Back up of the RAR 5.3 configuration done

HI all,
I want to have a backup of the configuration done in one our systems.So that if some changes are done they can be revert back by applying changes .Any pointers ....

Hi Ambarish,
You may keep backup of these settings -
in CUP - goto configuraiton - initial system data- there is option to export- select what you want to keep and make a export file. You may import it any time again.
In RAR - goto Configuration - Utilities - Export - select what you want to keep.
In RAR - Rule Architect - Utilities - Export - select what you want to keep(risks etc)
In RAR - goto Mitigation- Configuration - Utilities- Export - select what you want to keep(risks etc)
In ERM - You can export all business processes, subprocesses etc one by one . there is export option with each of them.
In ERM - You can export Org Value mapping
In ERM got oConfiguration - Configuration Settings - Select what you want and export.
You can import all of them at any given time.
Thanks & Regards,
Sabita

Similar Messages

HT1386 is there anyway of going back to a back up before the current one?

is there anyway of going back to a back up before the current one?

I don't think so, once you created a backup it will override the old backup.

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...

I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
First close Photoshop.
Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
Gene

HT2404 my hard drive crashed and nothing recoverable. Apple installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

My hard drive crashed and nothing recoverable, local Apple Store installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

A blank drive needs to be formatted first, you do that hold c boot (or hold option key boot) from the 10.6 install disk (or Lion USB)
Read how to format the drive in Disk Utility here
https://discussions.apple.com/docs/DOC-3044
How to install OS X
https://discussions.apple.com/docs/DOC-3251
Software Update fully,
Hold the option key and click on Purchases when in MAS to download your 10.7 etc.

HT1689 my ipad mini retina display is disabled. I believe I know the cause. I packed it with my blue tooth key board in my back pack. The key board likely entered various keys and the ipad believes these entries were invalid password attempts. I am tr

my ipad mini retina display is disabled because my blue tooth key board made number key entries while in my back pack. How do I re-enable?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

What is the "best" way to configure iTunes on an iMac with personal user acounts so each user can access the media library but sync devices on their personal user account?

I am trying to determine the best way to set up our imac so each user account can access the same media (songs, movies etc.) through itunes and also back up and manage their personal devices under their own personal user account. There are 4 users on our iMac. Me, my wife, and our 2 children. We have built an extensive library of music/media together using the same iTunes store account. I would like to establish a seperate apple id and iTunes store account for each of us going forward but have the ability for each of us to share our purchases. What is the best way to configure our system and devices in order to allow shared access to media and at the same time allow for individual management of devices including contacts, apps, photos, etc. Please help, I would like to do this once!
Thank you in advance!

OK, seeing as no-one replied (presumably because a lot of this information is on the forums in bits elsewhere) here's how I've got on so far.
Applications - just went through them. About the only one I needed was my media server app. Just downloaded and re-installed, had a quick look back though my email to find the license key and it all went on fine. Installation never seemed quite right on my old machine so solved that problem too.
Movies - New iMovies just copied across the clips and projects into their respective folders. Seems to have worked but haven't checked it all that thoroughly. Some duplicate footage here but I can trim this out at some point when I get a chance to go through here.
Documents - Just copied these across.
Photos - used an app called iPhoto Library Manager. You can download for free but have to pay to use the part that consolidates your libraries. Possibly if I was willing to spend a bit more time I could have got away without using this but given I didn't know the state of my different libraries and just how many duplicates I had this was too much of a convenience to ignore. Also got my library into a state where I can now spend a few hours organising it a bit better with Faces / Events etc.
Not attempted Music or iPhone sync yet as been stuck trying to solve a problem with my power adapter.

Why don't we do the confirmation in variant configuration?

Hello guys,
As far as i know that in variant configuration we don't do the confirmation, we directly do the goods receipt.Is it right?If yes than why?
Following are the steps we do while doing the variant configuration scenario:
1)First we create the characteristics and give the values inside it.
2)Then we create the class of class type 200 and give characteristics defined in it.
3)Then we create the variant of class type 300 and give all the characteristics inside it.
4)Now we create the configurable material with Basic data 1,2, MRP 1,2,3,4 , Classification view ,workscheduling view.
In classification view, we give the variant of class type 300.So it shows all the characteristics and its value over there.There we select all the values.
5)Now we create the super bom of configurable material and in class tab we give all the classes of class type 200.Here even we can maintain the dependencies if we define all the characteristics value in item tab.
6)Then we create the super routing and inside it we give all the possible operations inside it.Right now my routing contains operations which are necessary all the times.
7)Then we create the configurable profile for configurable material of class type 300.
8)Now we give the requirement in md81 for configurable material and there we select the characteristics values which we want.
9)After that we run the mrp for configurable material and it generates procurement proposals(planned order) for it.
10) Afer this we convert this planned order into production order and release it and save it.
11) After this we do the goods receipt for the production order in mb31.Because of this it shows the stock of sales order as production order qty.
This procedure my tutor has taught me.Have i missed any steps or am i wrong somewhere?If that the case than plz guide me.

if you can generate a production order then you can always confirm it according to SAP PP logic.
we use variant configuration for the manufacturing of complex products. once the component quantities and
operation are selected for a particular variant and copied to Production order, the rest of the process is same
as normal Production Control. Revert back with any queries you have.
Regards,

I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

You can't.
Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
The only real protection you have is with the personal information on the device rather than the physical device itself. This requires action before the device is lost/stolen. If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

Has anyone put the RAR Background Job Spool on a different server?

We are on GRC 5.3 SP 13.
Has anyone put the RAR Background Job Spool File Location (assigned in the Miscellaneous configuration section) on a server different than the one that the GRC Frontend/Java system is on?
I currently have it assigned to a folder on the GRC server, but it is running out of space. I am having a problem getting the users to delete old reports as they say they need to keep them for internal Audit controls. They are also resisting downloading the reports (more work for them). I have been told that we cannot easily increase the file space on the GRC server (would basically have to purchase more storage and rebuild the server).
I was thinking about moving the folder over to our virtual storage area, were file size can be more easily expanded. I haven't found any documentation that says the folder has to be on the GRC server, but I also haven't seen any examples of where it has been put on a different server.
Has anyone done this, and did you run into any problems?
Thanks.

Hello Bob,
I got your point. Probably there's no recommendation about this, because the recomended practise is to delete or archive the spools as suggested in note : Note 1511027 - Periodic clean up of spool files
If you have a requirement to keep these files "online", I think the option to save them to a network drive is fine. I haven't tried it for this specific scenario. You have to take into account:
- Specific user to connect to FileServer
- Availability of the FileServer. If the FS is down, the RAR job will cancel.
- Performance. I mean, write to a local disk is not the same to write to a network drive. This point is very difficult to measure, because it depends on a lot of things like network speed, server load, etc.
Maybe someone has already implemented it and gives you more hints.
Cheers,
Diego.

HT201263 i've a problem with the passcode unsure why its not recognised it and the pad recovery mode is not working, really worried that unable to get back into the ipad what can be done

Hi can any one help, I've done any update and put a passcode and its not recongising it on the ipad and know its disabled. I've followed the recover mode a number of time and it keeps saying ipad could not be resorted, An unknow error occured (3194). been trying for hours please help

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
~~~~~~~~~~~
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Windows could not update the computer's boot configuration. via UEFI installation

I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
computer's boot configuration, Installation cancelled.
I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what.
please help.
raymund r

Hi,
Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
Try again to install Windows 8.1 again.
If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
https://discussions.apple.com/thread/5491283?tstart=0
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support

I updates my iPad with the latest iOS and despite backing up all the information prior, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently requires assistance. Thank you!

I updated my iPad with the latest iOS and despite backing up all the information prior via iTunes, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently require assistance. Thank you!

Hi Sam,
I understand where you are about being your own IT department, it can be overwhelming ...
What drives to buy depends an awful lot on how you will use them, what your budget is, and your preferences.
In the case of your DP Powermac, for online storage used primarily for editing, I would add one or more internal drives first. Look for drives that are at least 7200rpm and have at least an 8MB cache. 10,000rpm/16MB cache is even better, but more expensive. Seagate Barracudas have always been good choices.
For backup purposes, I'd pick some good external FireWire drives; you can also use these for online editing, lots of people do. Your Mac has both FW400 and FW800 ports - either kind is fine but if you get drives that support both, you would want to connect them to the FW800 port for the added performance.
In my experience, the Lacie d2 Extreme drives have been very very good. In fact I have 3 of them daisy-chained off my iMac G5 right now and they work flawlessly with FCE. Weibetech and Granite Digital drives are further upscale in performance and price. RAID configurations would be even further upscale. Do stay away from consumer level hard drives, however ... the Western Digital MyBook series & no-name drives come to mind ...
Don't use a FireWire hub for your external drives, it's just asking for trouble.
ps. And thanks for your nice comment about me. I'm happy to help, as are other folk in the forum.

HT4113 So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.

The Iphone asking for the password Yahoo account configured sometimes

I have an iphone 4, I have configured two Yahoo accounts and other ..
Well, now and then I skip a window and asks for the password of Yahoo accounts ... I introduce the password and it works ...
I do not understand why sometimes asks me the password ... I was before ... but totally reset the Iphone ... and now comes back.

It means the apps in question were purchased under your Apple ID rather than his.

HT1296 Having difficulty getting music from my old 4S to transfer to my new 5S. I go through a Sync process and when it gets to the last step of Sync, the blue Audio bar shrinks back to show the few albums that are already on the phone.

I've been trying to get songs from my old 4S to my new 5S. I am using a computer to accomplish this. My 5s has a few albums I purchased from iTUnes. I see all the music I want to transfer to my new phone. I go through a Sync process and it cycles through the steps but the music will not get to my new phone. I used the Manage my music configuration.

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Back up of the RAR 5.3 configuration done

Similar Messages

Maybe you are looking for