Back flush to ECC after every operation required..... Is it possible?

Hi,
I am having 10 operations in my Routing , need to consume inventory at operation 2, 4 and 9 (say), My Problem is that can I see the ECC inventory back flush after every operation?
Component A Inventory is 10 at ECC and SAP ME too it is 10
Example - In operation 2 I consumed one then SAP ME Inventory should be 9 and same time ECC inventory also should be 9 at the same time.
Back flush after work order/SFC is complete is ok but I need Back flush after every operation that is what is required? Is it possible?
Regards
Suhas

Hi Jay
I would think you could accomplish this by configuring some variables. You would need one variable to store a total of the others. You would configure the other variables to store a zero initially, then a one when clicked. The buttons would trigger an advanced action that would set the variable to one, then check the tally. Perhaps reveal a hidden button after all buttons had been clicked. The buttons would simply jump to different slides. You wouldn't insert buttons on the slides so the user would be forced to view them in full.
I have somewhat of an example up at the link below.
Click here to view
My example forces the user to view four slidelets in any order before allowing the next slide to be reached.
Hopefully this will help you in some way... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

emilypdunne wrote:
Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?
Is what you're saying that you only want backups in TM of the state of your Mac from January 2015 to the current date and nothing before then? I'd think the simplest solution would just be to delete in TM all the backups prior to 1/15 and then let TM do its thing. The ultimate source for all things Time Machine is here. On this page, note the comment that "Time Machine will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup" which I understand to mean that if you delete all the backups in the TM file prior to 1/15, any file that wasn't present on your Mac as of 1/15 will no longer be represented in the TM file. Note that the second link also has instructions for how to delete TM files.
If you were trying to accomplish something else, then as Emily Litella (Gilda Radner in SNL) used to say, "never mind."

'RSTS_READ' after upgrade error Required conversion not possible (ZFORM16)

Hi,
We have recently upgraded from SAP 4.7 to SAP ECC 6.0.
For client requirements, they have developed ZFORM16 in 2006 by copying the standard form HINCF160.
But after upgradation, when we execute ZFORM16 for 2006 data we are getting the error message:
                         Required conversion not possible
Some analysis of the issue is:
1)     In include: ZPCF16IN3 at statement:    PERFORM read_temse.         " MDSNT927906
2)     It is going to include : ZPCF16IN8 we are getting the error message at the statement :
call function 'RSTS_READ'
The error message is: Required conversion not possible
When I have checked the standard of form 16 HINCF160 code in ECC 6.0 is as:
In include PCF16IN3, PERFORM read_temse. Statement is commented and the corresponding form in PCF16IN8 include is also commented (Form read_temse) and now SAP is using different logic to get the DETAILS OF TAX DEDUCTED.
If I try to comment the PERFORM read_temse in ZPCF16IN3 then I am able to get the Form16 but DETAILS OF TAX DEDUCTED are not displayed. DETAILS OF TAX DEDUCTED logic is in PERFORM read_temse in ZPCF16IN3.
Can someone help me in solving the issue?
Regards,
Prem

We had to restart SAP & Oracle and the issue is solved

Change of materials after every operation

Dear MM Experts,
if u want to make a project ( like big vessal), then first we take a raw mateiral like a Steel Plate ( size 10x20 mm). after first process cutting, then the same plate will changes 10x18 mm, then what we have to do? can we create a new material code ro what. Y becoz here for a single material we have contunous operation like this, when ever the the material shapes changes can we create new material code or what?
thanqu
raj

You can of course define a material for each shape during the process.
I usually create only material masters for the shape sizes that will be stored (even only for a few days until they will be used for the next process step)
But with variant configuration it is possible to just define one material, and capture the different sizes in batch records.

I'm using Windows XP2. Can't open my "iTunes Store" page. Have to struggle to get to my library. Have uninstalled/reinstalled multiple times. Cleared associate apps in Add/Remove. Re-booted after every operation. No change. Still opens in library.

I'm using a Windows XP (32 Bit). I can't open my "iTunes Store" page. I have to struggle just to open the iTunes icon. When I do, it opens directly to my music library. When I try to click to the iTunes Store, it opens to a blank page with the words "iTunes Store" embossed in gray in the middle of the page. That's it! NO GRAPHICS! I even tired the "Diagnostics" test. It shows that there is a disconnect with the internet and the iTunes Store. When I clicked the "Help" button next to it, it opened to a totally blank page. Nothing. I'm trying to sync an iPad 2 to iTunes on that computer. It shows on the computer that the apps have been synced, but they are not present on the iPad. Just as a note: the apps and info in the account has been loaded on the computer via 3Gs and then a 4S phone. Thank you for any and all help in this matter.

Hi Andre V.,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

Request Summary: Average Response time showing value 0 after every 5 minute

Greeting Experts,
We are facing a strange problem on our portal, we have been assigned with the task of monitoring system performance of portal every one hour. But at the end of every hour, the values it was giving is 0 in the request summary tab(System Administration> Monitoring> Request Summary). After monitoring we found out that the monitoring is resetting after every 5 minutes which means that every 5 minutes the values are showing 0. We need to increase the reset time in request summary so as to evaluate the real performance of the system.
Please advice whether it is a normal case in portal, and whether the threshold can be increased in the portal.
Thanks and Regards,
Sarthak syal

Increase "HungServerRecoverSecs"(default 300 seconds) in your iisproxy.ini.
Jong
"TejoKiran" <[email protected]> wrote:
>
Hi ,
Iam using an Applet (under JRE 1.3.0).
Iam trying to send a Http Request using URL Connection.
It is working fine . However, if the response time of the server is more
than
3 minutes ,
the Response is not coming back to the the Applet and it is in a loop
trying to
read from the Server.
I have observed that the request is sent to the server and it is processed
successfully.
Then , I tried to call this sample JSP from the Applet.
<CODE : delay.jsp>
<%@ page language="java" import="java.util.*"%>
<%
System.out.println("<START>");
out.println((new Date()).toString());
System.out.println((new Date()).toString());
long cTime;
cTime = System.currentTimeMillis();
long dTime = cTime;
while(true) {
long dif = System.currentTimeMillis() - cTime;
if(dif > (15*60*1000))
break;
if((System.currentTimeMillis() - dTime) > (2*60*1000)) {
out.println("2 Minutes");
out.flush();
System.out.println("2 Minutes");
dTime = System.currentTimeMillis();
System.out.println((new Date()).toString());
out.println((new Date()).toString());
System.out.println("<END>");
%>
</CODE>
Because , I was flushing the data after every 2 minutes , it worked fine
This one worked with WebLogic 5.1 when accessing the Weblogic server
directly
. Like
http://IP:7001/ccls/test/applet.jsp (This JSP downloads the Applet under
JRE1.3)

How can i glow a led after every five seconds

dear sir
i am using labview 7.0
i want to glow the led after every five seconds. See let us consider i start my vi at 22feb2007 at time 10:14:10. When my system time reaches to 10:14:15 at same date i want that led should glow for two seconds only. i want to continue with his loop that is led ON and OFF after every five seconds
Is it possible? If yes please help me.
falgandha

Your setup is a bit irregular, because it will be off for 5 seconds, on for two, of for three, on for two, etc.
Heres' one simple possibiility, modify as needed.
Message Edited by altenbach on 02-21-2007 09:32 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
OnOff5Sec.png ‏5 KB

Is there any way that I can get back my iPhoto? After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

Is there any way that I can get back my iPhoto? After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

As Niel pointed out, yes. The disk probably will look like the MBP disk (4) in this screenshot;
OT

Firefox become not responsive after every 10 minutes for few seconds, and it back again.

Firefox 4 become not responding after every few minutes ( mainly 10 minutes). And it came back to its normal state within 10-15 seconds. I reinstall windows and Firefox, but same problem occur. On using chrome 11 and IE 9 I have no problem. I also check that there is no problem on using Firefox 3.
I mainly use Firefox for my web browsing, but due to Firefox 4 I totally disappointed. What should I do for now?

You have an add-on installed called Internet Download Manager. It's on Mozilla's Add-on Blocklist @ https://www.mozilla.com/en-US/blocklist/ at the foot of the page.
Uninstall it by clicking the orange Firefox button, go to Add-ons and then remove it in the Extensions menu.
If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your other add-ons is the culprit.

Avoid Commit after every Insert that requires a SELECT

Hi everybody,
Here is the problem:
I have a table of generator alarms which is populated daily. On daily basis there are approximately 50,000 rows to be inserted in it.
Currently i have one month's data in it ... Approximately 900,000 rows.
here goes the main problem.
before each insert command, whole table is checked if the record does not exist already. Two columns "SiteName" and "OccuranceDate" are checked... this means, these two columns are making a unique record when checked together with an AND operation in WHERE clause.
we have also implemented partition on this table. and it is basically partitioned on the basis of OccuranceDate and each partition has 5 days' data.
say
01-Jun to 06 Jun
07-Jun to 11 Jun
12-Jun to 16 Jun
and so on
26-Jun to 30 Jun
NOW:
we have a commit command within the insertion loop, and the each row is committed once inserted, making approximately 50,000 commits daily.
Question:
Can we commit data after say each 500 inserted rows, but my real question is can we Query the records using SELECT which are Just Inserted but not yet committed ?
a friend told me that, you can query the records which are inserted in the same connection session but not yet committed.
Can any one help ?
Sorry for the long question but it was to make u understand the real issue. :(
Khalid Mehmood Awan
khalidmehmoodawan @ gmail.com
Edited by: user5394434 on Jun 30, 2009 11:28 PM

Don't worry about it - I just said that because the experts over there will help you much better. If you post your code details there they will give suggestions on optimizing it.
Doing a SELECT between every INSERT doesn't seem very natural to me, but it all depends on the details of your code.
Also, not committing on time may cause loss of the uncommitted changes. Depending on how critical the data is and the dependency of the changes, you have to commit after every INSERT, in between, or at the end.
Regards,
K.

After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

Question
After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

Today, two other users reported issues with the back-forward history list dropping down if they hovered the mouse pointer over the back or forward button -- without clicking -- and then moved the pointer downwards. One user was on a touchpad, I don't know about the other user. Are you experiencing anything like that?

Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode".

It only does this on Reading Rainbow DVDs so far: Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode". It does this whether the laptop is plugged in or is using battery power. How do I get it to play all?? Thanks.

Turns out it was NOT the software or the Mac. I bought a portable DVD player and this problem happens with it, too.

Forced second restart required after every s/w upgrade

As the subject title says...
on one of my two G4 Macs, after every/any software update that REQUIRES a restart, the restart never completes on it's own. I can actually hear the HD NOT having any disk activity. It just hangs when the screen goes from grey to blue with the spinning sprocket thingy.
If I hold the power button in until it forces a restart (iBook) it then reboots fine and the second attempt. Why?Why?Why?
This started maybe 2 years ago and never went away. It's just annoying more than anything else.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/

I recently bought an album from itunes on my i pad but then i had to update my i pad so after every thing was done i try to redownload the album and icouldnt so what do i have to do to get that album back

i recently bought an album from itunes on my i pad but then i had to update my i pad so after every thing was done i try to redownload the album and icouldnt so what do i have to do to get that album back

Click here for information.
(33996)

BPEL process on error retrying self after every 5 minutes (no fault policy)

Hi All
We are facing very strange issue in one of our BPEL processes (we are using Oracle SOA Suite 11.1.1.3 on linux with 2 soa servers in cluster). The composite consists of a web service binding followed by a mediator which routes to three different BPEL processes (operational routing). This is all one way.
Inside the BPEL we are throwing a bpel rollback fault in the catch all to roll back any pending database changes. As soon as the error comes, In the composite diagram i can see multiple BPEL instances under the mediator and they keep on coming after every 5 minutes (basically i see two BPEL instances with a gap of one second and this pair keeps on repeating every 5 minutes)
Also we have a send email in the catch all and the email we get has a different composite id in every mail. However in the em i can see only one composite id (the first one when the error came) with multiple BPEL diagrams in it.
We are not sure what is causing the error?
1) Is it the one way mediator routing to 3 BPEL processes as per the operation invoked?
2) Is there something wrong with clustering?
3) Is there a problem with version 11.1.1.3?
Please help as we are struck and not able to move to INT.
Thanks and Regards
Amit Sachdev

Hi Anuj
Thanks for the reply again. Using the below property seems to work, but it is making the call sync (i get an empty fault in SOAP-UI) and my java client also waits for the response.
<component name="abcd">
<implementation.bpel src="abcd.bpel"/>
<property name="bpel.config.oneWayDeliveryPolicy" many="false" type="xs:string">sync</property>
<property name="bpel.config.transaction" many="false" type="xs:string">required</property>
</component>
As i told that this is a long running process (could easily take 3-4 hours), i cant afford to wait for this (should be fire and forget).
1) Is there a way, i can make it fire and forget and also stop the recovery using the properties you just told?
2) If there is no way out, i can remove the throw rollback fault in catch all, but i want the composite instance to be shown as red (i will take care of the rollbacks in db in code). I tried using the terminate activity but that doesn't make it red (like it used to be in 10g). Is there a way to mark the instance as red without throwing an uncaught fault?
Please let me know. Thanks
Also regarding the patch, if we apply it, will it still recover the BPEL instance? I mean the BPEL is throwing a rollback fault and is being exactly retried 50 times with a gap of 5 minutes (default settings in em console, not touched at all). Every time it runs it would throw the same fault again (as it reads and deletes a control file, so in successive runs that control file will not be there) leading to rollback error being thrown from catch all during automatic retry.

Back flush to ECC after every operation required..... Is it possible?

Similar Messages

Maybe you are looking for