Back Up the Voting Disk After RAC Installation

What would be the dd command to Back Up the Voting Disk
my voting disk is on /dev/raw/raw2

What would be the dd command to Back Up the Voting Disk
my voting disk is on /dev/raw/raw2 dd if=/dev/raw/raw2 of=/home/backupuser/backup_voting_disk
What is the command to Back Up the root.sh Script?cp root.sh root.sh.bkup
Message was edited by:
forbrich

Similar Messages

Test to kill the voting disks

Hello -
I am running RAC 11.1.0.7 and I want to test what happens when I corrupt the voting disks. When I run the dd unix command, the node does not go down. I am also not seeing anything reported in the Clusterware log. Is it correct that Oracle automatically fixes corrupt voting disks? I ran the dd command on all three of them pretty quickly and I am still seeing it report they are healthy.
Any insights are greatly appreciated!
Thanks!

Hello,
this seems to be a duplicate of this thread:
How to simulate loss of voting disks?
Thanks,
Markus

I deleted photobooth by accident and i have tried to get it back with the setup disk, i got imovie and garageband back but not photobooth. Any ideas?

i deleted photobooth by accident and i have tried to get it back with the setup disk, i got imovie and garageband back but not photobooth. Any ideas?

PhotoBooth is not on the iLife disk which has iMovie and Garage Band. PhotoBooth is integrated into OSX, so it's not going to be easy to get back. You'll need to get it from the recovery disk or partition. Which OSX are you using so we can point you in the right direction. NEVER delete any of the OSX programs.

How do I change the screen resolution on my Dell PC back to the original setting after itune change ?

How do I change my Dell PC screen resolution back to the original setting after itune resolution changes

Hi penguin05,
Welcome to Lenovo Community Forums!
   First without the projector connected
           Right click on your desktop screen and select "Screen Resolution"
             you will get this page
Spoiler (Highlight to read)
Now Connect your projector and make sure that the display is now on your projector.
   under Display: Set it to your projector
             -Change the Orientation: to Landscape View then hit Apply.
Let me know your findings
Regards
Solid Cruver,
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT3275 Can some HELP, I keep getting this error with my Time Machine Back up, "The backup disk image "/Volumes/JKPN Safe/JKPN IMAC.sparsebundle" is already in use.

Can some one HELP me , I keep getting this error with my Time Machine Back up, "The backup disk image “/Volumes/JKPN Safe/JKPN IMAC.sparsebundle” is already in use.

See > http://pondini.org/TM/C12.html

How long can you revert back to the original photo after cropping?

Is there any time limit for how long can you revert back to the original photo after cropping? Are you always able to revert back?
Thanks.

DAM = "Digital Asset Manager", a fancy name for a filing system.
iPhoto keeps the original and makes one (usually much smaller) copy based on your edits. It is non-destructive in that if you crop, and later change the color, iPhoto will go back to the original and apply the corrections to get the new image, it will not simply modify the preview.
If you want a high quality copy of the image, use the export function which allows you to specify the size and compression.

OCR and VOTING DISK for RAC Database on ASMLib env

Can i use raw device for OCR and Voting Disk while installing Clusterware, i am planning to use ASM with ASMlib,
i know i can configure asm with dbca when i am using raw devices (to be user for ASM), How i can configure diskgroups when i use ASMlib, Can i configure ASM diskgroup with dbca , if yes plz forward me some metalink notes to study or any other help.

Hi,
Can i use raw device for OCR and Voting Disk while installing ClusterwareYes:
http://www.oracle.com/technology/pub/notes/technote_singh_crs.html
"Step 3: Create Raw Devices for the OCR and Voting Disk Before we start the installation"
plz forward me some metalink notes to study or any other help. I like Madhu Tumma's examples with raw devices because it has step-by-step examples:
http://www.rampant-books.com/book_2004_1_10g_grid.htm
Hope this helps . . .
Donald K. Burleson
http://www.dba-oracle.com

Where can i get a copy of the recovery disk after factory reset?

Hi, im wondering if anybody can help? i have a macbook thats a few years old and think it runs on 10.6 snow leopard. However i cant find the recovery disk. After sending it in to the shop to have more memory added, full back up onto an external hard drive and full factory resetits asking to be booted from the recovery disk. Can i download OSX 10.8 to drop onto a USB stick and load it onto the macbook? Thanks for any help

Hi Buddypup!
Drivers for your CanoScan N676U and Windows XP are available for download on the Canon website. Use the link below:
http://bit.ly/Y1AfBW
-Please note, you'll want to select the appropriate drop-down options from the drop down menus under "Drivers and Software" to obtain the Windows XP drivers.
Hope this helps!

How to change of NAME and IP after RAC installation.

Hi Friends,
I have a challenge here...Would appreciate if anyone can help me..
I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
My issue is now the server names and ips are set and I am going to install the RAC.
But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
Because according to their server naming standards, current production servers are having the acceptable names and ips.
The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
Any metalink notes or commands as it is........
Thank you,
Mahesh.

Hi,
You can change the IP later but you can not change the hostname of the system.
You have to install CRS freah if you want to change the hostname of the system.
Please let us know which IP you want to change.
You can see the metalink Note.276434.1 for VIP or VIP hostname change.
Regards,
KK

Redo log groups/files on the local disk for RAC DB

Whether is it possible/supported to place redo log files/groups on the local disk for a RAC databases ?
Thank you,

Hi Mufalani,
are you sure about this one? I'd think that this only works as long as the nodes don't restart/crash. I can imagine this like this:
The nodes store redo logs on local disks which are NFS-exported to the other node. Everything should be fine. But when one node crashes/reboots, the other one has to perform crash recovery for the crashed instance but this won't work when the NFS mount (with redo logs) is unaccessible. So I would not want to do this.
Bjoern

Preventing the User from going back to the main page after logging out.

Hi all,
In my project I want to prevent the User from going back to the Main page, by clicking the back button of the browser, after the user has loggged out.I had invalidated the session so the user will not be able to do any operations, but he can vew the infos. I want to redirect to the login page if the user tries to go back using the back button after he has logged out.
I tried the same in this forum after loging out. Surprisingly it is the same. I can browse through all the operations i did even after logging out from here.
Is it not possible to do that in Servlets?Could somebody help?
Thanks,
Zach.

Hi,
You can use a servlet filter to do this , as it can interceptany request to your application you can decide to allow user access or not to any page/servlet.
public class Test implements Filter{
     public void destroy() {
     public void doFilter(ServletRequest arg0, ServletResponse arg1, FilterChain arg2) throws IOException,
               ServletException {
          System.out.println("filter");
          HttpServletRequest request = (HttpServletRequest) arg0;
          if(!request.getRequestURI().contains("index")){ // set condition that will be checked to verify if the user is logged in
               System.out.println("redirecting ... ");
               RequestDispatcher d = arg0.getRequestDispatcher("/index.jsp");
               d.forward(arg0, arg1);
          arg2.doFilter(arg0, arg1);
     public void init(FilterConfig arg0) throws ServletException {
}in you web.xml add :
<filter>
          <filter-name>test</filter-name>
          <filter-class>test.Test</filter-class>
     </filter>
     <filter-mapping>
          <filter-name>test</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>

When I open messages on mu iPod touch the screen is blank and then goes back to the home screen after 10secs

When I open messages in my iPod touch the screen is black, I have no access to the keyboard and then after 10 secs, the screen bounces back to the home screen, why is this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings.Messages>Send and Receive and sign out of the account and sign back in.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Jumping back to the dvd menu after video ends.

Helloooo, I have Dvd Studio Pro 3.0.2.
1. When my movie/video ends it just goes to a black screen. How do I make it so it goes back to the start of the dvd menu?
I know I have to use a script or something its just how do I go about it. Is there any step by step instructions anywhere on the net for this type of thing. I have tried the dvd studio pro help and can't seem to find what i am after.
2. Also I have TWO MENUS and the first menu is like the intro, and the second is the actual menu where you play movie etc...
Can I make it so when the first menu is done playing the intro it goes to the second menu. Cause there is no timeline for the menu. I just want an intro and then the menu!
Cheers

This is the help stuff in the DVD STUDIO PRO saying about the JUMP thingy for the scripts.
I have applied it and nothing happens.
I know you have to put the JUMP command and then where you want to go. (Main Menu)
Nothing happens I have tried for hours to try and get it and it doesn't go back when i use the simulator.
1 Create a script and select it.
2 Enter Ocean End as the script’s name.
Note: Enter Beach End and Trail End as the names when creating the scripts for
the other two tracks.
3 In the Script Editor, select the first command line (Nop).
4 In the Script Command Inspector, choose Jump as the command.
5 To configure the jump command, choose Tracks and Stories > Beach > Marker 1 from
the Jump To pop-up menu.
Note: Choose Tracks and Stories > Trail > Marker 1 and Tracks and Stories > Shopping >
Marker 1 when creating the scripts for the other two tracks.
6 Add a compare function to the jump command to test to see if a Play All function is
in process.
• Select the Compare Command checkbox.
• Choose GPRM 0 as the “Execute if” element to be compared to.
• Choose equal (=) as the “is” compare operation type.
• Choose Immediate as the “to” element type to compare.
• Enter 1 as the “with value.”
If GPRM 0 has a 1 in it (indicating the Play All function is in progress), this jump
command occurs. If not, the script moves to the next command line.
7 In the Script Editor, click the Add button.
The next command line (Nop) is added to the script.
8 In the Script Command Inspector, choose Jump as the command.
9 To configure the jump command, choose Menus > Main Menu > Button 1 from the
Jump To pop-up menu.
All I am guessing is that how does it know when the movie finishes. I am just putting in a jump command in. like it seems i have to do something else.
Help me please!!!!

Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)
I expect your support...
thank you very much...

> how can I be sure that the disk is properly recognized before I buy it???
What do you mean exactly? Did you mean the HDD???
The A300 supports and 2.5 SATA HDD and all 2.5 HDD should be recognized properly since the SATA HDD controller hasnt any limitations.
Bye

How can I copy pics back to the RAW format after loading in iPhoto?

I downloaded pictures in the RAW format with no problem. Afterwards, I deleted them from my memory stick and am now trying to copy them to a jump drive in their original RAW format, but iPhoto converts them to JPEG. How can I get them back to the RAW format when copying to an external source?

Welcome to the Apple Discussions.
Select the pic in the iPhoto Window and go File -> Export and set the Kind to Original.
Iphoto does not convert the files to JPEG. Your RAW is protected. What happens is that iPhoto makes a JPEG preview of the file. IF you drag from the iPhoto Window or export with the Kind: Current you get that Preview. Exporting as Original will get the RAW.
Regards
TD

Back Up the Voting Disk After RAC Installation

Similar Messages

Maybe you are looking for