Back Ground HELP

How do i change my background on my laptop?? This is my first Mac and on my old PC you could just right click on photos and select it to you back ground. How do i do that stuff on a make?? Or cant it??
Thanks

Open the Desktop & Screensaver pane of System Preferences and select a desktop picture; alternatively, a picture in Safari can be used as the desktop picture by control-clicking it and choosing that option.
(31874)

Similar Messages

What do i do my ipod is a white screen when i try to turn it on and part of the image of my back ground pops up. I dont know what to do. Please comment if you have something that can help. Its a gen four.

when i try to turn on my gen four ipod, a white screen appears. Parts of my back ground pop up.All this started to happen when i dropped my ipod when i took it out of the case. Please comment if you have something that can help me. thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
If that is an accurate description of the problem, consider this:
Image 1: The original image
Image 2: Edit > Fill with the Blending mode set to Color. White remains white
Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
(I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.)

Back Ground in Menu Help

I have installed a back ground in a menu and would like to know how I can re-size it. Currently the edges are outside the save area and I would like to make it smaller. The background was created in keynote and converted into a jpeg file. I'm running Studio 4...would love some help on this one

You will have to go back to Keynote (or bring it into iPhoto) to resize the background

How to find the back ground job details

Hi All,
   I have a back ground job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
           Please informe me how to check this.
Thanks & Regards,
Muralikrishna

On SM37 screen there is plenty of options are there:
This is what i got from SAP help
Explanation for each selection field:
o   Jobname: Name of the job as an identifier.
o   Username: Name of the user who designed and planned the job.
o   Start date: The start condition of the job, which could be a time
frame or an event that the job is waiting for. Specifying both will
yield jobs whose starting condition is either of the two
conditions.
ABAP program step: Name of an ABAP program that acts as a step in a
job.
Status selection: The current status of the job. By default, the
SCHEDULED option is not marked. To see the scheduled jobs, you must
explicitly check this.
also give the proper values in Job Satus also.

Any restictions on back ground job when submit the session?

Hello friends
below is my code part. problem is when i execute this program in back ground the data is not picking from APQI. but in fore ground it is picking . for this SESSION submission in back ground am i missing any thing here. please suggest me , any restiction is their in back ground? if possible please send a sample code to submit SESSION automatically in background.
    SUBMIT rsbdcsub AND RETURN
                    USER sy-uname
                    WITH mappe    = p_group
                    WITH von      = sy-datum
                    WITH bis      = sy-datum
                    WITH z_verarb = 'X' .
      SELECT userid credate groupid qstate FROM apqi
         INTO TABLE it_apqi
         WHERE userid = sy-uname
         AND   credate = sy-datum
         AND   groupid = p_group
         AND   qstate = 'E'.              "Only look for 'Error' status
   DESCRIBE TABLE it_apqi[] LINES temp.

Codes for Submitting the session through RSBDCSUB (via Job)...
" The function module JOB_OPEN is called to create the job.
    call function 'JOB_OPEN'
         exporting
              delanfrep        = 'X' "Delete job after execution
              jobname        = fv_jobname "Job name
         importing
              jobcount         = fv_jobcount "Internally generated
         exceptions
              cant_create_job = 1
              invalid_job_data = 2
              jobname_missing = 3
              others           = 4.
    if sy-subrc = 0.
      submit rsbdcsub
             with       mappe = v_filec
             with            von = sy-datum      "From
             with            bis = sy-datum      "To
             with     z_verarb = 'X'
             with         fehler = ' '
             with      batchsys = space
             with         logall = ' '
             via job          fv_jobname
                  number       fv_jobcount
             and return.
      call function 'JOB_CLOSE'
           exporting
                jobcount             = fv_jobcount
                jobname              = fv_jobname
                strtimmed            = 'X'
           exceptions
                cant_start_immediate = 1
                invalid_startdate    = 2
                jobname_missing      = 3
                job_close_failed     = 4
                job_nosteps          = 5
                job_notex            = 6
                lock_failed          = 7
                others               = 8.
Hope this helps!
Edited by: Vin on Jun 4, 2009 10:58 AM

Problem in Back Ground Job

Hi Experts,
I want to execute a program in Back ground but my program has selectionscreen.
I don't want to Provide Variant for this screen that's why i am passing these values Thru INITILIZATION event.
But Background is not moving forward. It is waiting for I/p.
Can you please help me on this.
Thanks,
Murali Krishna K

Murali,
For a program to be executed in background you need to create a variant and provide the variant name in the def. of the background job. giving the values at INITIALIZATION will NOT work.
On the second thought, you might have declared your parameters as OBLIGATORY. Take out that and make them optional. Now you schedule this in background without a variant and give the values in the INITILIZATION event.
Regards,
Ravi
Note : Please close the thread of the issue is resolved.
Message was edited by: Ravikumar Allampallam

Scheduling Back Ground job

Hi All,
I need to schedule a daily background job for MB52 transaction and need to save the output of MB52 in a specified directory .
Can any one tell me whether it is possible to save back ground job output in specified directory?
Thanks & Regards
k.Nirmala

Hi Nirmala,
Set up variant at MB52 transaction and use SM37 and Sm36 transaction to schedule job.
Define job at Sm36 and use program - RM07MLBS and use your variant.
schedule job and set up time and date for periodcally.
and it will run and you can see the status at SM37 Transaction .
the background job will create spool and which will contain your output.
if you want to download your output ,then you need to write custom program to get spool information from TSP01 table and use open dataset command to down load specifi directory.
Reward Points if it is helpful
Thanks
Seshu

Set back ground color to a particular cell in table view

hi,
 iam working on a jspDynpage and have a htmlb table view for which i need a way to set back ground color to a particular cell in table view, the color has to be set based on a value..is there a way to do it without using an iterator...well iam using a cellRenderer for the table but cant find a way to set the colors...if anyone does have a way please do reply...regards

You can mention the color in textview as well as Label as follows:
 <htmlb:textView text = "My Textview"
 design = "EMPHASIZED" />
 <htmlb:label for = "MyLabel"
 text = "Label "
 encode = "false"/>
Reward each helpful answer
Raja T
Message was edited by:
 Raja Thangamani

ERROR IN BDC SESSION BACK GROUND ( USING PP03 T.CODE)

Hi Experts,
When i am executing the session ( pp03 T.Code) ,it is working fine in fore ground as well as in display errors mode. But it is not working in back ground mode.
it is raising the exception ( cntl-system-error).
I used flat file which is in the presentation server . I accessed it by gui_upload Function Module.
 I am also getting the error using data sets . After upload the presentation server data into one internal table .I sent it to application server using open data set ( transfer ) , after that i read the application server data using open dataset ( read )
into another internal table ( i declared with same structure of flat file ) .
But this time also it is giving same error ( runtime exception).
Please tell me how can i handle using datasets . Its Very urgentttttttt
Please any body help meee ( If any one worked on this (pp03 T.code) ) .
Send the code or Inform the full detailsss as soon as possibleeee
regards ,
dattu malge.

Hi,
Go to the transaction SM35 and select your session and then click the Process Button.
Here you select the Processing Mode as "Background".
It is not possible to execute the same session by more than one user at a same time.
RSBDCSUB is used to automate the processing of Batch input session.
Cheers,
Hakim

Error while activating ODS is not caught in the back ground job..

Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumar

Hi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly

Back ground job problem

hi every one,
pls help me out in this.
i have written a program to create a wbs element.as it takes 20 to 30 min to create one element in production.in my program, there is part of code which creates wbs elements.
so i want to run tht part of code in background.
only part of code.
even i did the coding for it. i wrote a new program and i pasted that part of code in new program.
and this new program i m submitting in old one by creating a back ground job.
i m exporting few required internal tables for new report.i hav imported all internal tables in new report also..
but still this importing exporting is not happening..pls
tell me wat can be the problem..
thanks..

Your code is not optimized according to performance,can you sed me your code ...
see my business card for my id.
Thanks

Back ground job in abap

Dear abapers i want to send an excel attachment from my computer to email and i do that using the following code it works correctly but now i want the program to run in back ground twice a month to some ones email address by giving default recipient email address.
with best regards,
Hahu D.
REPORT YEMAIL12.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
 text(4096) type c,
 end of g_files.
data : fold_number(12) type c,
 fold_yr(2) type c,
 fold_type(3) type c.
parameters ws_file type rlgrap-filename default 'd:\files\file1.xlsx'.
* Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ws_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
* PROGRAM_NAME = SYST-CPROG
* DYNPRO_NUMBER = SYST-DYNNR
field_name = 'ws_file'
IMPORTING
file_name = ws_file.
call function 'SO_USER_READ_API1'
exporting
 user = g_user
* PREPARE_FOR_FOLDER_ACCESS = ' '
importing
 user_data = g_user_data
* EXCEPTIONS
* USER_NOT_EXIST = 1
* PARAMETER_ERROR = 2
* X_ERROR = 3
* OTHERS = 4
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
 g_objhead,
 g_objpara,
 g_objparb,
 g_receipients,
 g_attachments,
 g_references,
 g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'hahu daily test this'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'hahu daily fishikta ameley'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
 exporting
 method = method1
 office_user = sy-uname
 ref_document = g_ref_document
 new_parent = g_new_parent
importing
 authority = g_authority
tables
 objcont = g_objcnt
 objhead = g_objhead
 objpara = g_objpara
 objparb = g_objparb
 recipients = g_receipients
 attachments = g_attachments
 references = g_references
 files = g_files
 changing
 document = g_document
 header_data = g_header
* FOLMEM_DATA =
* RECEIVE_DATA =
* File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
 exporting
 method = method1
 office_user = g_owner
 ref_document = g_ref_document
 new_parent = g_new_parent
importing
 authority = g_authority
tables
 objcont = g_objcnt
 objhead = g_objhead
 objpara = g_objpara
 objparb = g_objparb
 recipients = g_receipients
 attachments = g_attachments
 references = g_references
 files = g_files
 changing
 document = g_document
 header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
 exporting
 method = method1
 office_user = g_owner
 ref_document = g_ref_document
 new_parent = g_new_parent
importing
 authority = g_authority
tables
 objcont = g_objcnt
 objhead = g_objhead
 objpara = g_objpara
 objparb = g_objparb
 recipients = g_receipients
 attachments = g_attachments
 references = g_references
 files = g_files
 changing
 document = g_document
 header_data = g_header.
*-- End of Program

Hi,
Will this help you.?
http://scn.sap.com/community/netweaver-administrator/blog/2010/02/25/how-to-email-output-from-background-jobs
Regards
Purnand

Problem in scheduling job in back ground

hi all,
My project scenario is ,i have written a program to create WBS element.
For 1 WBS creation ,In production it takes 20 to 30 min to create as there are many transactional bdcs.
so i want to run that perticular code (all bdcs) in back ground.
so i wrote another program with name 'zback_job_for_wbs_creation' and added all the required code.
in old program,i have written some code to execute this new program in back ground . this code is below..
FORM submit_for_job.
TABLES:btcevtjob.
DATA:l_jobname LIKE tbtco-jobname,
       l_jobnumber LIKE rsjobinfo-jobnumb.
DATA: count LIKE btcevtjob-jobcount,
        jobname LIKE btcevtjob-jobname.
DATA: job_was_released LIKE btch0000-char1.
jobname = 'WBS_CREATION'.
EXPORT s_scrnum TO MEMORY ID 'W_SCRNUM'.
EXPORT iscrh TO MEMORY ID 'W_ISCRH'.
EXPORT iscrl1 TO MEMORY ID 'W_ISCRL1'.
EXPORT iscrl2 TO MEMORY ID 'W_ISCRL2'.
EXPORT iscrl2b TO MEMORY ID 'W_ISCRL2B'.
EXPORT iscrl2a TO MEMORY ID 'W_ISCRL2A'.
EXPORT iscrl1a TO MEMORY ID 'W_ISCRL1A'.
CALL FUNCTION 'JOB_OPEN'
        EXPORTING
              jobname          = jobname
       IMPORTING
              jobcount         = count
SUBMIT zback_job_for_wbs_creation
with S_SCRNNUM IN S_SCRNUM
and return via JOB JOBNAME NUMBER COUNT TO SAP-SPOOL
WITHOUT SPOOL DYNPRO.
CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
     jobcount                    = count
     jobname                     = jobname
      strtimmed                   = 'X'
    IMPORTING
         job_was_released            = job_was_released
   EXCEPTIONS
        cant_start_immediate        = 1
        invalid_startdate           = 2
        jobname_missing             = 3
        job_close_failed            = 4
        job_nosteps                 = 5
        job_notex                   = 6
        lock_failed                 = 7
        OTHERS                      = 8
here i have put break-point in my submitted program..but its not going to the program and job gets closed successfully without executing my code( Submitted Program).
in above submit statement , if i just write submit progname and return ,then it goes to program.
but job_close function module throws exception no 5.
so pls help me out for this..
i want my submitted program to be run in back ground..
thanks.

Hi,
Start Job Monitor SM37 and search for your job. I think you will find it.
Jobs are not linked to GUI frontend. So you can't debug your background job in that way.
If you want to debug you must be tricky.
Code a never ending loop with an exit condition which you can control by debugging.
DATA:
stop_for_capture.
DO.
IF sy-uname NE 'HABICH'. "change to your account
EXIT.
ENDIF.
IF NOT stop_for_capture IS INITIAL.
EXIT.
ENDIF.
ENDDO.
When your job is running, start TA SM50 and mark relevant batch work process and
choose by menu program -> program -> debugging.
regards
Walter Habich

Problem with Back ground MRP Run (MDBT) or MD01

Hello SAP Experts,
Issue :- Material is not considering during Automatic back ground MRP run ( MDBT or MD01)
But when we run MRP in forground (MD02) system is considering the material.
we have checked both the selection parameter are same for MD01 and MD02 .
can you help us on this issue ?
Regards
Mahesh

Hi,
Problem is due to entry in Planing File is missing for that Material.
Go to MD21 and check whether Planing File entry is maintain for that Materiel.
If not then maintain it by T.code MD20 (Manual) or you can do it by using back Ground JOB - OMDU.
Regards,
Dhaval

Back Ground HELP

Similar Messages

Maybe you are looking for