below which should explain quite a lot.   There are no formal instruction manuals for Time Machine.
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files           This in particular
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine

  • My HD burned up and lost all the iphone back. What do I have to keep my data from the iphone?

    My HD burned up and lost all the iphone back. What do I have to keep my data from the iphone?

    What am I doing wrong?
    The real question is what are you doing at all?  This is one of the most basic iPhone functions.  Read Chapter 4 of the iPhone User Guide.  While you're at it, scan the rest of it.
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

  • How to restore my data from the blackberry protect back up archive

    Hi, my phone recently crashed, so I reloaded my OS & tried restoring my data from the blackberry protect app but noticed I could only restore from my last backup. I'd like to restore from another backup point in my archive & not my last. How do I go about it?

    Only backups which are displayed can be restored to your phone. If you don't see any older ones, something might have gone wrong with the backups being loaded to the site. Perhaps you have an older backup done with BlackBerry Desktop Software which you could reload?
    Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

    I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
    Attachments:
    try2.txt ‏2 KB
    read_array.vi ‏21 KB

    The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
    Here are some of your choices to fix your problem.
    1. Change the source file to a tab delimited file. Your VI will then run as is.
    2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
    3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
    Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
    Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

  • Issue in Data from DSO to DSO Target with different Key

    Hello All,
    I am having Issue in Data from DSO to DSO Target with different Key
    Source DSO has Employee + Wage + Post numner as key and Target has Employee + Wage Type as key.
    DSO semantic grouping works like Group By clause in sql, is my understanding right ?
    Also if someone can explain this with a small example, it would be great.
    Many Thanks
    Krishna

    Dear, as explained earlier your issue has nothing to do with semantic grouping .
    Semantic grouping is only usefull when you have written a routine in the transformation for calculations and in error handling .
    Please go through this blog which explains very clearly the use of semantic grouping .
    http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2013/06/16/semantic-groups-in-dtp
    Now coming to your above question
    DSO 1
    Employee WageTyp Amount
    100          aa          200
    200          aa          200
    100          bb          400
    100          cc          300
    If we have semantic group as Employee .   If we have Employee as key of the target DSO and update type as summation .
    then target DSO will have
    Emp                Amount
    100                 700
    200                 200
    In this case Wage type will be the last record arriving from the data package . If the record 100  cc  300 is arrivng last then wage type will be cc .
    2) Case 2
    DSO 1
    Employee WageTyp Amount
    100          aa          200
    200          aa          200
    100          bb          400
    100          aa          300
    if we do Semantic grouping with Emp and Wage Type   If we have Employee and wage type as key of the target DSO and update type as summation .
    then target DSO will have
    Emp     Wage      Amount
    100          aa          500
    200          aa          200
    100          bb          400
    Hope this helps .

  • I have a Macbook Pro Early 2011 from the USA.  After installing Mavericks, Adobe CS6 crashes whenever it is plugged into a 27inch cinema display I purchased from the apple store in China (We moved to China). It works when not plugged into 27inch display.

    I have a Macbook Pro Early 2011 from the USA. It is now running Mavericks.  I connect it to a 27" Cinema Display that I bought in China after we moved to China.  Before I installed Mavericks, I could run all of the Adobe CS6 and Adobe CS5.5 applications on my Macbook Pro while connected to the cinema display. Now that I have Mavericks installed, whenever I am connected to my 27" CInema display my Adobe applications crash upon opening.  I know this is a rare scenario, but does anyone have any ideas how to fix this problem? Is there a new driver that needs installed?  I'd appreciate any help.

    I am also having a similar issue. I used Adobe Lightroom and my whole display goes black. Even my laptop screen and the lights on the keyboard go black. I can still hear the fan running, so I assume it is just the display. This is my first Mac and I have had nothing but issues. I think I am going back to Windows after this.

Maybe you are looking for