Back Up iPod: How Many Disks Are Required

I have an iPod Nano 2nd Gen. I want to back up @ 500 songs to CDs. Before I start I was wondering if anyone could tell me how many CDs I would need.

Thanks. Was never able to figure out the conversion between KB and MB. The average file size is 5,600 KB. So how many disks to you think it will take.... 5,600KB x 480 songs = 2,688,000KB. Appreciate it!

Similar Messages

  • How many Job_queue_processes are required?

    Hi all,
    I want to know how many Job_queue_processes are required to drive 50 schedulers.
    According to AQ manual. it says "at least 2 for message propagation" and "set higher values if there are many queues", however, there is no sizing guidelines.
    If you have an experience to create many schedulers which has multiple destination queue, please let me know what number you set to job_queue_parameters.
    NOTE: In our environment, we have 50 schedulers, and each one of it has 3 destination queues.
    Thanks in advance.

    Hi ennisb,
    Now we have 50 schedulers, and we need to propagate 100 messages per second in total. Required throughput is not so high, but we want to set latency=0.
    I think it is better to set job_queue_processes at least 50. However, I wander whether I need extra jobs to realize better performance and/or stability...

  • How to find out how many CPUs are required from SAPs

    Hi,
    I am trying to do sizing for SRM product.
    Now questions is
    1> How to determine no.of CPUs , kind of CPUs freq. etc from SAPS.
    Is there any formula for it?
    Even we ask this to hardware vendor, will verndor be aware of SAPS. How can vendor relate CPU details to SAPS?
    Best Regards,
    Tushar

    Hello Tusher,
    > How to determine no.of CPUs , kind of CPUs freq. etc from SAPS.
    The SAPs is determined by running the SAP SD benchmark. At the end of this benchmark you will get a value of SAPs and could determine the SAPs for each core. So you need to specify how many SAPs you will need and the hardware vendor can configure you a server environment, that is possible to handle your requests.
    > Even we ask this to hardware vendor, will verndor be aware of SAPS. How can vendor relate CPU details to SAPS?
    For sure .. if it isn't .. go away and search for another.
    Regards
    Stefan

  • How many channels are required for one G711 Call on T1 PRI

    Hi Everyone,
    Just have a basic question.
    Lets say i want to make one G711 call which is compressed. below will be the bandwidth required.
    Calculation:
    Total packet size (bytes) = (Layer 2 Ethernet header 6 bytes) + ( compressed IP/UDP/RTP header of 2 bytes) + (voice payload of 20 bytes) = 28 bytes. Total packet size (bits) = (28 bytes) * 8 bits per byte = 224 bits
    PPS = (64 Kbps codec bit rate) / (160 bits) = 409 pps
    Bandwidth per call = voice packet size (224 bits) * 409 pps = 90 Kbps
    From what i know, 1 channel on a T1 has a bandwidth of 64kbps.
    Question:
    Does this call require two channels to start the conversation?
    Will this call be successful?
    How will one channel accommodate this call?

    No, 64 kbps basically matches the payload, and the TDM T1 trunk needs no IP header overhead, so it matches, even if it did not you are trying to compare apples and oranges as when you send the call to channelized T1 circuit it's TDM based (bandwidth is irrelevant), if by T1 you meant data T1 then the circuit would not be channelized and would provide total 1.544 mbps.
    Chris

  • How many licenses are required to be bought?

    Hello..
    We are a section of ten in our organization with 1000+ manpower. To make a lot of work lighter, we have decided to go for Acrobat Pro. Is it possible to get license for all ten of us? And if yes, how much would it cost?

    You can click on the business link on this page and get the details about the volume licensing.
    or you can goto the following link:
    http://www.adobe.com/volume-licensing/business.html
    here you will get the information about different type of licenses avaialbe and details for enrollment. Hope this helps.

  • How many bytes are required to store an integer?

    Hello,
    I ran this statement: DATA x(2) TYPE i value 234.
    I thought the value of x should be 23, because i defined it with the lenght of 2 bytes.
    In the sap help i found that the lenght of an integer is 4. But i can define DATA x(5).
    I am little confused.
    Thanks,
    Efren

    No you confuse between type "I" integer, stored binary mode, and type "N" stored in character mode
    23231234 is stored
    - "01627B02" in binary/integer - TYPE I
    - "23231234" in numc/char non-unicode - TYPE N  on a non-Unicode system
    - "0031003200330034" in numc/char unicode  - TYPE N on a Unicode system
    Remarks :
    - TYPE N allows a length declaration.
    - TYPE I allows a range from -2147483648 to +2147483647 (4294967296 different values 2^32, minus sign)
    Regards,
    Raymond

  • How many Disk do we store Flash back on?

    We used oracle 10G,
    we have archive logs 26G/day
    we think of flash back on.
    How many disk do we store flashback files?
    Please help us for informations, when we need oracle flashback?

    Are you asking about raid levels? If you are only copying your archive logs to one destination, then you should at least have your archivelog disk mirrored, if not a higher raid level like level 5. It would be advisable to archive to multiple locations. Remember, if you lose one of your logs before they can be backed up, you will lose data if you have to perform a recovery. The amount of disk space you would need would depend on how many archive logs you intend to keep available on disk. Also, are you using the flashback area for your rman backups? You would also need to have additional space for each of these backups you want to have available on disk. Remember, you can always backup archivelogs to tape and delete them.
    My general rule of thumb is that I like to only use up to 60% of a disk available for logfiles. This way if you have a large spike in DB use for a period of time you are not going to quickly run out of space. In this example if you generate 25G of archive and you want to keep 5 days worth, then you would generate 125G during this time period, I would probably want to have 200G of disk available to give you 60% normal usage.

  • How many SLD's require for 2 solman system requirements?

    Scenario1:
    One solman system for entire landscape->One SLD is required.
    Is this SLD should be a seperate system or can be within solman?
    Scenario2:
    One solman system for DEV/QAS and other solman system for PRD.
    How many SLDs are required? Can we manage with single SLD?
    If two SLDs, Then both should be seperate systems. i.e, One SLD -> DEV/QAS Solman, Another SLD ->PRD Solman.
    If only one SLD, Then it should be seperate system or can be within solman?
    We do have EP in client enviroinment. Can we use SLD of EP?

    Hi,
    you can use one SLD for all your systems if you want. You can either use an existing one or the one which comes with Sol Man. That's up to you.
    Any scenario is possible.
    /cheers

  • HT201269 Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID

    Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID ?

    If you have registered all your Apple products, you can see them at:
    https://supportprofile.apple.com

  • How do I count how many songs are on my iPod?

    How do I count how many songs are on my iPod? Also, how do I figure out how much space I have left on it?

    Hi.
    in the ipod under settings>about it says how much room is available. how many songs are on the ipod. other things to.

  • I reorganised my music organisation totally in iTunes on my Mac (Lion). iTunes does not sync this new artist organisation to the iPod and many albums are divided over several artists. How can I change this?

    I reorganised my music organisation totally in iTunes on my Mac (Lion). iTunes does not sync this new artist organisation to the iPod and many albums are divided over several artists. How can I change this?

    I've called the Apple helpline. The only way to organise music on the iPod classic, is to use playlists. They themselves can be organised in playlist folders.

  • How many gigs are the new ipods?

    how many gigs are the new ipods

    There is no way to know what they will do.
    You can look at Apples website and see everything that is known.

  • HT204074 I do not see a "Manage Devices" link when I access my account information through iTunes. I want to know how many devices are linked to my account. Can anyone help?

    I have accessed the Apple Support site http://support.apple.com/kb/ht4627 but I could not find the "Manage Devices" link on iTunes. The advice they give is as follows:
    You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
    Open iTunes.
    Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
    Choose Store > View My Account from the iTunes menu.
    From the Account Information screen, click Manage Devices.
    Next to each device or computer name, you will be able to see when each was associated to your Apple ID. You will also be able to track how many days are remaining before your associated devices or computers can be associated to a different Apple ID.
    Help would be greatly appreciated! Thank you!

    Hello from Albania,
    Please help me !! I'm desperate
    I sold my iPhone 4s a few months ago.
    Now i got my self a new iPad and created a new apple ID which i recently accociated with ITunes and ICloud.
    However, i can't update anything on my Mac since it still requires the old apple id, even though i changed it anywhere i could.
    I also don't get the manage devices when i tried to do this through the iTunes.
    I have no idea what to do.
    Waiting for your reply.
    Regards

  • How do we know how many PDFs are generated?

    Hello All-
    We have created an Application ID with enough credentials on it to call the Adobe Services and our developers are using WebServices to call the Form Server in their code with that particular App Id and Generate the PDFs and what we really want to know is if there is any setting in the Adminui or in the code where we can set that and see how many PDFs are being generated for a period of time from that particular App Id? We are not using PDFGen component.
    we are using Adobe LiveCycle 8.0.1 SP3, WebSphere 6.1 and DB2 8.2 database.
    It will be great if someone can tell me if they did this before.
    Thanks in Advance

    On the old discussion software, they had distinctive avatars and identifiers under the avatars. They could have adopted distinctive avatars with the new forum software but they didn't. The reason that they didn't, I assume, is because the new software allows secondary icons to identify users. Every level had its own icon, the Hosts had their own icon, and Apple employees had theirs. This identification system was temporarily disabled along with the rest of the levels and reputations because of the performance hit that was being caused. It may come back if they can fix the performance problems.
    Until then, Hosts and Apple employees have been using text signatures, such as "Apple Discussions Host" to identify themselves. There may be Apple employees who have not gotten the word about the text signatures.
    BTW, to see what I mean by the identification icons, look at how Jive has implemented this feature on their own support forums. On this forum page, look to the right in the box labeled "Legend".

  • How many messages are in an archive file?

    Hi,
    Is there a way to tell how many messages are written to each archive file?  It looks like the default file size is 200M.
    Your help will be greatly appreciated.
    Regards,
    Rick

    Hey
    If you really want,you can cancel this job in sm37.
    But i would say that you can let it run. as long as it does not affects the performance of PI system you should be ok.
    a better approach would have been to increase the retention period in sxmb_adm,then go to SE38 and execute the program RSXMB_SHOW_REORG_STATUS, this will tell you how many messages will be archived/deleted once the job run.
    You can set the retention period so that it takes around 50-60K messages, then let the report run ,should finish in 3-4 hours max (thats what i used to do), then go back to sxmb_adm and reduce the retention period.execute the report again and see how many messages it will archive now.
    Keep on doing this until you archive/delete all the messages.
    Thanks
    Aamir

Maybe you are looking for