Back up volume is too large...but it's not!

I have a MacBook with a 250GB HD and about 60gb used.
I'm trying to use a 1TB Time Capsule which is also used by my IMAC.
When TM starts on my LAPTOP, it tells me that it needs 960GB to back up the laptop.
It seems therefore that it is trying to backup the laptop and Time Machine on itself!
I've tried excluding TC but that doesn't work either.
Any suggestions?!

You might do better posting in the TC forum here:
http://discussions.apple.com/forum.jspa?forumID=1253
You should also update your profile unless you are using 10.5.0, which may be part of the problem, if true.
Message was edited by: nerowolfe

Similar Messages

  • Time Machine says the backup is too large but it is not

    Time Machine says the backup is too large but it is not.
    While it is true my hard drive is very full (150 Gb used of the available 160Gb), this is way less than 42 Pb!!!!
    I have tried numerous time to reset it and still the same issue.
    Here is the reoccurring message:
    Advice?

    PB.. what the heck is a PB.. I kind of thought TB are still in fairly low digits.
    Do a disk verify.. something is seriously stupidly wrong.. Otherwise ring Apple support and give them an earful about nonsense popups.
    http://pondini.org/TM/Troubleshooting.html  A5

  • HT5621 I changed my Apple ID but on my iPhone when I go into settings iCloud it still shows the old Apple ID. How do I change this? I was going to delete the iCloud account from my phone then add it back with the new Apple ID, but I'm not sure...help!

    I changed my Apple ID but on my iPhone 4S w/ iOS 7.0.4, when I go into settings > iCloud it still shows the old Apple ID. How do I change this? I was going to delete the iCloud account from my phone then add it back with the new Apple ID, but I'm not sure...help!

    http://support.apple.com/kb/TS5223?viewlocale=en_US
    Peace, Clyde

  • My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    So now that you have repeated the same thing three times that doesn't make things any clearer at all.
    You are copying files from where to where?
    How are you attempting to copy files, software or click and drag?
    Any other detail would be helpful.
    Allan

  • I have Lightroom 5.5 as standalone app on my laptop and I want to use Lightroom mobile too. But I am not an Adobe CC subscriber. Can I use LR mobile? Right now it's telling me it's on trial and I have only 17 days left.

    I have Lightroom 5.5 as standalone app on my laptop and I want to use Lightroom mobile too. But I am not an Adobe CC subscriber and I don't have Photoshop CC. Can I use LR mobile? Right now it's telling me it's on trial and I have only 17 days left.

    But I paid for my Lightroom 5.5, LR Mobile is an app for LR5, isn't that unfair not to allow me to use LR Mobile? Adobe should change this policy.

  • HT4910 i have lost my icloud account password and i have tried a lot to get back my password through i forgot but i have not recieved any mail to my id regarding the change of password

    i have lost my icloud account password and i have tried a lot to get back my password through i forgot but i have not recieved any mail to my id regarding the change of password

    Check your spam mail. If you have more than one email address verified with that apple id that email will go to the rescue email.
    About the rescue email address
    http://support.apple.com/kb/HT5312

  • Requested buffer too large - but data is already in memory

    Hello all,
    I am writing a program that generates sound and then uses the Java Sound API to play it back over the speakers. Until recently, using clips have not led to any problems. On two computers I can play the sound without a hitch. However, on the newest computer (and also with the largest specs and especially more RAM), I am getting an error while trying to play back the sound. The exception that is thrown is:
    javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
    I find this odd because the buffer already exists in memory: I don't have to read in a .wav file or anything because I am creating the audio during the course of my program's execution (this is also why I use Clips instead of streaming - the values are saved as doubles during the calculations and then converted into a byte array, which is the buffer that is used in the clip.open() method call). It has no problems allocating the double array, the byte array, or populating the byte array. It is only thrown during clip.open() call. I also find it strange that it would work on two other computers, both of which have less RAM (it runs fine on a machine with 512MB and 2GB of RAM, both XP 32-bit). The only difference is that the computer with the issue is running Windows 7 (the RTM build), 64-bit with 6GB of RAM. I am running it through Netbeans 6.7.1 with memory options set to use up to 512MB - but it's never gone up that far before. And I've checked the size of the buffer on all three computers and they are all the same.
    Does anyone know what the issue could be or how to resolve it? I am using JDK6 if that matters. Thank you for your time.
    Edited by: Sengin on Sep 18, 2009 9:40 PM

    Thanks for your answer. I'll try that.
    I figured it had something to do with Windows 7 since it technically hasn't been released yet (however I have the RTM version thanks to a group at my univeristy in cahoots with Microsoft which allows some students to get various Microsoft products for $12).
    Edit: I just changed the Clip to a SourceDataLine (and the few other necessary changes like changing the way the DataLine.Info object was created) and wrote the whole buffer into it, drained the line and then closed it. It works fine. I'll mark the question as answered, however that may not be the "correct" answer (perhaps it does have something to do with Windows 7 and not being completely tested yet). Thanks.
    Edited by: Sengin on Sep 21, 2009 8:44 PM
    Edited by: Sengin on Sep 21, 2009 8:46 PM

  • HT3275 my time machine says the backup is too large but it should only be incremental

    I have time machine trying to back up my mac (OSX10.6) to a time capsule but it gives the error:
    "This backup is too large for the backup disk. The backup requires 240.66 GB but only 8.25 GB are available."
    This time capsule is used for backups on multiple macs in our house and has previously performed a successful full backup for this mac. I thought it would just delete old backups to create space for new ones, but it doesn't seem to want to do this.
    How can I fix this?

    TM often seems unable to fix the old backups if the disk is used by several computers.. so this is not unusual.
    You either need to delete the sparsebundle for your computer and start a fresh backup.. 240GB is a lot of stuff btw.. is it restarting or corrupted an old backup and needs to restart.
    The alternative is to use a USB drive connected to the TC and use that as the TM target. A local external disk would do the same thing of course.

  • Error: Backup too large, but I have more than it needs

    Today I started getting a funny Time Machine Error:
    "This backup is too large for the backup volume. The backup requires 4.3 GB but only 4.6 GB are available."
    Yes, you read that right. It requires less than is available and still fails with this error. What's going on?
    More to the point, how do I fix this short of excluding items to backup? I thought TM would start dumping the old backup items to make room for the new. This obviously isn't happening.

    Exactly. I captured two of the screens with that type of error message. Here's a link to one of them.
    http://www.dt-concepts.com/images/error3.png
    Also, why doesn't the system just remove the oldest backup? I thought that was supposed to happen automatically.
    Randy

  • Back up purchases, file too large

    Hi. I have itunes 10 and have been running into a problem backing up purchases. I have a CD writer/dvd reader on my laptop. When I go to back up my purchases, it tells me that I have a file that is too large for a cd and I need to insert a dvd. I am given no other options. The only thing I can do at this point is cancel the back up. I don't have a dvd writer so I just haven't been able to back up my purchases and I'm getting nervous because they are just piling up.

    It was my understanding that rather than being just a copying mechanism, it held licenses and permissions for my purchased music
    No.
    The computer holds the authorization
    that might not be present just by burning my purchased music to cd since the cd's won't actually "play"
    The backup CDs will not "play" because they are not audio CDs. They are data CDs. An audio CD will only hold ~15-20 songs. A data CD will hold ~120 songs.
    I assumed it was more than just music files
    It is also the library files whcih hold additional data (ratings and such) that are not actually part of the music files.
    Would you recommend just making a compressed copy of my itunes folder in an alternate location?
    You would not get much compression since the files are already compressed but yes, making a backup in an alternate location (on a completely different drive) is what you should do. You can use SyncToy as recommended by turingtest2.

  • Very large file 1.6 GB..sports program for school. lots of photos, template where media spots saved and dropped photos in..trying to get it to printer swho says its too large but when reduces size loses all quality...HELP??

    Please help...large file my sons Athletic program. Had noto problem with Quality last year..this new printer said file is too large..too many layers, can I FLATTEN..He reduced size and photos look awful. It is 81 pages. Have to have complete before next friday!! Help anyone??

    At that size it sounds like you have inserted lots of photos at too large a size and resolution.
    Especially for a year book style project, first determine your image sizes and crop and fix the resolution to 300 dpi, then drag them into the publication. Pages does not use external references to files and rapidly grows to quite large size unless you trim and size your images before placement.
    Peter

  • Project too large but under 2 hrs...how do i fit?

    Compiled project is 108.5 MB too large for currently selected disc media.
    How do I lower the bitrate or quality to fit?

    http://dvdstepbystep.com/faqs_7.php
    Make the audio AC3 if you have not done so and you probably do not have to reencode video
    FWIW another thread with more info/links if needed
    http://discussions.apple.com/thread.jspa?messageID=5127726

  • I am trying to upload an imovie to youtube. it says project too large but i have permission for larger projects. Help and thanks.

    I am trying to upload an imovie to youtube. It keeps saying "project too large" even though I have permission from youtube for over 15 minutes. Please help. Thanks.

    share the video via a quicktime movie in whatever format you want to use, I usually create an mp4.  Once you that video is set (I usually save to my desktop) go ahead and upload from YouTube rather than going direct from iMovie.  I suspect you will not have the same size issue.

  • I backed up my iphon eto cloud but i do not see  the changes

    i backed up my iphone to the cloud, it is showing on the phone but i can not see the changes on the website

    You go to (on your phone) Settings > iCloud > Storage & Backup > Managae Storage, and select your device, and it will tell you when it was last backed up. It's also printed below the "Back Up Now" button in the Storage & Backup menu.

  • HT201269 I am trying to restore an old back up to a new phone but it will not allow because it says the "old iphone" password is incorrect but the password I am using is the only password I have?? Help?  What does this mean?

    I am trying to restore an old iphone to a new iphone but it will not allow becaue it says the "old iphone" password is incorrect but the passwork I am using works for my ITunes account and is the only password I have..?? Please help!!  Thank you.

    When using the iPhone with the Windows OS, you need to have the Apple Mobile Device Service running. It should start automatically when you start the computer, but sometimes things happen. Use this support document to try and restart the service. See if that helps.
    http://support.apple.com/kb/TS1567

Maybe you are looking for

  • Idoc-XI-Idoc Scenario

    Dear All, I am working on Idoc-XI-Idoc scenario in which I am getting ORDRSP Idoc in input. In one of its segment I am getting value as either A or B. If value is coming as A in input then in the output we want PORDCR101 Idoc but if we have B as valu

  • Online collaboration using WebDAV not working in Acrobat pro XI

    We are using WebDAV for online collaboration (FDD based). We have just now upgraded to Acrobat pro XI. But since then we are not able to do the online collaboration. Send and Receive comments button is not shown when pdf file gets opened in the brows

  • Table Name in R/3

    Hi, How do i get the table name using the structure while looking the technical help in R/3 for the fields in the reports. when i see at the F1 help for technical information in the fields of the queries in ECC. I get technical name of the field and

  • Problem with custom_logic badi and it_param - ujk_large_string 1024

    Hi experts, I have a Problem triggering a script with custom logic badi. I try to implement a data and comment copy package for alle dimensions with source and target. Target is pushed in one string to IT_PARAM table of type UJK_T_SCRIPT_LOGIC_HASHTA

  • Problem printing color only prints Black

    My printer does not print the colors it shows in the display that they in and installed correctly but do not print out on the info page .It only prints out black.Example if I print a coupon the stuff on it that is in color is just blank