Back to my Mac and passwords?

Hi,
I have been using BtmM with my MB and my MBP so far so good, I am using an AE as router and Comcast for my ISP.
I do have a small problem with my password. I can see my MBP on my MB finder I click and go to screen sharing, I enter my MB user name and password (setup restricted to my MB ) select "keep in keychain" then BtmM comes up and it's working great. I quit the BtmM session and try now to connect to my MBP to access the HD. Everytime it is asking me for a user name and password, looks like keychain does not keep my info.
Went to keychain and sure enough my account username and password are there.
Do I have to use a different username and password for screen sharing and for connect? If so is there a way to use the same username and password for Screen Sharing and Connect?
Don't understand what's going on....I might have messed up my initial setting.
Thank you.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Similar Messages

HT1284 Can I back up my Mac and my pc to the same external hard drive? If so, could you explain how? Thanks.

Can I back up my Mac and my pc to the same external hard drive? If so, could you explain how? Thanks. I am a new user with mountain lion.

You could partition the drive into 2 partitions. One formatted as HFS+ for Mac OS X back, and one formatted as NTFS for Windows backup.
You would have to move the drive from system to system to do your backups. If there are 2 systems, I would suggest just getting separate drives for each, unless they are both laptops, then you will be disconnecting the drives all the time anyway.
Unless Windows is running in a virtual machine on your Mac. Then a partitioned drive would be fine.

I know my Apple Id (not .mac) and password but I can't logon to ichat. I keep getting a message of password not matched. Do I need to create a new account for Ichat?

I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat. I keep getting a message of password not matched. I saw somewhere that my Apple id is the same as my ichat account. Do I need to create a new account for Ichat? I've already reset my Apple id password 3 times in the last 2 days. What am I doing wrong?

Hi,
At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
Other IDs such as to log in to Discussions were know as Discussion IDs
Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
There can be a variety of combos now
iChat Name
@mac.com before MobileMe
@mac.com post MobileMe
AIM Names
AIM names current
MobileMe (@Me.com)
Style
Email Address valid with the .Mac service prior MobileMe Note 1
Email style Name Valid with AIM
May or may not be an Email address
Can be AIM issued or third party Email address
Valid Email with MobileMe Service
Other Abilities
May also be Currently valid email linked to a MobileMe account
Maybe Valid Apple ID
Is a Valid AIM Screen Name
May Not be a Valid Apple ID (was an option choice at one stage)
Is a Valid AIM Screen Name
May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
Apple ID
Possibly (likely)
Possibly (depends when Registered)
More currently Yes.
No
No
Yes
Glad I could help.
8:39 PM Thursday; September 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can i back up my mac and windows operating system on the one hard drive?

Hello everyone, i use a 4TB external hard drive to back up my imac. I recently installed Parallels and Windows 8.1 so I can run a PMS for my business. Now that i have installed Parallels and windows 8.1 on the mac can i format the drive so it will back up the mac and the windows operating system? Thanks!

If you want to back up with Time Machine, you need a GUID partition table and an HFS (Mac OS X) partition. If you can also create a Windows partition without destroying the partition table, then you can use the same drive for both systems. I can't give you specific instructions for Windows.

I am looking to back up my MAC, and I need to know how big of an external hard drive I need

I am looking to back up my MAC, and I need to know how big of an external hard drive I need. How do I determine this?

Well, they recommend at least 2 - 3 times the size of your hard drive if you are using Time Machine because that keeps making backups until it runs out of space (and then deletes the oldest to make room for the newest).
However, if you prefer to have a bootable clone as a backup, you need about the same size as your hard drive since it is a perfect copy of your system (unless you want to partition and keep an older clone separately).
So, check to see how large your hard drive is and go from there.

Back-to-My-Mac and MobileMe?

Trying to set up Back-to-my-Mac and this site http://support.apple.com/kb/ht1109 says I have to have a MobileMe account...well I just transferred it to iCloud!
So in System Preferences>iCloud I have checked Back-to-my-Mac...but what else do I have to do to my MacbookPro or iPad to use it?
NEVER MIND...I FOUND THE ANSWER AT http://support.apple.com/kb/HT4907

Never mind....I figured this out!

Back to my Mac and Verizon DSL must not work

I did everything is says to do to get Back to my Mac working and it doesn't work on Verizon DSL.
I enabled UPnP on both routers(each router is in a different home with different account), logged into .Mac, turned on file sharing and screen sharing and turned on Back to my Mac and I can't get either computer to show up.
I even logged out of .mac and logged back in.
Am I missing something?
Thank You
Doug

Are the ports in fact open from the net?
This means at any one of the following sites:
grc.com shields up
http://www.dyndns.com/support/tools/openport.html
http://www.whatsmyip.org/ports/
http://www.canyouseeme.org/
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Back to my mac guest password not working or changeable

Hello,
I'm trying to connect to my mom's macbook pro (2010 Leopard) using Back to My Mac. I am running Snow Leopard (10.6.8) on my iMac (2Ghz Intel Core Duo). I am unable to upgrade to Lion because my iMac is too old.
I have upgraded my mobile me account to iCloud but I am still using Back to My Mac with my Mobile Me information.
I have gone through all the steps for entering mobile me acct info on both computers, turned file and screen sharing on - on my mom's mac, turned off her firewall, turned off virus barrier, etc.
I am able to reach the point where my finder window shows her computer and I can click on it.
My trouble is that when I click Connect As, there is no option to connect with an Apple ID. There is only an option to connect as a guest or registered user. I can connect as a guest, but then, when I try to use screen sharing, I still need a name and password. Nothing I have used has worked.
If I try to Connect As, as a registered user, I have the same problem.
Thanks a lot for any help.

I finally figured it out. Needed to update her Airport firmware and allow guest access, and also changed Sharing preferences to Allow Access for All Users.

ICloud, MobileMe, Back To My Mac, and remote Time Capsule inconsistencies

I just upgraded one of my two computers to 10.7 (a little late - was hoping to avoid a problem - oh well).
After the upgrade I updated my local Time Capsule with the "new" Back To My Mac feature via Airport Utility as requested.
However, when attempting to connect to my remote TC it is not visable in Airport Utility of in the Finder Sidebar under "Shared" since it is still using the "old" BTMM through MobileMe. I can confirm this since my seoncd computer is still using 10.6 and can connect fine to this remote TC via the "old" BTMM.
I want to upgrade the second computer to 10.7, but then I will not have access to the remote TC in order to reset it's BTMM from the "old" to the "new" version of BTMM. Yes, I could go and get my remote TC (used for off-site backups), bring it home, connect it to my local LAN, update it, then return it to it's remote location - but should I have to if BTMM is a feature of 10.7 and iCloud? Has anybody else resolved such an issue?
Thanks in advance!
More info:
Both TCs are running the latest firmware (7.6.1)
Using both Airport Utility 6.0 and 5.6 (5.4 on the 10.6 Mac)

If this is the drive I back up to, will my Macbook back up to the drive over the net using Back to my Mac when I am not at home?
I would guess that you could find a 3rd party application which would be able to backup to a remote drive.
Although Time Machine might do that, the problem is that Time Machine would see the drive accessed locally (while connected to your local LAN) and the drive accessed remotely (via Back to My Mac) a two completely separate drives. Therefore (if Time Machine allows this) a backup done locally would have no impact to a backup done remotely.

Back to My Mac and remote servers?

Hello --
I'm trying to figure out if there's a way to connect to servers mounted on my Mac at work while accessing it from home via Back to My Mac. I don't control port mapping on the router at work, which apparently doesn't support UPnP or NAT-PMP. But I am able to connect to either machine from either location.
When I connect to the work Mac, though, I'm only able to see the local hard drive, not servers mounted on that computer. Is there any way to extend the connection to the rest of the network? I can also use LogMeIn Hamachi, but I run into the same issue there.
Any advice is welcome. Thanks.

well I know when I had back to my mac, I could ssh into a computer using the address format computerName.userName.members.mac.com. So if my mobileme name was [email protected] and the computer's name in sharing was imac. the address would be imac.bob.members.mac.com. If you have ARD I could be worth a shot, see if it works.
What's are you missing with back to my mac? copy/paste? terminal? Remote install?

Back to my mac and cable modem

I can't find a definitive answer to this question. Is there a cable modem that is compatible with Comcast that supports Back to My Mac?
Right now we have Comcast for business with fixed IPs, so I have just been using afp:// and vnc:// to access my home mac while on the road. But in the interest of saving $$$, I want to switch to Comcast for home, which doesn't offer fixed IPs.
The last time I tried (with Mavericks), I could not connect to any computer at home through Back to my Mac because the Comcast-supplied modem didn't support Upnp (Universal Plug and Play). A brief search could not find any cable modems that do support Upnp. Am I missing something, or should I give up on the idea?

Is there anyone out there who uses Back to My Mac (for sharing files and screens) and a cable modem? If so, how well does it work? Did you get a special modem or just the cheapest one that you could find?

Back To My Mac and L2TP

Hi,
In version 7.5+ firmware for the AEBS if you used "Back To My Mac" the base station
would silently ignore any user attempts to redirect the L2TP ports.
This of course would screw up any attempt to use the VPN software included in
Snow Leopard and Lion.
I was stuck at the 7.4 firmware level for almost a year until I found the knowledge
base article that noted this bizarre behavior.
I removed my name from the back to my mac panel and I was able to use the
system VPN with firmware versions >= 7.5 ;(
I never was able to get back to my mac to work at hotspots, I suspect that both
ends of the network need to support Apple's PMP protocol.
Does anyone know if the 'new' Back To My Mac implemenation still disallows
users from redirecting the L2TP ports?
Jerry

So I've found the offical word burried in an Apple Document...
http://support.apple.com/kb/TS1629
scroll down to Port 4500 which is used for IPSec VPN and Back to My Mac...
4500
UDP
IKE NAT Traversal
ipsec-msft
Mac OS X Server VPN service, Back to My Mac (MobileMe, Mac OS X v10.5 or later).
Note: VPN and MobileMe are mutually exclusive when configured through an Apple access point (such as an AirPort Base Station); MobileMe will take precedence.
NOTE TO APPLE:
1) Do NOT create network services that conflict with well known and used TCP and UDP ports.
2) If you create two conflicting services. Please MAKE A NOTE IN THE MANUAL for OS X Server so Admins are aware of the problem.

Back to My Mac and Vonage Linksys RTP 300 Router

I am trying to get Back to My Mac to work with my iMac running 10.6.2 and my PowerBook G4 running 10.5. But I have a problem with my router... I use the Vonage (RTP-300) and it is not one of the supported routers on the list.
I basically have the same question as this user:
http://discussions.apple.com/thread.jspa?threadID=1518112
Although the question has been answered, I don't know how to use my Time Machine as the base station and have my Vonage connect to it without making it the router. Right now this is my set-up:
Cable box > Vonage RTP 300 > Time Machine > iMac
Can someone please help me with step-by-step guide? Thanks in advance!

Can anyone help me please? I'm desperate! Thanks in advance!

Back To My Mac and Cisco VPN client

I've used back to my mac for a while and love it. Recently I've had to start using the Cisco VPN client and every time I use it it says "Because Back to My Mac is turned on, your VPN connection cannot be established with the server. Would you like to turn off Back to My Mac?". Is there any way to run them both without having to keep starting and stopping back to my mac?

I too have this issue.
Every time I have to connect via VPN, I have to disable my Back to My Mac.
Kinda *****.
Any solution?

I backed up my mac and now i can't install itunes

i did a back up of my mac and my itunes disappeared,so when i try to download it it says i need a MAC OS X 10.6.8 or later...but i'm installing the same one had!

It sounds like you may have done an iTunes sync. If so you will need to connect the phone to the computer and sync again but with different settings on the Photos page of iTunes. See the instructions below (more details in iTunes: Syncing photos - Apple Support)
To delete synced photos and videos from your device
In iTunes, click the Device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper-right corner first.)
Click the Photos tab in the resulting window.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Note: To delete all synced photos, deselect "Sync Photos from" and, when asked, click "Remove photos."
Click Apply.

Back to my Mac and passwords?

Similar Messages

Maybe you are looking for