Back too XP OK I give

Back too XP ::: Could not stand the sound coming out of my 300 dollar speakers and 200$ sound card ,OMG! creative,Nvida,Asus ,all of them DRIVERS JUST S..K ASS,with vista ultimate

I wish the CL team in charge of driver development did the same efficient job that the moderators do! (they remove posts to competitor's sites very efficiently!)
Don't get me wrong, I understand the forum's rules and I'm not complaining about the moderators, I'm just saying if the CL driver team was that fast, we wouldn't be complaining about CL's lack of product support! LOL!!!!!!!

Similar Messages

Hello, I have a Windows 7 Pc where Lightroom 5 is on installed. When I open a photo using " verkenner" I see a good coloured photo. When I open a photo via Lightroom 5, the photo will be too dark. This gives difficluties during shaping the photograph. C

Hello,
I have a Windows 7 Pc where Lightroom 5 is on installed.
When I open a photo using " verkenner" I see a good coloured photo.
When I open a photo via Lightroom 5, the photo will be too dark. This gives difficulties during shaping the photograph. Can someone help me to solve this problem?
Kind Regards,
Marianne

Into the Develop module Not all the sliders in the Basic Panel are at 0.
Temperature ° is on 5600
Colourtint is on + 30
Balans: slider in the middle
History panel:
Balans gespitste tinten -3 0
Balans gespitste tinten -3 3

Audio books play back too fast on iPad

Audiobook play back too fast on iPad .Ok when played back computer have tried re setting iPad and adjusting speech speed

Have your rebooted/restarted your iPad? you do that by pressing the Home and power/sleep button at the same time until the slider to power off the iPad appears. Slide the slider and when screen activity stops depress the two buttons again until the Apple logo appears. When the iPad completes rebooting try again to see if that solved your problem.

Screen goes to black when tilted back too far...anyone else had this issue?

My ibook has started this crazy new thing. The screen goes to black when tilted close to all the way back. It's not that big a deal, but I was wondering if anyone else has this issue and if it possibly will get worse. When it happens, I just close the lid, let in go into sleep mode, then open it back up touch a key and all's well, I just have to be careful not to lean the screen back too far. In the past, I've had to send it back twice for the logic board to be replaced and as much as I love Macs, I really feel this is not a well-made product. Thanks for any advice....
Message was edited by: LBrandon

Hi, and welcome to Apple Discussions.
As the old joke goes about the guy who went to the doctor and, raising his arm, said, "Doc, it hurts when I do this." And the doctor said, "Well, then, don't do that!"
Yes, it is a familiar thing to happen to an iBook. The backlight cable can get pinched in the hinge, causing it to go off at certain angles.
You can read more about it here:
http://discussions.apple.com/thread.jspa?threadID=207731

HT3986 when starting up in windows the screen resolution is too large ,i then restart in windows and resolution goes back too normal

When starting up windows from mac the resolution is too large, i then restart in windows and the resolution goes back too normal. How do i fix this?

Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?
The notice is inserted first and the stopping point is second.

Da ich gar kein Englisch kann kann ich auch nicht sagen was sie mir
geschrieben haben ich kann nur Vermuten was das sein soll es tut mir leid
aber ich kann ihnen keine Konkreter Antwort geben alle Sprechen Englisch
nur ich nicht mehr kann ich dazu nicht sagen
Constantin Preda
2015-02-12 21:45 GMT+01:00 Claudio González <[email protected]>:
The install wizard stops and "rolls Back" the install and just gives
the attached notice of the install error...how can this be corrected?
created by Claudio González
<https://forums.adobe.com/people/Claudio+Gonz%C3%A1lez> in Adobe Reader
- View the full discussion
<https://forums.adobe.com/message/7189357#7189357>

Back button does not work with some web sites to return me back too Firefox main page after concluding business on site.

After connecting to a web site and completing tasks, I use back button too return too Firefox main page. After using back button to get back to the original site log in page the back button (after repeated uses) will never get me off the web page and back to the Firefox main page. At this point the only way too get back too Firefox main page is too shut down Firefox wait 60 seconds and restart Mozilla-Firefox.

Some web pages are coded to redirect you forward to another page. In that case, when you go back to the page, Firefox redirects you forward again.
To bypass this, use the history drop-down next to the back and forward buttons. The drop-down has the most recent pages on top, and older pages below. Jump as far down the list as you can, then repeat as needed to get back to the first page.
Does it work?

HT4528 I accidentially restored my iphone back too far, can i get what I have lost? Pictures, contacts?

I accidentally restored my phone back too far. I lost all current photos, contacts, and important information. Please tell me there is a way to get all of this back.

That would depend if you have a backup that has your current data.
If you're using itunes, you can go to edit-preference-devices - and see if you have any current backups.

Dynamics audio effect glitchy. Audio plays back too softly.

PP 7.1.0
Mac OS X 10.8.4
Basic timeline. Three tracks of audio. One of the tracks is playing back VERY quietly. This track has a dynamics effect applied, with only the "limiter" function checked on (at -3db). Audio on this channel plays back too softly. A restart of premiere fixes the problem for a few moments, but then its back to soft again. Playing the clip in the source monitor plays it back at the correct volume. Turning the effect off altogether also plays the audio at the original (louder) volume - albeit minus the limiter. The waveform itself is plenty loud. But when the effect is engaged, the clip suddenly plays back about 15db quieter than it should.
Any ideas?

Hi T-MACK,
This may not be much help but I had the same problem. Inspection showed that I'd inadvertantly set the camera on long play when shooting the footage. It seemed fine when importing into imovie but playback appeared to be double speed. I posted a question on this forum but couldn't get a satisfactory solution. Re-setting the camera and reimporting didn't help. However, I borrowed a friends camcorder and reimported the same video from that. It worked. I can't see why but it did.
Perhaps sommeone will come up with a better answer.
Regards
Rob

H264/ACC Stream plays back too fast on some computers

Hi all,
we got some feedback from some of our customers (about 1%) that the QuickTime streams we provide (H.264/ACC) play back too fast, about double the original rate and sound is dropping out.
I have not seen this problem myself and there is no particular movie, which does not work. It seems to be the client setup (QT settings, video card whatever).
Does anybody know what happens?
Thanks
NikWest

Hi T-MACK,
This may not be much help but I had the same problem. Inspection showed that I'd inadvertantly set the camera on long play when shooting the footage. It seemed fine when importing into imovie but playback appeared to be double speed. I posted a question on this forum but couldn't get a satisfactory solution. Re-setting the camera and reimporting didn't help. However, I borrowed a friends camcorder and reimported the same video from that. It worked. I can't see why but it did.
Perhaps sommeone will come up with a better answer.
Regards
Rob

[ASUS UX Series] *ERROR* too many voltage retries, give up

Hello,
I get the following errormessage when booting my UX32VD:
"[drm:intel_dp_start_link_train] *ERROR* too many voltage retries, give up"
What does this mean? Kernel: 3.14.1-1.
Last edited by Lax Lexis (2014-04-27 15:37:01)

I have the same issue, as do others; see https://bbs.archlinux.org/viewtopic.php?id=177595. But I haven't found any answers anywhere, nor any real cause for concern.

Time Machine stopped backing up but doesn't give warning/error

Hi,
by chance I noticed, that Time Machine doesn't backup up any more, but still doesn't give errors. In Console I see the following for a now typical run:
21.04.15 09:58:11,493 com.apple.backupd: Starting standard backup
21.04.15 09:58:12,043 com.apple.backupd: Backing up to: /Volumes/drosera-backup-02/Backups.backupdb
21.04.15 09:58:41,729 com.apple.backupd: 5.18 GB required (including padding), 96.84 GB available
21.04.15 09:58:55,149 com.apple.backupd: Copied 23 files (93 bytes) from volume Macintosh HD.
21.04.15 09:59:04,385 com.apple.backupd: Copied 36 files (93 bytes) from volume DATA.
21.04.15 09:59:06,100 mds: (Error) Volume: Could not find requested backup type:2 for volume
21.04.15 09:59:06,102 com.apple.backupd: Starting post-backup thinning
21.04.15 09:59:07,668 com.apple.backupd: Deleted /Volumes/drosera-backup-02/Backups.backupdb/drosera/2015-04-20-183344 (24.0 KB)
21.04.15 09:59:07,668 com.apple.backupd: Post-back up thinning complete: 1 expired backups removed
21.04.15 09:59:07,762 com.apple.backupd: Backup completed successfully.
The 5.18 GB are never backed up. The backup drive (drosera-backup-02) is attached by FireWire. I have checked the disk with First Aid, I have disconnected and reconnected it. I removed the backup disk from Time Machine, stopped TM and reconfigured. I stopped mds, ran backups and reenabled mds. All to no avail.
I am at a complete loss and I'd appreciate to get this running w/o having to remove all existing backups. Any ideas or pointers?
I'm running Mac OS X 10.7.5 on a Mac mini
Cheers
Frank

Thx. I had already tried the hints from mds: (Error) Volume: Could not find requested backup type:2 for volume to no avail. Your tip to rebuild the Spotlight index would probably helped, too. But just before getting yout comment and after reading http://pondini.org/TM/Works.html and http://apple.stackexchange.com/questions/69054/force-time-machine-to-perform-a-d eep-traversal I had simply removed /.fseventsd and reran a backup. That seems to have fixed the problem (at least for the time being).
Interesting side note: During the non-backup phase I created a new account on the Mac and ran TM. This triggered a one-time working backup of the whole system, but all subsequent backups again failed silently. Additionally the externally attached FireWire harddrive was always backed up correctly, only backups of the local drive failed.

How to set ID-CS4 color to adjust when proof came back too black

We published a colour book in 2008 using a conventional printer in Singapore. Then we had the US/UK version done using Lightning Source in USA. The LS colours in photographs came back a bit too black, perhaps with a bit too much green as well, and also less saturated due to the uncoated paper. Now we are looking at a second edition of that book using LS. So, it's time to try to get it right.
We calibrated an HP LP2475W (Win 7 pro) and have been able to get a close match with the book colour using Colour settings. Now the monitor colours of the ID file (ID-CS4 V 6.0.4) look as "off" as the book.
Is it possible to make changes to the book images as a whole, or do we now need to use Photoshop to tweak every single image (over 400 of them)?
Our objective is to get better colours in print form which means we may get it, now that the monitor seems to display WYSIWYG. If it is possible to change an output setting rather than tweak each image, we would appreciate recommended settings using simple English or even print-keys; please presume our knowledge level is lower than this forum's membership and industry jargon and deep colour knowledge will go over our heads.
Also, is there a step-by-step explanation of each element in colour settings that is designed for managers (meaning people who are not the professionals, but who supervise the staff)? We seek to understand the variables that gave us the off-colour results in the beginning. Our managers know when the result is not good, but they need to know enough to give the staff the right instructions to get it right. In this request, we seek documentation or a web site that does not presume the viewer is an experienced Adobe designer or a colour-experienced printer.

The precise answer is this: You need someone who understands colour management. You need images that are made correctly and give them to that person to prepare the book.
If the images are not good or do not contain necessary colour management information, you need someone with colour skills to adjust them and apply correct colour management profiles.
Your colour management guru can then prepare a print file using the correct settings to suit the target print house.
If your job is supplied with incorrect settings, you will not get a correct output, no matter how correct the print shop's workflow is. (settings are specific to the printery)
Many people come here asking the same thing, many assume that colour management is largely automatic or logical, it is not! Most assume that if their images look good on screen they will reproduce well, which is also incorrect. Sadly we cannot teach a complete workflow in this forum (although we sometimes try) because there are too many variables and there is a massive amount of knowledge to impart to people who often have no previous background and it is an impracticable task for them to accomplish in order to complete their current job and they get frustrated.
If you can either pass the job to someone who knows the routine or get some first hand help from such a person, you can control the job, if not, you will probably be frustrated by the multiple variables in the job creation process and sometimes indifferent support from printeries (especially offshore).
I deal with jobs like this daily and it has taken me many years to be comfortable in sending a 'coffee table' job with total confidence. I allow myself a rate of about 10-15 images per hour to adjust and check, so 400 images is the best part of a week's work but after that I would send to a reputable printer and get almost exactly the same result I get on my local calibrated proofing machine (not monitor!).
If you send a job with incorrect or missing profiling, you will blame the printer in your mind but it would not really be their fault, because if the images are correctly prepared and the printery has a correct workflow (most do), the job will be perfect.
Having said that, you could try learning the whole process, but the chances of getting it all right on job number one are very slim, due to the difficulty of the task and the dearth of accurate and clear instructions in the applications or on the web. (there are also many subjective judgements made in adjusting the images that you can only learn by practice over thousands of images!)

Recording iSight Video plays back too fast in Adobe Presenter/Office 2010?

Adobe E-Learning Suite 2.5 installed over Microsoft Office 2010 Home and Student
Running Presenter within PowerPoint detects and records using iSight. But the Playback is too fast, chipmonk like.
Perhaps its an FLV codecs issue.
Running Bootcamp 3.2 Software on Windows XP SP3 on an Intel iMac Core 2 Duo 2GHz 1,5GB Ram

Hello,
Do you mean that when you see the video inside Video Creator, slide 10 appears for a split second and then jumps to slide-11?
Can you record the same scenario in diagnostic mode and send us the logs.
Follow these steps -
1. Close Video creator if it is already opened
2. In Windows > Programs > look for "Troubleshoot Adobe Presenter Video Creator"
3. Launch the same and record the exact same steps
4. Stop recording > Ensure that the issue has been reproduced.
5. Close the application.
6. While closing, it will prompt you to send us an email with collected log reports.
Kindly send the logs. We will go through it and get back to you.
It will also be great if you can send us the presentation in which the issue is reproducible.
Regards,
Mukul

Would you like to get the iOS 5 Appstore back too?

Well.. after updating from iOS5 to iOS6 I'm really unhappy about losing the old iOS 5 Appstore.
The new one is unstable (it crashed often on my iPhone 4, although I restartet it a few times and let it turned off for a few minutes) and the new view is much more uncomfortable than the older Appstore. A hole site for one App? Thats much too much. And the flow-animation from one to another page is a bit laggy.
I wish we'd get the old appstore back.
Greets
Okkarator

I'm not getting the message anymore!
What I did:
1.- Went to preferences in itunes/ Devices --> erased the corrupted backup (there were two backups)
2.- Upgraded to iOS 5.0.1
Done!
PS: Maybe upgrading solves the problem without erasing the corrupted backup

Back too XP OK I give

Similar Messages

Maybe you are looking for