Back Ground in Menu Help
I have installed a back ground in a menu and would like to know how I can re-size it. Currently the edges are outside the save area and I would like to make it smaller. The background was created in keynote and converted into a jpeg file. I'm running Studio 4...would love some help on this one
You will have to go back to Keynote (or bring it into iPhoto) to resize the background
Similar Messages
-
To connect MS Access database in back ground
Hello Gurus,
I have a requirement in which I need to connect to MS Access database in back ground as a daily job. I tried using OLE2, Its working fine in front end but failed in back ground.
Please help me in this regard.
Thanks,
Naresh.Hi naresh,
I am also facing this requirement to connect MS ACCESS database in front end or back end. Could you please help me out in this.
plz provide me steps and program.
thanks
Sarayu. -
Submit statemet not creating spool in back ground
Hi,
My program works perfectly fine(creates spool) when I execute in foreground. But it doesn't create the spool when I execute in back ground. Pls help...
SUBMIT rkaep000
WITH p_tcode = 'KOB2'
WITH aufnr IN r_aufnr
WITH r_budat IN r_date
WITH p_disvar = '/SCORP 1404'
TO SAP-SPOOL SPOOL PARAMETERS params
WITHOUT SPOOL DYNPRO
AND RETURN .Hi Chesat bs,
check demo program DEMO_LIST_SUBMIT_TO_SPOOL.
Hope this helps.
Thanks
Lakshman -
Back ground running of Standard reports
Hi,
I have some requirement in report processing. I need to run(in back ground) statndard structure reports for project def, WBS and activities and CM51 and CJI3. Then output should be saved in predefined folder in an excel format. The whole process of running and saving the report should be automated. And this job has to be run every night.
I have checked the option of running in back ground for structure reports but variant selection and saving in destination folder should be automated. I could not find the option of running CM51 in back ground.
Appreciate help in this regard
Regards,
LaxminarsimhaYou can try running of the program in the background - you will need to create a background job with the correct selection and display variants.
Go to SE93 and check the program
e.g. from SE93 enter CJI3 you will see the program is RKPEP003
now create a background job for this program with correct variants
Do the same for the other transaction -
Firefox is running in the back ground, how can I turn it off to reinstall it?
I tried to get into the save mode but Firefox still will not come up. I have uninstalled the program and reinstalled and still I can not get Firefox to come up on the screen. But when I shut down my computer it says it is running. It must e running the back ground. Please help me get Firefox working again. I think this is a Mozilla Problem because I did not install addons, etc.
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating -
Hello I'd like to know how to walk redo my iMessage on my ipod touch 4th . I connect and then says to choose an email address and it says < Check> and this is the me that his brings back on the menu. So please help me!
You can try
FaceTime, Game Center, Messages: Troubleshooting sign in issues
However, some other users have reported that did not work. No real solution has been posted here yet -
when i try to turn on my gen four ipod, a white screen appears. Parts of my back ground pop up.All this started to happen when i dropped my ipod when i took it out of the case. Please comment if you have something that can help me. thanks
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks
Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
If that is an accurate description of the problem, consider this:
Image 1: The original image
Image 2: Edit > Fill with the Blending mode set to Color. White remains white
Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
(I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.) -
How do i change my background on my laptop?? This is my first Mac and on my old PC you could just right click on photos and select it to you back ground. How do i do that stuff on a make?? Or cant it??
ThanksOpen the Desktop & Screensaver pane of System Preferences and select a desktop picture; alternatively, a picture in Safari can be used as the desktop picture by control-clicking it and choosing that option.
(31874) -
Problem in scheduling job in back ground
hi all,
My project scenario is ,i have written a program to create WBS element.
For 1 WBS creation ,In production it takes 20 to 30 min to create as there are many transactional bdcs.
so i want to run that perticular code (all bdcs) in back ground.
so i wrote another program with name 'zback_job_for_wbs_creation' and added all the required code.
in old program,i have written some code to execute this new program in back ground . this code is below..
FORM submit_for_job.
TABLES:btcevtjob.
DATA:l_jobname LIKE tbtco-jobname,
l_jobnumber LIKE rsjobinfo-jobnumb.
DATA: count LIKE btcevtjob-jobcount,
jobname LIKE btcevtjob-jobname.
DATA: job_was_released LIKE btch0000-char1.
jobname = 'WBS_CREATION'.
EXPORT s_scrnum TO MEMORY ID 'W_SCRNUM'.
EXPORT iscrh TO MEMORY ID 'W_ISCRH'.
EXPORT iscrl1 TO MEMORY ID 'W_ISCRL1'.
EXPORT iscrl2 TO MEMORY ID 'W_ISCRL2'.
EXPORT iscrl2b TO MEMORY ID 'W_ISCRL2B'.
EXPORT iscrl2a TO MEMORY ID 'W_ISCRL2A'.
EXPORT iscrl1a TO MEMORY ID 'W_ISCRL1A'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = count
SUBMIT zback_job_for_wbs_creation
with S_SCRNNUM IN S_SCRNUM
and return via JOB JOBNAME NUMBER COUNT TO SAP-SPOOL
WITHOUT SPOOL DYNPRO.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = count
jobname = jobname
strtimmed = 'X'
IMPORTING
job_was_released = job_was_released
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8
here i have put break-point in my submitted program..but its not going to the program and job gets closed successfully without executing my code( Submitted Program).
in above submit statement , if i just write submit progname and return ,then it goes to program.
but job_close function module throws exception no 5.
so pls help me out for this..
i want my submitted program to be run in back ground..
thanks.Hi,
Start Job Monitor SM37 and search for your job. I think you will find it.
Jobs are not linked to GUI frontend. So you can't debug your background job in that way.
If you want to debug you must be tricky.
Code a never ending loop with an exit condition which you can control by debugging.
DATA:
stop_for_capture.
DO.
IF sy-uname NE 'HABICH'. "change to your account
EXIT.
ENDIF.
IF NOT stop_for_capture IS INITIAL.
EXIT.
ENDIF.
ENDDO.
When your job is running, start TA SM50 and mark relevant batch work process and
choose by menu program -> program -> debugging.
regards
Walter Habich -
Back ground processes, dialogue processes and Process chains
Hai all,
I am going through making process chains and I am struck with one thing:
"How many background process chains and dialogue processes you have during run time"
This is the problem. I understood everything else except this.The concept says that I have to know what is the capacity of the system, how many background and dialogue processes it could accomodate, how many are left and how many you can use for your process chain.How do we find out this? and could somebody please explain me or refer to documentation about the Back ground processes, dialogue processes and Process chains.
Thanks.Hi Visu,
You can see the number of dialog and background processes by using transaction SM51 and then double clicking on the server (we only have one but it may be different for each). Our BASIS folks take care of the number of processes as well. And, for us we have a schedule that changes the number at a certain time of day because you tend to need more dialog during the day but more batch at night.
The transaction to look at and change the settings is RZ03. Then use the menu path Edit->Operation Modes you can select either Configuration or Timetable here. Both give information in different ways. I tend to double click around to see what it might tell me.
I hope this helps a bit,
Diane -
Hi,
My report program was executing successfully in the Foreground but not in the back ground.. Can any one help me on this?
My report program has a selection screen..I entered the data for it at and through menu option Program->execute in background..I executed it..As it asked for output device i gave LP01 and No of copies to 1. and checked Radio button Print all. and clicked ok.
It asked me for start time and i selected Immediate and clicked on save.
It gave a status message "Back ground Job Scheduled".
Now when i look through SM37 under my name the job is always active and Never finished.
Can any one help me on this?
Thank in advance..Just check whether the job is running in the background or not
Double Click on the job name and take the Server & Process Id.
Go back to the SM37 Screen.
Click on Application Servers or directly Open the transaction SM51.
Select the Server and find the process Id with the help of the things you found already
Now, you can see the database level.
Check if the values or moving or not. This way you could track the details
If not, Ask BASIS guys to check whether the job is reading from rollback or not.
If it is, cancel and rerun the job...or else..leave the job..it will finish off in some time.
Hope everything is clear -
Activate Info Object in Back ground
Hi
Experts,
Is there any option to Activate Info Object in Back ground
Regards,
Kiranhi Kiran,
Go to RSD1, put in your infoobject and click on change and go to the menu option, characteristic and there you will have an option of Activate in Background...
Hope it helps... -
why do we execute in reports back ground processing? what is the back ground processing? and what is the tcode for that in reports.? in back ground after generate a report how can we see whether it is succeed or not?
hi Sandya,
most time we execute reports in background for performance reason,
the report may run timeout if executed in foreground.
we can schedule background job for run, SM36.
or run the program in background from SE38, program name,
and menu execute - in background.
we can check the background job with SM37.
hope this helps. -
How to find the back ground job details
Hi All,
I have a back ground job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
Please informe me how to check this.
Thanks & Regards,
MuralikrishnaOn SM37 screen there is plenty of options are there:
This is what i got from SAP help
Explanation for each selection field:
o Jobname: Name of the job as an identifier.
o Username: Name of the user who designed and planned the job.
o Start date: The start condition of the job, which could be a time
frame or an event that the job is waiting for. Specifying both will
yield jobs whose starting condition is either of the two
conditions.
ABAP program step: Name of an ABAP program that acts as a step in a
job.
Status selection: The current status of the job. By default, the
SCHEDULED option is not marked. To see the scheduled jobs, you must
explicitly check this.
also give the proper values in Job Satus also.
Maybe you are looking for
-
User inputted letters with dynamic fields in Report Builder
I'm proactively trying to get certain aspects off our hands in IT and more specifically, the way letters are generated through ColdFusion. Right now we are using activeX controls (with some vbscript and asp pages) through IE to do Word mail merges f
-
Hello, I have recently experienced this problem opening an .obj file using Photoshop Extended CS6. I have checked About Photoshop, and yes it is the extended version. I have went to the Performance settings, the GPU is not accessible. Scrolling over
-
How do I set up phone so that messages do not show up in window
How do I set up my 5S so that text messages do not show up on the screen, just so it shows who sent the message.
-
BI Production Support Value Adds
Hi, I am working on a just started bi production support. There are not much activities as of now but I intend to bring in more work. I need to propose some value addition to the work process apart from just monitoring of chains. For ex. setting up e
-
how do i edit webpages in 10.10