Back up Authentication Error

VNI Authentication error message appears when submitting a Backup Job in the OEM

Ok - cracked it.
Changing user's permission on the hard drive of the computer didn't help.
So I looked at user rights on the back up drive (is that what you meant anyway?) and there were none shown - so I changed them to full rights and back up went ok.
So ..... if you meant to check user rights on the back up drive, and I have now changed user rights for all users on the computer hard drive (drive C) then have I created problems for myself (there seemed to be a lot of scary warnings about reducing security etc).
In practice this is a home computer only used by me and my wife (unless a technician has to repair it etc and they no doubt have the knowledge to do naughty things if they want) so unless the user right changes cause operational problems there won't be any security etc issues (will there??)

Similar Messages

"Authentication error", making disk image

I'm trying to make a disk image of my OS X boot disk, as an emergency backup. I'm booting from the Installation CD that came with my Mac Pro, and using Disk Utility. I select my boot drive, click New Image, and tell it to save to an external firewire drive, compressed and encrypted. It starts and quickly errors out, with "Authentication error." What does this mean?
I've used 250 GB of the 500 GB on my boot drive, and my external drive is 120 GB. I'd rather tell it to skip some files to save space, but it doesn't give me the option to do that. Will "compress" get it to be small enough? Is this why I'm getting an error? I've repaired permissions before booting from the CD.

I don't know about the authentication error; however, to make a disk image of 250 GB source drive to a 120 GB target is an exercise in futility. There's not enough room. 250 GB? What are storing? A complete music store, the movies of Hollywood, or the pictures in an art gallery?
If you want an emergency backup of your 500 GB HD, then you'll need an external at least as big. BTW, making disk images for this purpose is fraught with danger since you can't ensure that it's good until you restore it to a bootable HD. I strongly recommend something like Carbon Copy Cloner, SuperDuper!, etc. instead. BTW, you can just drag & drop any data files from one HD to another. There's no need to put them in a disk image and certainly no need to encrypt things. If you decide to go the bootable backup route, move the data files to root-level and don't back those up. That should make your emergency backup a lot smaller.

Authentication error on Linksys RE6500

Hello, i am from holland.
My setup Ubee EVW 320B set up as bridge, hardwired to the linksys EA 6900 and trough wifi connecting to Linksys RE6500. After the setup everything works great but, after a while if you are in range of the extender all the devices (laptop, Mac book, Ipod, iPhone, Ipad) will loose connection and it says authentication error. (verificatiefout in dutch) Can some one please tell me what is wrong? the range extender is in good range of the EA 6900. Already went back to the store and got a new RE 6500 because i thought it was broken but the new one is doing the same. All firmware is up to date on the devices
Greetings Erik

The authentication error message is unusually. Can you provide more details on that?
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Authentication error when I try to make encrypted disk image

I usually make an ecrypted disk image when I back up my financial files on my Powerbook g4 or flashdrive. Just recently I get a "cannot make" "files" - "authentication error". I've tried the single user mode and removed files as per the discussion boards to no avail. I've tried also to reset my password from the OSX disk. Any suggestions. Thanks

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

Authentication error with sudo

Hi there. I just tried using Carbon Copy Cloner (2.3) to clone my HD before updating to OS 10.4.9. I got this error: authentication error: sudo: /private/etc/sudoers is zero length
I booted to my old cloned drive and repaired permissions and the hard drive with my system on it. I also created a new user with admin privileges and tried it, and got the same error. I don't think it's a CCC-specific error because I got the same error when I tried to use Preferential Treatment to check for corrupt preferences.
Can anyone tell me how I might go about fixing this? I'm a longtime Mac user but don't know too much about Terminal and its uses. Help?
G5 dual 2.0 Mac OS X (10.4.7) 2.5G RAM, Radeon X800 XT video card

Thank you for looking, but I solved the problem by copying the sudoers file from my cloned drive back to my main drive. It was invisible, but File Buddy solved that problem.

Unsolvable Screen Sharing Authentication Error

Here's my scenario...
I have three Core2Duo iMacs (Let's call them "A" "B" and "C") on a local appletalk network all communicating fine in all directions via an Airport Extreme base station.
When it comes to logging into each machine via file sharing, I have no trouble accessing any machine from any other machine.
HOWEVER,
When I attempt screen sharing over the network, this is my result.
Computer "A" can access the screens of "B" and "C",
Computer "B" can access the screens of "A" and "C",
Computer "C" can access the screen of "B" but not "A"
When I attempt to log into Screen sharing from "C" to "A", I get the following error message:
*+Authentication failed to "NameofComputer"+*
*+Please verify you have entered the correct name and password.+*
I have turned screen sharing on/off, restarted, etc, but it doesn't fix that one issue.
Now, to add to the strangeness, when I access computer "A" via computer "B" through file sharing, I can see all of my drives, including an externally connected hard drive that I use for storage.
BUT, when I connect from "C" to "A" via file sharing, all of my user areas and native partitions show up, but the External drive does NOT.
Does anyone have any suggestions other than archiving and reinstalling Leopard? AND, any idea which system even has the problem? The authentication error responds so quickly that I somewhat think that authentication is not even being attempted from "C" to "A".
Any help is REALLY appreciated!
Thanks,
Chris

Here's just a bit more info. I created a new user on the computer that I noted as "C" and under the new user area I was able to connect to computer "A"; however, when I switch back to the original user, it still will not connect, so now I know that the problem lies somewhere in "C".
I deleted my screen sharing prefs, but that made no change.
I have verified that the sharing and network settings are consistent across all three machines.
Could there be another preference file I should attempt to delete to see if I have a corrupted preference?
Thanks again,
Chris

Pdp authentication error on iPad3

Why is my APN telstra.corp setting coming up with a pdp authentication error.
I am trying to connect to our secure network via telstra.corp. When I use a 3G USB modem, I have no problems, as soon as I set the same config in my iPad I get the error. I have sat for over an hour with a Telstra engineer and he can't see my iPad even trying to access our radius. What is going on????
I have heard that the iPad can not pass the @ sign found in the username (username@domainname) through for security authentication, is this true?
If it is, how do I get around this.
Any suggestions would be helpful.
Thanks.

Same issue. Sitting here in Europe (Germany) trying to do some work. From the Support technical discussions, there are numerous complaints like this. Went by T-Mobile twiice already; they point the finger at Apple. (I'm sure I could call back to the USA and sit on hold for an hour, with most likely Apple blaming the telco's.) Not very impressed to say the least. Wonder how Android is doing in this regard ...........?

On Hold - Authentication Error - Printing in OS X Lion

Hi all,
I am trying to print to a shared windows printer and keep getting an 'awaiting authentication error', with the print job pausing.
I shared my printer successful with a PC running vista (to which the printer is attached) but since upgrading to Lion, I am no longer able to print. When a job is sent to the printer, it processes and then a pause button appears on the printer icon, with the message 'On hold authentication required'. When I click resume, I get a pop up which asks me to enter a login and password. This information is my username and password for my login to Windows. I 'Connect as – Registered User'. When I click enter, the system thinks for a moment and the job then goes back on hold with the 'On hold authentication required'.
I have tried removing and reinstalling the printers, using different printers (connected to the same Windows PC), changing settings in CUPS, all for no result. This has only happened since I upgraded to Lion. Snow Leopard gave me no printer problems at all.
For the record, I have a 2011 Macbook Pro i5 13" with 4Gb of ram. I am printing to a Windows PC running Windows Vista over a wireless network (the Windows PC is connected via ethernet to the router). I am (trying to ) printing to an HP LaserJet 1006 and/or HP Photosmart C5280.
Anyone got any answers, I have done a search and others have the same problem, however, no offered solution seems to work.

Thank you very much! It works!
willemsst wrote:
I solved my problem. I can print again. I've found an other thread(https://discussions.apple.com/thread/3193344) where they suggested looking in the keychain (just open the 'Keychain acces' application).
So what I've done:
I removed all references in the keychain to the windows computer or printer. (I guess removing one too many won't do any harm. If the username/password is needed again, you'll be asked for it).
I removed my printer and reinstalled it
In CUPS management (http://localhost:631), I changed the DPI explicitly to 300x300 instead of default (see manage printers, default options)
And that was it. I printed, was asked for my windows credentials one more time. I entered them and all is fine now. Let's hope it stays that way.
I hope this can solve your problem as well.

J2EE agent deployment failed due to authentication error

Hi All,
I had deployed java agent long back in weblogic domain, and was able to connect and execute odi scenarios using this java agent.
Recently i have changed masterrepository password and as well SUPERVISOR password. While starting agent application in weblogic domain geting following error.
I have placed encoded password of these two in odiparams.sh also.
[HTTP:101216]Servlet: "AgentServlet" failed to preload on startup in Web application: "oracledi". ODI-1404: Agent OracleDiAgent start failure: an authentication error occurred while connecting to the master repository, at oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:233) at javax.servlet.GenericServlet.init(GenericServlet.java:241) at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539) at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976) at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950) at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869) at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126) at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512) at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200) at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27) at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409) at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58) at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161) at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844) at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253) at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) :oracle.odi.agent.logging.logFramework.OdiAgentException:ODI-1404: Agent OracleDiAgent start failure: an authentication error occurred while connecting to the master repository,
Please help me,
Thanks in Advance,
Kumbar.

Hi Guru,
In weblogic domain ,for the data source odiMasterRepository the password is corrected and restarted itmes required.where else i can correct the masterreposiry credentails.
Whle adding domain credeintals into weblogic ,i had run followings
connect('weblogic1','weblogic88','t3://localhost:7001')
createCred(map="oracle.odi.credmap", key="SUPERVISOR", user="SUPERVISOR", password="sunopsis", desc="ODI SUPERVISOR Crendential")
createCred(map="oracle.odi.credmap", key="odidomain", user="weblogic1", password="weblogic88", desc="WLS credentials")
exit()
Now my master repository password and supervisor password got changed,
How to correct the supervisor password in WLS credmap. if any command is there plz share me.
Thanks,
Kumbar

When I try logging onto YouTube on my iPad app it says authentication error I have tried everything including disabling the app, turning of my wifi etc. I know I have the right password because on my computer it works fine what should I do?

When I try logging onto YouTube from my iPad app it gives me authentication error. I have tried everything, including turning off my wifi, and turning back on, as well as disabling the app. I know I have the right password because it works fine on my computer. What should I do? Thank you for your help

no they are already in mp3 format I just tried that home sharing today because I couldnt find any other reason why they werent syncing. here is an example of a sync I just tried. I made an mp4 concert into an mp3 it came out perfect on my computer.. then I tried to sync it to my ipad with no luck, other than it going on my computer, it did not show up anywhere on my ipad in any area of the music sections etc playlists, songs, albums etc. Its just not there but remains on my computer. thats why I tried the home share today to see if that would help. Either I am really missing something or there is something wrong with this ipad. Did you ever have any trouble like this, does anyone? and what is something good to try? thank you again for answering! I appreciate it.

SNMP Authentication Errors

Hi,
Ciscoworks (LMS 3.2) is gererating SNMP authentication errors for some of our devices (5 out of 838). The typical trap message is as follows:
Authentication Failure - "[1] authAddr.0 (IpAddress): X.X.X.X [2] snmpTrapEnterprise.0 (Object ID): 1.3.6.1.4.1.9.1.614 " Where X.X.X.X is the Ciscoworks server.
I have confirmed the device credentials are correct in Ciscoworks. I have deleted and re added the devices to the DCR. I have backed up and restored the RME database. I have reinitialised the RME database and I have deleted the devices out of DFM.
What else can I try?
Thanks,
Ian

Does the timestamp of the authentication errors match with the time of the scheduled discovery?
Discovery may cause these errors when it tries different community strings to talk to your devices.
By limiting the community string used to know IP address ranges amount of errors can be reduced
10.*.*.*
172.[16-18].*.*
2001::1234:5:6:*
192.168.1.1
For each community string you can set a target IP address range
Cheers,
Michel

Authentication error when trying to connect to home WiFi

My Galaxy 3 won't connect to my home wireless. I've entered the correct SSID and authentication method, I've removed the connection and re-established it, I've rebooted the phone, etc. I do not have this problem accessing WiFi anywhere else. If it matters, the home service is Comcast--and it's the exact same modem & general service as my daughter has, and I have no problems accessing her WiFi.
This question or similar has been asked before, but it looks like no one has been able to answer it so far. I'm hoping that a new discussion might find someone out there who has figured this problem out and fixed it.
Thanks,
Suzanne

I am having the same exact problem. Up until a week ago my Galaxy3 phone automatically connected to my home network whenever I was in my house. All of a sudden, my phone powered off and when it came back up I no longer can connect to my home network. It will work with any other network outside of my house. I tried all the same things that you did including powering off my modem etc. My home computer and tablet are all fine. My husbands Droid X phone still works. Everything can connect to my home modem except my Samsung Galaxy3 phone.
I don't know what happened buy every time the phone tries to connect to my home modem, it gets an authentication error message. When I look at the settings, it looks like the IP address is missing. The phone won't let me "forget" or remove the address. I have tried countless times. I also can't add the IP address manually...there is no way to do this. I would appreciate Anyone helping. It's very frustrating. Did you ever get an answer?
LMK..thanks
roberta

How to fix authentic error in game centre of iPad mini?

How to fix authentic error in game centre of iPad mini?

Following further research, this keyboard lag issue appears to be related to the (botched) iOS 7.1 update. It's good to know I am not the only user who had his iPad mini rendered unusuable by the iOS 7.1 update, however that does not solve my problem.
Anyone out there who has further suggestions (except doing a factory reset via iTunes)?

Remote Desktop Connection - Authentication error

Hello,
I wish to connect to my work PC from my laptop. The remote desktop connection was working fine till yesterday, but today i receive the following error when i try to connect -
"An authentication error has occurred. The Local Security Authority cannot be contacted. Remote Computer: <name>."
I have Win 7 ultimate installed on my 32 bit system, and have tried solutions proposed in the other threads. I do not require a NLA check for connection, i have always used the remote desktop with this option unchecked. Could anyone help me with this please?
Is this a error on my Laptop, or do i need to contact the network administrators for this?

Hi!
It could be as easy as you need to change your password on your domain accout.
Are both computers connected to the same domian or is your work computer connected to a domain and your laptop connected to a workgroup?
If your password has expired, this error can occur, so I would start to check that since it stoped working over night.
Best regards
Andreas Molin

Query: Authentication Error while consuming a web service

Hi All,
I've generted a WSDL file by using the following steps.
1.Created a RFC enabled ABAP pgm
2.Created a web service out of it (using webservice creation wizard - default virtual host. so my port is 8100)3.Released the web service (WSCONFIG)
4.Generated the WSDL file (WSADMIN + CTRL F1).
Then I wanted to consume it from a .Net program. But am getting authentication error in .Net.
Do I need to configure anything for Authentication (username and password) from R/3 side?..
How Do I pass the credential info from .Net?.
Should I take care of any setup other than what I've specified?.
Any Blogs or response would be appreciated.
Thanks,
Joe.

Usually like this:
WSReference1.WSPProxy proxy = new WSReference1.WSPProxy();
proxy.Credentials = new System.Net.NetworkCredentials("Username", "Password");
proxy.PreAuthenticate = true;
proxy.CallMethod();

Back up Authentication Error

Similar Messages

Maybe you are looking for