Backed up data dvd-rw will not mount on my desktop?

a few months ago, i used retrospect to backup files onto five verbatim dvd-rw disks. the backups went fine and after they each were done i checked them to make sure that the backup was successful (which in all cases it was). recently i wanted to update those backups. but when i put each disc into my superdrive only one of the five disks mounted. the other four didn't show up on the desktop. because one of the disks worked i'm really at a loss as to why the other four didn't. is there any way to force a disk like this to mount so that i can erase and reformat it? i beginning to think that dvd-rw technology needs resuscitation. any help would be greatly appreciated!

I can try a lot of things, and waste a lot of money in the process. I would like to know if anyone has experiences of a way to get my photos out of a SD card that won't mount to the desktop.
BTW- TopTenReviews looks like a scam to me. Its hard to believe that one program out of ten is the best at everything, and they just happen to be able to sell it to you???

Similar Messages

When connecting to server the other computers will not mount on the desktop

Hello
I have three computers connected wireless and ethernet. When connecting to the imac and mac pro with my macbook pro the other computers will not mount on the desktop. I have never had a problem like this before.
The imac and mac pro will mount the laptop or imac and the imac will mount the mac pro and laptop.
When I connect to the server with the laptop I can access everything thru the shared folders but nothing will mount on the laptop desktop using the, connect to server.
External HD connected with firewire will mount and the internal cd/dvd will mount.
I have ran permissions repair on the laptop. Have I accidently changed some configuration I am not aware of?
Any help or advice is greatly appreciated
Thank You
Dick

Dick,
I know this sounds silly but while in Finder goto (Finder)/(Preferences) and then make sure your on the (General) tab, make sure all the things you want to show are checked.
If that doesn't help move the com.apple.finder.plist to the desktop you can find in in ~/Library/Preferences ( ~ = Your Home Folder), log out/log in, and see if that fixes the problem if not go ahead and move the plist file back.
hope that helps,
Weston

My external hard drive will not mount on the desktop?

My external hard drive no longer mounts on my desktop, the hard drive has been checked & is working-has anyone ideas?

Hello cuckoo55,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Mac OS X v10.6: How to show your hard drive icon on the desktop
http://support.apple.com/kb/HT3746
In the Finder, choose Preferences from the Finder menu.
Click the General icon on the toolbar.
Select "Hard disks" in the "Show these items on the desktop:" section.
Close the Finder Preferences window.
Best of luck,
Mario

External MAC dvd device will not mount

Worked fine yesterday. Today doesn't show up. I cant eject the dvd thats in it - no button on it and the eject key is grayed out.
Doesn't show up in Disk Utlities etc. Its like it isn't there.
Thanks for any advice.
Chris

Have you rebooted the computer?
Does the drive show in About this Mac>More Info>System Report under USB (assuming USB connection)
Maybe this to eject
If you can't eject a CD or DVD or open the drive tray

OWC Mercury ext. drive will not mount via FW 800

Hi,
I just tried to hook up my OWC Mercury ext. drive to my new Mac Pro via FW 800 on the back panel and the drive will not mount. It does not show up using disk utility. Any suggestions would be greatly appreciated. Thanks, Mike

Try shutting everything down, and unplugging everything for 10-15 minutes.
Then, plug things back in in this order: the external drive firewire cable at both ends; the mac's keyboard and mouse, then the AC power for the mac and the external drive, and lastly, anything else you have hooked up.
Turn on the external drive first, then start up the mac and see if it shows up.

External Hard drive will not mount on desktop

I have a 17" Powerbook G4 that has replaced a broken iBook G4. I've been using a Western Digital MyBook Pro Edition as a secondary drive for my multimedia as well as my iTunes Library. It worked fine on the old iBook.
When I plug it into the Powerbook, using either USB2 or Firewire 800, it will not mount to the desktop. It DOES however appear in the System Profiler as "External HD Button and Lights". The drive is formatted for FAT32 and works fine on my Windows XP desktop machine, so I know the drive functions mechanically. A different hard drive, a Maxtor mounts to the desktop fine using USB2, so it isn't a bus issue.
This is driving me nuts. I LOVE this computer, but I have WAY more invested in music than the cost of the computer.
Thanks in advance.
Message was edited by: hempomatic

It took a while to figure it out but apparently there was a conflict with bluetooth. I disabled it and all is well.

External drive will not mount to desktop

Ok so i just bought a new hard drive and hooked everything up to my imac. However, it will not mount to my desktop.
1. I opened disc utility and i can see that my newly purchased hard drive is listed on the LHS with 931 GB available.
2. I click on the mount button on the top and i get this message- "The disk “disk1s1” could not be mounted. Try running First Aid on the disk and then retry mounting."
3. So now i click on First Aid and attempt to repair disc, however I get this message-"Disk Utility stopped repairing “disk1s1” because the following error was encountered: Filesystem verify or repair failed."
Does anyone have any idea how to fix this problem?
Thanks in advance.

how did that solve the issue? my 350gb seagate drive just started behaving the same way as your initial post -- it shows in Disk Utility but will not mount -- even after running disk repair/verify. This just started happening two days ago...

Lsince update to lion osx my imac will not mount windows created video dvds my othe imac running snow leopard will

since update to lion osx my imac will not mount windows created video dvds my other imac running snow leopard will

You could've backed up your iPad prior to the "forced" upgrade which, by the way, you could have cancelled. iTunes doesn't upgrade your iPad, automatically, on its own. You had to click the Upgrade button to initiate the upgrade. You didn't have to do anything with that button. You can just leave it be.
iOS 8 is garbage on iPad 2 and 3 and even though iTunes keeps giving me the Update button option, I continually choose to ignore it.
Ignoring the Upgrade/Update button doesn't affect the normal iTunes/iDevice syncing/backing up operations.
You could've just left that button alone.
When was the last time you backed up your iPad?
While there is no way way to revert to a previous iOS version once you upgrade your iDevices iOS, iTunes saves multiple backups of your iDevice and if you backed up your iPad previously to this latest activity, you should be able to restore your iPad from an older backup that should appear by date when you plug your iDevice into your Mac, was for iTunes to launch and sync your iPad, then cancel the backup in progress and use the Restore function in iTunes to restore your iDevice from another previous backup version date.
If your current version of iTunes doesn't recognize your iPad2 under iOS 8, you need to check the iTunes update feature, in iTunes or in OS X Software Update feature in OS X Preferences panel to see if there is a iTunes update available for OS X 10.6.8 Snow Leopard.

Burned DVD will not mount correctly

I have burned a dvd on my macpro and everything completed correctly. However, when I put the disc back into the drive, it does not mount correctly. The title I gave to the disc not there (it mounts as "Untitled.fpbf") and no files appear.
Ironically, I can put the DVD into another mac or pc and the title and files are on the disc.
Is there a cache file i need to delete?

The key to this little mystery is in the ".fpbf" which is evidently the designation for a Finder Backup Burnable Archive file. From what little research I've done (never had the problem myself) it's not clear how the suffix gets attached, but it has become a popular topic lately. Googling .fpbf will get you started and with any luck this post will bump you to the top of the list and get you someone with more specific info.
good luck

My Seagate 3TB GoFlex back up will not mount. Is this a Mavericks issue?

My 3TB Seagate GoFlex Desk is used as my Macbook Air back up and worked perfectly until today. However now it will not mount and when i go to repair disk i am told it cannot be repaired and must be reformatted, thereby losing all data.
I have now read all over the web and on these forums that there are multiple instances of problems like this. Can anyone provide me with information on what I can do to recover my data? There is lots of debate but no obvious solution....

Try DiskDrill or DataRescue - both programs show previews if they can recover data.
Alex
Apple Certified Support Professional

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

Dvd will not mount on my MacBook Pro

dvd will not mount on my MacBook Pro. The disc will spin up briefly, then spin down and then eject.

Check Finder / Preferences - General
Make sure CDs, DVDs, etc is selected.

DvD will not mount but cd-r will When I install the the disc into the super drive the format box comes up which is not the same box that comes up when installing a cd-r.

DvD will not mount but cd-r will When I install the the disc into the super drive the format box (disc utilities) comes up which is not the same box that comes up when installing a cd-r. I check the priference settings under general and it is set to show on the desk top.

Not yet will have to get one from a freind. I bought a stack of the Sony DVD+R and that is all I have.

How do I repair a hard drive that was being written to while my MacBook Air crashed? (Drive will not mount)

My external backup drive will not mount. I have tried to mount it in Disk Utility via the app and the command prompt but the attempt times out. Any suggestions?
I backed up my HD the day before dropping off my Mac for repair, and then tried again just before going to my appointment. During this last and final backup my Macbook Air crashed. I have since discovered that the drive will no longer mount, likely due to the crash that occured during the last attempted backup. I am unsure if the drive can be repaired.
My logic board was short circuiting some where that controls the headphone jack. Initially this prevented me from using the jack but eventually caused my mac to crash several times before I brought it in for repair. I believe that it is the this crashing that is responsible for my back up not being accessible but that my data may still be intact.
Thanks for any help you may have!

If possible, attach it to another Mac and see if it is recognized in Disk Utility. If so, run Disk Utility>First Aid. If not, the HDD may be damaged.
Ciao.

Hard drive will not mount shows up in Disk Utility

I have an external drive with a bootable OS X 10.6.8. I was in a transition between building up a SSD swapped drive. The SSD is installed in the CPU box but I have my old installation running from an external.
I have several external hard drives. They are all Firewire. Some have USB 3.0 and or eSATA options but my MacMini only talks to Firewire and USB 2.0.
I understand that you daisy chain Firewire drives and turn them on and off in sequence as they fall from the CPU box/case.
Firewire is a power source. I run the external with the OS using an AC adapter but one Firewire drive is powered through Firewire.
I have had as many as 4 external drives running along with the internal drive without a glitch while I was reorganizing files.
Today I booted off the external drive. It was running fine. I turned on one Firewire drive (the one that runs on Firewire power). That drive stumbled. I recognized the sound when there is an interruption in power. This cause the external boot drive to stall. I had to force a reboot.
Now the external boot drive will not boot up. It does not mount but Disk Utility sees it. The drive itself is bright and clear in Disk Utility but the partition (single) is faded out. I can run Verify and repair in DU. DU says it doesn't see anything to repair. It will not mount on its own or when I click the Mount button in DU. It does not produce an icon on the Desktop (because it is not mounting).
I also have SpeedTools. But although it sees the drive I cannot do anything with it. None of its tools run more than a spli second before they fail.
This drive has USB 3.0 and I see everything through USB that I see through Firewire. Connecting the other way did not get around the problem.
Of course I will buy an AC adapter for every external drive and never run them using Firewire again but the horse is out of the barn.
I have the original installation disks and could run the Archive and Install option but it would require physically swapping drives with the internal. I'd like to avoid it if possible. It is a MacMini and tedious.
Any suggestions?

I took the problematic hard drive and installed it in my Mac Mini so I could attempt a Safe Boot and then Archive and Install if necessary.
Safe Mode didn't work. The drive produced the circle with a slash symbol.
I reset the PRAM which was part of a list of steps to work through I found created by Apple Support.
I was able to boot up to Verbose Mode and view the text of the boot process. I wrote it all down. I can answer questions about the content better than typing it all out exactly. It includes, "...journal magic is bad..." "...failed to open..." and ends with "...cannot mount root, errno = 19"
I attempted Archive and Install however when it went to show what target drives were available it was a blank box and all buttons were grayed out.
I rebooted and opened Disk Utility from the DVD. The drive appeared the same with the top main line bright and the partitioned volume faded. Still was unable to mount. I ran Verify and this time a red line of text appeared "Invalid content in Journal" and at the end I ran Repair. When running I could read line by line and at one point it showed "checking volume information" then the following line "Repairing volume" the following line "Rechecking volume" more line of checking then it ended with "The volume was repaired successfully."
It still would not mount. I ran Verify again and again said "Invalid content in Journal" and this time it stopped midway saying "The volume was found corrupt and needs to be repaired. Error: This disk needs to be repaired. Click Repair Disk."
I clicked Repair and it ended with The vol. was repaired successfully."
Still unable to mount I began repeating Repair over and over. Each time it found something to repair and ended with a success message. After several more Repairs I tried Verify and it stopped midway saying to Repair the disk.
Question: Does running Repair multiple times continue to correct bits and pieces little by little or is this a generic message and we should treat it as a problem Disk Utility cannot pinpoint and is just beating its head against the wall?
The step by step instructions I downloaded mentioned running Repair more than once but it did not say that running it 20 times would erode some problems and eventually lead to a fully repaired disk (if the problem was something DU could take care of in the first place). At this point I have run Repair about 20 times total with a series of 10 back to back skipping Verify. I keep seeing the lines about invalid content in a journal and that it repaired something successfully. Yet I still cannot mount the disk.

Backed up data dvd-rw will not mount on my desktop?

Similar Messages

Maybe you are looking for