Back Up Data Windows XP
I am trying to back up my songs that I purchased at I tune Store to DVD Media and I keep getting an error message Error 261? Also, I need to know how to back up and keep my Artwork for later recovery. Should I use the Data CD setting?.
Already tried to back up to a DVD and it started and then the computer spit it out and it was runed so I had to throw it away. Can't keep this up too expensive to keep trashing DVD's .
Please help!
Any advise it appreciated.
Yes I am running the latest version of I tunes. If I can't back up my songs and Artwork what is the point of purchasing anything more from I tunes store.
As a paying customer I get a little upset becasue I have a lot of songs that I purchased and need to keep them backed up. I have a HP Media center and it's important that my files can be restored in case of a failure.
Similar Messages
-
Back up data from Windows 7 OS to Airport time Capsule
Hi Can anyone advice how to back up data from windows 7 laptop to Airport Time capsule
You need a suitable backup utility.. in home version.. microsoft backup cannot use network drives.. thanks for the product differenatiantion Bill.. very helpful.. nobody who has a home version windows would ever want to back up to a network drive would they. It is obvious.
Macrium Reflect is one I have used. Free version fine for full disk but you need to pay for incremental.
Genie time line.. there is also a free version might be ok. -
Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?
Hello Noushin,
It sounds like you are unable to see your contacts in the phone, but have confirmed they are still at http://www.icloud.com. I would next try these troubleshooting steps from the article named:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
If you're using iOS 7, quit and restart the Contacts app on your iOS device:
Press the Home button twice to see preview screens of the apps you have open.
Find the Contacts preview screen and swipe it up and out of preview to quit the application.
Tap the Home button to return to your Home screen.
Wait a minute before reopening the Contacts app.
Turn iCloud Contacts off and back on:
Tap Settings > iCloud.
Turn Contacts off. Choose to delete data only if your data exists at icloud.com/contacts and on one or more of your devices. Otherwise, choose Keep Data.
Wait a few minutes before turning Contacts back on.
Restart your iOS device by holding down the Sleep/Wake button and then swiping the screen when prompted to power off. Then turn your device back on. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Thank you for using Apple Support Communities.
Regards,
Sterling -
please help...we updated ipod2 4.1 to IOS 5.1 at itunes...after it was finished only the contacts were restored...not the music & videos...iwe found the backed up data in the pc(windows 7)after entering %appdata%..pls help on how to restore...we will appreciate it very much....thanks! God bless!
The iPod backup that iTunes makes does not include synced media like app, music and videos. Thus, you wll have to resync those back to your iPod.
If necessary you can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Where does iPhone store back up in Windows?
Sorry if this is in wrong place.
Where does the iPhone store the back up in Windows?
Thanks a ton!XP:
C:\Documents and Settings\USERNAME\Application Data\Apple Computer\MobileSync\Backup
Vista:
C:\Users\USERNAME\AppData\Roaming\MobileSync\Backup
Note that you may have to enable viewing of hidden folders/files. -
I have a external back-up that my iMac (10.6.8) won't mount. Is there a way to mount without intializing and losing back-up data? I used time machine to back-up to a Seagate Go-flex hard drive. I get a message from my iMac that says it doesn't recognize this drive and wants to initialize. Hope someone can help.
Try connecting the drive to a Windows machine, then ejecting. If it won't eject properly, restart the Windows machine, and try again. Then try connecting it to the Mac.
-
Why when I use the back arrow the window disappears?
I don't like Safari for other reasons. Now all the sudden I am having trouble with my windows. Its like I have lost the ability to navagate. Now when I press the back arrow the window disapepars. I only use Safari because I have a MAC. Firefox is much better and I use it more. I hope that I am just confused. It Safari becomes harder I don't know what I will do.
The back arrow by itself shouldn't do anything in Safari, unless a text-entry field is active.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
this is my first mac product and i want to restore my backed up data from my forma PC to my new mac. how do i do it?
Migrate your Windows files or system to your Mac
-
User confusion on migrating backed up data following reinstall
My MacBook Pro, Mac OS X (10.6.8) was going slow. I decided to reinstall OSX. All my data was backed up to my compatible external HD.
I then erased my MacBook HD, and reinstalled OSX off the install disc and bundled applications disc. I went through the steps to set up the administrator account, and did all the other things in the instal process. I then did all necessary software updates.
When all that was complete, I connected my external HS and opened migration assistant, and imported all the data from the latest backup.
I now find that all my backed up data from before is under a different user account - named as in the old OSX set up.
How do I populate my newly installed iTunes and iPhoto with the imported data stored under the 'old' username?
Shouldn't this have happened automatically?I'm not a whizz with iPhoto, in fact I rarely use it, but you can try first finding the iPhoto Library and checking that all the photos are there. You'll find that in your home folder (house icon) > Pictures > iPhoto Library.
That looks like a single file, but it's actually a package, so right-click (or ctrl-click) on it and choose "Show package Contents" from the context menu.
In the new window that opens, locate the Originals folder. Your pics should be there, probably in lots of sub-folders by year, month etc.
If they're all OK, try opening iPhoto with the opt key held down. Keep the opt key held until a box appears asking if you want to create a new library or use an existing one.
Choose the existing one and point the application to it.
Hopefully that will do it.
Otherwise we need someone who knows more about transferring iPhoto between drives. -
My new Iphone 4s using the Icloud, will not push calendar changes back to my windows 7 laptop Outlook 10. It does perfectly push calendar changes from my laptop to the iphone, but it will not work the other way. We've checked the box in Itunes that says "sync the phone using WIFI" per the instructions from the Apple support people. any great ideas?
"Ok, new info. This gets better and better.
In OL2010, the Calendar in the navigation pane had no arrow indicating it had subcalendars within it. I right clicked on Calendar and chose New Calendar. It gave me a list of the existing calendars that were missing !!
When I cancelled, there was an expand arrow next to Calendar in the Navigation pane !!!!!
Expanding it showed the unchecked missing calendars. I checked them and synched again.
WRONG THING TO DO! ALL my wife's calendar entries in her iPhone since the laptop went down 3 weeks ago DISAPPEARED. No warnings, nothing at any step of this process. The OL files overwrote the iPhone data.
I can't find any way to get them back as this **** iStuff relies on iTunes for everything.
Is there any way to get her files back from before this synch?
Is there no way to save data files off the iPhone w/o iTunes?
Why doesn't iTunes let you control the direction of data transfer?
I now have one very ****** off wife. -
How do I use Display Dialog to get back a date?
Can anyone tell me how to use Display Dialog to get back a date?
I am using the following code that does not work. It does not accept anything. And I have searched high and low for an answer to my question and found nothing.
repeat
display dialog "When should I remind you (date)?" default answer ""
try
if the text returned of the result is not "" then
set the requested_text to the date returned of the result as date
exit repeat
end if
on error
beep
end try
endrepeat
display dialog requested_text
The code is based on what I found in AppleScript 1-2-3 (page 300). It shows examples for getting text and numbers but not one for dates.
For what it is worth, my goal is to create a script that will convert an email from Evernote into an iCal Reminder. To do so, I want to ask the user (myself) for the reminder's date and time. I am assuming I need to ask for each separately. I also assume that once I get the date and time for the reminder, it should be relatively straightforward to 'make' a 'todo' with an alarm.
Thanks in advance.
-DavidHi David,
Try this:
repeat
set theCurrentDate to current date
display dialog "When should I remind you (date)?" default answer (date string of theCurrentDate & space & time string of theCurrentDate)
set theText to text returned of result
try
if theText is not "" then
set theDate to date theText -- a date object
exit repeat
end if
on error
beep
end try
end repeat
display dialog (date string of theDate & space & time string of theDate)
You might also have a look at this page of the AppleScript Language Guide.
Message was edited by: Pierre L. -
TM backup: can I use two drives to back up data on two other drives?
Hi to all!
I have with me a 1 TB/ Thunderbolt EHD [external hard drive], a Lacie 2 TB/FW, EHD, a Seagate 2 TB/ 2 USB, EHD, a Seagate 3 TB/ 2 USB, EHD and [to be purchased] a Seagate 2 TB/ 2 USB, EHD.
I mainly use my Mac for making HD videos using FCPX.
I am planning to use these drives in the following manner as indicated by the table below:
Drive:
a
1 TB,
Thunderbolt,
Buffalo
b
2 TB/ FW
LaCie
c
2 TB/ 2 usb
Seagate
d
3 TB/ 2 usb
Seagate
e
2 TB/ 2 usb
Seagate backup
[to be purchased]
f
500 GB, internal
Macintosh HD
Partitions
1
1
1
2
1
USAGE:
editing videos, one
active project at a time
mainly for camera
archives, music files,
FCP events, projects
and exported movies
same as the LaCie,
as a backup of data
intend to have 2
partitions of 1.5 TB each;
one partition for personal
data and the other partition
to back up data on the
Thunderbolt [current project]
intend to use this for
TM back up of my
Mac's internal HD
applications, documents etc.
backed up by:
one partition of 'd'
by the 2 TB Seagate
backup 'e'
I would like to know whether I could do these things:
Can I use the TM backup feature in this manner of using 2 separate drive/partition [e/d] to back up data on 2 other drives [f and a]?
Further, I am manually copying files from 'b' drive to 'c' drive; without incurring further expense, can I ensure that whatever I write onto the LaCie [b] gets copied to the 'c' drive automatically?
Any thoughts, suggestions and instructions in these matters are welcome.EXT. DRIVES:
a
1 TB
Thunderbolt
b
2 TB/FW
[LaCie]
c
2 TB/ USB
[Seagate]
d
3 TB/USB
[Seagate]
e
2 TB/USB
[Seagate]
USAGE:
scratch disk
[planning to have
only one active
project at a time]
camera footage
FCPX events, projects
and completed movies
Same as the LaCie,
as it's backup
To be used as TM
backup for my Mac's
internal and also to
the scratch disk.
Planning to have it in
2 partitions: to have
a 'secondary' copy of
my Mac's IHD on one
partition and to have
personal 'net retrievable'
data on the other partition.
'MY
OBSERVATIONS'
my projects are usually
less than 10 minutes
and hence I trust that
work would be fast and in
case of drive failure, I
would be losing only
one project.
I am importing camera footage
primarily into this drive and
being FW, data transfer is
fast.
Am manually copying
files from the LaCie
onto this.
This drive is not a
brand new one, but
has been given to me
by the company's
agent as a replacement
to my earlier 2 TB drive
which had failed.Hope
this also will not fail!
Because of the 'uncertain'
performance of the
3 TB Seagate, I intend
to have a copy of my
Mac's IHD in one
partition. I intend to place only
such data upon the other
partition that I will not be
greatly affected should the
drive fail.
If you can analyse this plan and give your insight upon this matter, I will be immensely happy.
Further, if this proposed use of the 3 TB Seagate is okay with you, I need to know how to remove the Thunderbolt from doing it's temporary role of TM backup and how to coronate the 3TB Seagate as its successor.
FYI, I would be switching off TM from functioning whenever I am editing video; I would be switching it on only after a full editing session.
Another question on my mind is this: do I need to partition the drive 'e' at all?
Message was edited by: somanna -
Good issue to Production order - Allows it in back posting date
Dear all,
Good issue to Production order ( 261 Movement ), allows us to post the component in back dated eventhough stock is not avaible on that date.
Example - Component stock on date 10.02.2010 = Zero , I made it Good receipt on date 18.02.2010 and now stock is available on date 18.02.2010.
Now GI to Production it allows the qty on current and back Posting date also , I want control on date with error message. It should not allowed the GI for back date from 18.02.2010.
Because of this our MB5B report shows the negetive issue qty if i post in back date.
Waiting for reply
Thanks and Regards,
SaurabhHi SAurabh,
PLease check whether Negative Stock is allowed for the valuation Area (plant).
GOTO >> SPRO >> MM>> Invetnroy management and physical inventory >> Goods issue/ Transfer Posting >> Allow Negative stock.
Untick the Negative stock allowed for your valuation area (PLant)
Regards,
Pravin -
Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?
The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
Maybe you are looking for
-
Event 55, Ntfs. Causing System to lock up every hour.
I checked the event log because my computer began locking up frequently last night. About a month ago I started regularly getting event 55 occurrences (after struggling to remove a browser hijacker virus) and now it looks like the last two event 55 o
-
Multiclip - adding angle - WHAT is used as the sync point???
When I try to add a clip to a multiclip, I cannot discern the rational FCP is using in determining where the new clip lands in timing to the others already present. My multiclips are In-point based. Tried every combination of ins, no ins, beginning o
-
Java.lang.ClassNotFoundException: Animate
Hi, I noticed that other developers are facing same issue, but here what happens with my applets . Just for info: I'm new to Java development.... I'm using JDK 1.4.2_05 under WinMe for development purposes and using Dreamweaver 2.0 (little bit old) b
-
Is there a way to make InCopy open all documents in normal screen mode, always?
Is there a way to make InCopy open all documents in normal screen mode, always? Now it opens in the screen mode the InDesign page is in when checked in. We don't want that. Thanks, Frederik
-
I need a CD/ROM of photoshohp that I bought.