Back panel sound out port is not working COMPAQ SR5060IL

Hi
I have Compaq SR 5060IL PC
Recently i upgraded to windows 7 ultimate from xp
But one problem is that only the sound-out port of the back panel is not working where as mic-in and sound-in port of rear panel are working perfectly..
Before upgrading means in windows xp all ports are working,,,,
pls help

Hi:
You may need to download and install the latest audio driver from Realtek:
Accept the agreement, download and install the first driver on the list and see if that fixes your issue.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul

Similar Messages

Back USB port does not work

I noticed that one USB port(All other ports appear to be working)in the back of my Mac Pro does not work.
Aside from taking my Mac Pro in for a repair, is there any other way to fix this problem?

You can always try resetting PRAM and NVRAM…
http://docs.info.apple.com/article.html?artnum=2238
… and/or the System Management Controller…
http://docs.info.apple.com/article.html?artnum=304123
… otherwise no. You will need to take it in for repair and most likely a logic board replacement.

HT5634 i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?

i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?

Welcome to Apple Support Communities
You have to format your Windows volume and install Windows 7. First, insert the Windows 7 DVD and hold the C key while your computer is starting. Then, follow the steps and, at partitioning step, choose your Windows volume (it's the last volume listed in your display), choose Advanced options, and format it. Then, install Windows.
Finally, after installing it, install the Boot Camp support software > http://support.apple.com/kb/DL1630
Windows 8 is only compatible with some new computers. See > http://support.apple.com/kb/HT5634

IMac firewire port is not working

iMac firewire port is not working
Hi everybody, Happy New Year.
I am a 72 years old semi-newbie in video editing, because Iedit only 1 or may be 2 movies a year since 2007 and I have only very little computer knowledge.
I received a new 27” iMac as a birthday gift 14 months ago. About 10 months ago, with help, I successfully use the Migration Assistant to transfer some datas from my old power G4 to the iMac including two Final Cut Express projects. I had one project successfully done; burned to DVD and I save it with Print To Video. Last week, I have my second project done, I burned the sequences into DVD but unable to do a Print To Videodue to the iMac is not communicating with my Sony camcorders DCR VX1000, this is the same camcorder I used on the last job which was working a couple of months ago.As a result, I try to switch the Easy Setup with different Format and different Use; I refresh the Canvas window; I did a Mix down; move the Screen Saver to NEVER as well as the Energy Saver set to NEVER SLEEP. I also trashed the preferences (plist) folders; run the Utility repair, I replaced the firewire cable (4 pines – 9 pines 800), but nothing work. Up to this point, I think that there is no signal from the firewire port to the camcorder because I understand when the sequences is ready, the firewire is connected between the computer and the recording camcorder, the Print to Video is activated, then the word DV- IN should be seen on the recording deck screen. This time, I don’tread such words on the recording screen. Therefore, I think there’s no out going signal from the iMac to the recording camcorder and the iMac is not receiving signal from the recording camcorder. At this point, I try to connect my iMac to the power G4 to see if I can do some data transfer. Follow the procedures, I hook up the data transfer cable between the G4 and the iMac, I can the fireswire icon moving on the G4 screen but no indication on the iMac screen (there should be some indications in the source bar), this shows me the iMac did not recognize the G4 which worked on previous data transfer. It looks to me the firewire port on my iMac is dead. What has gone wrong? Could I accidentally disabled the firewire port by some magic keystroke? (i.e. accidentally fat finger some thing to make it stop working? Oh, by the way, during the playing around, went to the Final Cut tool bar, I click the View >Video Out > Digital Cinema Desktop Preview – Main, the result was a black screen and the esc key was my rescuer - LUCKY LUCKY! Are there any other trouble-shooting techniques to apply before bringing to shop? Please help!
Sorry for such a long statement, forgive me for unable to make it shorter. Thank you for your patience. Thanks to all the folks in this board for being so helpful.
p.s.

Not sounding good.
If the system Profiler does not see it then there is a basic communication problem between camera and the Mac.
I'm thinking the Firewire port is the culprit as some 800 ports were faulty.
I'd suggest taking the Mac, cable and camera to your nearest Authorized Apple Service Centre and get them to diagnose the issue. eg. let them try to connect the two devices.
Right (control)click the Sequence icon in the Browser and select Item Properties, do the same for a clip.
You can also post screen shots for the Properties.
Al

USB Port does not work W510

Hello all,
I am writing to you hoping that one of you may have an idea what's wrong with my beloved w510.
A few hours ago the usb port (on the back on the right side) where I plugged in my external mouse stopped working.
In the Lenovo part list it is referred to as "usb Sub card yellow".
It just does not recognize a mouse nor any usb stick or external drive. I have already reinstalled the usb controller
but it didn't make any difference. (I think the driver is only for the usb 3 hub on the left side of the notebook)
when I plug in the external drive the lights of the drive start "flashing" same for the usb stick, but they are not recognized as drives..Same for the mouse. The lights go on, but nothing else works.
Probably its all my fault, but I don't know what else I can try! Please excuse my bad English...!
Hoping that somebody might be able to help me...
Paul

I have a reproducible test for this issue on my W510.
1) Plug in a usb mouse into the rear usb port and ensure the mouse is working.
2) Hybernate the system.
3) Resume the system.
4) Confirmed the mouse does not work.
5) Disconnect and attach the mouse to one of the left usb ports and confirm the mouse works.
6) Disconnect and attach to the rear usb port and confirm the mouse does NOT work.
7) Restart the system and confirm the mouse still does NOT work.
8) Shut down the computer (a full shutdown, not standby or hybernate).
9) Power the system back on.
10) Confirm the mouse is now working in the rear port.
I can do these steps over and over with the same results regardless of whether the AC adapter is plugged in or not. It appears that the data connection does not work after the system is resumed from a sleeping state. I have the latest UltraNav driver and utility and the latest power management updates.
Oh, and one more test. Hybernate the system with nothing plugged in, then plug in a mouse into the rear usb port when the system is presently hybernated and then power the system back on. The mouse will not work and rebooting doesn't correct it. Only a full shutdown fixes it.

USB ports does not work

Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS)

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

MY EXTERNAL SPEAKER PORT IS NOT WORKING for hp envy

MY EXTERNAL SPEAKER PORT IS NOT WORKING .WHEN I CONNECTED TO A EXTERNAL SPEAKER ,THERE WERE NO SOUND AUDIBLE.SO WHEN I DISCONNECTED THE CABLE FROM PORT,I WAS ABLE TO HEAR WITH THE IN BUILT SPEAKERS.EXTERNAL SPEAKER IS I GOOD CONDITION.I CHEKED WITH MY HEAD SET ALSO.IT WAS NOT AUDIBLE.MY LAP IS HP ENVY .KINDLY HELP

Hi ano87, welcome to the HP Forums. What is the model or product number? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

After installation, the mobo LAN port is not working? urgent, help ple

I just installed archlinux on my new i7 860 Asus p7p55d-e Deluxe build, but after the installation the LAN port is not working anymore. Before this, this Lan port works perfect in windows as well as in the arch installation. But after the installation, the led is orange and is blinking slowly, windows complains that the cable is not properly plugged, and even arch installation can't pull DHCP from it also.
Luckily, the mobo has another lan port, so I have to plug the cable out and to the second port, but I couldn't seem to be able to find anyway to enable the first Lan port anymore?
Have you seen anything like this, what possibly is the reason?
Thanks, any help will be appreciated.

heleos, thanks for the reply, the first thing I check is BIOS. There is definitely nothing wrong with that, since I loaded the default one.
It is really strange, it seems no matter what I do, the 1st port which used to work, simple doesn't work, but the second one works fine.
But after some poking around with the "ethtool", it starts to work again. I have no idea what cause the disfunction and what magically heal it again.
Now I am really curious.
Last edited by mark.altern (2010-04-18 09:52:09)

T420 USB Ports do not work after installing XP

Hello my office has been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it. The issue we are having is that the uSB ports do not work. I have tried every driver I can find but still no luck, can anyone help?

hey chris0277,
could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

My Air port is not working the wifi - just an amber light blinking. What's going on ?

My air port is not working the wifi - just an amber light blinking. What's going on ?

Sorry it is just not enough info to be able to figure it out.
Do a full factory reset and start over.. that is the best way out of the hole.
Using ethernet is far far superior to using wireless at least for setup.
Using iOS device with airport utility is better than using wireless via a Mac with airport utility if you have MBA or MBPr.. but it is still better to buy a usb or thunderbolt to ethernet dongle so you have actual real connection and not a vapourous one.

Audio out port doesn't work well

Hi, I have a Macbook Pro 13-inch, Early 2011. Since I bought it I always use my Mac whit headphones, but since a month it only works well the left headphone. I think that the problem it was my headphones but no, because I used it on my phone and workes well. So i come to the conclusion that the audio out port doesn't work well. What you think? And what you recommend to me to fix this problem?

Probably still under warranty, but not for long. Take it to the Apple Store or AASP to have it checked ASAP.

My sounds and audio is not working. it's not in mute. help please

i need help. my sounds and audio is not working. but it's not in mute button.

Hi,
Can you post back with the following details.
1. The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Time Capsule Internet WAN port is not working, what can I do to set it up?

When I plug the ethernet cable from my router to my Time Capsule it should turn on a green light in the back of the TC, but this light is not turning it on anymore, and this port is not working, how can I set it up?
I want to create a wireless network with the TC, but if this port (Ethernet WAN port) doesn't work, I can't, or can I? How?
Then I want to use my 2 Airport Express to use the network that I want to create.
I hope you can help me, thanks a lot.

what model is the TC? A1xxx from the base please.
How old and is the front LED otherwise showing it is operating OK?
What is the network setup..? Is the TC bridged or router.. or is it in Join wireless network mode now..
If the later.. the ethernet ports are turned off.. you need to do a factory reset of the TC.
Factory reset.. Hold in reset button.. THEN power on the TC.. keep holding in reset for about 10sec until the front LED flashes rapidly.. there is a good chance the ethernet will work now.

My macbook is back from repairs. It is not working with my apple led cinema display. It was working prior to the repairs on the laptop. Is there a setting I don't know about that might have been changed?

My macbook pro is just back from repairs. It is not working with my apple led cinema display. I have followed the directions in the cinema display manual. am I missing something?

Take a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate. Displays will probably try to put the panel for the ACD on the ACD where you won't see it. So click "Gather Windows" to get the ACD panel on to your macbook.
One more thing, make sure you fully seated the mini displayport plug. They can be sneaky little devils in that they need to be fully pushed in.

Back panel sound out port is not working COMPAQ SR5060IL

Similar Messages

Maybe you are looking for