Back panel audio jack is not disabled after I plug into the front

The speakers go on playing even with the headphones plugged in on the front panel
I tried all of the combinations of checkmarks in the Realtek HD Audio utility
I got MSI P965 Neo-F
current driver is 1.71, I'm going to update to the latest, but don't think this will remedy the situation
Please help! This is not really disastrous, but I'm so annoyed when something does not work the way it was designed!

Are you trying to suggest I should include detailed computer specs?
Because the moan guide does not list any problems similar to mine
I don't think it will help me get relevant help, but I'll try:
CPU Conroe 6420
Samsung memory 2x1024 DDR2667
XFX GF7600 256 PCIE
Seagate 320Gb SATAII
WinXP Pro SP2
PSU FSP 400 W

Similar Messages

  • Front panel audio jack is not working on K9N Neo V2

    My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date.  Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
    Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

    Quote
    Thanks. Its ironic that disabling it actually enables it.
    It has to day with the front panel audio wiring of your case.  How many wires are there that can be connected to the board's pin header?
    Quote
    Sound quality isn't very good
    Can you be more descriptive?  Is the quality better if you plug the headphone into one of the jack at the back panel?  (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

  • Creative Zen's clock gets reset after being plugged into the w

    I bought the wall recharger for my Creative Zen 8 GB, as I had another MP3 player (SanDisk Sansa e260) die mysteriously after being plugged into the computer's USB port.
    The only complaint I have is that if I leave the Zen plugged in, after it finishes recharging, the screen goes blank and when I unplug it and turn it on, the clock and calendar are reset to their default (March 7, 2008).
    I am on a Vista Home Premium computer (no service pack). I have the latest the firmware on the player and use the latest version of Media Explorer.
    Does this happen to anyone else who uses the wall charger?

    Hello, I read your post & am replying to it because I too am having a clock syncronization issue but mine is not related to plugging it into a wall charger. My date AND time resets too to April 7, 2008 for some reason. I reset it yesterday to the correct date and time for yesterday (May 8, 2008) and now it is reset back to the previous date I mentioned. It couldn't even keep the time/date accurate for 24 hours! My battery was already charged however several days ago and is no where near being finished (it says half full). My firmware version is .2.0.
    Anyhow I know this doesn't help you at all, but at least you're not alone on this issue...mine doesn't originate with charging it though...maybe that will help you at the very least.
    Drew

  • MBP is "Not Charging" but is plugged into the wall..

    Hello
    I have a 2.2ghz MBP purchased February 2007. I just noticed recently a couple things... First the computer would say "Not charging" even though it is plugged into the wall, the LED on the charger would be green. The screen would also lit up more as if it is plugged in and if I remove the connector, it dims as usual. It would still say that "Not Charging." Another thing is the LED does not lit up sometimes in charging, stays colorless. The charger is great condition, no damages to it. The battery on the computer holds a strong charge in the past. What could be the problem? Hardware or software?
    Thanks for viewing! Appreciate any thoughts!
    Mark

    You could always reset the SMC in case that might be a factor. The green light indicates that the power adaptor is not charging--the amber light indicates that the power adaptor is charging. If the battery is over 95% charged, it won't charge unless the charge drops lower. If you run off of the battery for a while, will the power adaptor be amber when you plug it back in and it starts charging?
    As for the LED not lighting up at all when the battery is charging, I have no explanation for that. Possibly the LED itself is burned out or not working properly for some reason. Does the battery still seem to charge normally after it has been discharged a bit?

  • My iphone will not come on unless plugged into the wall charger

    my iphone 4 went completely dead since then i tried chargeing it with a charger bought from sams wholesale which was an aftermarket charger which did not work i then plugged it into the factory wall charger it comes on but says searching for signle i talked to apple support ny telephone and they said i need to restore my phone but unless plugged into the wall the phone will not come on please advise on this

    rustyfromhouma wrote:
    i do not have anything on my phone stored
    If you mean you didn't backup or sync your phone, everything on it will be lost when you get a replacement unless the techs are able to do this.  Apps can be re-downloaded.

  • Audio jack does not work after 10.9.1 update

    Hi folks --
    I have had an issue for a while now that maybe some of you have seen.
    I have a 2011 iMac 27, and upgraded to Mavericks months ago, no issues. For the holidays I bought an AppeTV 3rd gen for the wife, and after setting it up on the network, I can no longer play audio throught the audio out jack on the iMac to powered speakers.
    Now, the issue is, I cannot tell if it stopped working before the AppleTV got added to the mix, or after a Mavericks update. It has been about 3 months...
    The machine is out of warranty, and I have the sneaking suspicion that the audio jack on the motherboard is to blame... but not certian. Has anybody had that issue or seen it be an issue? I consider myself pretty up to date on the Mac support sites like Macintouch and iFixtit, but have not seen anything regrading this issue on this model.
    I have done a deep clean with Onyx, zapped the PRAM, and done a few restarts. No joy.
    Anyone have any wisdom to impart?
    Thanks in advance
    Michael

    Raymond Rogoway wrote:
    Used Software Update to update to 10.5.1. Now my install disk will not boot. Drive kicks out disk after awhile. Ran Disk Warrior which reported no changes. Repair permissions.
    Ray
    Does the disk also get ejected when you are running Leopard, or only when using it for booting?
    Have you looked at it physically for scratches or that dirty film some DVDs had?

  • HT4910 I go to my control panel and it will not allow me to go into the photo options....  The photo box is checked.  What do I do?

    I am trying to archieve and make copies of my photo's from Icloud.  I am working off of my PC that has Windows 7.  When I go to the Control Panel, the photo button is checked but I can not go to the photo options.  How do I get to the options?  What is the easiest way to copy and archieve on my PC?  I am limited on my computer knowledge.... but learning.  Thank you in advance for any and all help!

    What is the block/unblock issue? Is this Firefox's setting that blocks "mixed active content" on secure sites? (Shield icon in the address bar; see [[How does content that isn't secure affect my safety?]])
    Some users with McAfee security software have reported a lot of new problems with the SiteAdvisor add-on. This thread has more information on that issue: [https://support.mozilla.org/questions/988401 How do I turn off McAfee SiteAdvisor ?]
    Regarding slowness, some users are experiencing problems with an update to the graphics rendering technology. This thread has an extensive (and admittedly confusing at times) discussion of what people have been trying: [https://support.mozilla.org/questions/985969 Firefox is unbearably slow after updating to version 27]. If you try anything there, please keep notes on the results in case you need to backtrack or so we can suggest next steps if those things did not help.

  • My iPod does not work properly when plugged into the computer. How to fix?

    I have a 4th generation 40 gigabyte iPod, non-color.
    Today, I plugged it into my computer to update my playlists.
    My iTunes and Windows were lagged down. Eventually, when things caught up, my iTunes didn't show my iPod as being connected. I looked in My Computer, and it didn't say iPod -- it said "Removable Disk". I couldn't disconnect my iPod via Windows, even using the Safely Remove Hardware didn't work.
    After looking around here and trying things like Disk Mode and Resetting the iPod, nothing worked. I can't get the iPod to work with the iPod Updater so I can try restoring it.
    I dunno really what to do. If it's a hardware problem, then I'm not going to bother to get it repaired, since the music that's currently on it plays perfectly fine still.
    I just dunno what else to try.

    you basically are stuck. apple won't do crap for you. i went to the apple store today because my second ipod crashed (the first one they replaced) and they won't do anything for me and told me i had to buy a new one (2 in 1 1/2 years is what happened) so they wanted me to buy a third one when their product obviously *****. and the manager even basically admitted that the ipod that they claim is durable and relible isn't. that people go through 3-4 a year. the supposed "apple genius" told me to send it out to a third party repair. he wouldn't even look at it and lectured me for not getting the extended warranty. if you look at the website below and read you'll find that a lot of people got screwed over like me with the extended warranty;
    http://www.consumeraffairs.com/computers/apple_ipod.html
    put it this way i won't go back to that apple store again or purchase another ipod. ill keep my piece of none working crap

  • Headphones no longer work after being plugged into speaker

    Hi i purchased a ipod touch 5th generation 32 gb bundle from target just over a week ago which came with the iCoustic 20 in 1 Accessory kit Model No : IC184. After plugging the ipod into the supplied speaker this morning trying to listen to music it kept making stacic like noises and changing volume it was alwful to try and listen so gave up and went back to taking it off speaker and playing it back through apple headphones but now after being plugged into the speaker the headphones wont work its just a buzzing sound if you turn the volume up all the way loud the music will come back through headphones then when turning it down it cuts out again or if you manage to get the music it will stop after a couple of seconds. I have done a factory reset but it has made no difference.Please help have a very upset daughter it is frustrating do we take this back for a refund and get a new one if so how do we keep the music and photos etc she has on this one? Thankyou.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

  • My iphone is fully charged but it will not turn on unless plugged into a charger

    my iphone is fully charged but it will not turn on unless plugged into the charger in the wall, it wont even turn on when connected to the computer!!!!!!!

    Hi there. Any luck with your phone? I'm having the same problem

  • My sons iphone will not come on unless plugged into wall charger. even then wont work

    my sons iphone will not come on unless plugged into the wall charger. even then when the screen finally comes on it has the wrong date and just says searching. wont do anything.

    What troubleshooting have you tried? Try a reset, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. If it does not, then you need to try and restore via iTunes. Try connecting the phone to the computer and iTunes and see if it is recognized. If not, you will have to force it into Recovery mode and restore. See this support document for that help. http://support.apple.com/kb/HT1808

  • Confirm on - Scratch-resistant glass, oleophobic coating,Adobe Flash HTML,Radio Stereo FM,Java MIDP emulator,Scratch-resistant glass back panel,Audio/video player and editor,TV Out,Document editor (Word, Excel, PowerPoint, PDF)

    Kindly confirm on the following features of Iphone 4s..and advice me accordingly.
    Confirm on - Scratch-resistant glass, oleophobic coating,Adobe Flash HTML,Radio Stereo FM,Java MIDP emulator,Scratch-resistant glass back panel,Audio/video player and editor,TV Out,Document editor (Word, Excel, PowerPoint, PDF)

    You can easily compare any Nokia devices using the web sites, here is a comparison of the N8 from the Nokia UK site:
    http://www.nokia.co.uk/gb-en/products/compare/?action=productcompareaction&site=64060&products=23301...
    And similar from Nokia Developer:
    http://www.developer.nokia.com/Devices/Device_specifications/Comparison.xhtml?dev=Lumia_800,N8-00
    Some information may be incomplete at present, since some device details were kept secret until the final moment of the launch so the pages have been prepared withoug all of the data.
    Nokia Maps is available for Windows Phone at launch.
    Multi-Touch(TM) is the registered trademark of another company, however Windows Phone does feature the common touch features such as swiping, pinch-zooming and so on.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer

    My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer..please help!!!

    Try recovery mode agian.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?

    My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • After upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?

    after upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?
    before the upgrade, i could open time machine without the need for having the back up disk plugged in.

    Ok. I got it to work, sort of....
    As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
    Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
    I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

Maybe you are looking for