Back to my Mac says UPnP or NAT-PMP turned off on router, but it's on!
Hi,
Back to my Mac in the iCloud pref pane says that UPnP or NAT-PMP is turned off on my 3rd party router. However, UPnP has been enabled on the router. Is this anything to be worried about? BTMM is working ok-ish, but I'm worried I still need to do something on the router as BTTM has this warning message showing up.
The router is a Huawei HG 523a firmware v1.2.
Apologies if this is the wrong forum. Let me know if so.
Thanks,
GAM
Also - is NAT-PMP available as a configuration option on non-Apple (airport) routers? I was reading something about BTMM by Glenn Fleishman (TidBits) & got the impression NAT-PMP was to be enabled on Apple routers & UPnP on non-Apple routers. Is this right?
In my router there is NAT Port Mapping, but is this the same thing as NAT-PMP? I must say, it's all a bit opaque...
Similar Messages
-
Not sure if I am doing this right. This is my first time in the support community.
I imagine what I put in my heading was supposed to go in here.
I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).Why do ISPs insist upon making things so difficult for their customers?
If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
Scroll down to DHCP Settings
You will need to log in with proper "technician" credentials. They are provided in the above link as
Username: tech
Password: t3lu5tv
... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business. -
Can someone recommend wireless hotspots that have uPnP or NAT-PMP?
I have a 2014 Macbook Pro.
I was just provided a new Verizon Jetpack MiFi 6620L.
When trying to connect via Back To My Mac, the connection constantly goes into "Reconnecting" mode.
Further reading indicates that the "router" that I connect to should have uPnP or NAT-PMP capability. The Jetpack has neither.
Could someone recommend a wireless card or help be get my configuration correct so the connection remains more stable?
TIA - JpI should have been more precise in what I'm looking for. The Verizon Jetpack is a broadband wireless card that acts like a router. It is not a standard router as was previously suggested.
-
I turned off firefox update but it is getting turned back on and telling me firefox 5.0 is available. I don't want firefox 5.0 until all my plugins work and I don't want to be bothered. I will followup in a few months on update. I use Ccleaner to delete tracks/history/cookies/passwords/site pref and to compress FF DB.
Hi czigrand,
Thanks for visiting Apple Support Communities.
Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/HT2736
Best Regards,
Jeremy -
I forgot iphone 4 passcode and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?
There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon. -
my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.
Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.
-
my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u
Option 1
Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad -
Whenever i try to sync my ipod a message keeps coming up saying "1 or more items could not be synced", apparently its error -69. Please help, i've tried rebooting my laptop, installing the latest itunes and turning off the wifi but nothing seems to work.
Are you using security software on your PC? If yes, try to disable the software or check the settings. More info here: http://support.apple.com/kb/TS3125
-
I need to unlock my iPod. I tried restoring it but a pop up box says that I need to turn off Find my iPod in iCloud settings, but how am i going to do that when I don't know my password?
http://apple.stackexchange.com/questions/105166/find-my-ipad-setting-prevents-re store/105192#105192
-
I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.
What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in. -
i have installed mountain lion. No problem with the instalarrion.
Now when i want to turn off my Mac mini, it restart and not turn off.
What happen?
Alain Hermosilla Ringger
ChileI reply to my self
I have a mac mini late 2009 with Mountain Lion
I solved this problem disabling the second monitor from the dvi conection and conected it again with the vga plug in. My main monitor also conected by a hdmi plug to my mac mini
My mac mini turn off with no problem now and the rebbot loop disapear
Alain Hermosilla
Chile -
My mac start up sound wouldn't turn off even if I mute my computer
My mac start up sound wouldn't turn off even if I mute my computer.
How can I fixt this?
Please help
Thank youThis works for me. Sets the start up sound volume through system preferences for the next startup.
Btu be warned that that startup sound is what tells you when things go wrong or when all is well.
http://www.macupdate.com/app/mac/16425/startupsound.prefpane -
I turned off my iPad, but when I went to turn it back on, the apple logo just stays there. It's been there for 10 minutes, and hasn't gone away. Help please.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
Sometime my mac mini reboot when i ordered turn off
Hello i have a problem; sometimes my mac mini reboot when i ordered turn off, then i have to turn off again, sometimes i need to do that twice.
Let it cool & see if you can get any of these...
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.
Except IntelMacs...
http://www.intelmactemp.com/list
Maybe you are looking for
-
using abap objects and alv There should be push button (Switch drill down button) at the top of the report. While pressing Switch drill down button it should display a popup window like material material gorup plant For example if a material group
-
URGENT - Migrating from 9i to 10g designer
Hi All, I have installed new repository for Designer 10g (10.1.2.0.2) and I have started Migration from Designer 9i (9.0.2.80.10). I have error message from ckrau61 with cause: "No Designer Repository has been detected. Please check connection detail
-
Hallo Guru, have you ever had this problem: I have created an update view, but when I try to update data via SM30... well, even if I save, no data is really saved...
-
Action Event Handler on Tree nodes
I have an actionListener event handler registered on a tree node as follows: <af:tree value="#{bindings.SomeViewObj1.treeModel}" var="node" rowSelection="none" id="t1" binding="#{EditFormBean.tree1}" displayRow="selected" summary="Tree" partialTrigge
-
IMac to extrernal VGA tv input.
I own a iMac 27" and would like to connect a small tv that i own. Its a Polaroid 15" Tv with an D-Sub (VGA) input. I have bought the mini display to vga adaptor and a male to male vga cable. Hooked it all up and cannot get the iMac to detect the disp