Back flushing with MFBF and MF42N

Hi,
On backflushing with any of the above transaction, if we see the Material document, on Doc. info tab transaction code is displayed as MFBF.
I wants to trace whether the backflushing is done against the Planned Order.
In matl doc we can see the internal Order no(RM01) but not the planned Order.
How can I trace whether the backflush is happend against the planned Order or not?
Thanks
Suresh

Hi Suresh,
It is nt possible to see whether the backflush hapend against th Planne Order or not in Document.
As the Backfluh happens aginst the PCC.
One thing you can do is, if yo Bakflsh againt the Plnned Order the this Planned will be reduced by the backflush Quantity,
You can see his in MD04.
If you do the Backfluh withut reference to the Plnned order then the Redutio will happen as per FIFO basis i.e, the oldest planed order will be reduced first.
Hope this hlps..
Regards,
Siva

Similar Messages

How to Create User Defined Template in Back Office with Labels and Tags App

Hello,
Can anyone help me in creating a user defined template in Back Office with Labels and Tags Application. I'm currently using version 13.2.?
Kindly help me out asap.
Thanks,
Monica.

Hi Monica
Third party software is available,from AccessVia, that can be used to create and update templates. Sample sample sqt can help you to understand the required inputs (batchID, templateID, departmentID, locale).
Thanks
Himanshu

My ipod touch will not back up with itunes and allow me to update to newest software

I am having trouble getting my ipod touch to back up with itunes and allowing me to update to newest suftware. It has been backing up for over 3 days and the status bar has not moved.

Terminate the backup. Close iTunes and disconnect the iPod. Reboot the iPod. Reset the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
The see:
iOS: Troubleshooting backup issues in iTunes
before trying again.

Back up with rescue and recovery

I made a back up with rescue and recovery of windows vista, I changed to Windows 7 (that is working better), and I can't delete the back up. Is a 30 gb backup, that I can' t read with anything to delete it.
Message Edited by Pedrogaris on 05-23-2009 05:30 PM

Hi North450,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the HDD was not working and is replaced in your J105 Desktop, if you have created the recovery discs before the HDD got crashed. I suggest you to install the OS (Operating System) using the Recovery discs to factory reset as it will create the default recommended partitions required for the computer and I’m sorry to inform you that the SATA drivers are not available in our support website for Windows Xp, but can be download from the Intel. Below is the link to download the driver:
Intel Download Center
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Back flush with both Packet and Bucket

Dear all,
We produce consumer goods in our company and we maintain Finish Goods in Packet and Bucket. Can we key in Back flush in both unit Packet and Bucket?
E.g we have Finish Goods A, Qty = 10 Bucket and 23 Packet
(1 Bucket = 40 Packet)
Can we input into Backflush : 10 Bucket + 23 Packet ?
Or we can input by (10*40+23) Packet only?
Pls advise us.
Thank you very much!
CH

CH,
Why do you want to backflush the finished goods.
I think you want to do auto GR for this FG on order.
If that is the case then you can do following things.
You have the base unit of measure as packet.
In the material master of that FG, in the work scheduling view enter order unit as bucket.
As soon as you enter system will give you pop up.
Manintain the relation of both the units there & save.
Henceforth whenever the production order will be created it will pick up the unit as bucket with relation given in packet in the order header.
Put auto GR control key in one of the operation in the order.
So it will suggest the GR with confirmation.
In MMBE you can see the stock with any of the unit.
Hope this helps you.
SmanS

Backing up with clones and archiving

I am backing up my OSX with a cloning software and a separate archiving software.Not too paranoid,but I want to know if there's any harm in having two separate clones on two separate volumes of a firewire connected hard drive,each being maintained by a different software product.Also,any harm from archiving to volume on hard drive with DataBackUP and also archiving peer-to-peer with CrashPlan.Or is that going to be too much(i.e.will the software programs get in each other's way,if you will).

There should be no conflict between the two volumes, BUT you shouldn't consider that you have TWO clones: if that drive fails you lose them both at the same time. You can only say that you have TWO clones if they are on separate DRIVES.

Backing up with hardrive and iCloud

So, I'm just learning about iCloud. It's a very neat concept and even though I'm a little concerned about using it, I'm willing to take a leap of faith with Apple. Since using it, I've noticed that you can't back up with both your hardrive and iCloud. I don't feel comfortable just using iCloud as a back up. What if someone were to hack into my account? What if the service was down? Has anyone figured out how to backup using both?

There should be no conflict between the two volumes, BUT you shouldn't consider that you have TWO clones: if that drive fails you lose them both at the same time. You can only say that you have TWO clones if they are on separate DRIVES.

Backing up with SuperDuper and CCC question

I just got started with SD and CCC and have tried to use both of them to back up over the network but haven't had any luck.
What I'm trying to do:
-- Open SuperDuper or CCC (not at the same time) on Mac1 then log-on to Mac2 and tell SuperDuper or CCC to back up from Mac2 onto Ext.HD1?
Does this technique work, or do I have to open the SD/CCC on the Mac whose drive I want to backup and copy to the external HD from there?
Also, when SuperDuper requires a DiskImage to backup, do I have to create the disk image in DiskUtility first, or does SD do that in preparation to the backup process?
Thanks for helping me get clear on this. First time using backup software.

The instructions on how to make clones are fairly clear; and if you
stick to one or the other, doing so should be fairly easy. I use CCC
most exclusively, and the Bombich web site has helpful instruction
on how to do most things in the header; menus beneath the icons
are generally adequate.
Over a network, the issue may be in how the drives and computers
are seen; since you can assign an ethernet address to most any
thing networked (especially printers, and computers) so maybe this
could be something to check into; or avoid if that complicates clones.
You can use the native Mac OS X Disk Utility to make back ups and
disk images; and you can restore from a disk image created by D.U.
So, you have three ways to make backups of the system or move it.
I use Carbon Copy Cloner, since it was an early favorite and it works.
You have to make a clone from the one you want to copy/clone; so
you will have the data saved on the other drive. The question is not
one that I'd consider; but I learned how to make clones as a part of
a hardware failure troubleshooting interval, which took me a month
after the authorized Apple tech could not find problems with my iMac
yet I could repeatedly find and reproduce the fault; so I did all I could
and then discussed the matter direct with AppleCare; for a real repair.
So, now I clone both computers full drive contents to an external FW;
and eventually wipe both computer's drives, after saving a new clone.
And while I have them wiped; I have Disk Utility zero-overwrite them.
That way, there is no fragmentation and I reclone the content back.
Maybe you could explain what steps you are having issue with in the
clone or backup process, and to simplify this, use one of the methods.
Good luck & happy computing!

HT201250 I just did my first back up with TM and My Passport for Mac, when done adn went into the box ....options...to try and fidn how to delete trash. Then I went back to see if it was erady to do its next scheduled back up and it says there is an error

I just did my initial back up to hard drive (My Passport for Mac 1TB) with TIme Machine on Snow Leopard. I had wanted to omit trash but couldn't find it. All went great and finished in an hour. Then said would restart at 6pm. I went into options about 20 minutes before (when it was done initially) to try and find how to delete trash from being backed up next time.. THis messed things up and now it doesn't recognize the disk and won't let me manually back up...says error. What do I do?
JD in AZ

For all things Time Machine See Pondini's Excellent information here...
http://pondini.org/OSX/Home.html
Start Here > http://pondini.org/TM/Troubleshooting.html
Also see the FAQs

Sharing Time Machine Back Up with Desktop and MacBook

Hello,
In preparation for my work on the road I back up my desktop using Time Machine on my Time Capsule, wipe my MacBook clean and Migrate my files to the MacBook so I can take everything. In recent years I notice when syncing my devices, that process has improved and the iPhone,iPad recognises the MacBook as basically the same as my desktop and I don't have to wipe and sync the device. Thank you Apple engineers for that improvement.
This year is a bit different. I have done the migration, but am delayed departing. I would like to share my Time Machine back up across the two computers. Sort of a poor mans macbook sync. I would treat the Macbook as disposable and the Desktop as primary. Make changes to the iMac then update the MacBook before I leave.
Can I use my desktop , back it up to Time Machine, then update the macbook as required? I would do this until I leave.
Also I noticed for the first time the MacBook is running a different OS to the iMac. Will this matter to me?
Thanks,
Ken
Desktop is an iMac 24 running MacOS10.6.8, 2.4 GHz C2D
MacBook is an early 2008 running MacOS 10.6.3, 2.4 GHz C2D
Time Capsule 802.11n, 1st Generation, version 7.6.4
iPhone 3GS iOS 6.1.6
iPad 2 , iOS 7.1.2

So, the macbook today, I did get this message from the OS re TimeMachine
"Would you like to reuse the backup "/Volume/....sparsebundle"
The backup was created on a different computer. If you reuse this backup it can no longer be used by the original computer.
I selected Reuse Backup. This is very convenient. I am wondering now.
How do I select back and forth on the computer to reuse the various back ups?
Ken

Cracked screen on ipod touch can't get in to it. did a back up with it and tried to put it on new ipod touch 5 and now it keeps talking and won't let me in or turn off. how can i restore to nothing

Cracked ipod touch screen and it won't let me in or turn off. Tried to back it up and put on new ipod touch 5 and now it's not working and doing the same thing. I tried to restore to orginal but it won't let me any suggestions?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
When the above says to restore via iTunes, restore to factory settings/new iPod, not from backup

Babylon search??? has attached to my firefox and I can't get rid of it. There is a back tab with firefox and a front and dominant one with babylon. Help

i have no clue what babylon search is. it has taken a tab in front of firefox. i am terryfied since I use your browser for sensitive info.

Any search toolbar and changes to search engines can take place by downloading and installing software; usually "free" software from the internet. Babylon can be downloaded and installed by itself or as a "ride-along" when installing/updating some software from the internet. Always look for an opportunity during the installation to un-check boxes that will install "ride-along" items that you do not want. Firefox installation does not include such "ride-along" items.
#Remove Babylon Toolbar (if you have it installed). The most complete removal is to remove it from your system using (Windows) Control Panel > Add or Remove Programs): http://kb.mozillazine.org/Uninstalling_toolbars#Uninstalling_via_Windows_Control_Panel<br />
#*Also see:
#**Babylon site support article --> http://support.babylon.com/index.php?/Knowledgebase/Article/View/177/0/uninstall-babylon-software
#**http://support.mozilla.org/en-US/kb/Uninstalling+add-ons
#**http://support.mozilla.org/en-US/kb/Cannot%20uninstall%20an%20add-on
#**http://kb.mozillazine.org/Uninstalling_toolbars
#Reset your home page (if the Babylon search page is displayed when starting Firefox): http://support.mozilla.org/en-US/kb/How+to+set+the+home+page
#*You can reset to the default by clicking "Restore to default" on Options > General > Startup > Home page. Be sure to set "When Firefox starts" to "Show my home page" on that same panel.
#Reset your Location Bar search engine (if typing a few words in the URL/Location Bar takes you to Babylon search):
#*type '''''about:config''''' in your Location Bar, like typing a web site address, and press the Enter key
#*ignore warning and choose to continue
#*in Filter, type '''''keyword.URL'''''
#*in lower part of screen, if it is '''bold''' and shows "'''user set'''", right-click keyword.URL and choose "Reset"
#*in Filter, type '''''babylon'''''
#*any items in lower part of screen in '''bold''' and showing "'''user set'''", right-click and choose "Reset"
#*close about:config tab
#*See:
#**http://kb.mozillazine.org/About:config
#**http://kb.mozillazine.org/Location_Bar_search#Location_Bar_search_.28external_-_search_engine.29
#**http://kb.mozillazine.org/Keyword.url
#**http://www.techrena.net/computers/address-bar-search-provider-firefox/
#If Babylon is shown in your Search Bar and you want to remove it:
#*https://support.mozilla.org/en-US/kb/Search%20bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

IPhone 4 Cant back up with itunes and apps takes for ever to install ! HELP !

Hi .. after i download apps from store directly in ituens it seems that icant back up anything .. itried everything so far i got to this thati have to restore 5.0.1witch i did
now when i want to install apps IT TAKES FOR EVER to instal for example every one r familar with app called Finde my iPhone on my iPod it takes like 10 sec to install but in my iPhone 4 it takes like 10 Min ...
Please help me i need to know what to do

We're not Apple. Se can not magically make a genius appointment available for you.

Flushing with OLE and dialogs

Hello everybody,
I am working on a program thet exports data and uses OLE-automation. Aditionally, it uses same dialogs (File open and File Save). I get short dumps if I use the methods of CL_GUI_FRONTENED_SERVICES so I use the function modules (GUI_FILE_SAVE_DIALOG and TMP_GUI_FILE_OPEN_DIALOG), but it still seems not to be right.
The short dump I got was when the system called AC_SYSTEM_FLUSH. How should flushing methods or FMs be used between two dialogs or OLE processing?
Thanks in advance
Sebastian Kuhnigk

Check your SAP GUI Patch version.
In my site, the user who use SAP GUI 620 Patch level 40 has the same problem.
The problem occurred when he or she save locally or launch Excel.
The solution is upgrading the SAP GUI Path level more than 40.

Ihave over 7gb of saved text messages that i cant delete, ive deleted all my texts and it still says that. ive read that backing up with icloud and turning off documents and data would eliminate this issue... well how...?

icloud will not allow me to backup my phone because of the 7gb of data its too much for the 5gb free space on icloud and i have the documents and data turned off in the icloud settings so i dont understand whats taking up all the space? the only thing i have on the settings is my photos and thats only 4gb. SOMEONE HELP ME!!!

I have this identical problem. For a while my group texts didnt show up on my ipad. Then one day they did, maybe everyone in the group started using the same os version or something. Ever since my first reply to the group there have been complaints of multiple threads. I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time) Everyone in the group has deleted the thread, we've all toggled imessage on/off etc. There still hasn't been a solution.
Any help would be appreciated.
Thanks

Back flushing with MFBF and MF42N

Similar Messages

Maybe you are looking for