Back to basics. IP Route

I have a 1721 With a 100 BaseT ( Fastethernet0(192.168.0.254)) and a 10 baseT (WIC1ENET Ethernet 0(192.168.1.254)). I am trying to get the router to route traffic from 1 port to the other. I have a ADSL Router (192.168.0.1) the other side of the 1721, I just want it to route internet traffic to me and vice-versa. I have add ed the route, removed it tried adding a default route. I suspect it may be a command that I have missed. I have made sure the Ehternet I/f's are up and addes ip routing.
Any suggestions.

"internet traffic"... hmm.. I don't see any mention of NAT anywhere. If you are hoping for the ADSL router to translate a subnet other than 192.168.0.0/24, you may be in for a treat.
Most /if not all/ SOHO devices only allow you to NAT their current internal subnet.
You can test if routing is indeed working by pinging from the 1721 to the ADSL router by sourcing from the 192.168.1.254 interface or just place a device on that subnet and ping the 192.168.0.1 - that's as far is going to go without NAT'ng. Ah, you will also need a route from the ADSL router to the 192.168.1.0/24 network via 192.168.0.254 interface.
HTH,
Edison.

Similar Messages

Converted to Dynamic disc in error - how can I get it back to basic?

I have created a system image onto a external HDD
I have not yet created a system repair disc as I understand this can only be done once and I didn't want to do it at the wrong time
Can I format the HDD back to basic then copy the disc image, or won't this work as the disc image is of a dynamic disc?
If I create a system repair disc of the dynamic HDD will I be able to use it if I take the HDD back to basic?
Thanks
(kicking myself for clicking on the wrong box to convert to dynamic!!)

See this article, be sure your data is backed up First. See #2 if is still bootable, #3 if it is Not bootable
http://mypkb.wordpress.com/2007/03/28/how-to-non-destructively-convert-dynamic-disks-to-basic-disks/

I was checking email & noticed a choice: You're in "Basic". Want to go to "Standard"? I chose "Standard" but want to go back to "Basic"? How?

I was under the impression that "Standard" was faster than "Basic" and had no idea I was in "Basic" so, when I saw the choice, I picked "Standard", but it has changed my email format so much that I'm not comfortable with it. I don't know how to get back to "Basic".

The Apple iPhone uses a different voicemail system then the rest of the Verizon Wireless network. The only option is a visual voicemail. You can pick a standard greeting. Although I don't know if you are able to choose a standard greetings after creating a personal greeting.

Reverting from advanced audit policies back to basic

Hey,
I'm trying to revert back to basic audit policies after using advanced polies. The policy is set locally on the DC server 2012. I've tried doing this:
http://support.microsoft.com/kb/921468. There are no advanced polices set. When I set the basic policies they are good until the next gupdate, then they revert "no configured"
So what ever reason my firewall can only pull signed on users from the basic audit policies and not advanced. Any idea how to revert this?

Ok, so I got it figured out.
For anyone else to reference:
http://technet.microsoft.com/en-us/library/ff182311(v=ws.10).aspx
In this document they mention:
How can I roll back security audit policy from Advanced Audit Policy to basic audit policy?
Applying advanced audit policy settings replaces any comparable basic security audit policy settings. If you subsequently change the advanced audit policy setting to Not configured, you will need to complete the following steps to restore the original
basic security audit policy settings:
Set all Advanced Audit Policy sub-categories to Not configured.
Delete all audit.csv files from the %SYSVOL% folder on the domain controller.
Reconfigure and apply the basic audit policy settings.
Unless you complete all of these steps, the basic audit policy settings will not be restored.
But my issue was a local policy and not in sysvol. I found 2 file locations.
C:\Windows\security\audit\audit.csv
C:\Windows\System32\GroupPolicy\Machine\Microsoft\Windows NT\Audit\audit.csv
Once I renamed those files. Then I could use basic audit policies again.

Basic Default Route Question

Hi,
I have a very basic question I wanted to run by everyone to make sure my understanding is correct.
Setup:
Basic config, router with two interfaces and a single default route.
hostname RTR1
interface Ethernet0/0
ip address 1.1.1.1 255.255.255.0
interface Ethernet0/1
ip address 1.1.2.1 255.255.255.0
ip route 0.0.0.0 0.0.0.0 1.1.2.2
add -> ip route 0.0.0.0 0.0.0.0 10.10.10.1
If I add a default route (currently in a telnet session coming through 1.1.2.2 to get to RTR1) to a gateway that is NOT locally connected nothing will happen, correct? The router won't try to load balance my traffic since the second gateway is not directly connected and reachable, correct?
Next, if I change the IP address on e0/1 to 10.10.10.2/24 then my default route of 1.1.2.2 will no longer be used and my 10.10.10.1 defaut route will become active, correct?
I can then connect using my new IP of 10.10.10.2 assuming all routing is working on my new default gateway, correct?
Basically, I'm making sure my understanding of the default gateway route not being used unless it is accessible is valid. If it is, it will load balance traffic across up to 6 of them.
Please comment or correct if my understanding is incorrect.
Thanks.

Jamie
I believe that most of your understanding is ok especially about not load sharing over the routes as defined. I checked it on a router and only the default route with a reachable next hop is inserted into the routing table. Both static default routes are in the config but only one is in the routing table.
HTH
Rick

I downloaded Macfee security and parental control. The settings have gone back to basic settings but if I try to customise the toolbar by add the "home" icon or adding "contact" to bookmarks until I close and when I open they are gone. Any ideas

I downloaded Macfee security and parental control. The settings have gone back to basic settings but if I try to customise the toolbar by add the "home" icon or adding "contact" to bookmarks until I close and when I open they are gone. Any ideas

Make that four.
If you have any commercially advertised/available antivirus software installed on your Mac, completely uninstall this per the instructions on the AV developer's website.
Antivirus software can slow down the normal operation of OS X and can negatively affect OS X performance and operation.
Do you have apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac or anything like these apps, installed on your Mac? These types of apps, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
Plus, these type of apps aren't really necessary. They really aren't.
There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac.
Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
It is best to never, EVER download and install these types of apps.
The risk to your system and data is too great a risk!
Search the web to learn how to correctly and properly uninstall these kinds of apps.
They all uninstall differently.

Back flush through the router

Is there a report I can run that will find materials not marked for back flush in the router? We happened upon one because it was a large order and the final back flush was off by a significant amount. What concerns me is if there are others but the orders are small and so the back flush error is insignifacant.
mary

Hi...
try this:
Hard wire your pc to router...If you are now connected to the router then access the Routers page, how to access UI/routers page? :
* launch Internet Explorer
* clear everything in the address bar then type 192.168.1.1
* if you will be prompted by username and password, then leave the username blank then type admin for the password (note: if you didn't change the password of the router)
*if you are now in the UI page, you will get the info. you need in the "Wireless" tab..
Just helping...
Tell me if it works..
Gobless..

Post Moved Back-to-basics

Moved http://community.bt.com/t5/BT-Infinity/Back-to-basics/td-p/695936
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Hi Sri,
Before Release 4.0A, ABAP stored the content of internal tables in a combination of main memory and file space. This means that the maximum size of all internal tables of all programs running on such an application server at one time is about 2 GB. With Release 4.0A or greater, this size decreases to about 500 MB. (Note that those values aren't fixed, but this is a good guide. This minimum of 500 MB is the lowest limit of the real value, which varies among different operating systems and even among different releases of the same operating system.)
It may sound strange that a newer release has a higher restriction on capacity. But it's a consequence of the fact that the contents of internal tables move from a reserved file to shared memory. When you process internal tables this way in Release 4.0A or greater, you pay for much better performance with a smaller potential size.
Captured in the 2-GB trap of a 32-bit operating system, you have to redesign your program in a way that the complete data is split into different logical parts that each, on its own, can be processed by ABAP.
http://www.sapinsideronline.com/archive/volume_01_(2000)/issue_01_(june)/v1i1a12.cfm?session=
Regards,
Vinay

Bring back Visual Basic 6.0 ! We all need it.

Please reconsider introducing VB6 to the market. It is needed by many.

Hi Reed,
Thanks for your two posts. Let me try to reply.
Discussion or Argument ?
You say "these forums are for discussions not arguments", and suggest that I want an "argument" or I am "trolling".
Yes they are for discussions and no it isn't the case that I want an argument (or that I am trolling). I am trying to have a reasoned discussion following the opening poster's genuine request to "Please reconsider introducing VB6 to the market. It is needed
by many."
I don't consider you treated him fairly. You have some sort of administrative status on this forum, implicit in that is that you should treat all posters equally and fairly. Yet your first post was "Bring back Windows 3.11, we need it. ......VB6 should
be retired and forgotten." That post alone was unfair to the OP and it set the tone for other posts that followed.
In other posts you refer to "VB6 zealots" but never criticize those who oppose the return of VB6 even when they accuse posters of being someone else. (I'm not making a plea for more banning and more censorship, I'm asking that everyone be treated
equally).
You also say "At the end of the day it is a fool's errand to argue with fools, so there's little sense to continuing the 'discussion'". Hardly fair and equal treatment, and certainly not an encouragement of discussion rather than argument.
You also state "If this thread were meant to take itself seriously, it would have a title which was not so obviously false, and it would contain some content with a reasonable argument." Again, the opening post was clearly a genuine call. You may
not agree with it but that is no reason to call it 'obviously false'.
Also the opening post doesn't even refer to VB.NET, it certainly doesn't suggest that VB6 should replace VB.NET - it is others who bring VB.NET into the argument. (And yet you move it to 'Off-topic posts' on the grounds it is not VB.Net related).
Let me state I am putting this forward as my genuine opinion of your actions, I am not attempting to 'troll', 'flame' or to attack you personally.
Valid arguments for VB6
You say Cor has clearly demonstrated there are no valid arguments for keeping VB6 around. Not so.
First of all the OP says "it is needed by many". Why should your and Cor's opinion be any more important than the OP's ?
Here are some reasons it is needed (I limit myself to just 5 otherwise this post will be huge):
1) VB6 is still widely used. According to the TIOBE index it is the #7 most popular programming language - an amazing feat for a language last updated 16 years ago. Particularly as Microsoft (& others) have spent 12 years trying to kill
it off. You may not like it, but there it is.
2) There are still a huge number of legacy VB6 applications in use, especially in corporates and government. Microsoft have (to their credit) recognized this and offer "it just works" support for the VB6 runtime until at least 2023 (soon to be extended).
But this support is for the runtime, not the IDE.
Microsoft effectively offer 2 options for these VB6 applications
a) If no modifications are required, continue running the VB6 application (presumably Cor disagrees with Microsoft).
b) If modifications are needed, migrate to VB.NET.
But in real life the most likely scenario is that the VB6 application will require a minor modification.
So what do you do ? According to Microsoft you migrate. But if the modification is just to change (for example) some text on a form that would be nonsense. I saw a suggestion a while ago that it cost $1 for every 3 lines of code migrated. So
a medium sized VB6 application could cost say $20,000 to migrate. Clearly that is not an acceptable cost for the minor modification I suggested. (Don't get hung up on actual cost figures, I am just pointing out there are potentially significant
costs involved).
The obvious answer for this scenario is to use VB6 (at a cost of say $20 not $20,000). Yet Microsoft don't offer this, stating that the VB6 IDE is not supported on Windows 7 or 8.
Does anyone disagree that doing minor modifications in VB6 is the only acceptable solution in this scenario? Or are some going to suggest it is better to spend $20,000 than $20 ?
Microsoft have painted themselves into a bit of a corner here, stating that they support unmodified VB6 applications until 2023, but you can't (theoretically) modify them.
For completeness on this point I'll cover some other typical scenarios too:-
One is that the VB6 program needs to become a web application - effectively this is then a re-write not a migrate, so you can decide what language is best to use. It may be, for example, that JavaScript/HTML5 is the way to go. (I've followed this route myself
for some old VB6 apps).
Another is that the VB6 application needs a mobile version. A few years ago that may have been VB.NET for Windows Mobile. (I've done that myself too, great for Windows CE/Windows Mobile 6.x). But doing this today you are really looking at iPhone,iPad
and Android - again you can choose the best approach (native or web app ?) and language.
The final scenario I'll mention is the one Microsoft do cover - migrate your desktop VB6 app to desktop VB.NET. I can't think of any occasion in the last few years where I have found a genuine need to do this. I have certainly seen cases where
IT (or whoever) have decided that VB6 apps must be migrated because VB6 is 'obsolete' (I guess a view not too dissimilar from many in this forum). I've even done a few of these myself (though I had the sense to only do smaller migrations, not wanting
to tie myself up with large scale migrations). I don't think of any of these new applications (done by myself or others) were any better than the ones they replaced, but at least the customers were happy (and paid well).
3) VB6 is the same language as VBA. VBA is a current, Microsoft supported language. It is in Microsoft's flagship product Office 2013. And it is the same language as VB6. You can cut and paste code between VB6 and VBA (and vice-versa). It is the same
language.
Both VB6 and VBA use the Visual Basic Runtime Library. In fact it is more than that, VB6 actually uses VBA to define it's language. In effect the VB6 IDE is a host for VBA in the same way that Word or Excel are hosts.
It is strange that Microsoft support (and sell and extend) the language when it is named VBA but not when it is named VB6.
Microsoft say VBA will be supported for the foreseeable future stating "This means that if you have an existing VBA project that you are satisfied with, you can be confident your investment is safe". Where is the logic in having this for VBA but not VB6
They assure you your VBA investment is safe but won't give the same assurance for your VB6 investment.
(OK, for the more pedantic posters VB6 is the same as VBA6. VBA7 is the latest release and includes a handful of modifications to support 64 bit Windows. Prior to VBA7 the languages were kept identical, it is these same modifications that many
of us now would like to have incorporated into an updated VB6).
4) A suggestion to bring back an improved version of VB6 is the fifth most popular (out of almost 8,000) on the Visual Studio UserVoice site. Vote
for VB6
5) Microsoft's program manager for Visual Studio stated (Channel 9) "It isn't cost effective to keep rewriting code to get back to functional equivalence". Quite so. So why re-write existing VB6 applications ? (Again, Cor presumably disagrees).
General Points
You mention LightSwitch and SmallBasic. A good point. But I'm sure you know neither support VB6 code so it doesn't address the concerns of the OP. But it is nice to see that you aren't opposed to all languages that aren't called 'VB.NET'.
So why the opposition to an updated VB6 ? If you prefer, it could be named LightSwitch 6.1 rather than VB6.1 ? Or maybe SmallBasic 7.0 ? Or if you see VB6 as a threat to VB.NET you could name it VB Junior. As long as it can open and compile VB6
code that's fine by me. Incidentally, there is certainly no call for VB6.1 to be part of "the .Net family".
You say "you want these hard working people to DO MORE WORK so that you can continue to generate income from your ancient endeavors." I'm not sure I see your point here. How is asking for Microsoft to bring back VB6 (together with the modifications
they have already done for VBA7) doing that? I suspect Microsoft could do this for a fraction of the money they have wasted on LightSwitch or SmallBasic. And if it is going to be more work than Microsoft can handle (as if) they should open source
VB6.
You mention that your 8 year old website is 'crap'. Well, that's what happens with websites. But the analogy doesn't really hold for a typical VB6 desktop program. A desktop CRUD program written in VB.NET doesn't really look (or behave) any different
to the same program in VB6.
You ask what I will be doing in 5 years when nobody uses PCs anymore ? Well who knows what the future will bring, but it is likely to be VB6 for those (mainly corporate) users still using desktops and laptops or Windows tablets, JavaScript for
Web apps - including iOS and Android - (I note Microsoft are recommending JavaScript/HTML5), and something (maybe Basic4Android ?) for native Android apps if Android phones and tablets become more acceptable for corporate users. I'll probably
also be migrating my VB.NET apps to JavaScript too.
As things stand, Microsoft have sent a clear message: 'If you are planning to make a substantial investment in developing your software, if your application is mission-critical, if you expect to use it for years to come - don't use Microsoft languages.'
Have Microsoft learnt from this ? The killing of Silverlight would suggest not.

Switching to iphone.. then switching back to basic phone

Ive had an LG enV for years. Im thinking about getting an iphone. Obviously I would need a data plan for my new iphone. Lets say 3 months from now, I dont want to use the iphone and switch back to my basic LG phone.. Can i cancel my data plan i had to get for the iphone? Will I be breaking my 2year agreement contract when I switch back to my LG?

Your two year agreement is for the line of service, not the specific phone or plan you have on the line. You can swap phones (go back to your basic LG) and remove the data plan at any time, as long as the line of service remains active.

Basic Internet Routing Configuration Help -- Cisco 2811

Hi everyone,
I want to start by saying that I brought a Cisco 2811 Router to use at home and to practice advanced networking with. So far, I believe I've configured everything as it should be, however, I am not getting any internet connection.
DHCP is set up and working properly, I can lease addresses without issue.
Both interfaces are configured, fe0/1 with a static IP, and fe0/0 as a DHCP client.
I have connected fe0/0 directly to the Cable modem and it acquires an IP without issue. Connecting my laptop directly into fe0/1 allows my laptop to lease an IP from the router's DHCP server. So I know everything up to there is working properly. I've set up NAT as best I can with what I know, but I am still not getting the router to provide internet access.
The following is my Router's Configuration. Does anything seem to be missing? I used Configuration Professional to set it up.
------------Begin Configuration-------------
Building configuration...
Current configuration : 2570 bytes
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname Network
boot-start-marker
boot-end-marker
security authentication failure rate 10 log
security passwords min-length 6
no logging buffered
logging console critical
enable secret 5 $1$4FJS$RQUEiWuTaMOAGhVx1O1Du0
enable password 7 046F03070C291D175F40
aaa new-model
aaa authentication login local_auth local
aaa session-id common
dot11 syslog
no ip source-route
no ip routing
no ip gratuitous-arps
no ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.100.1
ip dhcp pool Network
import all
network 192.168.100.0 255.255.255.0
dns-server 4.2.2.2 4.2.2.1
lease 7
no ip bootp server
ip domain name Network
ip name-server 4.2.2.2
ip name-server 4.2.2.1
login block-for 5 attempts 5 within 1
multilink bundle-name authenticated
voice-card 0
no dspfarm
username Admin password 7 1526035D5D7C72252B3B
archive
log config
hidekeys
interface FastEthernet0/0
description $ETH-WAN$
ip address dhcp client-id FastEthernet0/0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
no ip route-cache
duplex full
speed auto
no mop enabled
interface FastEthernet0/1
ip address 192.168.100.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
no ip route-cache
duplex full
speed auto
no mop enabled
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat pool Network 192.168.100.1 192.168.100.254 netmask 255.255.255.0
ip nat inside source list 101 interface FastEthernet0/0 overload
logging trap debugging
logging facility local2
access-list 100 permit udp any any eq bootpc
access-list 101 remark INTERNET ACCESS THROUGH NAT
access-list 101 remark CCP_ACL Category=2
access-list 101 permit ip 192.168.100.0 0.0.0.255 any
dialer-list 1 protocol ip permit
snmp-server community public RO
no cdp run
control-plane
banner motd ^C Welcome! ^C
line con 0
login authentication local_auth
transport output telnet
line aux 0
exec-timeout 15 0
login authentication local_auth
transport output telnet
line vty 0 4
password 7 107D0C1A10051B1F15
login authentication local_auth
transport input telnet
scheduler allocate 20000 1000
end
------------------End Configuration-------------------
Does anything seem amiss? Thank you all in advance for your help!
John

Hi Again,
I sent
dhcp pool Network
default-router 192.168.100.1
to the router and wrote it to config. I still didn't have internet access at first, so I followed John's tip and hooked up my machine to an old Catalyst 2849G switch I had laying around. The switch has no settings, just gets an ip from the router and does its own thing. After doing so, I do now have internet access. I'm using it to post this reply in fact.
Here are the results of ipconfig /all on my Ethernet NIC on my machine before even having the switch:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : hsd1.ut.comcast.net.
Description . . . . . . . . . . . : Intel(R) Ethernet Connection I217-LM
Physical Address. . . . . . . . . : 54-EE-75-27-6F-06
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7cdd:83b5:e603:127e%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.100.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, October 02, 2014 7:57:10 AM
Lease Expires . . . . . . . . . . : Thursday, October 09, 2014 7:57:10 AM
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 192.168.100.1
DHCPv6 IAID . . . . . . . . . . . : 290778741
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-B2-3D-AF-54-EE-75-27-6F-06
DNS Servers . . . . . . . . . . . : 75.75.76.76
75.75.75.75
NetBIOS over Tcpip. . . . . . . . : Enabled
It seems everything was working as it should, but I didn't have internet access and windows still reported it as an unknown network.
After hooking up my Switch, Windows reported seeing 'Network' (From my router's host name, I presume?) and once I reset the modem, I had internet access.
This was a huge learning experience and I am glad to have help from all of you. Is there anything else I can to do optimize my configurations? Also, why didn't I have internet access when directed hooked up to FastEthernet0/1 even though my machine acquired IP's and DNS info?
Here is another copy of the running config with today's changes:
---------------------Begin Configuration------------------------
Building configuration...
Current configuration : 2401 bytes
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname Network
boot-start-marker
boot-end-marker
security authentication failure rate 10 log
security passwords min-length 6
logging buffered 4096
logging console critical
enable secret 5 $1$4FJS$RQUEiWuTaMOAGhVx1O1Du0
enable password 7 046F03070C291D175F40
aaa new-model
aaa authentication login local_auth local
aaa session-id common
dot11 syslog
no ip source-route
no ip gratuitous-arps
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.100.1
ip dhcp pool Network
import all
network 192.168.100.0 255.255.255.0
default-router 192.168.100.1
lease 7
no ip bootp server
ip domain name Network
login block-for 5 attempts 5 within 1
multilink bundle-name authenticated
voice-card 0
no dspfarm
username Admin password 7 1526035D5D7C72252B3B
archive
log config
hidekeys
interface FastEthernet0/0
description $ETH-WAN$
ip address dhcp client-id FastEthernet0/0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex full
speed auto
no mop enabled
interface FastEthernet0/1
ip address 192.168.100.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
duplex full
speed auto
no mop enabled
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 dhcp
ip http server
no ip http secure-server
ip nat pool Network 192.168.100.1 192.168.100.254 netmask 255.255.255.0
ip nat inside source list 10 interface FastEthernet0/0 overload
logging trap debugging
logging facility local2
access-list 10 permit 192.168.100.0 0.0.0.255
access-list 100 permit udp any any eq bootpc
dialer-list 1 protocol ip permit
snmp-server community public RO
no cdp run
control-plane
banner motd ^C Welcome! ^C
line con 0
login authentication local_auth
transport output telnet
line aux 0
exec-timeout 15 0
login authentication local_auth
transport output telnet
line vty 0 4
password 7 107D0C1A10051B1F15
login authentication local_auth
transport input telnet
scheduler allocate 20000 1000
end
--------------------------End Configuration-------------------------
Let me know if there is anything else you guys need or I should do, I'll be back after classes today. Thanks again!
-John

I just updated my Apple TV software and now I can't get to iTunes and the menu keeps going back to basic menu. Software update fail!

Updated my software when prompted three days ago and as soon as the update was finished the basic screen came up with main menu. However, when I selected "Podcasts", "TV" or "Movies" the screen goes black and the same home screen comes up again. The only things that work are HuluPlus and Netflix and all non-iTunes icons. I can't buy anything from the iStore so if Apple wants me to keep iShopping at the iStore and take my iMoney you might want to make a patch available quickly.

I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu. Per Winston's suggestion, I logged out of iTunes and then tried to log back in. I am getting a message "the server is not responding- please try again later".
FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
Sounds like the update has overwhelmed the Apple servers.
Dave

Range of basic Linksys router in basement?

In a small house , in the basement , actually mounted fairly high with modem and the six ethernet lines going out to jacks in 6 rooms , will there be any problem picking up a signal upstairs. I'd rather save some money and get a basic Linksys wireless router and replace the wired router, than pay $70 more for Airport Express.
thanks. I just need to hear someone tell me the router will work through the ceiling.

Other than the problems that are reported here in general with a Linksys routers and Intel based Macs, if you set it up as you say it should reach the first floor just fine.
I have a Netgear WGR614 in the office in my basement. It is roughly in the center of the house. We have a ranch and the signal reaches to all parts of the first floor and outside. It is a newer - 30 year old - construction with no aluminum siding so that helps allow the signal outside.

OS 10.8.2 on an imac. Whenever I wake from sleep, the wifi has disconnected and I have to use the Netowrk Diagnostics in the Network settings to log back in to my router. Every time. is there any kind of fix for this?

I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router. Is there any way to get it to not disconnect everytime? I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer. Any help here?

I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router. Is there any way to get it to not disconnect everytime? I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer. Any help here?

How do I set a noise print for the entire track? (Back to Basics)

Ok. I've only worked in STP with single audio clips. Now, I'm trying to adjust audio inside a Multi-Track project sent from FCP... and it's a little different. At least to a guy like me.
I'm struggling with the most basic issue, and that's possibly why I can't find an answer to it.
Simply, "How do I go about setting a noise print for an entire track?" I've done this for a single audio clip, but now that I'm in a slightly different environment my old ways don't work. I've looked through video tutorials hoping to find something but no luck.
Any help is greatly appreciated!
JS

With the audio opened in SoundTrack Pro, select (highlight) a small portion that only contains the noise that you want to reduce. Sample that section. then select the entire audio clip and use the Noise Reduction tools to reduce the noise that you sampled earlier.
-DH

Back to basics. IP Route

Similar Messages

Maybe you are looking for