Back up existing scenario

Hello,
i need to change the existing purchase order scenario in sap XI, we don't have the QA system we have only DEV and PRD, i want to back up the existing scenario or copy the existing scenario and work with the copied one. could any one tell me how to copy or backup the scenario. and where can i check the trasports in xi scenarios(java stack).
regards,
Gayatri Gaddam.

Hi,
Export
<systemdir>/xi/repository_server/export
<systemdir>/xi/directory_server/export
Import
<systemdir>/xi/repository_server/import
<systemdir>/xi/directory_server/import
Regards,
Wojciech

Similar Messages

  • Coping the existing scenario in IR and ID

    Hello every one,
    thnak you every one, at last we have tested scenario(RFC, SOAP) in XI-Dev, message process is successful, 98% credit goes  to SDN users,basically i don't know any thing about XI,  I'm an abaper now i think i know some thing about XI, waw i have never seen such a super active forum, i thank every individual in XI forum, last but not least,  i want to copy the existing scenario in XI Dev and back up existing scenario in PRD, if some thing happens i want to go back to old scenario in PRD, while coping the scenario, do i need to change  all the interface names, could any one tell me how to copy the scenario in IR and ID.
    best wishes

    Hi,
    It is always prefer to take backup by exporting the Repository objects and the directory objects..
    If you observe, you can see these imported objects in the imported folder-->import files directory..i.e after successful import, all files will be stored in that directory..
    Anyway you can take up the back again with export functionality..
    If you want to copy Repository objects , then you need to copy one-by-one.. Need to copy all individual objects for the different SWC/Namespace.. Lots of conflicts may occur, like message type will refer old namespace etc,,
    Here it is very careful,,
    Rgds,
    Moorthy

  • I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

    I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

    Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

  • I tried to reload my Ipod touch.  I accidently selected "start new ipod" icon on the Ipod and then "back up existing ipod" on Itunes.  Now the Ipod is unresponsive, constantly shutting down and restarting.  Even after multiple "forced" shut downs.  Help!

    After updating the os, I tried to shut down, clear and reload my Ipod touch.  Here's where I goofed:  at the prompt for starting the reload process, I selected "start as new Ipod" on the Ipod, but in Itunes, I selected " back up existing Ipod from computer" or something like that.  Now the ipod is constantly shutting down and restarting and no controls can be accessed.  All I can do is the "forced shut down" which I have done multiple times and let sit for a half hour off. 

    Disregard,  hooked up to itunes and clicked on summary, selected restore, all is well.

  • Can we change the Existing scenarios name in a outline

    Hi All,
    I have a requirement like change the Existing scenario name to another name...
    Ex: Existing scenario name Scenario -> "Budget"
    After changing scenario name Scenario-> Fcst_Buget
    Can we do this???
    If yes, what are the things i need to take care because we have data for that scenario...please let me know...
    Please update on this ..its urgent

    You can absolutely change the member names.
    Are you concerned about the impact on data loads, formulas, calcs, etc?
    An easy way to have your cake and eat it too is to assign an alias to the member so that Budget now becomes Budget with an alias of Fcst_Budget. Whatever artifacts refer to the old name continue to do so and from a reporting perspective you reference the alias.
    Or you can reverse it so that the member name now becomes Fcst_Budget and the alias is Budget.
    Your choice, but I think the former is what you want.
    Regards,
    Cameron Lackpour

  • Deleting an existing scenario

    I have to delete an existing scenario.
    If I delete the software component from SLD, could I have any problems?
    I am thinking in deleting it from there and then delete every object in IR and ID.
    Is this the right way?

    Hi
    I can delete anything in DEV and QA, but I cant do that in PROD.
    Is this the right way? :
    delete the Interface mapping, Message Mapping, Message Interface, Message Type and Data types in DEV, and then activate the changes.
    Transport this changes to QA.
    Transport from QA to PROD.
    Then, enter the SWCV in edit mode and delete the namespace from it. Save and activate the SWCV.
    Al last, delete the complete scenario in ID (in DEV). Then transport it to QA and finnaly transport it to PROD.
    Am I wrong in any step?
    All steps are correct. But you can delete namespace directly then all mappings and objects will be deleted under the namespace.
    Activate the change list and transport to Q and then P
    Thanks
    Gaurav

  • Effect on PI Existing Scenarios When Java is Upgraded.

    Hi Folks,
    In my PI 7.0 Quality Server, JAVA is upgraded by basis. Will it effect any existing PI Scenarios in PI Quality. If Yes, Please suggest me any solution. why because they are also planning to do java upgradation for PI Production .
    Thanks,
    Dileep

    Hi Dileep,
    Is your Basis team going to update the Service pack in PI 7.0 or are you going to move to an all new version of PI like PI 7.1 or 7.3 ?
    If it is going to be a Service pack upgrade in PI 7.0, then there will be no impact on your mapping. If it is to an all new version of PI, then follow the below link for some inputs,
    SAP PI upgrade known issues

  • HT4910 How do I back up existing app data to a new phone?

    I just set up iCloud on a second phone. I want to push the data from an existing app to the new phone. How can I)

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Updating an Existing Scenario

    Thanks in advance for the responses.   When I started 25 years ago in IS this would be considered a miracle.
    My scenario is this:
    I have created a FTP=>FTP scenarion in the IR.  I have imported to the ID and have a working scenario.   I know find out that one of the files has been deleted and split into two new files.
    I have updated the SWCV in the IR with the new files and I'm wondering how do I move the to the ID without manually configuring them?

    Hi Mark,
    <i>My question is this. My initial configuration in the IR had 20 files. At some later date the configuration has changed to 22 files.</i>
    Do u mean, you have 20 communication channels created for 20 files ? And you have 20 mappings etc ... is so ?
    If so ,anyway your scenario is File to File , so you can go with one file adapter (provided your all source files are droped into same folder) as a Sender, which will take any type of data ( if it is .csv file, then make generic content conversion with Record level) and then do the rest. So that you no need of changing the your configuartion/IR each time.
    Related blog-
    /people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
    /people/swaroopa.vishwanath/blog/2005/06/24/generic-approach-for-validating-incoming-flat-file-in-sap-xi--part-1
    <i>If can't update the ID from the IR once the IR scenario has changed what is the point?? Do I need to create a new SWCV?</i>
    I think if you go with above approach, I think it is not required to create multiple SWCV etc.
    I am in US
    Hope this helps,
    Regards,
    Moorthy

  • Cant back up existing vault or create new vault

    everytime I try to create a new vault aperture crashes. same thing happens when i try to update an existing vault. I have tries creating new vaults on both an EHD and my desktop and they always crash. Please help

    I have repaired permissions and repaired the library numerous times. I have not tried a smaller library.i will do that now and let you know what happens, thank you

  • Migration: Ex 2007 to Ex 2013 and co-exist scenario: Subject Alternative Name certificate

    We are planning the migration of Exchange 2007 to Exchange 2013. In our Existing SAN certificate for Exchange services (OWA,ActiveSync), we have a URL that we included that we no longer have a service for or anything associated with it. For
    example: mail.contoso.com.
    Can we use this URL in the new Exchange 2013 certificate (3rd Party) we request/obtain as opposed to putting an entry for legacy.contoso.com? Or will we get errors?
    Thanks for your answers!

    Hello,
    No problem. For example, currently, you have two records in SAN, the last one is not in use.
    {a.domian.com, b.domain.com}
    You can:
    a.domain.com -> Exchange 2007
    b.domain.com -> Exchange 2013
    BTW, you must have autodiscover.domain.com point it to Exchange 2013.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Error/Doubts in Idoc-XI-File scenario

    Dear All,
    I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
    For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
    Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
    Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
    In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
    Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
    Can anybody guide if I have followed the correct steps & where I am doing the error.
    Warm Regards,
    N.Jain

    Hi ,
    Plese refer the following blogs ,
    IDoc to File
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    You have to do all this settings mentioned in the docuemnt:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
    Also can you check this weblogs on the same:
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
    /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
    Thanks ,
    Suvarna
    Award pts if  it helps .

  • System Level Acknowledgement in File to IDOC Scenario

    Hi All,
    I have the File-> IDOC Scenario. Once the IDOC is successfully sent to R/3, PI  should send a acknowlement file back to the sender system.
    Could someone suggest how to design this scenario?
    Should I use IDOC Acknowledgement. As it is a existing scenario, I dont want much change in r/3 side.

    Dear All,
    For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
    For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
    I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
    Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

  • Very very urgent - roll back changes made to standard Basis SWC

    Hello all,
    I have a complex scenario where enterprise service enhancement was made.
    Basis object is present below imported objects and it will have many standard sap objects
    it gave a message "Object is defined in a subordinate software component version. Do you want to add the object to the software component and modify it?"
    I made modifiction to the MESSAGE INTERFACE of Basis object and unknowingly I activated it.
    Ever since that I see change symbol and M symbol to the standard object. I want to get rid off and place the original object back in place
    How do I roll back to the original?
    if not how do i put the actual basis object in that message interface of basis object?
    plz tell me asap coz I want to put it back as it was earlier.
    thanks
    nikhil..

    Hello Nikhil,
    Re: change names of PDT, SWC, NS, without disturbing existing scenarios
    SWC removed from SLD by mistake
    GUID of SWC is changed
    May these posts will help you...

  • About back-end adapter and IDoc

    Hi everybody!
    I was watching in the FAQ of Mobile 7.1 about the possibility to use IDOC as a mechanism to push data to DOE, but this document only says: "IDocs are supported only for back-end-triggered scenarios" and provides a link to configure ALE between the backend and DOE, but the link doesn't work. (Somebody has this information on a link that works?)
    I'm trying to find any information, blog, article, how-to guide, however I cant found anything. Anybody has documentation about how to configurate and implement a backend-adapter to push data from the backend through IDOC? Any information will be welcome.
    Thanks in advance.
    Best regards,
    Simon.

    Hi San,
    You will have to look after this in Tansaction SE80. Open the BSP application cProjects, and find the appropriate view. (The naming convetion will help a little). Open the view tab: layout >> e.G. progAssignedPha.bsp Here you will find what BSP elements it consists of. You will find the
    <htmlb:tableView and <htmlb:inputField ... elements.
    Here you will find the information you are looking for.
    As easy as in SAPGui you can not find out this information.
    Regards.

Maybe you are looking for