Back-up problems with my N80-Help!

I've been trying to back up my phone for quite some time so that I can install the updated software. For some reason Pc suite repeatedly refuses to copy my messages, when I do a back-up everything else is copied fine.
However, text messages are the element that I most want backed up, so would it work if, through nokia file manager I copy and paste the contents of my inbox and sent messages folder into a file on my laptop-intall the new software on my N80-THEN drag the inbox and sent messages from my laptop to my phone?
Hope you can help...

Any ideas...?

Similar Messages

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

I restore my iphone 3gs but after that iTunes show a message there is a problem with your iPhone, help me please

i restore my iphone 3gs but after that iTunes show a message there is a problem with your iPhone, help me please

Yes. Talk to whoever replaced the battery. Sounds like they broke something.

My phone although fully charged has just switched itself off and won't turn back on again! I'm just coming to the end of a 2 year contract and never had any problems with it. Help please!

My iPhone 4 although fully charges has just switched itself off and won't turn back on again. I've tried taking the sim card out but nothing happens. I'm just coming to the end of a 2 year contract and never had any problems with it before. Help please.

Start here
http://support.apple.com/kb/HT1430

Troubles/problems with Nokia N80....Any help????

Hello everyone!
I bought a Nokia N80 few months ago, suddenly, it started developing problems, i have problem with the microphone and the camera, the camera won't work, i can't see anything, it shows only a white screen, can't see anything and the capture button won't work and when i switch to the "secondary camera, it shows "Hardware failure:restart camera" i have restarted the phone a couple of time, it still doesn't work, and when i make or recieve calls, i hear the person from the other end but they don't hear me, any help will be appreciated, thanks in advance

I forgot to add that the video mode has same problem (white screen)

I am having a problem with ICLOUD. Help!

I am having a problem with my icloud. So here is the story. I had iphone 4. My contacts were backed. Someone stole my iphone. I got a new iphone 4s. My contacts did not sync from my previous iphone 4. so someone told me to restore to iphone 4 backup. I did. And wow! i got all my contacts back. I want all my contacts to be saved. And i don't want to lose them, it took me a while to build this list properly. With email and number and address.
Here is what i tried so far, i backed up from itunes to computer, then backup to icloud, then I did from my phone, i turned the contact switch on also, and the swtich on to back up to icloud. When I go to icloud.com. it's not there. If anyone can help me with this issue I would appreciate it. because i have a lot of contacts, and I need to save them in a way, I won't ever lose them.

You would need to backup into icloud again also if you have enough room to backup. If not purchase more icloud backup or backup to itunes. Sync your contacts back to your email where they will always be.

Problems with F4 Value Help in NW2004s Portal

Hello,
we are having some troubles with the F4 ValueHelp Extension from the Advanced BSP Programming book (and the blogs of course).
We've implemented the solution on a 4.7 backend and portal 6.0. No problems there, everything was working fine.
We now moved to erp2005 (WebAS 700) and NW2004s Portal (7.0).
The popup shows and I can select entries from the list. But when clicking the ok icon a javascript error is thrown stating that 'parent.document.getElementById(...)' is null or no object.
I think the problem is, that by making a call to 'parent' we are searching in the portal frame and not the BSP. There (in the portal frame) the element is not known so the error is thrown.
I allready changed from the dialog_ie6.js provided on the BookCD to the one delivered by SAP. Did nothing regarding the error.
I also tried changing ZCL_BSP_M_INPUT_HELP->BUILD_ACCEPT_SELECTION_SCRIPT. I changed all the "parent.document.get..." "to document.get...". The error message was still the same, 'parent.document.getElementById(...)' is null or no object.
So now I'm kind of stuck. If I try the example outside the portal everything works as expected. So this clearly seems to be a problem with the portal integration. All involved BSP-Apps are marked as "supports portal integration".
Any ideas on this topic?
Thanks and kind regards,
Alexander Sperling

I have a working solution to the problem. It isn't the nicest solution because it will probably require some modifications to the application that hosts the value help, but we will get to that in a second.
I tried many different ways to come up with a solution that would still work via JavaScript. The portal is now loading the popup javascript in the master frame. It registers event handlers so that if any application triggers a popup internally it "hi-jacks" the event. So regardless of what I change in the BSP javascript library, it gets overriden by the portal one. The portal also now even enforeces its theme on the inner page in the popup. Truly the portal takes complete control over the inner html of the popup.
To make things worse the popop has not path to reach the source that triggered it. The source objects are tracked in the javascript, but because the master frame takes over; the popup window only has access and visibility to the master frame and the navigation frame. In essence in the DOM it is now higher in the stack than the object that actually triggered it.
Web Dynpro gets around this because it doesn't use any client side mechanisms to communicate it results back to the source frame. Web Dynpro has the luxury of always being stateful and therefore can make certain assumptions that would never work in BSP. The hi-jacking is an excellent solution for Web Dynpro. The portal can then override the functionality of Web Dynpro - providing the new functionality of floating the dialog box over the entire portal - without having to make any changes to the Web Dynpro Framework. However they never had our little BSP solution in bind obviously.
It might be possible to completely rewrite the popup_ie.js and popup_ns.js to use all different event, method and variable names. This separate version could then provide complete separation from the portal script. However this is just a theory. I'm afraid that I wouldn't have the bandwidth to rewrite the entire script right now so I focused on a quicker solution.
The only approach that I could come up was to follow the Web Dynpro approach and return to the server with the value. To do that I used Portal Eventing. Portal Eventing allows us to pass a value to the source frame regaurdless of our relative positions in the DOM.
In my inner BSP application for the value help (ZES_VALUEHELP), I made the following change in the model method BUILD_ACCEPT_SEL_SCRIPT_V2. At line 141 I changed the logic. Instead of using JavaScript to write the selected value back into the source element, we will just trigger a Portal Event:
****With an InputField we write the contents directly back into the element
      ELSE.
        CONCATENATE me->js_close1
        `portalFireEvent('com.sap','`
        me->element_id
        `',"`
        key
        `");`
         INTO me->js_close1.
        EXIT.
The other change is within the Element handler class for inputHelpV2 - ZCL_ES_BSP_ELMNT_INPUT_HELP_V2. We need to register the listener for the Portal Event. Therefore in DO_AT_BEGINNING we will add the follwing at line 23 (right after we place the Element Id into the URL Parameters Table.
data: portal_event type ref to cl_portal_event.
portal_event = cl_portal_event=>factory(
    name = <wa_params>-value
    namespace = 'com.sap' ).
while m_page_context->element_process( element = portal_event ) = co_element_continue.
endwhile. "End portalEvent Render
Overally using the portal eventing actually is an intersting approach. There is only one drawback, now we have a server side event. That being the case, our application now needs some event logic to process this event and populate the value. Depending upon if you are using MVC, Data Binding, or Flow Logic this could vary - and would have to handled by each application. The nice thing about the old approach was that it all happened via JavaScript on the Frontend and didn't require the application programmer to do anything - that was obviously its weakness as well.

Audio/Firewire Problems with Mini, Please Help!

I just bought a brand new Mini from Amazon.com and am having some problems. First, when I plug computer speakers into the mini, the sound continues to come from the internal speaker and the mini ignores the speakers. In System Preferences, it doesn't even recognize that something is plugged into the machine.
Second, the Mini does not recognize my external, Firewire iSight camera. In System Profiler, it does not show anything connected to the port when the camera is connected.
The Mini is the latest rev running 10.4.11. Leopard upgrade disks should be in the mail soon.
Any ideas as to what is wrong? Should I just return to Amazon for a replacement? Thanks for your help!

Having just posted in a similar situation, pardon the cut and paste, but these are the first two (and easiest) things to try:
First reset parameter RAM - it's an area of non-volatile memory used for system settings and hardware configuration. It it gets corrupted, it can cause odd problems.
Reset PRAM
-Shut down the computer.
-Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in the next step but one.
-Turn on the computer.
-Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
-Hold the keys down until the computer restarts and you hear the startup sound for the second time.
-Release the keys.
Next, perform an SMC reset. The SMC is the device which controls system hardware and devices, so if there is a problem with hardware components not functioning, it could be that.
To reset the SMC on an Intel mini:
-From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
-Unplug all cables from the computer, including the power cord and any display cables.
-Wait at least 15 seconds.
-Plug the power cord back in, making sure the power button is not being pressed at the time.
-Then reconnect your keyboard and mouse to the computer.
-Press the power button on the back to start up your computer.

Error code 2318 (problem with installation package) HELP

Ok so I tried to download itunes earlier today, and it went fine until the very end, I got this message...
''The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2318''
So I went through and tried to repair the itunes to no avail. So I removed everything and ran the microsoft installer cleanup utility, then re-installed itunes and quicktime. Again everything went fine until the end, got the same ''2318'' error message. Itunes shows up on my desktop, as does quicktime. When I click itunes I get a pop up window telling me the application must close due to error, would I like to send an error report.
So I went back and uninstalled everything AGAIN, and now its downloading again. I'm getting kidn of peeved... can anyone help me?

ok I got it. Had to end up doing a small overhaul on the computer to remove the corrupted ''sample.mov'' file out of the quicktime folder, but its working now.

Big problems with IMac-need help

I have an older model iMac G5 that my daughter has been using on week-ends when she comes home from the local college. She said that she was having a lot of problems with Safari quitting, getting weird messages with MS Office and kernel panics. I decided that the best thing to do would be to erase and install Leopard. During the installation process I got a message that Leopard could not install due to a problem with the base system. I then tried to install from the restore discs (which were backups that I had on hand since I couldn't find the originals) and from a Tiger install disc. I got errors each time. Now there was no longer an operating system on the iMac. I took it to the local genius bar. The genius seemed kind of frazzled since he was helping several people, but he seemed sure that it was the hard drive because of the kernel panics and the fact that he couldn't install anything onto the computer from an external firewire drive.
I purchased a new hard drive from Amazon and a friend who is very knowledgeable about these things installed it for me. We still couldn't install an operating system. We then installed it using Target Mode by putting the Tiger DVD on a Powerbook. I then proceeded with Software Update. I had no problems with applications like iTunes and DVD player. However, whenever I tried to upgrade the operating system I got this message "The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by "Apple". I used Disc Utility with the Tiger DVD and it showed no problems.
So, there is obviously something really wrong. I have no idea what it is. Any ideas out there? Should I take the iMac back to the genius bar? I don't want to spend a lot more money on it, since it is just used on week-ends when my daughter is home. Thanks.

It could be any of those things, but likely is the motherboard. Take it in and have Apple look at it.
Let us know what they say, please.

6 weeks of problems with Ical- Please help

For 6 weeks now I have been having problem after problem with Mobileme, Ical, and contacts synchronizing with my imac, laptop, and iphone after at least two years of no problems. I have been to the Apple store over 6 times and have had 3-4 hour long chats with Apple technicians and have had 3-4 emails with an advanced technicians. Everyone is quite nice and really seems to be trying to help fix the problems, sadly, this situation is still not resolved. My confidence that Apple knows what is going wrong or knows how to fix it have really taken a hit and I'd ask anyone who has the savvy to help me with this to PLEASE help me out here.
The current situation is:
Cannot log into Mobile me to get my calenders - Apple can't either. We both can log in to idisc, contacts, etc. though all are duplicated 2-3 times.
If you try to sync with the phone, including after re-setting what appears to be a correct calender on to mobileme first, the phone calender will appear completely blank.
Manual sync with the USB works. However, even if you totally wipe the whole iphone and then install just what is on the computer, some appointments are missing on the iphone! I have verified that there are just the correct calenders listed on the imac so the appointments missing on the iphone are part of the calender listed on the imac. (When I wiped the iphone and choose automatic sync, numerous calenders were seen. Part of the reason there were so many calenders at all was part of the problem I initially had and the result of apple technicians trying to fix it!)
I now have. mac and .me mail accounts listed on my iphone despite the fact that the .mac account had been replaced with the .me account of the same name by at least two technicians at the Apple Store and Ichat.
I need help immediately and cannot either wait for Apple or have much confidence they know what is going on.

Yes this has been a nightmare for me and started with duplicate dates, followed by duplicate calenders, and 2 years of lost data, followed by duplicate contacts. I am clear that some of this is the direct result of how I was advised to fix my problems.
I have seen 2-3 people report problems around this same time frame. The techs at apple have denied a system problem from that time but like you it is odd that a system that seemed to work perfectly went wrong at that for at least the two of us and three other people that I know of. I have only reviewed a portion of the posts.
My conclusion is that Apple does not provide adequate warnings or instructions regarding how to interface with ical, syncing with mobile me, or what needs to be backed up even though one is putting one's data on the cloud and 1-3 other devices. Further, the protocols Apple techs use to deal with these kinds of issues seem to be leading to more problems.
I have saved a comprehensive log of my chats with Apple and my interactions with the "genius bar" at Apple that I'd be willing to post here or share via email that shows how this process evolved and what choices were made to remedy the situation.
To briefly illustrate my point consider these things I've learned in the process:
1). Apple does not design all of it's key software with auto back-up like they do with Final Cut, or Intuit does with "Quicken". Apple told me that they expect someone would use the "export" or " back-up iCal" from the file menu. They also said that I had the option of using the utility "back-up" or "Time Machine" if I wanted "auto" back up.
I must admit to feeling pretty stupid about all of this until I remembered that Apple emphasized the automatics of "the cloud" as next step after the "Palm". Even the "Missing Manual" bills it that way. So... I just plugged and played as they say and did not actively make sure that I needed to back Ical up! I also thought that since my iphone backs everything up when you synchronize that everything would be saved. Anyone have any ideas how to get your calender off the iphone back up if the cloud and your computer files are wrong? I've been told that you cannot. I am also a bit unclear about what files need to be backed up if I want to use Time machine or back up to protect my Calenders? Again can't they just say so?
2). It has come to my attention after talking to 4 different Apple reps that the Itunes interface is a bit unclear. I was told that IF YOU USE MOBILE ME, YOU CANNOT HAVE THE SYNC BOXEXS CHECKED FOR ICAL, MAIL,CONTACTS, OR YOU WILL HAVE DUPLICATE ENTRIES. I am not sure if this is true or what started the whole problem. It does kind of make sense given there are Mobile me options in the system prefs for what to do with them as well.
Apple should have told me the above after they tried to resolve this duplicate problem last December by resetting my mobile me with my laptop, deleting and reinstalling my account on my phone and syncing with Mobile me. If they had, I would not have had the duplicate entries and as well as accounts a few weeks later. I also would not have tried using the same method to re-fix the problem leading to all my calenders prior to mid December being destroyed!
Why wasn't that warning in the itunes sync dialogue box to begin with?

Back up problems with Time Machine since I have Mavericks

Since I upgrade to Mavericks Time Machine is not able to back up my MacBookPro.
Not only it is slow but it never ends.
Each time it seems to reach the end of the back up 150 or 200 mb are added to the amount to be saved.
Without end.
Before Maevroicks I had Montain Lion and it was fine.
With my iMac I have no probleme with Mavericks ????

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Problem with nokia 6151:help me!!!

hello,
i have a nokia 6151 and i have any problem....
-when the mobilephone is starting is very slow and the screen si light on only for five seconds and after is light off. this phone haven't OS and i don't know because it have need more time for to start;
-when i use phone in a call suddenly switch off...i don't know why...i buyed this phone only 5 mounths ago, and i don't use it more...
-when i find files in the gallery,i wait many time for to show this...i haven't many files in my gallery...
i change old software with new but the problems is the same.
Please, can someone help me?
tnx so much,
Simo

Please try using the phone without a Memory Card instered. If this solves the problem then you have got a bad memory card. I have had similar problem with a Nokia 6230i with a defective MMC card.
Experience and persistence are second to none just ask user one.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question...

Serious problem with database need help

hello experts
i am working with MS-ACCESS and connecting it with java programing
now the problem with me are
according to my need i have to create a table that contain Autonumber field
but when i insert element in this table by query
String query1 = "insert into Forum (Subject,Author,Date,Reply) values('"+param1+"','"+username+"','"+dateformat+"',"+reply+")";
st1 = con1.createStatement(); it gives sql exception but when i remove
autonumber field and make it simple field it works ok but i want to keep autonumber field and thn want to insert it
is it possible to create a dynamic table in ms-access through java query like
String query3 = "create table"+"topicId"+"( message varchar(1000) NOT NULL,author varchar(50) NOT NULL, date varchar(30) NOT NULL)";
here topic id some variable that contain table name
i think problem is that MS-ACCESS has no varchar data type plz help me
The complete code i written is as follow
<html>
<%@ page language="java" import="java.sql.*,java.text.*" %>
<head>
<title> Processing the post request </title>
</head>
<body background ="images/modbkgnd.jpg" bgproperties="fixed" >
<%
   String param1="",param2="",topicId="";
   Connection con1=null;
   Statement st1=null;
   ResultSet rs1=null;
   int a=2,reply=0;
   java.util.Date date = new java.util.Date();
   DateFormat df ;
   df = DateFormat.getDateInstance(DateFormat.FULL ,java.util.Locale.UK);
   String dateformat = df.format(date);
   String username = (String)session.getAttribute("forumlogin");
   param1=request.getParameter("Subject");
   param2 =request.getParameter("message");
try
   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
   con1 = DriverManager.getConnection("jdbc:odbc:lingua");
   String query1 = "insert into Forum (Subject,Author,Date,Reply) values('"+param1+"','"+username+"','"+dateformat+"',"+reply+")";
   st1 = con1.createStatement();
   out.print("hello i am here");
   boolean posubject = st1.execute(query1);
   out.print("hello i am here");
   String query2 = "select *from Forum";
   rs1 = st1.executeQuery(query2); //retriving table id for creating
    out.print("hello i am here"); // message table
   while(rs1.next())
       topicId = rs1.getString(1);
   String query3 = "create table"+"topicId"+"( message varchar(1000) NOT NULL,author varchar(50) NOT NULL, date varchar(30) NOT NULL)";
   boolean createtable = st1.execute(query3);
   out.print("hello i am here");
   if(createtable)
      String query4 = "insert into"+"topicId"+"values('"+param2+"','"+username+"','"+dateformat+"')";
      boolean insertmess = st1.execute(query4);
}catch(SQLException ex){
    out.print("sql exception");
finally
   st1.close();
   con1.close();
%>
</body>
</html>

hello experts
first i change my Date to date and thn try but it was not working.
and thn i try as dinesh_tcs said
i change my query as
String query3 = "create table"+"topicId"+"( message string NOT NULL,author string NOT NULL, date string NOT NULL)";
but nothing help me
one more thing actually i don,t want to insert manually the field of autonumber what i want that my query work when i leave the autonumber field to insert values in the table ( or whatever way i want to insert values in that table by keeping autonuber given by MS_ACCESS)
plz do the change in code i have maintained above or if not possible thn write the query that u have tested

Back-up problems with my N80-Help!

Similar Messages

Maybe you are looking for