Back to back printing for booklets

I am trying to print out a 40 page booklet, which i have made inDesign CS3. when i've eventually worked out how to get it to print out back to back, the crop marks don't line up on the back, is there anyway to make the settings the same for front and back printing. I have to manually feed my printer.

Chances are slim to none getting a book on a laser printer or copier to back up correctly with crops. Trial and error thing. You may want to sent the odd pages first, them flip the pile and nudge everything however much it's off.

Similar Messages

Help required : Back to back printing for line items.......

I have a critical requirement:
Mulitple Handling units are to be printed, with every new handling unit to be printed on a new page and if the line items for a particular handling unit exceeds the page then it should be printed back to back.... PLease help it very urgent. points will be rewarded.....

go to basic settings an select print mode as "D" means duplex printing..now you will get back top back printing.

Urgent - Not able to Print back page for Last Page in SAP Script.

Hello All,
I need to Print back page in SAP Script, I am able to do it by setting print mode as D, but now the problem is, it does not print back page for last page.
For eg. if there are 3 pages it prints back page for first two. If there is only one page then it does not print back page.
Please Help.
Thanks.

hi,
Yes, we can print logo as water mark in scripts
Just do as like this....
Upload your logo via SE78.
- Select 'Import' button from application toolbar of SE78, and perform upload.
and write this code in scripts
BITMAP 'COMPANY_LOGO' OBJECT GRAPHICS ID BMAP TYPE BCOL
regards
Sankar

How do I set a noise print for the entire track? (Back to Basics)

Ok. I've only worked in STP with single audio clips. Now, I'm trying to adjust audio inside a Multi-Track project sent from FCP... and it's a little different. At least to a guy like me.
I'm struggling with the most basic issue, and that's possibly why I can't find an answer to it.
Simply, "How do I go about setting a noise print for an entire track?" I've done this for a single audio clip, but now that I'm in a slightly different environment my old ways don't work. I've looked through video tutorials hoping to find something but no luck.
Any help is greatly appreciated!
JS

With the audio opened in SoundTrack Pro, select (highlight) a small portion that only contains the noise that you want to reduce. Sample that section. then select the entire audio clip and use the Noise Reduction tools to reduce the noise that you sampled earlier.
-DH

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Petition to bring back "Print PDF" to InDesign

Would anyone else like to join a petition for bringing back "Print PDF" as an option in the InDesign Print menu?
I am on CS4 and my colleagues are on CS5 and they have no end of problems getting their PDFs the way they want them from the command near the Export options under FILE.
We work at a printers and in the end my colleagues come to me with CS4 to get the print ready files through to our RIP for making plates for litho printing.
The vital parts that are missing for CS5 is the option to choose the sheet size of the PDF and much more precise management of the colours and DPI/LPI.
We can't afford the latest kit for everything or to upgrade everything just because InDesign CS5 has lost a bit of functionality. I don't know what I'll do when it comes to my turn to upgrade and I know that there will be consequences for how we get our InDesign files through for printing. One big headache.
Why oh why oh why did Adobe decide to take this extra functionality away?

On behalf of Adobe:
I assume you are referring to InDesign running on under MacOS.
(1)     Adobe never “took away” any ability to produce PDF via distillation of PostScript. In what was described by Apple as a security enhancement, Apple themselves disabled the ability of Adobe Acrobat to have an automated “print to Distiller” capability via the Adobe PDF PostScript printer driver instance on the Macintosh (this feature remains available under Windows). If you are going to complain to anyone, complain to Apple. This has nothing to do with a particular version of either InDesign or the Creative Suite, but rather, MacOS version.
(2)     You still can conceivably produce PDF via distillation of PostScript by producing a PostScript file and then either manually distilling it or using the “watched folder” capability to automate the process of distilling PostScript into PDF.
A “petition” isn't going to change anything in this regards.
However, even though production of PDF via distillation of PostScript is still available, albeit not quite as convenient, we would wonder why you believe that you need to produce PDF in that manner?
PostScript generated by InDesign is not optimized for creation of PDF, but rather for printing directly to a PostScript device. It is highly device dependent with no support of color management and live transparency. It is created for a specific page size, a specific device resolution, and a specific color space. The fonts are embedded in the PostScript file in a manner that is not conducive for high reliability PDF creation.
Adobe most strongly recommends that all PDF creation from InDesign be performed by the Export function in which PDF is directly generated from the InDesign document without any PostScript intermediary. This provides the ability to produce highly optimized, device independent PDF with full color management, live transparency, searchability, etc.
You state that the vital parts that are missing for CS5 is the option to choose the sheet size of the PDF and much more precise management of the colours and DPI/LPI. Sorry, but that doesn't make sense at all.
Regardless of the “page size” chosen for your InDesign document, you can effectively choose a different (larger, but not smaller, obviously) page size for the exported PDF by judicious use of the bleed and slug areas either as defined originally for the document or as overrides at PDF export.
In terms of color management, PDF export fully supports ICC color management and by selecting appropriate export joboptions (such as PDF/X-4), you can fully manage all colors (RGB, CMYK, LAB, and spot colors) through the rest of your workflow.
I am not quite sure what you mean by precise management of DPI/LPI, but neither for composite PostScript (which is what you would distill to get a composite color PDF file) nor for PDF export does InDesign support direct specification of screening parameters (what I assume you mean for DPI/LPI). If you print separations directly from InDesign to a PostScript device, yes, the InDesign Output Print dialog allows you to specify generic (not on an image by image basis) frequency and angle for each of the separations which results as setpagedevice parameters in the PostScript file (and subsequently ignored by the Distiller). And if in fact you are creating pre-separated PDF, you are really using a non-supported, strongly not-recommended workflow.
Assuming that you are using a composite color PDF workflow, separation colorant line frequency and angles is normally handled automatically by any modern-day RIP. If you are sending your PDF files directly to a RIP, this separation colorant line frequency and angle information is normally either set via JDF commands or via the RIP's operator console and/or job submission system and is not somehow extracted from the PDF file itself. Many RIPs totally ignore such information, especially if they use FM or proprietary screening techniques.
          - Dov

Canon iR2022i driver & front-back print

Dear Apple fans,
I've a problem with Canon iR2022i in my office, problems are driver and front back print.
I donwnloaded this driver: Mac_UFRII_Ver1020_04 from Australian Canon support website.
I add a Canon in systems preferences with IP but I can't print front & back, button is not active...
This features is important for print document in office.
Anybody could help me?
Thank you so much.

Hi,
Give the Print Mode as 'D' in the Pages to get printed on either side
Please check these links too
http://help.sap.com/saphelp_nw04/helpdata/en/90/78f07e030211d399b90000e83dd9fc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d1/802e77454211d189710000e8322d00/frameset.htm
Regards
Sudhe

Time Machine is "Stopping back-up" for days, what do I do?

Hello,
I have a Mac OS X Version 10.6.8, 4gb Mac book pro, and I'm trying to make the first back-up for days. I have a Wi-fi Router D-Link DIR 615 in my living room and I wanted to use the time capsule to expand the signal so it could reach my bed-room. But first I've been trying to make the back up without success.
I have a Ethernet cabe conected between my computer and the time capsule, and I have a usb cabe conecting the time capsule and the printer. Since I wanted the back-up to be done wirelessly, I didn't connect the modem cabe to the time machine, because it is already connected to the Router.
The problem right now with Time Machine is because it is stuck "stopping back-up" for days. I've turned time machine OFF, and it is still stuck, and I've turned Time Capsule OFF, and rebooted it, but it is still stuck "stopping back up."
I saw in onother conversation talking about SYSLOGED, and how I'm supposed to "open terminal" and write some stuff there:
http://www.macworld.com/article/1146737/exittimemachine.html
Is this link saying the right answer to my problem? And how do I "Open Terminal"?
Tks a lot!
Adriana Naccache

Time Machine Editor.
Clinton

I'm searching for a back cover for my iPhone 3GS 16GB..

I'm searching for a good back cover for my iPhone 3GS 16GB in white because my old is destroid
Where can I find a good one? It shouldn't be too expensive!
Lena

Darkweb wrote:
in the Knock Knock protocol is used the console by System.out.print ext ext for the answers of server,i want the server and the client to communicate without the knowledge of the user...such:
client says: hi
the server reads and says: hi client
the client reads and says: 123
the server reads and says: 456
without console...You can't work out how to adapt that sample code? So what are you going to do for the rest of your coding career? Look for "sample code" for everything? You need to be able to adapt what you've seen so far, it's the only way

No back printing options

My company uses a Noritsu mini lab for much of our printing and lightroom is great for printing a single picture here and there and for batching printing a whole folder. But since lightroom sends each file to the printer unnamed the back printing just says lightr instead of the filename.
Does any one know a possible solution? I'd really like to keep using it..

If you have some workflow software for your Noritsu that supports hotfolders you could setup your back printing there and export a batch of files to the hotfolder.

I just got my new i phone 5 s and did all the syncing and backing up for my old iphone 4s and set my 5 up and synced it on itunes it synced evrything but the contacts and othe minior things were the only things that really transfered my apps and all my

I just got my new i phone 5 s and did all the syncing and backing up for my old iphone 4s and set my 5 up and synced it on itunes. It synced evrything but the contacts and other minor things. those were the only things that really transfered. My apps and all my music did not. Tthe thing is when i just went to go manually start dowmloading a few of the songs that i knew i already bought , itunes is making me pay forthem again. Its not saying instal like it usuall does when you go download something aleady purchased on your itunes account. I think or thought it might have something to do with the fact that i just changed my apple id name right before i got my new phine but my apps all re-downloaded (manually-no syncing) without making me pay for them again. i dont want to have to purchase allllll my songs again. Can someone please help me!! Itried going back to my old id or signing out of this id and signing in as my old apple id but now it wot even get on that oneits likjeit doesnt exist anymore.. And when i plug my old phone it shows in the itunes everything thats supposed to be there but all that doesnt stay in the itunes when i actually un plug it so when i plug my 5 in to my computer none of the stuff is in the store for me to actually transfer it I am so good with technology and this has me stumped please help

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

Where can I get a replacement back housing for my iphone 5c?

Where can I find a replacement back housing for my iPhone 5c because I recently bought the white one and get dirty way too fast and it starting to look really ugly and the dirt marks are starting to stick to the phone and not come off.

Check with Apple. Google online for a 3rd party repair service.

Hi I have an Ipad 3 (new ipad) and it wont let me open up the screen, it just comes up with'this machine hasnt been backed up for so many weeks, when you press ok, it just stays there and cant do anything else ???

I Have an Ipad 3 and it wont let me open the screen,it just comes up with 'This machine has not been backed up for so many weeks' and when you prsss ok nothing happens, its just locked out ,. Any Ideas ??

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Automatically log back in for a given period of time

I just started to work on web and have the following issue:
We want some (mobile) users to be able to automatically log back in for a given period of time. It is not difficult to set cookie (valid user information without clear text) on the mobile device. For now the question is how we can log in using this cookie info.
Web application uses "j_security_check", "j_security_check" checks the user/password.
Question is how we can autologin using cookie information. Thanks guys!

it is not problem to check cookie on exists and valid. Problem is 'where' where can I do it using 'j_security_check'

Back to back printing for booklets

Similar Messages

Maybe you are looking for