Back ground programs running

How do I actually close the apps after I am done using them. i have everything open in the back ground running and using up my battery.

Apps in ios do not run in the background constantly.
They only run if they are completing a task.
Once the task is complete they are in a suspended state.

Similar Messages

Problem with Back ground MRP Run (MDBT) or MD01

Hello SAP Experts,
Issue :- Material is not considering during Automatic back ground MRP run ( MDBT or MD01)
But when we run MRP in forground (MD02) system is considering the material.
we have checked both the selection parameter are same for MD01 and MD02 .
can you help us on this issue ?
Regards
Mahesh

Hi,
Problem is due to entry in Planing File is missing for that Material.
Go to MD21 and check whether Planing File entry is maintain for that Materiel.
If not then maintain it by T.code MD20 (Manual) or you can do it by using back Ground JOB - OMDU.
Regards,
Dhaval

WorkFlow Back Ground Process Running More Time

Hi all,
I have very Big problem it is occured in production i need help vary urgent for this .
Work flow Back Ground Process Running More than 5 hrs,actualy Daily it is running only below 2 min .but yesterday onwords it is running more than 5 hrs.but this workflow back ground process running long time only one item_type='REQAPPRV' REMAING item_types running normaly.
i did have any root cause for this performance issue plz let me know any one for this problem what is the root cause.
Thank's

Reddy,
Go through the following documents, it should be helpful in troubleshooting the issue.
Note: 186361.1 - WF 2.x: Workflow Background Process Performance Troubleshooting Guide
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186361.1
Note: 298550.1 - Troubleshooting Workflow Data Growth Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=298550.1
Note: 566577.1 - Workflow Background Process Has Significant Performance Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=566577.1
Note: 743338.1 - Performance Degradation when the Workflow Background Process is Running
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=743338.1
Note: 734425.1 - How To Generate Performance Trace for Workflow Background Process?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=734425.1
If this is your production instance and the issue is urgent, I would suggest you log a SR.
Regards,
Hussein

Back Ground programs

Dear All,
i want all PP related Programs which will be run in Background for various Purposes in SM36/SM37
example background MRP, back ground Prodction orders relese , back ground production order delete etc ....
Regards
Madhu Kumar

Hi,
If you want to schedule a job for COOIS and COHV, you can use the Program PPIO_ENTRY for various reasons..
You can schedule the jobs for Release of Orders, TECO, CLSD, availability check and resetting the availabilty data.
Based on the selection at the entry screen, system will pick the production orders and does the Mass processing activities..
If you want to know the production Order based on some selection criteria, then you can create speicifi variant and schedule a job..
If you have a specific query regarding this, we can discuss further..
The Program for COGI is CORUAFFW - this is display of COGI data only.
This program will not do anything excent displaying the data..
There is another program for the same purpose: CORUPROC.
for eg. if you have goods movemnt errirs in COGI because of stock dficit, then after posting the stock, system will automatically take care of the postings with this program..
There is another program : CORUAFWP, which is having much more options than CORUPROC.
For both the programs a detailed documentation is available, check in SE38.
Best Regards,
Siva

Holding home key to quit back ground programs

With 2.1 we could hold the home key within a program and completely stop the program. How do we do that we 3.0 as the home key has different functions now?

hold the power/sleep button for a few seconds till the red power off slider appears then hold the home button for a few seconds and then hey presto back to your home screen with the offending app stopped!

Re: WorkFlow Back Ground Process Running More Time

Hi ,
I have a similar situation where Workflow Background Process is running for hours during peak business hours only for item type REQAPPRV.
Can you please suggest the action plan taken in your case.
Thanks,

user12558002 wrote:
Hi ,
I have a similar situation where Workflow Background Process is running for hours during peak business hours only for item type REQAPPRV.
Can you please suggest the action plan taken in your case.
Thanks,Please post the details of the application release, database version and OS.
Was this working before? If yes, any changes been done recently?
Can you find any errors in the CM/Workflow/DB log files?
Please see the following docs.
Workflow Background Process Hangs on Deferred = Yes and OM Order Line [ID 817642.1
Running "Workflow Background Process" During Day Time Hangs For 'OM Order Line' Parameter [ID 564504.1
WF 2.x: Workflow Background Process Performance Troubleshooting Guide [ID 186361.1]
How to Recreate a Corrupted Workflow Background Queue WF_Deferred_Table_M [ID 1176723.1]
Workflow Background Process Takes Long Time to Run After Conversion To ATG Rup5 DB 10g [ID 469702.1]
11.5.10.4: Workflow Background Process Seems To Take Longer After RUP.4 [ID 560144.1]
Performance Degradation when the Workflow Background Process is Running [ID 743338.1]
How Often or Frequent Should You Run Workflow Background Process to Improve Performance for Deferred OEOL? [ID 1308607.1]
Thanks,
Hussein

How to find the back ground job details

Hi All,
   I have a back ground job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
           Please informe me how to check this.
Thanks & Regards,
Muralikrishna

On SM37 screen there is plenty of options are there:
This is what i got from SAP help
Explanation for each selection field:
o   Jobname: Name of the job as an identifier.
o   Username: Name of the user who designed and planned the job.
o   Start date: The start condition of the job, which could be a time
frame or an event that the job is waiting for. Specifying both will
yield jobs whose starting condition is either of the two
conditions.
ABAP program step: Name of an ABAP program that acts as a step in a
job.
Status selection: The current status of the job. By default, the
SCHEDULED option is not marked. To see the scheduled jobs, you must
explicitly check this.
also give the proper values in Job Satus also.

How to run the program in back ground with out selection screen ?

Hi,
I want to run the program in back ground but don't have selection screen. How to run this program in back ground
as program has no selection screen.
Waiting for quick response.
Best Regards,
Padhy
Moderator message: basic, please search for available information/documentation.
Edited by: Thomas Zloch on Feb 21, 2011 12:43 PM

Hi,
Go to transaction SE38 --> Execute --> Background.
If your program contains selection screen, you have to pass your input values as variants.

I need to run the program in back ground and then update two fields

hi gurus
i need to run the program in back ground and then update two fields in the z table by mm02 transaction by using bapis , can any one give me the code for this.
Message was edited by:
Rocky

hi
good
go through this link
http://www.sapdb.org/7.4/htmhelp/34/ee7fba293911d3a97d00a0c9449261/content.htm
thanks
mrutyun^

How do I turn off programs running in the back ground on my iPad

How do I turn off apps running in the back ground with the new update

How to Close Apps
Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
From Here > http://support.apple.com/kb/HT4211

How do I turn off programs running in the back ground for iOS7?

How do i turn off programs running in the background using iOS 7?

*iOS 7 closing running apps*
Double-tapping the Home button will bring up the running apps icons along with an app screenshot "card" above the icon. Tap-drag the app's -card- (NOT the icon) up and off the screen.

How to Run a Custom Transaction in Back Ground after give the Input?

Hi,
I have problem that how to execute a Custom Transaction in Back Ground after end user will save a variant for input. In my Transaction there is no menu to save a Variant & to Execute in Back Ground.
Please suggest me how to do this in my Custom Transaction.

Hi Ramana,
what kind of report you want to execute? the report is Executable Report or Modulepool prog. ??
if it is a executable program so when u execute (F8) from SE38 when u find the selection-screen in the menu bar ->Program ->Execute in Background( F9) option exits there u can schedule your report in Background or else use toce SM36 ( Define Background Job).
Why you want to run it in background with transaction code if you have this options?
Regards,
Sunil kairam.

How to see the SQL running in back ground when we genarate a report.

Hi All,
I am new to Oracle Reports Builder toll and I would like to see the SQL query/script running in back ground when we run any perticular report using Reports Builder 10g.
Please help me with this query, Thank You Very much for your help in Adv.
Thanks,

Hi,
well the only option you can try is enabling trace from Builder (Program --> Tracing --> ALL) and then from the OS keep checking the trace file being created when the report is running. Something like the following will be recorded.
example
10:14:18 APP .. ( Repeating Frame R_G_EMPNO
10:14:18 APP ... ( Group G_EMPNO Local Break: 0 Global Break: 0
10:14:18 APP .... ( Query Q_1
10:14:18 SQL EXECUTE QUERY : select * from emp where deptno=:x
Bind Variable Value
X 10
10:14:18 APP .... ) Query Q_1
10:14:18 APP ... ) Group G_EMPNO
10:14:18 APP ... ( Text Field F_DEPTNO
Hope this helps
Roberto

Program with Back Ground User.

Hi ,
In my development we are sending data from MDM to R3 through XI.
Here iam having the following issue:
When sending IDOC's from XI to R3, some of the IDOC's are struck in Queue with status 64 and, those not going to be processed at all. This is because of the unavailability of the work processes at that time. All this is done through the back ground user XIS_REMOTE.
Iam trying to process the unprocessed IDOC's through a standard program, all the IDOC's are processed, but the data created under the Fore Ground user (i.e. my id).
<b>I want to know is there any possibility to run or write the program using back ground user XIS_REMOTE</b> <b>so that all the unprocessed IDOC's will process and get the back ground user XIS_REMOTE.</b>
Any inputs appriciated.
Best Regards
Shyam Reddy.

ST05 you can trace SQL-statements and get expainings how these statements are being worked upon by the database. this is more a tool for investigating the performance of abaps on your 'special' database.
since you posted your request in the security forum i will assume that you want to do an authority trace. use tx. ST01 instead of ST05. Set the filter options to the program and/or user you want to trace and flag the areas you want traced like 'authority check' 'database access' 'kernel commands' ...
activate the trace using the matchlight-icon. run the background job to be traced. stop the trace after a sufficient time (or until the job hits the error you want to investigate). then press 'evaluation' and check the boxes for the lines to be displayed again ...
if both my answers don't fit to your problem come back here and state a bit more precisely what your problem is, maybe we find another approach to it.

Back ground job for automatic MRP run

Hi pp guru,
my client want for a particularly material no XXXXXX ,there should be automatic MRP rum daily at 8:00 pm.
kindly suggest me how i will map back ground job in sap..
regards
Aqueel

Dear Aqueel,
1.Either make a copy of the MRP type say PD and assign the new MRP type to that paticular material.
2.Or else assign one MRP controller sepecifically for this material.
3.Activate the User Exit M61X0001 which allows to run the MRP in background based on MRP type or
a MRP controller.
4.Create the varaint for running MRP in MDBT.Schedule from here.
or else use SM36 select the program RMMRP000 and select the variant and go to scehduling and
select the time and execute.
Regards
Mangalraj.S

Back ground programs running

Similar Messages

Maybe you are looking for