Back up files from Project Manager will not link.

Info:
Mac
Premiere Pro 5.5
Lacie 6TB Drive
E-Sata connection
RED R3D footage
- Ok I used the Project Manager to "Collect Files and Copy to New Location"
- Once 2TB of edited footage was copied to the new hard drive to use for editing.
- When I open up the backed up project on the new drive Premiere will not batch link the footage. I am having to link 2TB of footage ONE BY ONE.
Does the "Copy files to new location" just totally screw any ability for Premiere to find the files?
If so it is pretty much useless.
How do I fix this?
Thanks in advance, this is really important and time sensative. You guys rock.

Lame,
If the Path (absolute) is changed in any way, the links to those files are broken in the PRPROJ file. PrPro will ask, "Where is file____ ?" At that point, one would just navigate to the new location (Path), and choose the first file asked for, in that folder. PrPro will then relink to all used files in that folder, automatically. If one has the files in various sub-folders, the process will need to be repeated for each folder. PrPro also offers a Finder, to help with the navigation, if necessary. Once all Assets have been re-linked, I would do a Save_As, and increment the Project's name.
Good luck,
Hunt

Similar Messages

? Some pdf files from the web will not open, some will.

Some pdf files from the web will not open, some will. I am using Adobe Reader 10.0.1 on an 8-year old puter I have just upgraded to 2G of RAM. It worked fine before with 256K. When a file won't open I get error message "There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again (103:103). Have uninstalled and reinstalled all Adobe products several times. Ideas?

Good luck with that. Adobe10.0.1 is a bug infested BAD program. Look at the posts relating to this issue for the last 3 days. Many, many problems. Support is no help.

File Server Resource Manager will not load WMI Objects on Windows 8.0/8.1 Preview with Hyper-V and Server Tools Loaded

Hi Folks,
I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
If there is anything you could share on this problem I would be much obliged.
Thanks again,
Crysta
PhotM Phantom of the Mobile

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Project Manager will not collect all files and Start a Complete New Project

As editor of several projects consisting of multiple terrabytes of footage, it's very important to me to be able to use the project manager to collect all files and start a new project. However, this is not happening!! After I've completely finished a project I should be able to save a new "trimmed" project in the desired location of choice. When I use this feature with PrPro CS 4.2.1 - I only get a partial trimmed project that when opened asks where are the missing files. I've also tried using the project manager to collect all files and move to a new location. Again, only a part of my project is being moved!!!! Earlier versions of the PpPro had no problems with this function. I've got two systems and both of them are identical in actions. Any help would be greatly appreciated!!!
BBTv

How can one do that if each project has thousands of pieces of video, text templates, music scores, photoshop documents, after effect files and so on? The number of different folders per project is almost mind boggling. Any help at all in a quick fix or update or anything would be greatly appreciated. I don't have any problem with my other editing programs and have run earlier versions of PrPro that had no problems with collecting all the files within a project and exporting them to a new location throught project manager either in trimmed or full projects. I really hate to have to start using Final Cut again because of such an easy issue. I know I'm overlooking something and any help would be greatly appreciated.

Project manager will not copy project

After finishing a long 45 minute project i want to save and archive, but near the end of the yellow bar finishing it comes up error please try again we could not copy files... Anyone.. Steve

I've never used Elements, so I can't offer any kind of comparison.
For archiving a Premiere Pro project, you will need to keep the project file itself along with any associated media - video, audio and stills. If you have Dynamic Links to After Effects you will need that AE project file as well. If you authored to DVD or BD you will want the associated Encore files also. Move these things to your preferred location using a file manager.

Can I back up files when my desktop will not load? Are they gone forever?

My desktop will not load. I have used the Tiger restore disk that came with my Macbook Pro and used Disk Utility to verify disk permission, repair disk permissions, and verify disk and repair disk. I rebooted and it will still not load my desktop. I tried this twice.
Is there anything else that I can do to copy some files off the mac, or should I just go ahead and reformat?
Thanks.
Message was edited by: rick.pearl
Message was edited by: rick.pearl

rick.pearl wrote:
I rebooted and it will still not load my desktop. I tried this twice.
It's not very clear what you mean by this: can you log in? Do you get the spinning rainbow wheel, or nothing? or does it go back to the login window?
Is there anything else that I can do to copy some files off the mac, or should I just go ahead and reformat?
If you have another Mac, as your profile seems to indicate, you could look at his: How to use FireWire target disk mode. That will allow you to rescue your files.

Files from iWeb '08 will not open in 'Web '11

I have several sites that are generated in iWeb. At work I use a Quad G5 running 10.4.11 and IWeb 2.0.4. At home I'm using a 24" iMac running 10.5 and iWeb 3.0.2. I write and update my sites seamlessly from either computer.
Over the weekend I upgraded my home iMac to iLife '11 and Snow Leopard. I wanted the enhancements of iPhoto and so I reluctantly upgraded to the required 10.6. I now find that iWeb documents that are now created in iWeb 3.0.2 using Snow Leopard will no longer open in iWeb 2.0.4. This is quite a catch 22 for me.
I cannot upgrade my Quad G5 from 10.4 due to my requirement for some legacy software. I cannot install another drive on my Quad G5 with Snow Leopard as it needs an intel processor to run. Any suggestions out there besides the obvious one of going back to Leopard on my home iMac?

Unfortunately our company must continue to use powerPC's on 10.4.11 to run Macromedia Freehand MXa natively. Thus our reliance on Quad G5's. We feel like a cab driver in Havana driving a '53 Buick. We have to keep them running to do our graphics work. We have several machines running Freehand. Most on 10.4.11, but two of them run 10.5. Freehand runs painfully slow on Rosetta.
This afternoon we have moved all of our iWeb files to a Mini running Snow Leopard and iWeb 3.0.2. That will fix our iWeb problems and enable us to stay current as long as Apple still supports iWeb. I would be remiss not to caution anyone reading this post that iWeb domain files upgraded to 3.0.2 cannot be opened in 2.0.3 without the intervention method previously posted.
Thanks Again

Premiere Pro Project Manager does NOT include After Effects files.

Warning: Premiere Pro "Project Manager" does NOT include the After Effects 'dynamic linked composition' files associated with the project when "Collect File and Copy to New Location" resulting in the incomplete and loss of all dynamic linked compositions in the new project destination ( folder or disc drive ) .. I know this also includes Photoshop dynamic links and assume includes Audition audio files as well.

Here's the best way: Personal Responsibility.
Put all of your project files in one file. Stop asking PPro to do it for you. It's simple. This is a no-brainer. If you create a linked comp, create it in the same file as your PPro project and files. When you send it to Encore, create the Encore project in the same folder. Works all the time, every time. When you're sure that you're finished with the project for the forseeable future, move the entire folder off your workstation into storage. Do I move a copy of each asset (video clip, image, audio, etc.) into this folder before I import it to my AE or PPro project? Yes I do. Is it overly time-consuming? Not really. I can fly on my machine. Does it beat not being able to open a project later. Oh yes. Yes it does. I'd say I did 50 projects last year this way. When I occasionally had to move a project folder back to the workstation, I had no problems. Everything worked as it did before I off-loaded it. That's because I take personal responsibility for my projects. It's imporatnat that theyt work, especially if I end up having to hand it off to a third party down the road.
BTW, my workstation is RAID 0. If you are using anything less, you need to upgrade. What I'm trying to tell you is that my system works very well. I have not always done things the right way. I have had my share of frustration. The point is that I learned. Now I'm passing that on to you. I use CS5 on an HP Z800 with a measely 12 gigs of ram and a single i7 quad core and the aforementioned RAID 0 configuration and a hacked Nvidia GTS 450. It works quite well. I'm sure I would do even better with another i7, 12 more gigs of ram and a Quadro 4000, but this is what they give me to use.
Additionally, I'm using CS5 at home on a MUCH older HP xw8200 dual dual Xeons, 12 gigs of ram and software-only MPE. Guess what? It works quite well.

I want to download an album from Canada, it will not let me use my credit card on file, why?

I want to download an album from Canada, it will not let me use my credit card on file, why?

You can buy ONLY from the itunes store of your country of residence ( as proven by the valid billing address in your credit card) AND ONLY while inside the borders of that country.
You would have to buy it elsewhere - Amazon, Wal-Mart, etc.

I have thousands of songs dowloaded from my cds and purchased from itunes that will not play. It states the file cannot be found. What happened to them and where are they?

I have thousands of songs dowloaded from my cds and purchased from itunes that will not play. It says file cannot be found. What happened and where are they?

When songs cannot be found, it's either because they have been moved from the original location that you told iTunes, renamed or deleted.
So have you:
renamed songs?
moved them to a different loaction on your computer since you imported them into itunes?
deleted them since you imported them?
stored you iTunes library on an external drive? If so, that drive needs to be on and ready every time before you start iTunes.
... or is another programme renaming or even moving them, such as Windows Media Player? (It has been known to if you let it.) Did you previously use Windows Media Player?

Extension Manager will not open and Adobe doesn't care

Just search on “extension manager will not open” in the Adobe Forums or Google and pages of hits come up going back to CS4. This is a serious problem that Adobe is simply ignoring.
I have Windows 7 Professional 64-bit with Design Premium CS5 installed. Nothing happens when I click on Manage Extensions from within any Adobe application, nothing happens when I click on Adobe Extension Manager CS5 on the start menu, and nothing happens when I double click on a .mxp file. No error messages – nothing.
So I had a free couple of hours and decided to call Adobe. Six hours later, after talking with Raj, Peenal, Tushar, Madhur, and Sandeep (get the picture?), after noting that none of them had ever even heard of the problem, after my call was dropped during one 30 minute wait, and after a complete uninstall and reinstall of the complete CS5, I have exactly the same problem I started with.
For my purposes, Design Premium CS5 is literally useless without extensions and Adobe has left me holding a $1500 boat anchor. Do you think anybody at Adobe cares? I don’t.
Bottom line - DO NOT BUY Design Premium CS5 if you need extensions. They very possibly will not install and Adobe won't/can't help you.

Thanks to Carl Sun and Zhiqianq Liu, my problem with Extension Manager is resolved (the problem with Adobe support is not).
I followed Carl's Sun's instructions to the letter. I created a ExManLog.YES file and then manually ran Adobe Extension Manager CS5.exe via "Run as administrator" as Carl suggested and the Extension Manager ran for the first time.
In other words, either creating the ExManLog.YES file (unlikely) or manually running the .exe file as administrator (most certainly the solution) solved the problem.
Running, rerunning, rebooting and rerunning all work now – all without right clicking on Adobe Extension Manager CS5.exe before running Extension Manager. That is, it was apparently sufficient to right click on Adobe Extension Manager CS5.exe and then run the Extension Manager as administrator one time.
Now what's diabolical about this is that my user has full administrator privileges. Still, Extension Manager wasn’t actually running as administrator until I physically located the .exe file and manually ran it as administrator one time.
And what’s doubly diabolical is that all those guys at Adobe didn’t have a clue and Carl and Zhiqianq solved it right away.
Thank you, thank you.
Now – Adobe – if you are reading this, five of you guys caused me six hours of untold grief (case # 182188172) when the solution was actually very simple. I won’t be forgetting that anytime soon and I hope others who read this will get the message that Adobe support is seriously dysfunctional.

Can I use Time Machine to recover backed-up files from a stolen computer?

Hi everyone,
I used Time Machine to back up my MacBook Pro but unfortunately it was stolen this week. I'm going to buy a new MacBook Pro and would like to recover the backed-up files from my old computer via Time Machine, though not necessarily transform the new computer into a clone of the old one. Can anyone point me to step-by-step directions for how to do this with Time Machine? Is there a way of using Time Machine to select, a la carte, which backed-up data you want to restore to your new machine, or is it an all-or-nothing deal?
Thanks for your help and advice!

Yes. Use the migration assistant.
First, I'd set up the new computer and choose not to migrate any data (this sometimes causes issues). Run all software updates, then run the Migration Assistant (In applications). It will allow you to choose a time capsule to migrate information from. You will be able to choose what information to pull from the time capsule: it won't simply clone the old computer.

I have Elements 10 when I select a thumbnail from organizer it will not open in editor what do I do?

I have Elements 10 when I select a thumbnail from organizer it will not open in editor what do I do?

I deleted the photoshop settings file. I can't get the welcome screen back now.
Ted Neis
719-395-9251
719-429-4916
"Rise above principal and do what's right."
                            Joseph Heller (1923 - 1999)
                      " He wrote Catch-22"
Date: Wed, 28 Nov 2012 09:28:20 -0700
From: [email protected]
To: [email protected]
Subject: I have Elements 10 when I select a thumbnail from organizer it will not open in editor what do I do?
    Re: I have Elements 10 when I select a thumbnail from organizer it will not open in editor what do I do?
    created by 99jon in Photoshop Elements - View the full discussion
You need to keep the keys pressed for several seconds. Close down Elements. Hold down the CtrlShiftAlt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it. Or hold down the keys whilst clicking on the desktop icon for the Editor or PhotoshopElementsEditor.exe in the Programs folder. Keep holding down all three keys until you get the settings option. You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?Click on YesThen wait whilst Elements rebuilds the preferences. You should see something like this (example PSE9) http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-4880527-258346/320-111/Setting s-pop-upPSE9.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4880527#4880527
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4880527#4880527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4880527#4880527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

emilypdunne wrote:
Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?
Is what you're saying that you only want backups in TM of the state of your Mac from January 2015 to the current date and nothing before then? I'd think the simplest solution would just be to delete in TM all the backups prior to 1/15 and then let TM do its thing. The ultimate source for all things Time Machine is here. On this page, note the comment that "Time Machine will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup" which I understand to mean that if you delete all the backups in the TM file prior to 1/15, any file that wasn't present on your Mac as of 1/15 will no longer be represented in the TM file. Note that the second link also has instructions for how to delete TM files.
If you were trying to accomplish something else, then as Emily Litella (Gilda Radner in SNL) used to say, "never mind."

We have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions

we have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions?

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Back up files from Project Manager will not link.

Similar Messages

Maybe you are looking for