Back to SUID permission problems
No sooner did I get my permission problems taken care of w/ 10.5, than I got a bunch w/ my 10.5.1 update today. Just FYI, I've got 2 mac's w/ 2 independent 10.5 installs and updates to 10.5.1. Both are giving me the same error message in DU pertaining to SUID permission problems:
*Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.*
*Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.*
*Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.*
Any ideas on fixing this stuff or just wait for Apple to get around to it?
me too
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Documents".
ACL found but not expected on "System/Library/User Template/English.lproj/Downloads".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/jvm.cfg", should be 0, user is 95.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
Permissions repair complete
Similar Messages
-
Hi everyone,
We encounter permission problems with our Visual Composer Applications.
We have created three applications using the visual composer and accessing a BI-system as backend
But the developer has super_user permissions and we dont want our endusers to have them.
Therefor we created new roles only with the permission to see that specific report.
But now, the users are not allwoed to see the data.
The error says, that I should ckeck the permissions.
Well, I did. The user can execute the queries I used directly with BEx - no problem, but within the VC-application not.
So I assume the problem are permissions in the portal.
If I give the user super_user permissions it works, but thats not what I want.
I want the user having minimal permissions in the portal.
Is there somebody who can help me?
Sincerely
MarkHi
Your problem looks like portal authorization issue. There is separate role for 'End Users' to execute & view the portal iview. Just check with your EP administrator, he will solve the problem. There will be role like -
*VC_Role.
*eu_Role.
Regards
Sandeep -
Permission problems after upgrade to 10.5 on early Power PC G5 Tower
Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan -
Permission Problem when trying to Installation Adobe Flash Player
I'm having a problem installing the Adobe Flash Player in Windows 7 because I'm getting the now infamous message that there is not permission to install; however, mine is a bit different.
I used to have Adobe Flash Player on my machine but it has disappeared, possibly inadvertently uninstalled. Now, when I try to install the Flash Player, it appears to be almost done and then abruptly stops and gives the lack of permission message. Note that I am NOT getting it installed and then it fails on a restart as most seems to do --- it won't install in the first place.
Willing to try anything, I have downloaded and installed the subinacl.exe and the reset_fp.bat files in my Windows Resource Kits folder. I try to run the reset_fp.bat file as Administrator (which I am) and the cursor changes to the hour glass and things are locked up. I have to go to the Task Manager to end the process of Tools.
Next, I can simply click on the reset_fp.bat file and it goes through the DOS looking screen with line of text running down like crazy but the bottom line after it stops says that the client does not have the proper permission. Of course, that has not corrected my problem. I do note that the first instruction in running that routine is "Install Adobe Flash Player" and that brings me back to my original problem --- I can't get Adobe Flash Player installed in the first place. .
Anyone have any ideas --- I would be most appreciative.
Jim B.Please try the offline installer:
Internet Explorer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_ax.exe
Firefox and other NPAPI browsers:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe
If that doesn't work, make sure that your filesystem is in good shape:
Check your hard disk for errors in Windows 7
Then reboot the machine and try again.
If that doesn't work, please post your installer logs:
Where do I find the Flash Player installation log on Windows? -
Facing permission problem for accessing database
{color:#0000ff}Hello All,
I have just started in this forum. I am very new to j2me and facing problem and I need your help.
I had successfully signed the application and it was working properly on device. Next I added login module in my application where I am accessing a PHP from server which is having MySQL DB connection for usercheck. When I try with unsigned jar it works properly and when I try using signed jar it is showing me wrong username/password. I think it is midlet permission problem.
It would be very nice if someone can tell me what might be the possibilities that it is going wrong.
Thank you.
Regards,
-Anuradha{color}.Signing MIDlet has nothing to do with how data is send over the network. So please be sure that your signed MIDlet is not corrupting your data.
If you are receiving correct username / password at server side, then its server's responsibility to validate it Your MIDlet has posted the parameters right way.
I would suggest you to check following things
1) Check if server is validating the username / password.
2) What response does server sends you back after validating username / password. Check on both ends.
3) Check how your midlet processing the response from the server.
4) Do you get any exceptions?
but I am doing database connection through php which is on server, I hope it is not wrong way of doing it.Doesn't matter what technology is used at server side to connect to the database. -
Just got back my iMac with a brand new replacement hard drive through the iMac 1 TB Seagate Hard Drive Replacement Program. With only apps installed, no files and fonts added, the hard drive already shows permission problems. Is that normal? The replacement hard drive is a Seagate again, ST31000528BAS. Do people like their replacement hard drive?
Just now looking at these... Last recall 2009 MacbookPro Video issues, I waited 4 years and it took 4 trips to apple store with video of the machine problems... Days and months past, finally with stern discussion with manager, got resolved. Now Drive recall on work machine... better take advantage now. IF IT AIN'T BROKE DON'T FIX IT!
Should have thought of it... Have TM full back up... (will look into clone next time, now that I see this). Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH CRAP, still running 10.6.3. Updates crash with error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, "Oh, can't boot a newer system w/ old disk, that's why it won't read." PROMISES it'll be fixed, if you leave it over night... GREAT!
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... CRAP!! not running right... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still not solved. Evidently... either different account names caused problems... and/or they never restored personal "settings". Seems there are 3 ways to restor... Running Migration Assistant, Restoring after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM.
Can begin to make enough stink!! So now can't back up without doing a full 400 GB back up and possibly destroying any good back ups... can't work, liek having hands tied behind back. WAITING for solution! TICKED OFF!!! -
Permission problems. new to snow lepored
Hi i just recently bought an appple mac pro from ebay it came with snow lepored installed. i have been having some permission problems and need some help fixing then. here are the problems that are not getting repaired through the disk utility.
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
any help with this would be greatly appreciated??Welcome. You can ignore these. We all get them.
http://support.apple.com/kb/TS1448
Staticuss wrote:
i have been having some permission problems and need some help fixing then.
Are there other issues? -
Permission Problems Since Clean Install of Mt. Lion
I did a clean install of Mountain Lion last month. I reinstalled all my apps from freshly downloaded installers, rather than copy anything to my pristine system folder. I copied my music, photos, and other documents from my Time Machine drive. Now, I have constant permission problems on all these folders. I don't have permission to do anything to any of these folders or subfolders. I can't rip a CD to iTunes, I can't sync my iPhone. I can't download anything. I can change the permission on each folder individually, but there must be thousands of them. There must be an easier way. Changing permissions for a parent folder doesn't change the subfolders. Disk Utility reports no problems when I repair disk permissions. Thanks in advance for any help.
Also, the iPhoto app disappeared after the clean install. I don't know how to re-install it. Do I have to wipe my drive clean again and install Leopard from my original DVD that came with my iMac? That would be a huge job to get back to Mountain Lion. I'll post this question in another thread and link it here.Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’renot going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Contribute 6.5 "Access denied. The file may not exist, or there could be a permission problem."
Help.
After being forced to upgrade to 6.5 since my version would not work after upgrading to Mavericks OS I get the "Access denied. The file may not exist, or there could be a permission problem." error on one of the sites I manage when trying to publish an edit to a page.
I have looked at prior fixes but none seen to apply to version 6.5
I have uninstalled, reinstalled and now have a fresh install on a new computer and still the issue persists.
I'll appreciate any help to resolve this issue.
Thanks,
KortI encountered the same error message, then remembered I had changed the name of my hard drive. I changed the HD name back and was able to access. Now trying to figure out how I can change the path to my local files so that I can re-change my HD name.
-
Recurring disk permission problems.
I am having recurring disk permission problems on my MacBook Air (Rev. A 1.6GHz/OS X 10.6.6).I am using Onyx to verify and repair disk permissions, but after about a week the computer seems to slow down and respond strangely. I run Onyx again, and it repairs many disk permissions, but the same thing happens again after about a week. Below is the log from a repair disk permissions that I ran through Onyx earlier today.
What can I do to fix this problem? Any help would be greatly appreciated!
Started verify/repair permissions on disk0s2 Macintosh HD
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar"
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist"
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries"
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar "
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar"
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist"
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib"
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl"
Finished verify/repair permissions on disk0s2 Macintosh HD
Message was edited by: Mr. Mojo Risinghttp://discussions.apple.com/thread.jspa?messageID=12699721�
-
Cannot restore Mail from time Machine - permission problems
I am running Lion 10.7.2 and mail 5.1 (all software updates applied)
I know there is a fair bit referencing similar problems but I cannot find my solution.
I inadvertantly deleted a mail account and simply wish to restore the account from my time machine backups.
Time machine has been reliable in the past and my put my faith in it. However this problem now introduces a fair bit of mistrust which should never happen with a backup system.
I navigate to ~/library/Mail/V2 and then open time machine and select a known good backup (I hope).
I highlight the time machine account folder I want to restore and select "restore".
Time machine starts the restore normally but very quickly comes up with this mesage -
"The operation can’t be completed because you don’t have permission to access “.mboxCache.plist”.
(I am logged on as admin)
I have repaired permission on my HD to no avail.
I assume that the message refers to the time machine file but any attempt at changing permisions on the time machine backups fails as "not permitted" (I would not be surprised at this anyway as I dont know how the time machine file system works).
I then copied my complete mail folder to another disk and deleted the original and tried to restore the complete mail folder from the time machine backup.
A similar permissions error message occurs but on a different file.
I am getting nowhere and am rapidly losing faith in time machine - I totally rely on it.
Can anyone help please.I deleted the account using mail preferences, so following your advise:
I restored the pref file from the good known backup date.
I also used disk utility to repair the time machine backup volume which showed no problems.
First of all, restoring from time machine according to FAQ 15, the actual messages in the deleted account were indeed restored to the new mailbox that time machine created and could be viewed - that is fine and solves the problem of lost mail.
Almost solved - but what I was trying to do was :
I had two accounts which show under inbox and when you "get mail" the little whirling indicator shows activity which my wife (and I) liked. After I deleted the second (now unused account) there is no more indicator when "getting mail" and it is not obvious that anything is actually happening. Any mail received will show up under mail activity but if there is none we all just sit there with no feedback until it "beeps".
There was also the other issue of maybe wanting to get back all mail for the deleted account (which you solved).
I can of course recreate the account as a new one but I thought time machine would be able to restore the mail system back to where it was (as it should) - it seems it may not be able to which is not nice as in "what else will fail one day that I dont know about". To restore "as was" is why I tried to restore just the "missing" folder in ~/library/mail/v2 but keep running into these permission problems.
Time machine was the best backup system I have seen in over 30 years in computing but if it now "doesnt" under all circumstances it becomes useless and we will have to go back to manual or other backup systems. Surely Apple will fix it - a backup and restore system has to completely reliable or not at all.
I thank you for your help and, as I say, there is no real urgency as mail items can actually be recovered - it would be nice to be able to restore "as it was" however. -
Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?
Contact iTunes Store Support.
-
[MX 2004} Can't upload! The file may not exist, or there could be a permission problem
I'm running MX 2004 on Windows XP. All's been well for the
last few months, doing site maintenance at this part-time job. I
get tangled up a bit in checking files in and out, coming from
GoLive, and since there's no one else with FTP access, yesterday I
told it to check the entire site in. I didn't have any changes I
didn't want to commit, and I figured that would keep things a
little neater.
As of today, I can post revisions to existing pages, or
resize image files, but when I create a new page, or try to place a
new image file on an existing page, I can't upload it.
So, to be clear: I have two pages already up on the site,
index.html and apple.html, with a link between them. If I create
new page banana.html and make a link to it from index, index.html
will upload that revised link, but banana.html is refused with the
message
FTP error: The file may not exist, or there could be a
permission problem
I know the file doesn't exist (remotely); I just made it.
I've gone to Prefs and disable Check In / Check Out, which didn't
do me any good. What next?Can you open the FTP log, select one of these new files and
upload it- then
cut and paste relevant part of the ftp log?
Also- does this site have a "host directory", a subfolder
that your public
files need to go into? If yes- is this folder listed in the
host directory
line of the remote server info?
And odd past thing i've seen-
Had hosting that used public_html as the public folder name.
They also had a symbolic link named www that pointed to
public_html
Could upload/download existing files with www in "host
directory" line of
dw; but could not upload new files or work with files in
subfolders.
changing to public_html instead of the www symlink fixed this
for me.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Looking for a way to solve permission problem in windows 7
one of the biggest problems i have with this windows that even that i'm an administrator and the owner of the computer i always have permission problems folders i get a no access errors with files and folders even thoughe i should have full permisions i belive system restore doesn't work for me because permissions problem and i don't know what to do anymore i'v used uac i'v disable uac i downloaded a registry file to take owernship on files and folders and still problems so what can i do to solve all this problems?
and to be honest i really don't like the way windows 7 behave with permisions this is my computer and i am an administrator why do i have to fight to access folders like System Volume Information,Recovery,Documents and Settings why do i get the lock icon when i take owenership and i'm on the users list but when i add users everyting is fine?
10x in advance.:)Hello,
This is by design. You cannot access the folder or files are protected by operation system even if your current user account is Administrator.
System Volume Information is a hidden and protected system folder that the System Restore tools uses to store it information and restore points.
In Recovery folder, there are two files: Winre.wim and boot.sdi. With these two files, you are able to boot the system to Windows Recovery Environment (WinRE) and do a repair without inserting a Windows 7 installation disc.
If you want to access the protected folders like “System Volume Information”, use the following method, but I do not recommend you do this. It may cause some potential problems:
1. Right click the System Volume Information folder and choose Properties.
2. In Security tab, click Edit and then click Add. Type in “everyone”(without quote) and click Ok.
3. Then “Everyone“ will be listed under ” Group or user names”, click Everyone, and check “allow” full control option.
As BurrWalnut said, the “Documents and Settings”, it is a junction. A junction point is also a protected operating system folder that points to another folder. The junction point is an important part of application compatibility and does not contain any data or other files. In Windows Vista and Windows 7, the “Documents and Settings” folder has been replaced with “Users” folder. All of your user profiles are saved in C:\Users\User name folder.
Thomas Lin -
"How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7"
I'm in the process of publishing the following note (134280.1), titled "How to Resolve ORA-29532 Java 2
Permission Problems in RDBMS 8.1.6 and 8.1.7".
It will be accessible from Oracle Support's "Metalink" site.
"How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7".
Problem Description
Periodically an application running in the Enterprise Java Engine
(EJE) formerly known as the "Oracle 8i JVM", "the JSERVER component", or
the "Aurora JVM" will fail with a "java 2" permissions error having the
following format :
Note : Message shown below have been reformatted for easier readability.
java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception:
usually followed by a detailed error message similar to one of the following
messages :
Example # 1
java.security.AccessControlException: the Permission
(java.net.SocketPermission hostname resolve)
has not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
Example # 2
java.security.AccessControlException: the Permission
(java.util.PropertyPermission * read,write)
has not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
Example # 3
java.security.AccessControlException: the Permission
(java.io.FilePermission \matt1.gif read)
has not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
Explanation
The java 2 permission stated in line # 2 of each of the above "Examples"
has not been granted to the user specified in line 4 of the above "Examples".
Solution Description
The methodology to solve this issue is identical for all java 2 permissions
cases.
1) Format a call "dbms_java.grant_permission" procedure as described below.
2) Logon as SYS or SYSTEM
3) Issue the TWO commands shown below
4) Logoff as SYS or SYSTEM
5) Retry your application
For Example # 1
1) Logon as SYS or SYSTEM
2) Issue the following commands :
a) call dbms_java.grant_permission('SCOTT',
'java.net.SocketPermission',
'hostname',
'resolve');
b) commit;
Note: Commit is mandatory !!
3) Logoff as SYS or SYSTEM
4) Retry your application
For Example # 2
1) Logon as SYS or SYSTEM
2) Issue the following commands :
a) call dbms_java.grant_permission('SCOTT',
'java.util.PropertyPermission',
'read,write');
b) commit;
Note: Commit is mandatory !!
3) Logoff as SYS or SYSTEM
4) Retry your application
For Example # 3
1) Logon as SYS or SYSTEM
2) Issue the following commands :
a) call dbms_java.grant_permission('SCOTT',
'java.io.FilePermission',
'\matt1.gif',
'read');
b) commit;
Note: Commit is mandatory !!
3) Logoff as SYS or SYSTEM
4) Retry your application
References
For more details on java 2 permissions and security within the EJE, review
Chapter 5, in the Java Developer's Guide. entitled,
"Security For Oracle8i Java Applications"
The RDBMS 8.1.7 version can be found at :
http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/index.htmHi, Don,
I solved the problem of security exception I mentioned at java procedure topic as following:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.SecurityException
I tried to use your solution as following:
call dbms_java.grant_permission('SDE', 'java.net.SocketPermission', 'ORCL.COHPA.UCF.EDU','resolve');
but SQL*plus gave me a error message:
invalid collumn.
What's the problem?
However, I call a grant command as following:
SQL> grant JAVASYSPRIV to sde;
and then that exception is gone. What's the difference between dbms_java.grant_permission and grant command?
Thanks
Bing
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by don -- oracle support:
I'm in the process of publishing the following note (134280.1), titled "How to Resolve ORA-29532 Java 2
Permission Problems in RDBMS 8.1.6 and 8.1.7".
It will be accessible from Oracle Support's "Metalink" site.
"How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7".
Problem Description
<HR></BLOCKQUOTE>
null
Maybe you are looking for
-
Macbook pro retina late 2013 yosemite 10.10.2 wifi bluetooth both turned on same thing for apple tv a1469 and there isn't any network or internet connection. Macbook pro can see apple tv as a mirroring device but cannot connect to apple tv a1469. The
-
Tutorial on creating a CR webservice that serves up many reports?
I found this one, but it is very out of date: http://resources.businessobjects.com/support/communitycs/TechnicalPapers/crnet_serverfile_deployment.pdf Is there a newer version that shows how to work with the ServerFileReportService object?
-
Weblogic -Sybase Bridge driver Problem
I am using the weblogic server 6.1 (in production mode)with sybase anyware 6.0 and i am using the bridge driver to connect to database. I have tried using the own implementation of coonection pool and also the poool functionality provided by the webl
-
I've tried everything and still can't get my ITunes to work Please help Thanks
-
WLS 9.2 updateApplication() takes 2 parameters??
According to the API, updateApplication takes the name of the app to update and OPTIONALLY takes a new deployment plan and/or options. However, when I use the following command it throws an error: updateApplication('4X',block='true') where '4X' is th