Back up for BCS data

Hello,
I have some issue and I don't know how to solve it.
The client wants to create a backup for data by creating additional cubes. After the finish working on a data and approve the financial reports, they want to copy the transactional data to the backup cube. In a case, some data will get lost or damaged in the original cube (ZBCS_C11) they want to analyze the data in a backup cube (ZBCS_C11G).
I asked the BW team to create a transactional cube ( which is a copy of ZBCS_C11 cube). They did it. But they say they can not create a copy of all other cubes (virtual Infoprovider, Infocube for reporting (Delta load) and Multiprovider for reporting(Delta load)). So, it is impossible to design BEX reports on a backup cube as it designed on an original cube.
They built a multiprovider above 2 cubes -the original one (ZBCS_C11) and the backup cube (ZBCS_C11G). But the BEX report designed on this multiprovider doesn't show all data. I think it is because the "Reporting mode" object is missing.
Any ideas?
Thank you,
Lilia

I see the point...
Actually, you only need a virtual cube to read the back up cube data ( in order to apply the consolidation logic), not necessarly the complete delta load scenario... (indeed the delta load scenario was designed to improve the performances).
And I agree, that it is not easy to create manually this virtual cube : in standard it is generated by the system from the BCS workbench, from a precise databasis / datamodel.
What is maybe more reallistic is to find another server where you could copy your BCS/BW customizing, such as a Pre-production system, and fill this system with your production data for a back up. Please look to the following blog to perform the data transfer from one BCS system to the other one very easily (without system copy) :
/people/collet.thibaud/blog/2010/10/18/sem-bcs--refresh-your-test-system-with-productive-data-using-a-datamart-interface

Similar Messages

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

HT1766 I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

Select setup as "New", the next screen should prompt you to rename your phone. Just name it what you already have it named. After that, you should be able to sync and all of your data & settings will still be exactly as you've already set them up on your phone. The message is more threatening than what really happens.

HT4847 How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!

How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!

Thanks very much!
Although I had to add everything again to the playlist, at least I can just copy it over in future!

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Input needed for writing data back into BW/ECC data

Hello Everyone,
Can anyone please let me know an example or process you have used for writing data back into BW (DSO/Cubes) or ECC systems.
We do not have integrated planning in our current system configuration currently.
So, any sample code for using any of the BAPI/RFC for writing data would be appreciated.
Also, I am trying to find out if there is any way to schedule the models developed in VC 7.1 in background to automate certain type of data processing which goes across multiple systems.
Any help would be appreciated.
Thanks.

Hello,
Can anyone please help me out on this one....
I am aware of few BAPI's such as RSDRI_ODSO_INSERT_RFC but I am not aware of what action has to be used to transfer the data from the table within VC to this BAPI and how to define the parameters as the one's available for the BAPI I mentioned do not fit into the data I have in the table within VC.
The following are the columns I have in the table within VC,
1. GL Account
2. Credit Amount
3. Debit Amount
4. Sales Amount
I have defined the DSO with the same where G/L Account is the keyfield and the rest being data fields.
Any help would be really appreciated.
Thanks.

What message type to use for syndicating data back to R3 from XI

What message type to use for syndicating data back to R3 from XI. It gives a Message type IDOC error code 51.

Hi Rehman,
You are getting error 51 which means "Error: Application document not posted".
This might because of two reasons:
1. Your IDoc doesn't contains all the mandatory fields required by the inbound function module to post the IDoc.
2. You have assigned wrong inbound function module to post the IDoc.
Please check these cases.
Hope this will help you.
Thanks,
Shiv Prashant Dixit

Lost my iphone 5 data when backed up for 1st time.

I lost all of the photos and other data on my I5 when i backed it up for first time. It asked if i wanted to back up from last date which i conformed. the last date was the date i backed up my old I4. Now it has reverted back to that data and everything taken since had I5 has gone. Can i get it back?

You didn't "back up" your I5, you did a restore, and you chose the old backup from the I4. Maybe you never did a backup of the I5.
How to restore:
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your device. Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.

I have a nano 1g and at the back i see the date as 2006.Is it eligible for replacement?

i have a nano 1g and at the back i see the date as 2006.Is it eligible for replacement?Are all ipods sold between sept 2005 and dec 2006 eligible for the same?

You can check to see if your iPod is eligible by visiting this link.
http://www.apple.com/support/ipodnano_replacement/
B-rock

I have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

i have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

Might be corrupted preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.desktop.plist
Click Go then move the com.apple.desktop.plist file to the Trash.
Restart your Mac and try changing the desktop photo.

HT1338 MacBook Pro OSX I keep getting a message, "The back disk image, "/Volumes/Data/Don's MacBook Pro. sparse baundle is already in use so, apparently my Time Machine can't back up my compute for about 2-3 weeks now. What do I do?

Time Machine cannot backup my MacBook Pro because: THe back disk image "/volumes/data/don'sMaBook oro.sparsebundle is aready in use/
What do I do to fix this?

Please look over to the right of this page and locate the heading of More Like This.
There are multiple answers and solutions there.

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

Data Federator XI 3.0 using DB2 VARCHAR FOR BIT DATA Column?

We have a column in a DB2 database that is defined as VARCHAR(16) FOR
BIT DATA.
We are using the suggested IBM JDBC driver, db2jcc.jar, against a DB2
OS/390 8.1.5 version database.
The Datasource column displays a data type of NULL, indicating the DF
does not understand or cannot handle this IBM data type.
We have two issues.
First, target tables are not able to return any columns, regardless if
we exclude columns defined as NULL as mentioned above. We see the
'Wait' animation for a very long time when we use the 'Target table
test tool' option. Selecting to display the count only, returns zero.
We are able to fetch and view non-NULL column data when using the
'Query tool' under the Datasource pane.
I also get the same result when using the 'My Query Tool' in Server
Administrator; a selection agains the sources returns data while
selecting from a target table returns no data. Also, a 'select
count(*)' returns zero.
The second issue is in mapping a relationship between two DB2 tables
where the join is between two columns of the above mentioned type
(NULL).
The error we get back when we use "Show Errors" is "The types
'NULL' (in 'S1.PLANNEDGOALID') and 'NULL' (in 'S2.PLANNDEDGOALID') are
not compatible.". When reviewing the relationship, a dashed red line
appears instead of a solid grey line between the two tables in the
"Table relationships and pre-filers" section of our mapping pane.
The following query returns an error via the Server Administrator
Query Tool; "Types 'NULL' and 'NULL' are not compatible for operator
'=' (Error code : 10248)".
select count(*)
from
(select s1.CASEID, s2.PLANNEDGOALID, s2.NAME, s2.PLANNEDGRPSTTYCD
from "/DF_CMS_ODS/sources/CMFSREPT/CMSPROD.PLANNEDGOAL" AS s1
,"/DF_CMS_ODS/sources/CMFSREPT/CMSPROD.PLANNEDGOAL" s2
where s1.PLANNEDGOALID = s2.PLANNEDGOALID)
Here are the properties settings in the Resource Connector Settings
for jdbc.db2.zSeries we are using.
capabilities: isjdbc=true;orderBy=false
driverLocation: drivers/db2jcc_license_cisuz.jar;drivers/db2jcc.jar
jdbcClass: com.ibm.db2.jcc.DB2Driver
sourceType: db2
supportsCatalog: no
urlTemplate: jdbc:db2://<hostname>[:<port>]/<databasename>
Here are the Connection parameters as defined for the datasource in DF
Designer.
Defined resource: jdbc.db2.zSeries
Jdbc connection URL: jdbc:db2://DB2D03:50000/CMFSREPT
Authentication: Use a specific database logon for all Data Federator
users.
User Name: x
Password: hidden
Login domain: -- Choose a defined login domain --
Supports Schema: checked
Schema: is empty
Prefix table names with schema name: checked
Supports catalog: unchecked
Prefix table names with the database name: unchecked
Table types: TABLE and VIEW
So, the following is the two questions we require answers for...
Is this a limitation of Data Federator?
Is there a work around short of changing the datatype in the database.

Hi Darren,
The VARCHAR() FOR BIT DATA is a binary data type and Data Federator does not support binaries. But if in your case, it makes sense to map this column to a VARCHAR data type you can configure the DB2 connector to view this column as a VARCHAR.
Your column can be mapped explicitly to a data type of your choice using a property: castColumnType.
This property can be set updating the resource you selected when you registered you DB2 data source.
If the resource is "jdbc.db2", then:
1. Launch Data Federator Administrator
2. Click on "Administration" tab
3. Click on "Connector Settings"
4. Select the right resource: "jdbc.db2"
5. Click "Add a property"
6. Select "castColumnType"
7. Set its value to: VARCHAR() FOR BIT DATA=VARCHAR
8. Click on Ok
You should see this column as a VARCHAR.
Regards,
Mokrane
PS: For the target table issue, we have forwarded your mail to the Data Federator Designer team.

Backing up and restoring data to new cucm server

Our publisher server went down.I have back up for the device.Cisco have send me the new CUCM server.Is there is any possible method i can restore the back during the installation or do i have to start installation from the scratch and after completing only i can restore the data.
Sent from Cisco Technical Support iPhone App

You install CUCM, THEN, you can restore a backup.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Back up for BCS data

Similar Messages

Maybe you are looking for