Back order calculation
Hi experts please help me
here back order calculation is 10 4000-36 = 3964
10 3964-276= 3688
10 3688-700= 2988
20 7000-1000= 6000
20 6000-1200 = 4800
here is the table and back order is my output... how to achieve this..
plant
order
shipped
back order
10
4000
36
3964
10
4000
276
3688
10
4000
700
2988
20
7000
1000
6000
20
7000
1200
4800
20
7000
1400
3600
Hi Russel, try this
whileprintingrecords;
numbervar backord;
if onFirstRecord then
backord := {order_field} - {shipped_field}
else
if {Plant} <> previous({Plant}) then
backord := {order_field} - {shipped_field}
else
backord := backord - {shipped_field}
Replace {Plant} with your actual database field for Plant
Thanks,
Raghavendra
Similar Messages
-
Hi All,
We have a requirement for back order report in BW . we are using the extractors V_SSL and VASCL to get this information.
The calculation for backorder and backlog qty are done from V_SSL. But there are few scenarios that we have to manage
1) hard deletion of deliveries
2) one schedule line with multiple deliveries
3) merging data from V_SSL & VASCL ... we tried merging at DSO level but due to difference in keys of DSO the change log update sequence messes the reocrd status
4) GBSTA appended in VASCL gives wrong value for status
Could anyone help by explaining staging for such a report if done in their system ?
Thanks ..would appreciate your help greatly !
Regards,
VNHi vidya
For hard deletion of entries are you planning to drop and reload daily ?
Since you have multiple delivery at one scheudle line , V_SSL and VASCL cant be combined.
Put load date ( which will be sydatum ) in both the DSO. Create customer extractor in BI to combine these two data sources and generate delta on load date.
Thanks,
Monika -
How to find Requisition number of a closed Back-to-back Order
For a closed back-to-back order line how to find the requisition number?
Tried using the "Requisition Summary" form --> Related Documents(Tab) --> providing the Sales order number.
But the LOV attached to sales order does not contain the B2B sales order number.
Hence not able to find the corresponding requisition.
Regards
Edited by: 839781 on Dec 1, 2011 2:25 AMAre sure it was a B2B sales order?
Does the item placed in the order is ATO enabled?
I can find the requistion of the closed B2B order line from the requistions summary window
only order line is closed..header is still open for me
Thanks
Mahendra -
Open sales order and back orders
hi ,
what is the difference between open sales order and back orders?
thanks
ganeshHi Ram,
A open sales order is the one which is not yet delivered that means u have only created a sales order and saved it( create a sales order, save it and see the document flow, the order shows as open)
Back order is also an order which is not completely fulfilled. may be because of the target quantity or because of not meeting the requested delivery date.
in this case you will pull back the required quantity from other sales order(open sales orders) this is done using T.Code CO06.
cheers,
anil. -
Credit Management: How to include back orders value in credit exposure?
Hello,
We have to have credit management implemented for some sales order types.
Credit exposure is working fine with normal sales orders.
But credit exposure is not taking into consideration the value of backorders which are present prior to credit management was implemented (with horizon period of 2 months).
Please let me know how we can include the value of back orders in credit exposure?
Thanks in advance for your answer.
Mallikhi
goto OVAD
assign delivery type with dly credit group 02, GI credit group 03. s ave
goto OVAk
assing order type with check credit D credit group 01
goto OVA8 double click on relevant credit control
field Oldest open item select it, then Days oldest item assign value
regards
[email protected] -
How to get the back order quantity for sales Order
Hi Friends,
I want to get the back order quantity for sales order . in MD04 t-code,
there is a field(MDEZ-MNG01) for Received Qty/ Required qty. But MDEZ is a structure.
I tried from MDTB table, but the table is not updated with the values in MD04.
Please guide me from which table I can get the back order Qty for sales Order
(ref: t-code MD04, MRP element = CusOrd).
Thanks,
Sagar>
VIdya Sagar wrote:
> Hi,
>
> Isn't there any difference b/n Open Sales Order and Back order??
Yes Quite Difference.
Read:
http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm -
Back order line in transact move order form , drived the inventory negative
Hi,
I had problem with transacting some lines in several move orders (it was stuck and giving error each time I tried to transact or delete from view update allocation –> delete line)
In order to cancel these lines to proceed the manufacturing process I back ordered those lines by:
Inventory super user - > move orders - > transact move order - > tools - > back order line
Note that the move orders type was Manufacturing Pick
Now I noticed that this drives the WIP subinv Negative for those items .
So what is the problem and how can I solve it?
Thank you
Edited by: Ahmed.Abbas on Apr 16, 2011 2:39 AMhi,
The problem was in the interface managers (Material transaction , Move transaction ) were inactive , i launched them
Review note 141493.1 in metalink to know how.
I also deleted the pending transactions with errors from mtl_material_transactions_temp and mtl_transaction_lots_temp ( the items were lot control ) .
Thats all :) -
Cross Docking with LE-WM - or - Reactivating Back Orders upon Goods Receipt
I have been reviewing the documentation for Opportunistic and Planned Cross Docking in LE-WM. The requirement is to release Back Orders upon receipt of a shipment to avoid putting them away and picking them right away from the bin. We want to release the Back Orders for picking in the GR area at the time of receipt.
So far it appears that Opportunistic Cross Docking depends on a Transfer Order already existing. The system then cancels the existing TO and replaces it with a TO to pick from the receipt Storage Type.
Planned Cross Docking appears to require an existing Outbound Delivery to the expected Inbound Delivery.
In the case of a Back Order, no Outbound Delivery or Transfer Order exist since there is no stock to release until the goods are received.
Is there a way to release Back Orders to be picked directly from Goods Receipt?
Thanks;
JimThe problem is that all the information I found so far about it is over the process of external goods coming and sending they out without the need of storing in the warehouse. They go directly to the picking area (one step) or in two step process going first from 902 (Good receive from external) to Cross docking Sorage type.and another movement from Cross Docking Storage type to 916 Good issue Storage type.
I need to know if it is possible to implement a solution of Cross Docking for certain number of products having a factory and a warehouse. If so, would you give me a brief process flow?.
Thank You very much.
Al
Edited by: agmogena on Aug 22, 2011 12:01 PM -
Change of Discounton in case of Back order processing
Hi,
We are having specific order type in which if cient unable to supply the stock as per requisted delivery date bu customer- client needs to give more discount.
We are doing back order rescheduling-
we want to new pricing discount for rescheduled order-
is it possible writing a requirement routine for the discount and read it i billing document? based on Requisted date and goods issue date- or any user exist we have to apply?
Thanks
chidambaramHi chidambaram
As per your requirement , if your client is unable to supply the stock as per the request delivery date and if client has to give more discount to the customer and as you are doing backorder rescheduling , then at billing level you can maintain manual discount , because after doing reschuding order only you will be doing delivery and then billing and for that billing document you maintain a additional discount and then you can forward to FI .This may meet your requirement.
Regards
Srinath -
Third-party back order process
Hi,
We created a third party sales order which in turn created the purchase requisition. The requisition is converted to PO and received a partial quantity.
But when I ran the back order processing transactions V_RA or CO06 the sales order is not appearing in any of these reports.
We are unable to activate the "Req/ Assembly" flag in the schedule line item category. Is there any way we can show the backorders for third-paty.
Thanks,
SriniI think that the Third-party process is like a make-to-order process, so you cannot assign/remove availability because it is strictly related to the purchase order created from the sales order.
All you can do is a availability check (even with tcode V_V2) to syncronize the dates maintained in the puchase order back to the schedule lines in the sales orders.
Regards
Roberto Mazzali -
Third party Sales Orders in V.15 Back Order Report
Hi,
Is there any standard setting to incorporate undeliverd third party sales orders in the standard V.15 backorder report.
I need to get the list of third party SOs which are backordered??? similar to drop ship and stock orders (TAB & TAN).As per my knowledge, in standard Third party Sales Orders process,
-On availability check.
-there is no GI.
-no movement type.
-TAS - I Cat - is not relevant for delivery.
The Standard process is
Create Third Party Sales Order (VA01/VA03 - retrieve PR num)* - Create Purchase Order (Display list of PR with ME57 and convert to PO with ME58) - Approval/Release of PO (if required - ME28) - Invoice Verification (MIRO)**
- Billing (VF01/vf04)
The PR number is automatically created in this step.
The incoming invoice from the vendor updates the billing quantity, so that the customer-billing document can only be created after entering the invoice from the vendor.
So, in standard TP sales process, Back order processing is not possisble. If you any other business process scenario, do share with us.
Thanks & Regards
JP -
Vendor Master File - Back order allowed
My client is using ECC 6.0 Retail
We would like to automatically allow or not, back order from certan vendors.
We are using also TM and WM. The Inbound Deliveries are created automatically at night and POs are manually closed by the buyers. If there is a partial receipt by default another I.Del. will be created at night for the remaining quantity. When POs are reviewed after the fact, the inbound deliveries will be deleted, POs be flagged as completed and the case will be closed. However we know that for this particular vendor, he will never shipped backorders. Is there a flag we can use in the Vendor Master File to identify these vendors (no backorder) and prevent the creation of additional Inbound Deliveries?
Thanks
GaetanI would agree however in this case this is more vendor specific than article specific. The same article might be sourced from two different vendors having two different approaches (with or without backorder deliveries).
GD -
Line item is falling into back order even though the stock is available
Hi Gurus,
I have a sales order with a single line item which fell into back order even though there is material stock available in the plant and thereby is not dropping any delivery note.
Please suggest me what could be the reason behind this issue and let me know how can i figure it out of what is causing this issue.
FYI, it is happening for multiple sales order but not for all the orders.
Please help.
Regards,
Praveen Kambala.Hi,
You should check if there are pending requirements in MD04 coming from another sales orders or STO. If your sales order is not available in MD04, either you have daily requirements or the order is probably blocked by credit check.
If you use credit check control and the credit check fails, the quantity will not be confirmed until the sales order is released in VKM4.
If the above does not help, please provide more details about the issue (schedule line type, MRP type etc), as it is stated quite generic now.
Regards,
Marcin -
Hi All,
I want create Value of Back Order per Vendor report, Any body help me,
What are the tables I have to use.
My selection options are :
Vendor and Delivery Date.
Thanks,Hi,
If you are on release 4.7 or newer then you don't need to use the tables.
You can use ME2N with a scope of list that has the ALV flag set on (if there isn't one then create one). With the ALV format this (and simialr) transactions can be used to obtain a lot of different reports.
For example if you run ME2N with a selection parameter of WE101 (open deliveries exist) and a delivery date range in the past, you will get a list of POs that are overdue for delivery. You can click on the delivery schedule icon to see the individual delivery dates.
the ALV format means that you can get these lists in the layout you need and they can even be transferred to excel very easily (try doing that with the non-ALV layout !!)
Steve B -
Hi All,
I want create Value of Back Order per Vendor report, Any body help me,
What are the tables I have to use.
My selection options are :
Vendor and Delivery Date.
Thanks,Hi,
Tables LIKP and LIPS for Delivery and LFA1, LFB1, LFC1 for vendor details.
Restict field LFART (Delivery Type) of table LIKP as Return Deliveries.
Also visit:
http://www.erpgenie.com/abap/tables_mm.htm
http://www.erpgenie.com/abap/tables_sd.htm
http://www.erpgenie.com/abap/tables.htm
Few other useful Tables:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
Regards,
Naveen.
Maybe you are looking for
-
Uable to read imagfile with speacial character in its NAME;from a linux box
Hi, i am facing a problem in reading a image file( file name having special character {G�stehaus}) from Linux file system.[FileNotFoundException] I compiled my code in windows machine and run the same in Linux box. The same file, i am able to read fr
-
Mountain Lion Mail cannot search for non-alpha characters in Subject Lines
Under 10.8.3, Mail 6.3 often cannot successfully find messages if the search string contains a non-alpha character. I have only tested this searching for Subject lines that are KNOWN to contain non-alpha characters Specfic examples: Subject starts wi
-
DSR-500 I cannot change the color saturation
Hi, I have a Sony DSR-500 and I wish to change the color saturation. I read the manual very carefully and it says you must go to the MENU at the page 12. The problem is there is no page 12 !. Pages are from 1 to 9.Do you have a solution to my problem
-
I hope this is the right place to post this but here goes. I am trying to create an array of an object which I have created to store basic details of various people, I have declared the array like this people[] Person = new people[5]; //people is the
-
Cannot combine sales order item into one DN cause LC exchange rate differ
Our users want to combine all items into one DN(delivery notice) to save their effort on packing. But it is not possible because some items were added(modified) into the sales order afterward and resulted in a situation where Exchange rate for letter