Back dating to Logic 7.0 to open OLD Logic 4.8 movie score on an Intel Mac?

Hi guys
I've recently purchased a copy of Logic 7.1 off ebay in order to open and re-mix some old movie scores I produced using Logic 4.8 in the late 90's on a PowerMac 9600. The copy I bought came with the original L7 Dongle. However, I now realise that I can't run Logic 7 on my MacBook or MacPro as Logic didn't work with Intel Macs until 7.2.
The Apple Software Update site only updates to 7.1 ...... and there is no access to a Logic 7.2 from there (just 7.2.1 which says "please upgrade to 7.2 first")
Does anyone have any experince of Logic 7? I skipped versions and went to 8 from 4.8 using TDM in the intervening years!
Many thanks for any solution
ttfn DTF

Leonard Johnson1 wrote:
I have the latest Macbook Pro and I am still able to run Logic 6.0.
But that's an emulated mode running under Rosetta.
It will fall over at the slightest sign of stress.
pancenter-

Similar Messages

Logic Crashes when I open old songs

So I've been doing all my productions on a Mac G5 using Logic Express 7.1. I just bought a Mac Book Pro and updated to Logic Express 7.2.3. All the songs I did on the other Mac won't open.. Logic immediately crashes as soon as I try to launch...

Logic crashes when I open a particular file...
As the old joke goes...
"Well, don't open it then..."
The first things to do is make some backups of what you have, just in case. Then try booting Logic without the audio drivers (or turn them off) and see if you can load the song.
Also, try deactivating your third-party plugs (a snap with AUManager, or move them temporarily out of your components folder), and seeing whether it will load then.
I would guess that the song is corrupted, so once you can get it to load, I would suggest you start copying all the necessary stuff (regions, automation, channel settings etc etc) into a new, uncorrupted song.
Also, you can try and go back through your auto-numbered backup files, assuming you have the function turned on - you might be able to open a version of the song before the corruption. And if you didn't have that autobackup feature turned on - well, I suggest you do from now on!
If you get no joy doing all that, post back and we'll go from there.

Trying to open old logic files.

I have Logic Pro 9.1.6. It works fine. I am trying to open old files and understand I need to save them in Logic 7 first. I have L7 installed on a separate disk with OS10.4.11. When I startup with that disk I can't launch Logic 7 because it does not recognize the usbKey. Any help?
Thanks
Peter Scholes

I just downloaded and ran the XSkeyUpdater which successfully fixed the XsKey so I can now launch Logic 7.
Peter Scholes

Can't open old logic files

I recently upgraded to SNow leopard.
I have logic pro 9
I tried opening older tracks and they won't open due to the version
I made those on logic express 7.
Some of those tracks used intakt and battery 2 which now don't work on 10.6 but did on 10.5
Logic express now wont open and crashes every time i try.
Is there a way of getting around this

Process: Logic Express [271]
Path: /Applications/Logic Express 7.app/Contents/MacOS/Logic Express
Identifier: com.apple.logic.express
Version: 7.0.1 (7.0.1(840))
Build Info: LogicExpressUpdate-1000000~5
Code Type: PPC (Translated)
Parent Process: launchd [143]
Date/Time: 2010-07-09 13:21:37.856 +0100
OS Version: Mac OS X 10.6.4 (10F569)
Report Version: 6
Interval Since Last Report: 113860 sec
Crashes Since Last Report: 14
Per-App Crashes Since Last Report: 9
Anonymous UUID: 43E2F102-CEC7-47C2-ADA8-3BD31B1E72F4
Exception Type: EXC_CRASH (SIGTRAP)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x802362b2 _pthreadkill + 10
1 libSystem.B.dylib 0x80235b5f pthread_kill + 95
2 com.apple.logic.express 0xb80bfb30 0xb8000000 + 785200
3 com.apple.logic.express 0xb80c0037 0xb8000000 + 786487
4 com.apple.logic.express 0xb80dd8e8 0xb8000000 + 907496
5 com.apple.logic.express 0xb8145397 spinlockwrapper + 1791
6 com.apple.logic.express 0xb801ceb7 0xb8000000 + 118455
Thread 1:
0 libSystem.B.dylib 0x801400fa machmsgtrap + 10
1 libSystem.B.dylib 0x80140867 mach_msg + 68
2 com.apple.logic.express 0xb819440f CallPPCFunctionAtAddressInt + 206231
3 libSystem.B.dylib 0x8016d81d pthreadstart + 345
4 libSystem.B.dylib 0x8016d6a2 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x802f8500 ecx: 0xb7fff9ac edx: 0x802362b2
edi: 0xb8211640 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
ss: 0x0000001f efl: 0x00000286 eip: 0x802362b2 cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x802362a8
Binary Images:
0x80000000 - 0x8005bff7 com.apple.framework.IOKit 2.0 (???) <A013B850-6ECB-594A-CBD6-DB156B11871B> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x8007a000 - 0x800e4fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
0x8013f000 - 0x802e5feb libSystem.B.dylib 125.2.0 (compatibility 1.0.0) <3441F338-2218-6D36-3F95-3A16FBF6713D> /usr/lib/libSystem.B.dylib
0x80366000 - 0x804e0fe3 com.apple.CoreFoundation 6.6.3 (550.29) <00373783-3744-F47D-2191-BEEA658F0C3D> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x805d8000 - 0x805e6fe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <3CE8AA79-F077-F1B0-A039-9103A4A02E92> /usr/lib/libz.1.dylib
0x805eb000 - 0x805f7ff7 libkxld.dylib ??? (???) <322A4B52-8305-3081-6B74-813C3A87A56D> /usr/lib/system/libkxld.dylib
0x805fb000 - 0x80641ff7 libauto.dylib ??? (???) <85670A64-3B67-8162-D441-D8E0BE15CA94> /usr/lib/libauto.dylib
0x8064e000 - 0x807d0fe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <2314BD12-0821-75BB-F3BC-98D324CFD30A> /usr/lib/libicucore.A.dylib
0x80832000 - 0x808dffe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <DF8E4CFA-3719-3415-0BF1-E8C5E561C3B1> /usr/lib/libobjc.A.dylib
0x808f3000 - 0x808f6fe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
0xb8000000 - 0xb81defff com.apple.logic.express 7.0.1 (7.0.1(840)) <6437A74D-607F-7339-5F7E-F6B0EF81C25D> /Applications/Logic Express 7.app/Contents/MacOS/Logic Express
0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <3441F338-2218-6D36-3F95-3A16FBF6713D> /usr/lib/libSystem.B.dylib
Translated Code Information:
objc[271]: garbage collection is ON
NO CRASH REPORT
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.3f8, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: pci1095,3132, sppci_raid, Slot-3
PCI Card: ATI Radeon HD 2600, Display, Slot-1
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-2
PCI Card: pci1033,e7, sppci_ieee1394openhci, Slot-2@2,1,0
PCI Card: pci1033,e0, USB Enhanced Host Controller, Slot-2@2,0,1
PCI Card: pci1033,35, sppci_usbopenhost, Slot-2@2,0,0
Serial ATA Device: ST3320820AS_P, 298.09 GB
Serial ATA Device: Hitachi HDS721010CLA332, 931.51 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Hub, 0x05ac (Apple Inc.), 0x911c, 0xfd500000
USB Device: Photosmart C4200 series, 0x03f0 (Hewlett Packard), 0x5c11, 0xfd510000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd530000
USB Device: nanoKEY, 0x0944, 0x010d, 0xfd531000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd533000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd532000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x921c, 0xfd520000
USB Device: Express 128, 0x07fd, 0x0001, 0x3d200000
USB Device: Express 128, 0x07fd, 0x0001, 0x3d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000
USB Device: iLok, 0x088e, 0x5036, 0x00300000
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: Ensemble, Apogee Electronics, Up to 400 Mb/sec
FireWire Device: unknown_device, Unknown

Unable to open old Logic Files???

Are you not able to open older Logic 7 files in Logic Studio now? I tried to open one of my files and my computer crashed. The file is not corrupt I might add. This is crazy. This happened with another file of mine. How do you open these? Can you? If not, thats not good at all. Please help.

Although your song file may not be corrupt, it may be referencing plug-ins or instruments which are not compatible with Logic 8 and/or Leopard which you also seem to have installed.
Can you open these songs still in LP7? If so maybe you could export all tracks as audio files and import and continue in L8, or check the plug-ins and instruments used in your older projects to make sure you don't need updates.
You might also see if there are any crash logs (Utilities -> Console). If so, they might give you a clue as to what might be causing your crashes.
Personally, I've found that on more complex projects, completing first them in LP7 and only going to L8 for new projects has worked best for me.

Logic Pro won't open a Logic arrangement created in Logic Pro Educational

Anyone experiencing this unusual problem. I am running a fully registered copy of Logic Pro on my MacBookPro. My client is using Logic Pro Educational copy, which expires in a few weeks from now. I have tried to open his arrangement/song files on my system. My Logic Pro won't even recognise what kind of file it is. Anyone know why this is happening? Very, very annoying when this is my line of work and income. If it's a security issue, then it should be the other way around. He shouldn't be able to open my files, hence me paying £700 for my licience. Any advice from anyone would be most helpful. I know someone will probably say...'well get your client to buy a full copy of Logic Pro' ... But it still won't solve this problem in accessing this work. Sometimes Apple...arghhhh!

Thanks for your response. We actually tried it with another user who uses an educational copy. It worked straight away without any problems on his system. 'Corrupt file' is the error I'm getting though, so you're right there. The only thing I can think of is I'm using a MacBookPro and they are using the older Macs. Could it be a strange Intel problem? Very weird. Would love to get to the bottom of this. I am going to try loading it up on my friend's G5 to see if this is the case.
Thanks.
Nick.

Question i backed up my iphone how do I open old texts and other info

Question I backed up my iphone on itunes. I see that it was backed up then restored it. How do I get the info i backed up?

Read http://support.apple.com/kb/HT4946 and follow the location given in Where Are iTunes Backup for your computer system and see if there are any older files of backups in there.

Logic on intel mac ?

Hello
now that we know there will be Intel Macs on sale in less than a year i was wondering if an intel version of Logic was in the work.
I would immediatly buy an intel powerbook, but not if Logic isn't released at the same time.
Adobe said Photoshop for intel mac would be released in the end of 2006/ beginning of 2007 . what about Logic ?
thanks

Anything posted at this time would be considered rumour or speculation as there are no formal announcements from Apple. Remember that Apple said that there will be Intel based units.
jord

Back Dated AR Aging Detail - How to see Documents with Open Balances Only?

Dear All,
Our customer is trying to submit a back dated AR Aging Detail report to their bank. When they run the report as of 09/30/08, the detailed aging report is 28 pages long and has all the partial payment details which the bank does not need; rendering the report useless.
We would like to find out if there is a way to run a back dated AR Aging Detail report and only see Document Number, Date and Open Balance.

Hi,
Please check Note No. [800294|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=800294] which describes about settings required to run the backdated aging report in 2005 version.
If you are working with 2007 version, then you need to check the tickbox "Display customer with zero balance" and run the backdated aging report to get the correct results with the open figure (which will match with the AR receivables Account balance as at that date).
However, if your 2007 version is below patch level 38, you can refer to Note No. [1178854|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1178854] which can be of help in that case.
Hope the information was helpful.
Regards,
Jitin
SAP Business One Forum Team

Back dated period opening

Dear All,
I want to open the back dated period of sep. 2010 for mm posting and currently my dec. 2010 and jan. 2011 is open. we tried to open the back dated period by closing dec. 2010 and jan.2011 but we failed kindly guide me how to open it so that we can do the transaction.
Thanks & Regards,
Rahul Kharat
Edited by: Rahul_13 on Apr 2, 2011 9:27 AM

Hi Rahul Kharat,
I am sorry to tell you that this is impossible. There's trs MMPI to open a certain period, but it should never be used in the production environment. Check e.g. the note [487381|https://service.sap.com/sap/support/notes/487381].
BR
Raf
Just saw now a wonderful answer by Fabio Almeida to a similar question in the thread How to open already closed period in MM!
BR
Raf
Edited by: Rafael Zaragatzky on Apr 2, 2011 10:47 PM

HT5794 How do I get .lso-files, made back in the day, to open in Logic Pro

My old Logic Express 8 won't open them, I need Logic Pro 7.2.1 it tells me, . It's like that program never caught on in my network, nobody has it. All help greatly appreciated, a DMG-file , on DVD.....or maybe even you converting them for me on your trusty old machine after I've sent them to you ..... Anyone?
Please contact : [email protected]

Logic X will open them, but it won't be compatible with Logic 8.
Try looking for a copy of Logic 7 trial. You may have to go to dodgy places find it, but being a trial version I don't believe it's illegal to download from non Apple sources.
There was a Logic Express 7 trial version at one point I believe.

Back dated Evaluated Receipt Settlement.

Hi Experts,
I am trying to post invoices by Evaluated Receipt Settlement.
I have made all the necessary settings for Evaluated Receipt Settlement and they are giving as desired.
But when I am trying posting invoices of last month (last month is open for posting) the date is picked by the system is todays date
can anybody suggest that how Evaluated Receipt Settlement will pick up the GR date for invoice date and posting date. so i will be able to post back dated invoices as per GR date through Evaluated Receipt Settlement (MRRL).
regards,
Vimlesh

Hi
Using Standard Configuration you may not be able to fulfil your requiremnt.
Please use the Business Add In - MRM_ERS_HDAT_MODIFY
You can use it to change various document header data in vendor invoices in the automatic settlement of planned delivery costs (ERS).
The following data is made available to the Business Add-In:
I_RBKPV (Document header)
TI_ERS_DC (Delivery costs to be settled)
The Business Add-In returns the following data:
E_RBKPV_IS_CHANGE (Document header fields that can be changed)
E_CHANGE (Must be set to 'X' for the changes to be adopted)
you will need an ABAPEr to Implement a BADi.
This BAdi is invoked when you call the Trnasaction MRRL.
Your logic of determining the Posting date & the Document date needs to be logically added to the new implmentation of the BADi.
Business add In's are used similar to user exits or enhancements.
Please get in touch with your ABAPEr.
Thanks & Regards
Kishore

How to Block Viewing Back Dated Data

Dear All,
Please help in the following scenario :
Requirement : To Block Viewing of Back Dated Data.
For Eg : from 2012-2013 we have had data, but management wanted from 2014 April 1st
on wards viewing of data for 2012-2013 year should be blocked except for management
and not for employees or middle level guys.
Suppose if we open FBL3N, this tcode should only allow viewing of 2014 April 1st onward data
and not back dated. I mean to say not only for tcode FBL3N but across all tcodes.
I was thinking of validation @ company code level and date range, but not getting how to proceed.
Abstract Logic :
if company code = '1000' and Date <= '31-3-2013' , do not display data for any tcode and throw error msg "your are not authorized to view data"
Your help will be highly appreciated.
Thank you,
Regards,
Mahesh

Hi,
You can do following :
1. Go to transaction code FBL1N
Enter Company code
Enter Date you want to restrict
2. Click on Save
3. Next Screen
Select Protect field option for posting date
4. Click n Save
5. FBL1N Screen
h
You can see that Posting date has became non editable.
6. Use function module RS_ABAPVARIANT_AUTH. and pass Variant name and User ID.
We hope your problem will get resolved by this methodology.
Regards,
Tejas

Opening older Logic Sessions in Logic 8

With the constant stream of upgrades we seem to all have to pay for these days, I'm probably not the only one who has old logic sessions dating back to version 4, if not earlier!! So tell me this.... why the bloody **** do Apple want to make life so difficult!! I have to revisit an old mix down and I can't open it in Logic 8. Not only that but it tells to open it in Logic 7 (which I still have the install disks). v.7 is no longer on my MAC as I had to do a clean install thanks to some amazing firewire problems! But now I can't install v.7 on my MAC without installing over v.8!!!!!!!!!! Does anyone know how i can solve this inconvenience??
R

I've had the same problem.
It drives me batty why Logic 7 would have the ability to load older projects, but Logic 8 doesn't.
What possible reason would there be for removing this basic functionality from the program?
All previous versions of Logic have used a "converting song into ver. xx format" warning for situations like this. But I can't remember any previous version of Logic that was simply unable to load older projects. Shameful. And most un "pro".

Bug: Logic 8 Can't open ANY of my pre L7 files

I know this has been discussed before. For some people, opening pre-L7 files in Logic8 works fine. For others, it's a problem.
But today I realized just how wide spread this situation is. Logic 8 will not open ANY of my pre L7 songs. NOT ONE.
That's literally hundreds of songs and projects on my hard drive that I will have to load into L7 one at a time to 'translate' so that L8 can read them. I call this a BUG because it's directly the opposite of what the manual claims Logic 8 can do:
"Opening Pre Version 8 Songs
You can open Logic Pro 5, Logic Pro 6, and Logic Pro 7 songs in Logic Pro 8. When
loading a song or project created in a pre-version 8 Logic variant, the format will be converted to the version 8 format. A Save As dialog will open, allowing you to save the project with a new name. The original version song will be retained."
I'm only posting this in the hopes that all of you experiencing problems with older projects will please LEAVE FEEDBACK on this topic with Apple. I don't want to lose access to years worth of archived work, and there's no good reason why L8 should lose the file import ability it had in L7. I do have L7 on an older machine, so I can laboriously translate the files 1 at a time if I have to. But keeping L7 and L8 installed on the same machine is problematic. And it's crazy to have to do this at all, since it's a basic functionality L8 should have if Apple would only get around to fixing it.
So please let Apple know if this matters to you. (Unless it doesn't and I'm the only one affected... just my luck).
The weird thing is that the "Can't Open" dialog that comes up on my system specifies that the files can only be opened by "Logic 7.2.1 or earlier". Wonder what was so special about 7.2.1???
?

fermusic wrote:
have you tried to use *Import song* instead Open?
Have you troed to use rosetta version???
there is bug but it is related only with Intel Macs
G
Yup, and yup. I can run Logic 7 on my mac fine. And Logic 7 can import and play all my L5, 6, and of course 7 projects without a problem.
But Logic 8 CAN'T.
That's the problem. We're talking about literally hundreds of projects, and NOT ONE of them loads properly in Logic 8. Not a single one.
Clearly something in my default template makes Logic 8 unhappy. Don't know if it's the number of busses I use (16) or the effects routing or... who knows? What I do know is that a) Logic 8 should be able to open legacy files if it is to deserve the name "Pro", and b) I definitely do not have the time to open several hundred files one at a time in L7 and resave them.
And, even if I did resave all my version 5 and 6 projects in L7, the reality is they would still load improperly in L8 because of the revised bus/aux routing. When I open any of my L7 projects (which always ran just fine in L7), Logic 8's environment page gets completely messed up. The scroll bars stop working, making it impossible to see the channel you're working on.
Yes, I've emailed Apple's black-hole-o-customer-support. The silence has been deafening in response. If I weren't so lazy and cheap I'd be on Pro Tools I guess... But I know Logic like the back of my hand and I have work to do. Problem is, I'm starting to hate Logic like the back of someone else's hand which keeps slapping me in the face.
Ho and Hum.

Back dating to Logic 7.0 to open OLD Logic 4.8 movie score on an Intel Mac?

Similar Messages

Maybe you are looking for