Back ground

Hi Friends ,
I have got a clasical report to display it in back ground , when i look at the output length in back ground the is not exceeding more than 255 charecters ,
My out put length is more than 255 charecters due to which few colums are not displayed in back ground .
Can any body help me displaying the whole out put in back ground mode.
It is urgent ,
Full points awarded
Anil

Anil,
I understand your problem. As long as i understand, when you execute a report in background the list goes to the spool output. The maximum width of the spool output is only 255 chars even though the list output can have a maximum of 1023 chars.
NB: Reward points if found useful.
I have heard that you can read those spool output with length > 255 chars... you can try using this system call....
CALL 'C_RSTS_OPEN_READ' ID 'HANDLE' FIELD HAND4
                       ID 'CLIENT' FIELD HIDE_CLIENT
                       ID 'NAME'   FIELD HIDE_NAME
                       ID 'PART'   FIELD HIDE_PART
                       ID 'RC'     FIELD RSTSRC
                       ID 'ERRMSG' FIELD ERRMSG.
CALL 'C_RSTS_READ' ID 'HANDLE' FIELD HAND4
                   ID 'BUFTAB' FIELD BUFTAB-SYS
                   ID 'MAXIX' FIELD 10000
                   ID 'RC'     FIELD RSTSRC
                   ID 'ERRMSG' FIELD ERRMSG
I am not sure how to use them actually.
Regards
Balaji

Similar Messages

How To Handle With Back Ground JOB From WEBUI When Click On "Appove"

Hi
How To Scheduled A Job Through ABAP Report In back end Of CRM when i click on "Approve" Button in WEBUI From result list.
As per My requirement I have a Search View and Result View
In Search View I have Below Fields
ITC Vendor ID
Claim Status
User status (date status changed)
Model
Serial Number
Date completed of Service Completion
Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
In the Result View I need to Add one Button As "Approve"
When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
"Approve Claim Job Has Started In Background
Note: Only Claims Which are in Submitted Status Will be Approved. you May Close This Window"
In SAP CRM System Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
In the Back Ground ABAP Report which will validate based on Result List Records"
In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
I need to collect all records from Result list and validate Those Records who's Status in "Submitted
1)Sort all the claims based on ITC Vendor ID.
2)Grouped all the submitted claims against each ITC Vendor ID from the search result
3)Change the status of the selected submitted claims to Approved.
4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
5)Sending Email to each IRC.
6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
7)Store the file in the Application Server AL11 in .csv format
Please Find Attachement For Reference.
1)ITC Claim Screen Shot
2)Screen Shot For Attachment
Thanks
Raj

Hi,
You can add the following code in on approve method to show popup to the user,
IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
 REFRESH lt_buttons.
 lss_button-id = 'btnyes'.
 lss_button-text = 'YES'.
 lss_button-on_click = 'YES'.
 APPEND lss_button TO lt_buttons.
 CLEAR lss_button.
 lss_button-id = 'btnno'.
 lss_button-text = 'NO'.
 lss_button-on_click = 'NO'.
 APPEND lss_button TO lt_buttons.
 CLEAR lss_button.
 CALL METHOD comp_controller->window_manager->create_popup_2_confirm
 EXPORTING
 iv_title = 'ATTENTION'
 iv_text = 'Are you sure you want to edit this document?'
 iv_btncombination = '99'
 iv_custombuttons = lt_buttons
 RECEIVING
 rv_result = req_edit.
 req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
 req_edit->open( ).
 RETURN.
ELSE.
 lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
 lv_outbound = lr_node->get_event_name( ).
* CLEAR ptc_pricing_status.
* lv_outbound = req_edit->get_fired_outbound_plug( ).
 IF lv_outbound = 'YES'.
you can use the submit report code here and you can al the validations here
 ELSE. " No
if user clicks no nothing to do..
 ENDIF.
 CLEAR req_edit.
ENDIF.
Best Regards,
Dharmakasi.

How to find the back ground job details

Hi All,
   I have a back ground job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
           Please informe me how to check this.
Thanks & Regards,
Muralikrishna

On SM37 screen there is plenty of options are there:
This is what i got from SAP help
Explanation for each selection field:
o   Jobname: Name of the job as an identifier.
o   Username: Name of the user who designed and planned the job.
o   Start date: The start condition of the job, which could be a time
frame or an event that the job is waiting for. Specifying both will
yield jobs whose starting condition is either of the two
conditions.
ABAP program step: Name of an ABAP program that acts as a step in a
job.
Status selection: The current status of the job. By default, the
SCHEDULED option is not marked. To see the scheduled jobs, you must
explicitly check this.
also give the proper values in Job Satus also.

Any restictions on back ground job when submit the session?

Hello friends
below is my code part. problem is when i execute this program in back ground the data is not picking from APQI. but in fore ground it is picking . for this SESSION submission in back ground am i missing any thing here. please suggest me , any restiction is their in back ground? if possible please send a sample code to submit SESSION automatically in background.
    SUBMIT rsbdcsub AND RETURN
                    USER sy-uname
                    WITH mappe    = p_group
                    WITH von      = sy-datum
                    WITH bis      = sy-datum
                    WITH z_verarb = 'X' .
      SELECT userid credate groupid qstate FROM apqi
         INTO TABLE it_apqi
         WHERE userid = sy-uname
         AND   credate = sy-datum
         AND   groupid = p_group
         AND   qstate = 'E'.              "Only look for 'Error' status
   DESCRIBE TABLE it_apqi[] LINES temp.

Codes for Submitting the session through RSBDCSUB (via Job)...
" The function module JOB_OPEN is called to create the job.
    call function 'JOB_OPEN'
         exporting
              delanfrep        = 'X' "Delete job after execution
              jobname        = fv_jobname "Job name
         importing
              jobcount         = fv_jobcount "Internally generated
         exceptions
              cant_create_job = 1
              invalid_job_data = 2
              jobname_missing = 3
              others           = 4.
    if sy-subrc = 0.
      submit rsbdcsub
             with       mappe = v_filec
             with            von = sy-datum      "From
             with            bis = sy-datum      "To
             with     z_verarb = 'X'
             with         fehler = ' '
             with      batchsys = space
             with         logall = ' '
             via job          fv_jobname
                  number       fv_jobcount
             and return.
      call function 'JOB_CLOSE'
           exporting
                jobcount             = fv_jobcount
                jobname              = fv_jobname
                strtimmed            = 'X'
           exceptions
                cant_start_immediate = 1
                invalid_startdate    = 2
                jobname_missing      = 3
                job_close_failed     = 4
                job_nosteps          = 5
                job_notex            = 6
                lock_failed          = 7
                others               = 8.
Hope this helps!
Edited by: Vin on Jun 4, 2009 10:58 AM

Problem in Back Ground Job

Hi Experts,
I want to execute a program in Back ground but my program has selectionscreen.
I don't want to Provide Variant for this screen that's why i am passing these values Thru INITILIZATION event.
But Background is not moving forward. It is waiting for I/p.
Can you please help me on this.
Thanks,
Murali Krishna K

Murali,
For a program to be executed in background you need to create a variant and provide the variant name in the def. of the background job. giving the values at INITIALIZATION will NOT work.
On the second thought, you might have declared your parameters as OBLIGATORY. Take out that and make them optional. Now you schedule this in background without a variant and give the values in the INITILIZATION event.
Regards,
Ravi
Note : Please close the thread of the issue is resolved.
Message was edited by: Ravikumar Allampallam

Scheduling Back Ground job

Hi All,
I need to schedule a daily background job for MB52 transaction and need to save the output of MB52 in a specified directory .
Can any one tell me whether it is possible to save back ground job output in specified directory?
Thanks & Regards
k.Nirmala

Hi Nirmala,
Set up variant at MB52 transaction and use SM37 and Sm36 transaction to schedule job.
Define job at Sm36 and use program - RM07MLBS and use your variant.
schedule job and set up time and date for periodcally.
and it will run and you can see the status at SM37 Transaction .
the background job will create spool and which will contain your output.
if you want to download your output ,then you need to write custom program to get spool information from TSP01 table and use open dataset command to down load specifi directory.
Reward Points if it is helpful
Thanks
Seshu

Set back ground color to a particular cell in table view

hi,
 iam working on a jspDynpage and have a htmlb table view for which i need a way to set back ground color to a particular cell in table view, the color has to be set based on a value..is there a way to do it without using an iterator...well iam using a cellRenderer for the table but cant find a way to set the colors...if anyone does have a way please do reply...regards

You can mention the color in textview as well as Label as follows:
 <htmlb:textView text = "My Textview"
 design = "EMPHASIZED" />
 <htmlb:label for = "MyLabel"
 text = "Label "
 encode = "false"/>
Reward each helpful answer
Raja T
Message was edited by:
 Raja Thangamani

How to Run a Custom Transaction in Back Ground after give the Input?

Hi,
I have problem that how to execute a Custom Transaction in Back Ground after end user will save a variant for input. In my Transaction there is no menu to save a Variant & to Execute in Back Ground.
Please suggest me how to do this in my Custom Transaction.

Hi Ramana,
what kind of report you want to execute? the report is Executable Report or Modulepool prog. ??
if it is a executable program so when u execute (F8) from SE38 when u find the selection-screen in the menu bar ->Program ->Execute in Background( F9) option exits there u can schedule your report in Background or else use toce SM36 ( Define Background Job).
Why you want to run it in background with transaction code if you have this options?
Regards,
Sunil kairam.

ERROR IN BDC SESSION BACK GROUND ( USING PP03 T.CODE)

Hi Experts,
When i am executing the session ( pp03 T.Code) ,it is working fine in fore ground as well as in display errors mode. But it is not working in back ground mode.
it is raising the exception ( cntl-system-error).
I used flat file which is in the presentation server . I accessed it by gui_upload Function Module.
 I am also getting the error using data sets . After upload the presentation server data into one internal table .I sent it to application server using open data set ( transfer ) , after that i read the application server data using open dataset ( read )
into another internal table ( i declared with same structure of flat file ) .
But this time also it is giving same error ( runtime exception).
Please tell me how can i handle using datasets . Its Very urgentttttttt
Please any body help meee ( If any one worked on this (pp03 T.code) ) .
Send the code or Inform the full detailsss as soon as possibleeee
regards ,
dattu malge.

Hi,
Go to the transaction SM35 and select your session and then click the Process Button.
Here you select the Processing Mode as "Background".
It is not possible to execute the same session by more than one user at a same time.
RSBDCSUB is used to automate the processing of Batch input session.
Cheers,
Hakim

Error while activating ODS is not caught in the back ground job..

Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumar

Hi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly

BAPI_DOCUMENT_CREATE2 - Document upload to DMS - Back ground

Hi,
We are trying to uploda a file into DMS(CV01N) from SAP R/3, BAPI 'BAPI_DOCUMENT_CREATE2'. This works fine in foregroung but when we ececute it in background, we get an error saying 'Error while checking in and storing'.
Could anyone please suggest me if we can sucessfully execute in back ground mode?
Thanks,
Ranjith Singh.

it is not possible to download in background to a presentation server (your local PC) hence it is not possbile to upload either.
when you submit the program to the background thenthe session is no longer attached to the PC that created it.
Because of this you have to go via the application server.
compare hundred of threads by searcing the ABAP forum with keywords +download +background
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0901cba-f49e-2910-748c-d7ce4c0c4c1c

Error in Back Ground processing of a report.

Hi All,
I have a report wherein I need to schedule it in background. Its an ALV report and it has got user defined GUI status. But for one of the selection options, only output is being displayed. Can this be scheduled in Back Ground?

Hi all,
Thanks for your reply.
I got the solution. When a program is scheduled in background, if it is written in classes and ALV grid display is used, we get this error. I am able to schedule when I change the function module to LIST_DISPLAY.

How do I turn off programs running in the back ground on my iPad

How do I turn off apps running in the back ground with the new update

How to Close Apps
Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
From Here > http://support.apple.com/kb/HT4211

Back ground job

Hi Experts,
See the following code.
When i run this program in fore ground it is giving time out error.Current running time is 600 Sec.When i run in Back ground with Immediate.Excute option after some time the job is cancled.When i see the job log It is mentioned as "More memory space requested".
Can any body Plz go thru the code and tell me what is the problem?
*& Report ZTEST_XML
REPORT ZTEST_XML.
*data: ifile like salfldir occurs 0 with header line.
data:p_path TYPE rsmrgstr-path value 'F:\usr\sap\CD5\serena\OCOS\'.
data: p_file type string.
TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
data(256) TYPE x,
END OF t_xml_line.
data: BEGIN OF t_xml occurs 0,
rec TYPE x,
END OF t_xml.
data: begin of jtab occurs 0,
 text type string,
 end of jtab.
DATA: l_xml_table TYPE TABLE OF t_xml_line. " XML Table of the structure
data: wa(256) type x.
data: wa_xml like l_xml_table occurs 0.
data: l_str type string.
data: start_line type i,
 end_line type i,
 v_str type string.
data: cnt type i,
 idx type i,
 count1 type i,
 len type i,
 diff type i.
data: catalogid type string.
DATA : BEGIN OF DAT OCCURS 0,
 LIN type string,
 END OF DAT.
DATA: BASIC_TEXT LIKE THEAD OCCURS 0 WITH HEADER LINE.
DATA: YGUID LIKE COMM_PCAT_CTY-GUID,
 ZGUID LIKE COMM_PCAT_CTV-PARENT_CATEGORY.
DATA: BASICTEXT like TLINE OCCURS 0 WITH HEADER LINE.
DATA: IT_THEAD LIKE THEAD OCCURS 0 WITH HEADER LINE.
data: begin of IT_SERENA occurs 0,
 ID LIKE COMM_PCAT_CTY-ID,
 TEXT type string,
 end of IT_SERENA.
DATA:WA_SERENA like IT_SERENA.
DATA: wa_files TYPE rsfillst,
ifile LIKE TABLE OF wa_files.
data: begin of it_error occurs 0,
 err type string,
 end of it_error.
data: errorfile type string value 'error.txt'.
CALL FUNCTION 'SUBST_GET_FILE_LIST'
EXPORTING
 DIRNAME = p_path
 FILENM = '*'
PATTERN =
TABLES
 FILE_LIST = ifile
EXCEPTIONS
ACCESS_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at ifile into wa_files.
if not wa_files-name cs '.xml'.
 delete ifile.
endif.
endloop.
loop at ifile into wa_files.
concatenate p_path wa_files-name into p_file.
open dataset p_file for input in text mode encoding default.
if sy-subrc = 0.
 do.
 read dataset p_file into l_str.
 if l_str = space.
 exit.
 endif.
 if sy-subrc <> 0.
 concatenate text-002 p_file into it_error-err.
 append it_error.
 clear it_error.
 exit.
 else.
 jtab-text = l_str.
 append jtab.
 clear jtab.
 endif.
 enddo.
else.
 concatenate text-001 p_file into it_error-err.
 append it_error.
 clear it_error.
 continue.
endif.
loop at jtab.
 if jtab-text cs 'Catalog ID'.
 idx = sy-tabix .
 endif.
endloop.
read table jtab index idx.
if sy-subrc = 0.
 catalogid = jtab-text.
endif.
if catalogid cs '<![CDATA['.
 shift catalogid left by 56 places.
endif.
if catalogid cs ']]></field>'.
 replace ']]></field>' with space into catalogid.
endif.
write:/ 'Catalogid is:', catalogid.
IT_SERENA-ID = catalogid.
LOOP AT jTAB.
 if jtab-text cs 'longDescription'.
 start_line = sy-tabix + 1.
 exit.
 endif.
endloop.
cnt = start_line.
do.
 read table jtab index cnt.
 if jtab-text cs '</field>'.
 end_line = sy-tabix.
 exit.
 else.
 cnt = cnt + 1.
 endif.
enddo.
loop at jtab from start_line to end_line.
 concatenate jtab-text v_str into v_str separated by space.
endloop.
shift v_str left by 18 places.
shift v_str left by 10 places.
len = strlen( v_str ).
DO.
 IF COUNT1 >= LEN.
 EXIT.
 ENDIF.
 DIFF = LEN - COUNT1.
 IF DIFF < 125.
 DAT-LIN = v_str+COUNT1(DIFF).
 ELSE.
 DAT-LIN = v_str+COUNT1(125).
 ENDIF.
DAT-LIN = v_str+COUNT1(125).
 APPEND DAT.
 WRITE :/ DAT-LIN.
 CLEAR DAT.
 COUNT1 = COUNT1 + 125.
ENDDO.
REFRESH BASIC_TEXT.
REFRESH BASICTEXT.
CLEAR YGUID.
CLEAR ZGUID.
SELECT SINGLE GUID FROM COMM_PCAT_CTY INTO YGUID
 WHERE ID = IT_SERENA-ID.
IF NOT YGUID IS initial.
if sy-subrc <> 0.
 concatenate text-003 p_file into it_error-err.
 append it_error.
 clear it_error.
else.
 SELECT SINGLE GUID FROM COMM_PCAT_CTV INTO ZGUID
 WHERE PARENT_CATEGORY = YGUID.
ENDIF.
BASIC_TEXT-TDOBJECT = 'PCAT_CTY'.
BASIC_TEXT-TDNAME = ZGUID.
BASIC_TEXT-TDID = '0001'.
BASIC_TEXT-TDSPRAS = 'EN'.
APPEND BASIC_TEXT.
loop at DAT.
 BASICTEXT-TDFORMAT = '*'.
 BASICTEXT-TDLINE = DAT-LIN.
 APPEND BASICTEXT.
endloop.
refresh DAT.
loop at basictext.
 if basictext-tdline cs '![CDATA['.
 replace '![CDATA[' with space into basictext-tdline.
 ENDIF.
 modify basictext.
ENDLOOP.
loop at basictext.
 if basictext-tdline cs ']]>'.
 replace ']]>' with space into basictext-tdline.
 modify basictext.
 endif.
endloop.
CALL FUNCTION 'SAVE_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 HEADER = BASIC_TEXT
INSERT = 'X'
 SAVEMODE_DIRECT = 'X'
OWNER_SPECIFIED = ' '
LOCAL_CAT = ' '
 IMPORTING
FUNCTION =
 NEWHEADER = IT_THEAD
 TABLES
 LINES = BASICTEXT
EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 OBJECT = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR IT_THEAD.
IF SY-SUBRC = 0.
 WRITE:/ 'DATA UPLOADED SUCCESSFULLY'.
ELSE.
 WRITE:/ 'DATA NOT UPLOADED'.
ENDIF.
refresh jtab.
refresh DAT.
COUNT1 = 0.
clear v_str.
REFRESH BASICTEXT.
refresh dat.
close dataset p_file.
endloop.
open dataset errorfile for appending in text mode encoding default.
if sy-subrc = 0.
loop at it_error.
 transfer it_error-err to errorfile.
endloop.
close dataset errorfile.
endif.
Is there any other FM which is similar to SAVE_TEXT?

That depends. Can you please provide some more info how the programs are linked:
several steps in batch planning
cascade of submits
and what kind of failure might occur:
shortdump
Kind Regards
Klaus

Back ground job problem

hi every one,
pls help me out in this.
i have written a program to create a wbs element.as it takes 20 to 30 min to create one element in production.in my program, there is part of code which creates wbs elements.
so i want to run tht part of code in background.
only part of code.
even i did the coding for it. i wrote a new program and i pasted that part of code in new program.
and this new program i m submitting in old one by creating a back ground job.
i m exporting few required internal tables for new report.i hav imported all internal tables in new report also..
but still this importing exporting is not happening..pls
tell me wat can be the problem..
thanks..

Your code is not optimized according to performance,can you sed me your code ...
see my business card for my id.
Thanks

Back ground job in abap

Dear abapers i want to send an excel attachment from my computer to email and i do that using the following code it works correctly but now i want the program to run in back ground twice a month to some ones email address by giving default recipient email address.
with best regards,
Hahu D.
REPORT YEMAIL12.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
 text(4096) type c,
 end of g_files.
data : fold_number(12) type c,
 fold_yr(2) type c,
 fold_type(3) type c.
parameters ws_file type rlgrap-filename default 'd:\files\file1.xlsx'.
* Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ws_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
* PROGRAM_NAME = SYST-CPROG
* DYNPRO_NUMBER = SYST-DYNNR
field_name = 'ws_file'
IMPORTING
file_name = ws_file.
call function 'SO_USER_READ_API1'
exporting
 user = g_user
* PREPARE_FOR_FOLDER_ACCESS = ' '
importing
 user_data = g_user_data
* EXCEPTIONS
* USER_NOT_EXIST = 1
* PARAMETER_ERROR = 2
* X_ERROR = 3
* OTHERS = 4
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
 g_objhead,
 g_objpara,
 g_objparb,
 g_receipients,
 g_attachments,
 g_references,
 g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'hahu daily test this'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'hahu daily fishikta ameley'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
 exporting
 method = method1
 office_user = sy-uname
 ref_document = g_ref_document
 new_parent = g_new_parent
importing
 authority = g_authority
tables
 objcont = g_objcnt
 objhead = g_objhead
 objpara = g_objpara
 objparb = g_objparb
 recipients = g_receipients
 attachments = g_attachments
 references = g_references
 files = g_files
 changing
 document = g_document
 header_data = g_header
* FOLMEM_DATA =
* RECEIVE_DATA =
* File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
 exporting
 method = method1
 office_user = g_owner
 ref_document = g_ref_document
 new_parent = g_new_parent
importing
 authority = g_authority
tables
 objcont = g_objcnt
 objhead = g_objhead
 objpara = g_objpara
 objparb = g_objparb
 recipients = g_receipients
 attachments = g_attachments
 references = g_references
 files = g_files
 changing
 document = g_document
 header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
 exporting
 method = method1
 office_user = g_owner
 ref_document = g_ref_document
 new_parent = g_new_parent
importing
 authority = g_authority
tables
 objcont = g_objcnt
 objhead = g_objhead
 objpara = g_objpara
 objparb = g_objparb
 recipients = g_receipients
 attachments = g_attachments
 references = g_references
 files = g_files
 changing
 document = g_document
 header_data = g_header.
*-- End of Program

Hi,
Will this help you.?
http://scn.sap.com/community/netweaver-administrator/blog/2010/02/25/how-to-email-output-from-background-jobs
Regards
Purnand

Back ground

Similar Messages

Maybe you are looking for