Back.  How do put the new serial number on my itunes?

My ipod nano was recalled and chances are I will not get my original one back.  How do I put the new serial number on my itunes so my computer will recognize the new (refurbished) one?

I'm not sure that you need to. iTunes will read the serial number from the new iPod when you hook it up. If you aren't talking about the iPod serial number, but instead talking about the iTunes user ID and password, keep using what you have.

Similar Messages

  • HT201304 Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you

    Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you
    i have ibad mini
    and iphone4
    laptop sony
    can you sent for me the anser

    Changing Account Information  >  http://support.apple.com/kb/HT1918

  • How to put the new developed Requirement into an output type procedure...

    Hi,
    If we developed an new Requirement for an output type, how to put this new requirement number into the output type procedure???
    for example: RV61B912
    The requirement number is 912.
    Thanks

    any helps?
    Thanks

  • How to get the iphone serial number  in application?

    hello,  everyone
       i  really want to konw how to get the iphone serial number in aplication ?  As it's different from uniqueIdentifier ....
    thank you

    Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
    and it is a good idea to install STB on your machines.
    If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
    I believe that on this platform, sneep gets the serial from the output of prtconf.
    There is a minor correction to be made :
    After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
    man -M /opt/SUNWsneep/man sneep
    with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
    that you will find on the physical serial tag.
    The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

  • Im having trouble activating my CS2 with my original serial number as well as the new serial number privided by Adobe

    im having trouble activating my CS2 with my original serial number as well as the new serial number privided by Adobe

    You must download and install the CS2 version provided by Adobe and you must use the new serial number provided by Adobe.
    https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads

  • Where do I get the new serial number?  Instructions say it was provided with the download for CS2.  I don't see it anywhere.

    where do I get the new serial number?  Instructions say it was provided with the download for CS2.  I don't see it anywhere.

    If the serial numbers were prominently listed, I wouldn't be in here asking questions.  The instructions said the serial number would be emailed to me or show up in my account.  I got neither one.  I tried the one off the original CS2 Premium CD box,
    but it didn't accept that one either.  So where is this number so prominently displayed?

  • How to get the motherboard serial number?

    Hi
    i am writting an application which will encrypt the motherboards serialnumber and other info to do an activation of my application.
    inevitably locking my program to a specific PC.
    Does anyone know how i can get the motherboards serial number?
    I tried the wmi but get so many errors like missing prototype and not declared.
    I dont know when to start using the Windows Management Instrumentation with regards to Lab windows/CVI.
    Can anyone help me?
    Thanks
    Shako
    Help share your knowlegde

    I made up a small example that shows how to use WMI in CVI.
    Unfortunately, I tested it on two systems (Win XP and Win7) and the serial number that can be retrieved in System Enclosure (that should be the S/N assigned by the PC producer) is always blank.
    I will try to locate additional infos on this matter, in the meanwhile you may want to experiment with the example and search for other available infos (like for example OS or disk s/n) to create your own security system.
    The example can be found here.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to get the card serial number while installing applet

    I understand that I can retreive the card serial number from CPLC data. The getCPLCData () requires APDU objects in which it is not available at installation time.
    Does anyone suggust to me how to retrieve serial number while applet installation?

    while INSTALL is running?
    I guess there is no way to do this...

  • How to validate the existing Serial number while doing the GR.

    Dear,
    When we are doing the GR, If we  given existing Serial number is  in input System is accepting and update in the existing serial number (Equipment).
    It is  throwing error when equipment is in ESTO status and Stock information is available in the equipment but  When equipment is in AVLB status without stock information in equipment it is updating in the same Equipment / Serial number and status is changed to ESTO.
    However my Requirement is system should not allow or throw error when we are give input  existing serial number while doing GR, How to do this.
    Regards
    Kishore

    while INSTALL is running?
    I guess there is no way to do this...

  • How to get the right Serial Number during Pick Release

    Please we need your help to get the right serial number => Auto-Allocate on YES, Pick Confirm with NO.
        A problem is occurring during the Pick Release process.  Custom code has been added to the hook INV_DETAIL_SERIAL_PUB to provide the Pick Release process with the serial number to pick for the item being pick released.  The hook works and the Pick Release process picks the correct (specified) serial number.  However, at some point later in the Pick Release process the lot number is chosen and the process seems to pick the first lot number it finds available for the item – it does not take into account the serial number provided by the hook.  This causes the Pick Release process to fail when the lot number chosen is not the lot number linked to the serial number.  Has anyone else encountered this same issue?
        An example:
    Item ABC123
    Serial SER001 – Lot LOT001
    Serial SER002 – Lot LOT002
    Serial SER003 – Lot LOT003
    Item ABC123 is being pick released.
    The customised hook provides the Pick Release process with serial SER002.
    The Pick Release process correctly uses SER002, but chooses lot LOT001.
    thanks!
    Francisco

    Hi,
    I guess you have added the code at slightly different place.
    Pick Release Process will always allocate lots based on Inventory Picking Rule (or WMS Pick Strategy if you are using WMS).
    So if you want to override that you much first delete the MTLT record (inv_trx_util_pub.delete_lot_ser_trx), then insert MTLT with your Lot number (inv_trx_util_pub.insert_lot_trx)..then insert MSNT (inv_trx_util_pub.insert_ser_trx) with your serial number.
    Ensure that transaction_temp_id on MSNT should match with SERIAL_TRANSACTION_TEMP_ID on MTLT table.
    Thanks,
    Hrishi

  • Apple put the wrong serial number on my replacement MBP invoice

    Hi all.
    In short - I purchased a MBP early 2011 which I needed to return for replacement 3 days later. This was done on the spot and a replacement invoice was to be emailed to me. I purchased AppleCare with my original MBP and I was told that this would automatically transfer and be registered with my replacement model. I must say I was pretty impressed with the speed and hassle-free nature of the service (for my first ever Mac as well).
    Unfortunately, I have just checked the status of my Apple Care and noted that it was listed as expired !!!
    Doing my research, it appears that on the invoice for the 'replacement' unit they sent me, they listed the original (faulty unit) serial number for both the unit that was returned, and the replacement unit. This was obviously an error because they gave me a brand new unit in a new box and I am typing on it right now. I also noted that they 'returned' my old AppleCare Agreement and applied a 'new' AppleCare Agreement (with new agreement number) but it has the returned MBP serial number listed (not the new one) !!!!!
    I am looking for suggestions on how to get this rectified for the following reasons:
    - I need my Apple Care that I paid for to be applied to the correct unit
      - I need my current Apple MBP to be registered to me as the owner (I have no idea who they would have it registered to at the moment given the invoice is incorrect .........)
    I look forward to any advice you might have, and suggestions as to any problems I might expect in dealing with Apple.
    Regards,
    Tim

    (800) APL-CARE (800-275-2273).
    They should be able to straighten things out - be sure that you have all your paperwork together (old sn, new sn, receipt - if you have it - etc.).
    Good luck,
    Clinton

  • How to enter a new serial number

    Ok I did the wrong thing. But now trying to fix it.
    I had an urgent document to send off today but pages wouldn't save as the trial ran out. Today.
    To get around this I used a workmates serial as a temp fix.
    I've now bought iWork so I now have my own legal serial.
    Just can't work out how to use it.
    Tried moving the iWork folder in the applications folder to the trash.
    Then re-installed. Still doesn't start as a trial so I can use the serial.
    How do I now use my legal serial number?

    Hello
    Trash the file:
    <bootVolume>:Library:Preferences:com.apple.iWork08.plist
    empty the trash
    then run any application of the iWork's package.
    Yvan KOENIG (from FRANCE jeudi 7 février 2008 14:19:55)

  • How to find the hardware serial number of iPhone apart from seeing inside the settings of the handset?

    Could anyone help with identifying my iPhone hardware serial number as I'm stuck with connecting the phone to iTunes which is being restored from blank screen?
    Thank you.

    iPhone: Locating the serial number, IMEI, ICCID, or MEID

  • How to create the automatic serial Number through DIAPI

    Dear All,
          i Tried to do the Inventory Transaction through DIAPI with Automatic Serial Number creation ,its working fine but i have problem when i  choose another warehouse.Let me give an Example i have three ware house called W01,W02,W03 for the first ware house W01 i can  automatically create the serail from 1 to 100, the moment when i choose the second ware house (i.e.,) W02 my serial number should start from 1..  any one can help me this regards
    Thanks in advance
    G.shankar Ganesh

    Dear G.shankar Ganesh,
    The serial number is unique in all warehouse in B1 system. It means if one item has serial number '1', then
    you can not add the serial number '1' for all warehouse.
    The DIAPI implements same logic as B1 application so it can not implement in DIAPI also.
    Best Regards
    Jane Jing

  • How to get a new serial number / unlock code - I have lost mine

    Hi there,
    I recently dug out my Logic 8 box to find that I've lost the piece of paper with all my details of the unlock code etc. Does anyone know who you email in order to prove that you bought your copy of Logic and get sent a new set of codes?
    Any advice you could offer would be fantastic as I'm really keen to reinstal Logic and start making music again.
    Many thanks,
    Max

    http://discussions.apple.com/thread.jspa?messageID=11517073&#11517073

Maybe you are looking for