Back To My Mac Port Forwarding

I find this stuff confusing.
I want to see my new Comcast business all Mac LAN from my home Mac, just like I did when my business had Verizon DSL. The only thing that has changed is our new Comcast CableModem, we still have our older AppleTimeMachine BaseStation (which serves as our router).
In the past I could log into any machine on our business LAN from home, but now I can see but not log-in.
I don't need Apple's high prices remote access software to do this. In stead, my home and business Mac's only need to have the same DotMac account and Back to my Mac turned on. All machines have leopard and snow leopard.
I think I need to have 2 lines for the firewall, ports 443 and 4500 (I might be wrong). I have 6 boxes for each line, going from left to right. Could someone suggest what to place in each box please?
Thanks in advance ...
Application Name PublicPortRange PrivatePortRange IpAddress
Box1: BackToMyMac Box2: ? Box3: ? Box4: ? Box5: ? Box6: ?

Hi ollie,
If you're still having problems with this please feel free to contact us via the webform link in my profile and we'll check to see what the current status of the investigations with Back to my Mac is.
Cheers
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

BT Home Hub 3 + Back To My Mac / Port Forwarding

I've recently got BT Infinity and along with it a BT Home Hub 3 which doesn't seem to be playing nicely with Back to my Mac.
The setup on the Mac side of things is correct and I can see my remote computer but I just can't connect to them, or vice versa. The Back to My Mac preference is showing that the router needs configuring for better performance.
I've ensured UPnP is enabled and forwarded the following ports to the device:
TCP 5354
UDP 4500
UDP 5353
UDP 500
UDP/TCP 4488
Which I found listed in http://support.apple.com/kb/TS1629
After doing some checks on these ports using http://canyouseeme.org it would seem that only one of these ports is open, and even then it's occassional.
BT seem to state on http://bt.custhelp.com/app/answers/detail/a_id/12529/~/why-do-i-get-an-error-message-when-using-appl... that 'Back to My Mac' isn't compatible and this is due to a compatibility issue on Apple's part. Frustratingly this article doesn't indicate a date when this was posted. Never the less, I would presume this could only be UPnP related — i.e. the necessary ports won't open automatically. I'm unsure of what other compatibility issues there would be. If the ports are open it should work fine.
I've read numerous threads in many forums about the BT Home Hub 3 port forwarding not working correctly, is this still true? If so, surely the device should be deemed faulty or a firmware update should have been put in place by now to resolve this. I can't seem to find any recent articles regarding this.
Thanks in advance for any help!
Solved!
Go to Solution.

Hi ollie,
If you're still having problems with this please feel free to contact us via the webform link in my profile and we'll check to see what the current status of the investigations with Back to my Mac is.
Cheers
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Post Moved Mac Port Forwarding Issues

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Mac-Port-Forwarding-issues/td-p/550779
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Does this help...?
http://community.bt.com/t5/Other-BB-Queries/Port-forwarding-and-Loopback-DO-work-YMMV/m-p/538328

Time Capsule closes Back To My Mac port!

I have my iMac setup to use the Back To My Mac feature and is connected to a Time Capsule running the latest firmware. What happens is that I won't be able to connect to the iMac from a remote location every so often. I will restart the Time Capsule and everything will be fine for a couple of days and then poof! it will be gone.
I can connect to my Time Capsule disk from a remote location no problem.
Could the Time Capsule just decide to close that port for some reason? I tried to open the port Back To My Mac uses and no such luck...
Any ideas?
Thanks!

solved after Software and Firmware Update

Are "Back to my MAC" and "Port Forwarding" mutually exclusive?

I have been using APExtreme and Port Forwarding successfully for several weeks now. The PF is to allow access to game players on a PC which acts as a server on the web. All Good.
One more thing, I have a ISP provided wireless modem/router to talk to the cable and the world. It seems to work either bridged or un-bridged.
I have disabled the wireless on the ISP's modem/router. (Actually the ISP's device doesn't hold a candle to the APE.)
Still all good.
So the firewall is on in the APExtreme and none on the modem router, and I have a port defined for my gamers to get access to my server in the APExtreme.
I now want to implement Back to my MAC on my MBP and my other Apple devices. I believe these use iCloud for which I have an account and it seems to be working well with my iPhone.
In Properties, when I select BtmM, iCloud says communications will be slow if I have port forwarding on. Also I will not be able to use the router function in my Modem/router.
I'd really like to have the modem/router firewall up, and do the port forwarding there, but the BtmM will likely not get through.
So what does anyone suggest?
Can I use BtmM and port forwarding without too much degradation?
Please advise.
Thanks
Barry

To best answer your question on whether the two are "mutually exclusive," let take a look at how Back to My Mac (BTMM) basically works.
BTMM - General Requirements
OS X Leopard 10.7.3+
Active iCloud account. Each Mac & the AirPort router, that will be relying on BTMM, needs to be configured with the same account.
A publicly reachable IP address for your router.
A router that supports either NAT-PMP or UPnP. For AirPorts, be sure it is running 7.6.1+ firmware.
BTMM uses TCP port 5354 and UDP ports 4500 & 5353 for communications.
BTMM - Basic Communication Flow
For a computer connected to the Internet via a router, BTMM "asks" the router for its configuration information. For a router, like your AirPort, that uses NAT-PMP, BTMM will ask the router to assign arbitrary public ports. In turn, the router will provide these port assignments (& the router's Public IP address) back to BTMM.
BTMM then sends this information to the iCloud account. In background iCloud updates a special set of DNS entries to be used by BTMM. These entries are then made available to all BTMM clients using your iCloud account. When a computer, with BTMM enabled, uses your iCloud credentials, it automatically retrieves a list of all other computers/routers that are registered with the same account. All these devices should then appear under the SHARED section of the Finder.
When attempting to connect to a remote computer (or router), BTMM creates a secure connection to that remote device using the information from the iCloud account.
Once the connection is established, the devices can then communicate with each other.
So potentially, unless you are using Port Mapping for any of the ports BTMM uses, they should not conflict.

Port Forwarding to Mac Pro with 2 different internet connections

I have my Mac Pro connected to the back of my cable modem. I have given this service the name "Cable" in my network preferences. The details are:
IP: xxx.xxx.xxx.100
Subnet: 255.255.248.0
Router: xxx.xxx.xxx.1
I have the other Ethernet port of my Mac Pro connected to the back of my Airport Extreme which runs ADSL+ from another ISP. I have called this service "ADSL". The details for this connection are:
IP: xxx.xxx.xxx.188
Subnet: 255.255.255.0
I run a calibre server on the Mac Pro and on my PC (the PC is directly plugged into the back of the Airport Extreme). I have a Dyndns service that works on the address of the Airport Extreme base station.
I can access the PC's calibre server via the mobile network but NOT the Mac's. Even though I have port forwarding to the Mac's reserved IP address of 188, I can't access the server. I can access it on my iphone/ipad via WIFI but not from the mobile network.
If in my Network preferences I change the order of the services i.e. make the ADSL the top service and cable the second, I CAN access the server from the mobile network. It works as it should. If I change the order so that the Cable service is on top, I can't access the server again.
Why does this happen? Can I fix this? Do I need to set up another Dyndns service on my Mac Pro?
Any help would be greatly appreciated. I am going to post this as a new post as well because I'm not sure whether the people that were so helpful last time will know that I have updated the post.

Just installed TeamViewer and we're using that. Works great.

How can I use Back to my Mac when my ISP blocks port 1900?

I was just forced to switch ISPs (don't ask...) and it turns out that my new ISP (Astound) lied to me and actually does block port 1900, which means that Back to my Mac (on which I rely) does not work.
Has anyone seen this and found a viable workaround? Preferably one that is easy for my non-technical family to use also, but all suggestions are welcome.
Thank you!

So, I convinced my ISP to open port 1900 and they did, but it's still not working.
I get two messages that make no sense to me, but I hope indicated something that someone here can help me undertstand...
When I open the iCloud preference pane in System Preferences, It says just below the Back to my Mac setting "Configure Router for better performance" - My Airport Extreme is configured with Back to my Mac and it looks like my account shows a green indicator.
Second, next to the Back to my Mac setting in the iCloud preference pane, there is a button labeled "Details..." When I click that it tells me that "Back to my Mac is not working properly because the DNS server isnt' responding" and suggests I contact my ISP for a different DNS server.
All other internet services - including iCloud services - are working fine. I even tried changing my DNS servers to Google's public DNS servers and nothing changed.
Any suggestions are very much appreciated! Thank you!

Port Forwarding To Two Macs with Port 22 limitations

This is another port forwarding/port 22 issue and I've look around and not seen an answer to my specific problem. I work for a business that has an in-house ad system that runs on a Mac Mini. I have been accessing that Mac Mini remotely because we set up port forwarding through the Linksys rounter that is at the business using port 22. This is the only port that works for this connection to the mini and the software.
We are now adding a second Mac Mini to send the ads to a different set of monitors. I can't set up port forward to the new mini on the same port so I don't know how to connect to this mini remotely. Is there a way to get into the first mini through port 22 and then somehow communite to the second one through the first? Is there another way to do port forwarding...or have the linksys router switch from one mini to the other when a request comes in? There will only be one remote computer trying to reach either Mac Mini so there will never be simultaneous traffic coming in. Any help would be appreciated!
The linksys router is critical to the business becasue a host of other devices are forwarded though it as well.
Thank you.

klara wrote:
Having set up my IP camera with HH4 successfully, I've now got another one and would like to set it up as well. I gave it a unique, static IP address which my router can see fine. When I try to set up port forwarding, I get a message saying:
"The game or application you’ve selected conflicts with an application (IP Cam 1) you’ve already assigned to another device. Please remove the other application or select the same device."
I am not being given the option to select the same device.
I'm now wondering if port forwarding to two identical devices actually works in principle with HH4? Has anyone else done this?
If in the Home Hub 4 A you go to
Advanced Settings
Firewall
Port Fowarding
Manage Games and Applications
You get the following statement:
"Each game or application can be assigned to only one device on your home network"
I would think that the only way round your problem is to have each Camera running a different application or the same application with a different name.
Does the remote browser app need to know the application name or just the device name ?
If you think about how Port Forwarding needs to function you need a way whereby the remote user needs to be able to tell the Hub what Camera to talk to.

Port forwarding for Mac that shares internet to Airport in bridge mode?

I use Air Video server, which allows me to stream movies from my Mac to my iPhone or iPad. It sits on port 45631 and that's closed.
I recently moved from NYC to CO, and because of my cable modem not being compatible with my older Airport router, I must use my Mac Pro to forward my Internet service from one Ethernet port to another - so that my older Airport Extreme can then broadcast wirelessly.
Since I use the AirPort in bridge mode, and the Mac is forwarding the connection - how do I forward the port so Air Video can send through to the internet?
thanks for ANY help, I'm a bit lost here

I use Air Video server, which allows me to stream movies from my Mac to my iPhone or iPad. It sits on port 45631 and that's closed.
I recently moved from NYC to CO, and because of my cable modem not being compatible with my older Airport router, I must use my Mac Pro to forward my Internet service from one Ethernet port to another - so that my older Airport Extreme can then broadcast wirelessly.
Since I use the AirPort in bridge mode, and the Mac is forwarding the connection - how do I forward the port so Air Video can send through to the internet?
thanks for ANY help, I'm a bit lost here

How to do port forwarding from wla2-g54l Buffalo bridge to mac mini

Hi,
I am trying to get Azurus to remove the "firewall block" message and I think I have narrowed it down to port forwarding.
I have set up port forwarding from my X modem to the Airport Xpress base station. I have then set up the port forwarding from the base station to the buffalo.
The problem I have had is setting up the wla2-g54l to forward the same port to the mac mini....
any Ideas? Not much luck on the Buffalo website.. and I have RTFM. Many times!
Cheers
Mac Mini G4 1.2Gz Mac OS X (10.4.8)

It sounds like your set-up is in a horrible mess with 3 levels of NAT going on.
What you should really have is the X-Modem configured in it's default mode "Modem Mode" where there will be no need to do any port forwarding as the modem is acting as a pure modem without having any influence over ports.
Then the Airport express should be configured to "Distribute IP addresses" so that the Airport is acting as a router. I presume that you use the Buffalo unit as a repeater for the AIrport so you should set-up WDS so that both are on the same network. Then your computers will all be using IP addresses in the 10.0.1.x range as issued by the Airport. You can then configure the Airport to directly forward ports to the IP address of your computer. Therefore only one instance of NAT and only one set of port forwarding rules.

Port forwarding using Transmission & Mac Pro

I do a lot of film editing for various clients and make my work available to a host of individuals via torrents using Transmission 2.84. Some complain my client (Transmission) is not connectable and they are not able to directly connect.
To fix this problem I'm told I need to perform port forwarding but I am lost as how to do so.
I'm on a Mac Pro with built-in Airport Extreme using Yosemite. Some advice has been to open System prefs > Security >> Firewall and make sure "Set access for specific services and applications" is selected then click the + button and select Transmission from my Applications folder then make sure the pull down menus is set to "Allow incoming connections".
The problem here is that I find nothing under Firewall offering the "Set access...", just the option to turn on/off Firewall. I turned it off but still no success.
How exactly (step by step would be helpful) do I set up port forwarding using the above machine and torrent application?

I do have exactly 1 computer. The computer came with an internal AirPort Extreme card. The machine is sharing a self-assigned IP address to provide an internal WiFi connection with an HP Printer.
Inserting the IP address takes me to a Comcast Business Gateway screen asking for User Name and Password.
Looking up Name/Password for AirPort Extreme models I get this:
Model
Default Username
Default Password
AirPort Base Station (Graphite) 2
(none)
public
Airport Base Station (Dual Ethernet) 2
n/a
password
Airport Extreme Base Station 2
n/a
admin
airport5 1.0.09
root
admin
AirPortExtreme
NONE
NONE
I also tried the suggested Comcast and Comcast Home Networking router name/pwd. I do not find a name/pwd for a Comcast business router.
All are rebuffed as incorrect.
Here is AirPort Extreme info:
Card Type:
AirPort Extreme (0x14E4, 0x88)
Firmware Version:
Broadcom BCM43xx 1.0 (5.10.131.36.16)
MAC Address:
00:1c:b3:ff:5a:a8
Locale:
FCC
Country Code:
X0
Supported PHY Modes:
802.11 a/b/g/n
Supported Channels:
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Status:
Connected
Am I just using the AirPort Extreme card to provide the self-assigned IP address for WiFi and the actual internet connection is being handled by the business router provided by Comcast?
How do I overcome this hurdle?

How do I Block Back to My Mac on my router?

I would like to block Back To My Mac (BTMM) on my network without impacting other network traffic.
Would simply blocking UDP port 4500 work?

You don't say what machine(s) you want to connect to from where.
You could perhaps setup a port forward UDP port 4500 using NATural to a specifik machine on the server LAN.
Or use the VPN server so you can connect from Internet to any machine on the server LAN using remote access instead of screen sharing.
If you don't have Remote Desktop Admin you could use a VNC client like JollysVNC (I haven't really tried Back to my Mac).

How do I make Back to My Mac Work on 10.4 Server

How do I set up Server 10.4 to work with Back to my Mac. I am using my mac as a router to the internet. Internal to the Internet and an apple Ethernet card serving the other dozen or so devices. Looking at mobile me it says that I do not support NAT-PMP or UNP. NAT is on. ANy ideas anyone?

You don't say what machine(s) you want to connect to from where.
You could perhaps setup a port forward UDP port 4500 using NATural to a specifik machine on the server LAN.
Or use the VPN server so you can connect from Internet to any machine on the server LAN using remote access instead of screen sharing.
If you don't have Remote Desktop Admin you could use a VNC client like JollysVNC (I haven't really tried Back to my Mac).

Time Capsule disconnects internet when using web server through port forwarding

My current config is: 2TB Time Capsule running 7.6.3, Mac Pro running Lion (10.7.5), MacBook Pro running Mountain Lion (10.8.3), and a couple of MacBook Pro Retinas running Mountain Lion. My current ISP is Comcast.
I have the Time Capsule set up to port forward port 80 to the Mac Pro for the purpose of running a web server. Most of the traffic is shuttling fairly large m4v files back and forth to work (work product from video editing work). I can reach the webserver on the Mac Pro just fine from the outside world, and can list files in the directory just fine. When I initiate a download (via right click on a link, "Save As..." or whatever), the Time Capsule reports that the Internet has been disconnected, and all machines inside my network lose access to the outside world. I have to either power cycle the Time Capsule, or disconnect/reconnect the Cat-6 cable between the cable modem and the Time Capsule to re-establish the connection. Interestingly, the download continues and completes on the other end without issue (so, the connection is actually still there!).
Before switching to Comcast, I was on AT&T Uverse - Uverse includes a router, so I had the TIme Capsule set up in Bridge Mode. That worked fine. I also have an older 500GB 1st generation Time Capsule. I set it up with the same config as my 2TB TC, and it shows the exact same behavior - internet disconnects upon initiating a file download through a forwarded port. I then hooked the Mac Pro up directly to the cable modem. I can initiate a download without issue, and I continue to stay connected to the Internet without problem. Called Comcast anyway - they report no errors on the line, but reset the whole device chain anyway. No change in behaviors.
I tried downgrading the Time Capsule software to 7.6.2 (the earliest version that came on it). No dice, same behavior.
So... I called Apple. Complete and utter FAIL. Apple Support reports that they have no training in the port forwarding features of the Time Capule or Airport products, and cannot help me resolve the issue because of that. So, I have a $300 router that apparently cannot perform a simple routing function (download through a forwarded port), that I cannot troubleshoot (because Airport software v7 is an epic fail in that regard), made by a company who cannot support it - and everything this $300 device is doing can be done by a $50 device with a $100 external hard drive?
Do I understand this situation correctly? What have I missed in trying to troubleshoot this thing?

Apple Support reports that they have no training in the port forwarding features of the Time Capule or Airport products, and cannot help me resolve the issue because of that. So, I have a $300 router that apparently cannot perform a simple routing function (download through a forwarded port), that I cannot troubleshoot (because Airport software v7 is an epic fail in that regard), made by a company who cannot support it - and everything this $300 device is doing can be done by a $50 device with a $100 external hard drive?
Do I understand this situation correctly? What have I missed in trying to troubleshoot this thing?
Excellent summary.. I think you have covered all the salient points most thoroughly.
Port forwarding on the TC I would put into the category of "epic fail"
I have a nasty feeling it just doesn't work in many cases. Clearly from your situation the port is forwarded correctly.. it is the actual download that is causing the device to crash.. which is probably not the port forwarding itself that is at fault but rather the external link and opening another port for the download to happen.
Many of the issues were caused by using icloud and btmm.. which would work a lot better btw. Although the hassle there is needing to offer that as a service to any Tom Dick or Harry.
Let me suggest a work around or other things to try.
I also have an older 500GB 1st generation Time Capsule. I set it up with the same config as my 2TB TC, and it shows the exact same behavior - internet disconnects upon initiating a file download through a forwarded port.
Use 5.6 utility.. more info below. And take the firmware of this unit (Gen1) back to 7.5.2 (before icloud mess ups in 7.6).
You can go back to 7.5 firmware also in Gen4 TC if it is more than about 14months old.. Simply hold down the option key when you select firmware and the old versions will show up. If your TC came with 7.6.1 (the 7.6.2 was withdrawn as it was even bigger failure than 7.6.3). then you cannot go back.
You might also find downloading via http is not as reliable as using FTP.. FTP is a better and more efficient protocol. It should be no problem to setup ftp server on the mac pro to allow download via ftp even with a browser.
But in the end.. your $50 router suggestion.. well perhaps a little more than that.. $80-100 will work very well.. also this router can be setup with a Hard Disk and offer the files to the internet via FTP.. without needing full network access to your internal network.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Port forwarding but can only connect to wifi in Bridge Mode

Hi
Our ISP is TalkTalk and we use their Fibre service which connects through a BT Open Reach Modem. The TalkTalk router seemed to causing drop outs in wifi on my macbook pro so I bought an Airport Time Capsule for the wifi router and to back up my mac.
We aren't issued with PPPoE details and the advice from the TalkTalk community was to connect with the Router in Bridge Mode. This has worked a treat with the various Apple and non Apple items we have in out house except one.
We have security cameras which we control through a Windows laptop and can view one out phones. To make this happen we have to set up port forwarding. However, we can't do this as it's in Bridge Mode (as far as I understand).
I'm afraid my knowledge of these things is very basic so I'm hoping that someone will have an easy answer to this. Anyone got any advice on how I can make this pretty white box do its stuff please?
Thanks in advance!

No idea what a double NAT is but you clearly do so here goes...
traceroute 8.8.8.8 on the mac gives as follows:
traceroute to 8.8.8.8 (8.8.8.8), 64 hops max, 52 byte packets
1 192.168.1.1 (192.168.1.1) 6.246 ms 2.840 ms 2.875 ms
2 89-168-80-1.dynamic.dsl.as9105.com (89.168.80.1) 14.513 ms 14.967 ms 20.831 ms
3 host-78-151-225-23.static.as13285.net (78.151.225.23) 19.752 ms 20.399 ms 28.106 ms
4 host-78-151-229-12.as13285.net (78.151.229.12) 19.760 ms
    host-78-151-225-140.static.as13285.net (78.151.225.140) 18.391 ms
    host-78-151-225-136.static.as13285.net (78.151.225.136) 18.467 ms
5 host-78-144-8-11.as13285.net (78.144.8.11) 29.582 ms
    host-78-144-8-53.as13285.net (78.144.8.53) 31.276 ms
    host-78-144-8-5.as13285.net (78.144.8.5) 27.278 ms
6 72.14.214.222 (72.14.214.222) 37.593 ms 25.132 ms
    72.14.242.127 (72.14.242.127) 30.195 ms
7 209.85.252.188 (209.85.252.188) 27.070 ms
    209.85.252.186 (209.85.252.186) 77.680 ms
    209.85.252.188 (209.85.252.188) 24.477 ms
8 209.85.253.90 (209.85.253.90) 24.506 ms
    209.85.253.196 (209.85.253.196) 29.255 ms
    209.85.253.90 (209.85.253.90) 26.403 ms
9 66.249.95.173 (66.249.95.173) 41.521 ms
    72.14.232.134 (72.14.232.134) 35.473 ms 30.789 ms
10 209.85.251.231 (209.85.251.231) 30.069 ms
    216.239.49.45 (216.239.49.45) 31.578 ms
    209.85.252.83 (209.85.252.83) 31.383 ms
11 * * *
12 google-public-dns-a.google.com (8.8.8.8) 38.442 ms 30.063 ms 30.282 ms
traceroute 8.8.8.8 on the mac plugged into the HG533 gives as follows:
traceroute to 8.8.8.8 (8.8.8.8), 64 hops max, 52 byte packets
1 192.168.1.1 (192.168.1.1) 0.999 ms 0.679 ms 0.668 ms
2 89-168-80-1.dynamic.dsl.as9105.com (89.168.80.1) 13.577 ms 12.817 ms 13.668 ms
3 host-78-151-225-23.static.as13285.net (78.151.225.23) 16.828 ms 15.490 ms 24.315 ms
4 host-78-151-225-140.static.as13285.net (78.151.225.140) 18.755 ms
    host-78-151-225-30.static.as13285.net (78.151.225.30) 20.538 ms
    78.151.229.0 (78.151.229.0) 19.488 ms
5 host-78-144-8-29.as13285.net (78.144.8.29) 23.690 ms
    host-78-144-8-39.as13285.net (78.144.8.39) 26.756 ms
    host-78-144-8-59.as13285.net (78.144.8.59) 23.145 ms
6 72.14.242.127 (72.14.242.127) 24.608 ms 26.403 ms
    72.14.214.222 (72.14.214.222) 22.601 ms
7 209.85.255.78 (209.85.255.78) 26.205 ms 23.783 ms
    209.85.252.186 (209.85.252.186) 25.291 ms
8 209.85.253.94 (209.85.253.94) 25.553 ms
    209.85.253.196 (209.85.253.196) 58.607 ms 31.902 ms
9 66.249.95.173 (66.249.95.173) 49.369 ms
    72.14.232.134 (72.14.232.134) 32.418 ms 32.654 ms
10 72.14.238.43 (72.14.238.43) 34.146 ms
    209.85.252.83 (209.85.252.83) 34.292 ms
    216.239.49.45 (216.239.49.45) 29.860 ms
11 * * *
12 google-public-dns-a.google.com (8.8.8.8) 36.619 ms 36.902 ms 29.731 ms
Hope this gives the result we're after

Back To My Mac Port Forwarding

Similar Messages

Maybe you are looking for