Back flush with both Packet and Bucket
Dear all,
We produce consumer goods in our company and we maintain Finish Goods in Packet and Bucket. Can we key in Back flush in both unit Packet and Bucket?
E.g we have Finish Goods A, Qty = 10 Bucket and 23 Packet
(1 Bucket = 40 Packet)
Can we input into Backflush : 10 Bucket + 23 Packet ?
Or we can input by (10*40+23) Packet only?
Pls advise us.
Thank you very much!
CH
CH,
Why do you want to backflush the finished goods.
I think you want to do auto GR for this FG on order.
If that is the case then you can do following things.
You have the base unit of measure as packet.
In the material master of that FG, in the work scheduling view enter order unit as bucket.
As soon as you enter system will give you pop up.
Manintain the relation of both the units there & save.
Henceforth whenever the production order will be created it will pick up the unit as bucket with relation given in packet in the order header.
Put auto GR control key in one of the operation in the order.
So it will suggest the GR with confirmation.
In MMBE you can see the stock with any of the unit.
Hope this helps you.
SmanS
Similar Messages
-
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
MacPro with both Leopard and Tiger drives. Want to switch iTunes How
I am running a MacPro with both Leopard and Tiger drives. I finally want to switch everything to Leopard and its drive. I have iTunes on the leopard drive but have never used it. How can I transfer my iTunes music, iPhone Apps etc. from the Tiger iTunes to the Leopard with the least amount of fuss?
Hello hassiman,
For additional information regarding moving the entire library from the 10.4 partition to the 10.5 partition, see this article:
http://support.apple.com/kb/HT1449
If your iTunes Library is substantial, you may want to consider backing it up to an external location as well:
http://support.apple.com/kb/HT1751
Hope this helps,
Charles H. -
Issues with both iChat and AIM
Recently I have been having issues with both iChat and AIM. I was hoping someone here could shed some light on what the problem may be.
AIM allows me to log-in and chat with people. However, if I close an IM window or Buddy Info window, the AIM program will quit and the "Unexpectedly Quit" notice will pop up.
In regards to iChat, I did a clean install of iChat using the Tiger install disk. However, when I launch iChat and go through the initial setup it freezes up and I get the spinning rainbow and have no choice but to do a force quit.
Any ideas as to what the problem may be?Hi
Seeing you re-installed iChat you will need to run the 10.4.10combo http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10410comboupdat eppc.html to bring iChat back upto date.
Tony -
I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?
Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)
-
Sending emails with both body and attachment to multiple recipients
I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PMThank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients. -
External hard drive use with both Mac and Windows
I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?
Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
(9844) -
Cisco ISE with both internal and External RADIUS Server
Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
BlaiseCisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same. -
In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC? It is not very clear on the home page. It shows both and mentions both, but doesn't specifically say BOTH come with the monthly $9.99/month plan. Can somebody clarify?
Special Photography Plan
http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html -
Form report with both edit and column link
hi experts,
How can we create form report with both edit and column link. Ie, the form should have both the Edit link and column link. When we click on the edit link(in page1) it should go for the page2 and the page2 should display the corresponding row fields which should be editable. but when i click the column link it should bring me to the next page but the corresponding values of the column should not be editable.
Regars,
KKhi,
Here i have achieved this by making the column link and page navigation. -
My Artisan50 works in this configuration currently!
You can't scan to a device connected to the base station's USB port. Devices other than computers with both USB and FireWire ports don't provide any crossover between the technologies unless specifically noted in their description.
(58440) -
i have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?
thank you roger. i have attempted to connect my mbp now 3 times (all different ways with different cables purchased) but unfortunately no success. i understand that with me having an older mbp it can be a challenge. i have found this page http://www.wikihow.com/Connect-a-Macbook-to-a-TV but with my unsuccessful history, i have become skeptical. i will try your suggestion and let you know. thank you again.
-
My PC crashed with both CS6 and Lightroom 4. .
My PC crashed with both CS6 and Lightroom 4. . .I purchased a Mac Pro. Can I download the Mac versions of both programs and use my currenct serial numbers?
You can with Lightroom, but not (as far as I know) with Photoshop. You ought to get in touch with Adobe's customer service people and see if you can "sidegrade" to Mac for a relatively small fee.
Hal -
I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?
Same for me with Iphone 5 and IOS 7 on mac pro. Install ITunes 11.1 and after reboot nothing work. Work only with Mac Pro in safe mode.
I have uninstalled Wi-fi-sync1.0 app from MacPro and Itunes sync well with iphone. -
How do create a slide show with both video and photos in elements 12
how do create a slide show with both video and photos in elements 12
Hi Brian
You can batch process a set of prepared slides from Full Edit (see image) using:
File >> Process Multiple Files
In the PMF dialog you can choose filename, date, or description (caption)
Make sure you choose a separate destination folder to your source folder so as tot to permanently overwrite your originals.
Click image to view
Maybe you are looking for
-
I am trying to restore my phone, but when i go to do it on iTunes, it Updates to 4.3.3 however everytime the 2 and a half hour update finishes, it FAILS. So the update fails, and the restore fails. Its happened 4 ties. Im trying to restore my phone,
-
SYSTEM_NO_TASK_STORAGE error
hi am new in basis. am facing one problem production server .pls help me my server is sap 4.7ee database 9i os is windows 2003. RAM is 4gb swap is 12 max but is using 9.3 gb swap record Mon Jun 11 11:21:41 2007 interval 10 sec. Com charg Com cha
-
Error while loading .sim file with sap tutor 2.2
Dear Gurus, I had recorded a tutorial which is am attempting to edit now. On opening the tutorial through the editor, I get the following message: "The following error occured while opening the file: error loading archive: no valid header or TOC foun
-
OCTROI POSTING DURING STOCK TRANSPORT ORDER
Hi, We have the following scenario. Octroi has to be paid during goods transfer from one plant to other. I'll be having an octroi agent who'll be paying the octroi for on my behalf. and the actroi agent will get this amount reimbursed once in a month
-
Inconsistency between a document field and the prof. segment number
Hi, While processing an invoice in one company code for vendor# XXX with the PO# AAAA line# 10, it is showing below error message while posting. Please advise on the below error or fix the issue to post the invoice in to SAP. The using screen T-code