Back to the Mod - 2015 Cooler Master Case Mod World Series

The future is a mystery, the past is history.
We do not have the ability to turn the clock,
We must make the most, with every shot.
Changing lives makes an impression,
For the only way to truly surpass the boundary,
Is to make sure that you leave something behind.
Modder - marcam923 - Marc Molella
Above you will find the preview sketch for my plan to accomplish this mod.

We start with the untouched case. I have had this case for a few years, the windowed side panel was an option from Cooler Master. We won't be needing that!  :D
Now we start the breakdown.
Now we have a bare case, and I am starting to layout what will be the new back panel. It will have dimension to allow for cable management, and mounting of all the internal components.
Next post will have some cutting into the frame of the case, as well as a couple videos! Enjoy!

Similar Messages

  • Cisco 2504 Local radius configuration, is their any ways for backing up the user db? In case the WLC dies

    Cisco 2504 Local radius configuration, is their any ways for backing up the user db?  In case the WLC dies

    Please find the guide to keep the backup:-
    http://www.cisco.com/en/US/partner/docs/wireless/controller/7.0/configuration/guide/c70mfw.html#wp1063850

  • Business messages are not pushed back to the aq exception queue in case of errors

    Hi,
    I have the scenario, where I have configured the business events in ebs and implemented the soa interface which consumes the event message from wf_bpel_q.
    SOA interface is able to pickup the messages succesfully and same message will be pushed back to the same queue with the status=READY in case of exceptions as well. Ideally as per default functionality of AQ, in case of errors, messages will be pushed to exception queue.
    Please suggest why mesages are not pushed back to exception queue in case of errror scenarios with the status='Errored'.  Please let me know what i have been missing here in the setup.
    Regards,
    Anjana

    Hi Anjana,
    I am not familiar with the SOA interface, so I can't help you in detail, but take a closer look to the following documents.
    Doc ID 1374461.1 ,  Doc ID 1075611.1 , Doc ID 1356146.1
    Maybe you hit a known bug ....
    Hope that helps.

  • How can I set RSBBS back to the mode 3.X

    Hi.experts:
        I found that if i use RSBBS to go back to R/3 for details,when I'm in analyzer,then the system jump to my portal for R/3 interface,but I just want to logon to the SAP GUI for detials,how to achieve that?
    Best Regards
    Martin Xie

    Bex Analyzer->Global Settings->Log on and Activate SAP GUI Connection

  • Why did you change the ipad to that crappy lightning cord.it does not stay plugged in to ipad to use it on ac power the cords short and overheat damaging the charger units. please change back to the old style.in this case newer is definately not better

    anyone else think the lightning cord as a piece of garbage

    I agree. It's much better than the old one.
    If your have a problem with something overheating, that's not normal. You should take the charger, cable and iPad to the nearest Apple Store. Is the charger an Apple charger or a third party one? Many of the third party chargers are badly made.

  • Re: [MSI PRO MOD] Back to the Mod

    That looks amazing :O

    So in February I bought an MSI GS60 2PC Ghost. The main games I play on it are Terraria, Counter Strike: Global Offensive, League of Legends, and GTA IV. Ever since loading up Counter Strike when I first bought the PC, I noticed an issue where the game...

  • Unable to change the Primary in a Team MVG for Master Case

    Hi,
    In the 'PUB Master Case' BC, I have configured the Team field to hold an MVG.
    Changes Done:
    In  "PUB Master Case" BC,
    The Team field is an MVF. I have changed the MVL from "Contact/Position" to "PUB Master Case/Position" which is identical to HLS Case/Position.
    Set the Business Component User Property: "MVG Set Primary Restricted: Position" to "False"
    Observation:
    The Business Component has 'BusComp View Mode' set with Owner Type 'Position' and Visibility MVLink 'Position'.
    The "PUB Master Case - Cases View" View has two applets "PUB Master Case Form Applet" and "PUB Master Case - Cases List Applet". Both has MVF 'Team' with "Contact Team Mvg Applet" as the Mvg Applet.
    "PUB Master Case Form Applet" belongs to "PUB Master Case" BC and "PUB Master Case - Cases List Applet" belongs to "HLS Case" BC.
    I am able to change the primary in "PUB Master Case - Cases List Applet"
    Issue:
    I am not able to change primary for the Mvg in "PUB Master Case Form Applet"
    What could be causing this issue?

    Hi,
    You configuration seem OK to me.
    Could you please try to get logs/sql? Would be more helpful to see what is happening in the backend.
    Thanks.
    Rajesh Kumar

  • MSI GTX 780 TI/R9 290x in the Cooler Master Elite 130?

    Hello
    I am intendet to assemble a very compact  and minimalist (only 1 SSD and only one LP Ram 8GB) Gaming PC
    But i dont want deny at all at one of those high end graphic card on the market now such as
    -MSI R9 290X2
    -MSI GTX 780 TI
    I like a lot a cooler master 120 or 130
    Is it possible to fit it in?
    consiering i will use an i7 processor and a mini itx  mobo.
    I read the specs of that case and the official web site claims that can host GPU up to 343 mm lenght
    What about the PSU i should get?
    How many WATT for my (future)components?
    -GPU (one of those i mentioned above
    -Samsung EVO 120 GB SSD
    -Corsair Vengeance LP (2X8GB)
    -Mother board M-ITX (i dont know wich one yet)
    -Processor intel i7 no overclocking
    Said that,how many WATT should i pick my PSU?
    Thanks

    it would be tight and you will need to be very creative with your assembly as space is very limited in those small form factor cases (I know as my HTPC has one of the 130 versions and its very tight to fit a card into the chasis but a large card does fit but the power cables are a little bit of a fiddle to get into the connectors as its a little cramped inside but its doable)
    AMD R9-290x2 is a upcoming card with dual GPU but that will not fit in the case due to its weird cooling system as there is no way you could route the water cooler I think!

  • I have an older 8GB iPod Touch no longer supported by tech. It is locked up in "Restore" mode and fails to respond to 2-button reset. I get the apple logo and then it pos back to the cord and disc icon for restore. Any advice?

    I have an older 8GB black iPod Touch (no bluetooth) no longer supported by tech. It is "locked" in restore mode. When I do a 2 button reset I can get the Apple logo but then it pops back to the synch cord-and-music disc icon indicative of restore. Any advice?

    Hello honeycrisp70,
    For that error, check out the article below for additional troubleshooting to get it sorted out. If it continues then you may need to contact Apple support. 
    Resolve iOS update and restore errors
    http://support.apple.com/en-us/TS3694
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Regards,
    -Norm G.  

  • I need to install photoshop cs4 extended from a disk to a new computer because my old computer had a hard drive crash. There is no serial number on the back of the case.  How can I obtain a usable serial number?

    I have to install Photoshop CS4 extended on a new computer from a disk because my old computer had a hard drive crash.  There is no serial number on the back of the case.  How can I obtain a usable serial number?

    Find your serial number quickly
    You can activate software without following up and registering it... at least that was the case in the past.  The serial number is normally located on the disc case or a box inside the main box.  If you did not purchase the disc from Adobe then it is possible you would have dealt with a redemption code, in which case it would have been up to you to keep a record of the serial number, especially if you did not follow up and register the software.

  • My ipod touch 2g a1288 wont restore. The download takes ages then ipod puts itself back in2 DISABLED mode, HELP!!

    Ok so my ipod is making me really angry. If I don't figure this thing out today after trying for so long I think I'm going to take my car and repeatedly run the thing over until its in a million pieces.
    Right now heres the long story which ill try keep kinda short but I do need to explain whats happened thus far
    Ipod touch (2G), Mondel: A1288 which has gone into disabled mode and is basically useless at the moment.
    Now I've done the thing where you hold the two buttons while plugged into laptop until itunes detects ipod in recovery mode. Then I try to hit restore, this starts up the download/ update thing which will not download because here in the dark ages of New Zealand our internet is slow. So because its so slow the ipod touch takes itself back into disabled mode! ahhhhhhhhhhhhh so FRUSTRATING
    Now I'm aware that I can pre-download the firmware (which will still probably take ages but may save the ipod from timing out and going back into disabled screen) and then just hit control and select it when ipod is detected in recovery mode by itunes. The only thing wrong with doing this however, is when I go to the site to get the firmware from http://http://www.felixbruns.de/iPod/firmware/ and look in the drop down menu of 2G ipod touches, I don't see my model listed there so I'm wondering what firmware I can download for the A1288? Is it compatible with a different version? because it wasn't even listed in the drop-down menu of ipod touches.
    I just wan't the thing going again! they put these things into technology that make it useless because they know the average joe like me will just give up trying to fix it and buy a new one. Well not this time, if I cant fix this, I'm going to run the thing over and that will be that!
    Many thanks for reading my speal, I hope somebody can help

    lol yea when i inserted the link i just copied and pasted thats why that happend... Lets try again... http://www.felixbruns.de/iPod/firmware/
    Anyways when I go to it theres a drop-down list and you select the one you want and I know the number next to it identifies the model but the thing is they don't have my model listed so my main question is, what version eg. 2.1.1. or 2.2.1 etc. etc. etc. etc. will work with my model of ipod touch which is the 2g Model A1288?
    Does anybody know? Does it work with any firmware thats for 2G ipod touches or do i have to get firmware thats model specific?

  • Ipod touch 5 - when in song suffle mode, a random album will suddenly appear on the screen and then it is difficult to get back to the song that is playing

    Just "upgraded" to a new ipod touch 5th generation after previously using various ipod classics.  So I am not familiar with all the ins and outs of the device.  One thing that I have a problem with is the fact that there does not seem to be a simple way, while in shuffle mode to quickly move to the next song or back to the prior song.  But forgetting that for a moment, here is my problem and I am trying to figure out if it is a bug or simply some kind of "feature" of the ipod touch that I don't get.
    I am playing music...in song - shuffle mode.  All of a sudden, instead of the particular song that is playing, a different album shows up on the screen.  Meanwhile, the original song keeps playing.  When this happens, sometimes that album then starts playing and sometimes I am able to move the ipod touch in various directions and I can get back to the song that I was originally playing.  Any idea what is happening here and how to stop it?
    Thanks for any help.

    Hello Philly,
    I believe that when you reset your ipod(command given from the computer, right?)  touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
    I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
    ~Remember, I am just giving an educated guess on limited information

  • Hi, my iphone 5 (latest software) has put itself into recovery mode all on it's own today AFTER I took video of my kids and easter egg hunt.  Is there a way to back up the phone prior to restoring it?New HDD (old 1 dead so no Bup)

    Hi, my iphone 5 (latest software) has put itself into recovery mode all on it's own today AFTER I took video of my kids and easter egg hunt.  Is there a way to back up the phone prior to restoring it?New HDD (old 1 dead so no Bup)

    Thanks Chris   The phone has been great until this morning.  When using the camera it seemed to shut down, then it was just looping the restart, and finally into recovery   It never rains but pours   Thanks anyway
    BTW, the phone has never been jailbroken or anything.  Stock standard

  • My iPhone seems to be in visual impaired mode, and the touch screen no longer works.  How do I get back to normal mode?

    My iPhone 4S seems to be in visual impaired mode, and the touch screen no longer works.  I have tried rebooting the phone without success.  How can I get back to normal mode?

    I solved my own problem by clicking the home button 3 times.

  • Iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?

    iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
    the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this  and not loose what is on the phone at all?

    Hi, simonRM.  
    Thank you for visiting Apple Support Communities. 
    I understand that you are unable to restore your iPhone.  Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
    If you can't update or restore your iPhone, iPad, or iPod touch
    Resolve iOS update and restore errors in iTunes
    -Jason H.  

Maybe you are looking for