Backed up music on external drive doesnt show on new computer

k, I backed up my music onto an external drive. I go into another computer of mine and tell it that the library is on this external drive. It knows this and for what i'm concerned it puts music to it. But it doesnt show my existing music that i downloaded on the first computer or the purchases that i have made on on the other computer? Should it show these? do i just start over [which is not what i want to do]? Do I update?

decided to backup my iTunes library to an external hard drive incase of a crash so I dont loose my precious music. So I went into my preferences, Advanced, and changed the iTunes folder location to my external, and consolidated the library which backed up my files to the drive
This is not a backup. This copies everything in iTunes to the new location and iTunes will use that location from now on.
The music located in /Music/iTunesiTunes music/ folder is no longer needed or used by iTunes.
However whenever I would click a song to play it said it could not find the file
iTunes was looking for it on the external (which you probably unplugged/umnounted).
I am wondering since I backed up the library to the external drive
You did not back up the library to the external.
You consolidated everything in iTunes to the external and iTunes will use that.
As Jim noted, if you want to to backup, copy the entire iTunes folder.
Jim'
If you somehow lost it, look for it in the "Previous iTunes Libraries" folder in your music folder.
The itl file gets copied into the *Previous iTunes Libraries* folder only when you update iTunes.

Similar Messages

  • Moving music from external drive to new computer, not showing music

    Hello,
    I was running iTunes 7 or 8 on Windows XP on a laptop. I ran out of room on the laptop and followed Apple's doc to move library to external drive and point iTunes to the new location. It's been working that way for over a year.
    Old laptop crashed and I purchased a new laptop running Windows 7. The external drive is fine, and I was able to restore info and pics backed up to that drive on my new laptop. I installed iTunes 9 on the new laptop and tried several things to get it to see the music folder on the external drive, but it doesn't see the music at all. I even copied everything to the iTunes Media folder on the new laptop, but nothing shows up at all. I assume it has to do with what library files are available and where they're located. There are no library files on external drive, only a My New Music Folder. The old laptop can be on for about 10 minutes before it crashes, so I could try to retrieve the old library files if I knew what I needed and where to find them, but I hope I can do it without having to turn on old laptop. Any help is much appreciated. Are my playlists gone? Help!

    If everything on the external drive is in WMA format then that method would work, otherwise you are likely to get duplicates, which is why I suggested you work with the Not Added folder.
    Different audio formats have different ways of compressing and storing the information from the original source. Most software and hardware will only work with a limited range of formats. iTunes cannot play WMA directly, but can convert it to one of the formats it will play. Given this is a clean install of iTunes that format is likely to be AAC if you haven't changed it. MP3 may be a better choice if you might want to put the media on some non-Apple device in future, otherwise ACC is supposedly slight more efficient, i.e. a smaller file for the same quality.
    The main factor affecting file size is bit rate. The more original data that is kept, the larger the file and the more closely the reproduced music will match the original source. WMA is a lossy format typical bit rates are 128kbs and 256kbs. Conveting a 128kbs file to, for example, a 256k AAC file results in a file larger than the original, but no better quality.
    If you put Windows Explorer in details view you should be able to enable a bitrate column and scan through to see what the current values are. You can adjust your import settings as given. You may want to import in more than one batch if there is a mix of bitrates.
    tt2

  • I moved all my music from c: drive(because it was full) to an external harddrive and now itunes can't find any of my music. Is there a way to get Itunes to find music on external drive without having to place all the music back onto the c: drive? Thanks

    I moved all my music from c: drive(because it was full) to an external harddrive and now itunes can't find any of my music. Is there a way to get Itunes to find music on external drive without having to place all the music back onto the c: drive? Thanks

    Hopefully you moved the entire iTunes Media (or iTunes Music) folder to a new path on your external drive. Copy your iTunes library folder out to the root of the external drive, e.g. X:\iTunes (where X: is your external drive), then move the media folder inside it. Hold down shift as you start iTUnes and keep holding untila asked to choose or create a library. Choose the library at X:\iTunes\iTunes Library.itl. Should all be good.
    Failing that, download and run my FindTracks script and point it at the new location of your media folder.
    tt2

  • , I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive. Still syncing with i-Pod but playlists lost , podcasts no longer syncing, Can't play music .. how to restore back to original state .

    I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive.Cant play any music as it "can't find" the library  Still syncing with i-Pod but playlists lost , podcasts no longer syncing.   How to restore back to original state . I have tried re-installing  - with no change

    I do the same thing as you do...
    My music is on an external drive as to not use up gigabytes of storage that need not be used for media.
    There are a couple basic principles to iTunes that I believe you should know.
    1. iTunes is not a media storage program. It does not store your media "in iTunes". It simply is an organization tool for your media already on a hard disk.
    2. As iTunes is not a storage mechanism, it has no way to "know" whether or not the media that is listed is actually there. This is where the "design" of iTunes comes into play.
    I like to think of iTunes as a bread-crumb trail. The "music" in iTunes, isn't actually there. The bread crumb is the location on the external hard drive.
    If that bread crumb trail disappears (in this case the external drive you use). If said external drive is not plugged in, that bread crumb trail is not able to be followed. iTunes is "lost" and unable to find the media. The only way to remedy this is to place the media on your local drive.
    To address your issue of the library. If you hold down shift, you can select your library on your external drive. It will be a file with an .itl extension. The folder name will be your external drive.
    I go into edit > preferences > advanced and set my library to the correct location. Make sure you check the box "Copy to iTunes Folder when importing" (or whatever it says).
    You can't fix the issue of iTunes not seeing the media if your drive is unplugged unless you physically move the content to your OS HDD...Or any other HDD you use.

  • External drive not showing in Time Machine back ups

    ok, I have several problems, the first one being the fact that my external drive, where I have all my data, is not mounting or sometimes it mounts but soon dissapears. I was not worried at the beginning since I thought, that is why I have time machine, I have all my files backed up. However, the external drive does not show in any of my back ups. It dissapears from Time Machine too so all my previous back ups from the external drive dissapeared too. I have all those backups before. Any ideas of what is wrong? I have 10.5.8

    dakine2403 wrote:
    Thanks a lot. I am sure I am doing somethign wrong but since the external hard drive can not be seen any more, I don't see it either in any one of my back ups. It does not show anywhere.
    Also, my external drive gets detected sometimes, I run Repair Disk, it says it is fine, then it works for a while and then it stops working. I need to turn it off, then turn it back on and again it works for a while. I have run disk utility everyt time when the hard drive works and still says it is ok, then it stops working again after a while. Any ideas with either one of these problem ( or both)?
    Try other ports and cables. If it has a separate power supply, try plugging-it in to a different outlet. Make sure all the connections are secure. Can you try it on another computer?
    Your disk may be failing, or need a firmware update. Check with the maker's website, support and/or forums.

  • HT201250 Can I use Time Machine on two different Macs to back up to one external drive?

    Can I use Time Machine on two different Macs to back up to one external drive?
    I have one 1T Western Digital backup drive that works well with Time Machine and my MacBook Pro.  I now want to back up my wife's MacBook Air using Time Machine on her Mac and want to know if I can use the same WD external drive or if I need to get a 2nd back up drive?  If I can use one external drive for the two Macs do I need to do something special on the drive or will Time Machine do it automatically?

    Yes. You will need to configure Time Machine preferences on each computer to backup to the same drive. Note that you cannot connect the backup drive to both machines at the same time.

  • Cant seem to get a seagate external drive to show up in finder when on the

    cant seem to get a seagate external drive to show up in finder when on the airport extreme base station. ver 7.5 using 10.6.2 any special setting to show it up in finder?

    I tested a FAT 32 drive and it will show up.
    Open your Hard Drive and look for your AirPort Extreme under the SHARED heading
    Click the AirPort Extreme icon and then click Connect As at the upper right of the window
    Your drive should appear
    If not, click anywhere on your open desktop so that the Finder menus appear at the top of the screen
    Click Finder, then click Preferences, then click the General tab
    Under the heading of "Show these items on the desktop", make sure there is a check mark next to "Connected Servers"

  • How do I move a back up to another external drive and how does the Mac Book then find the new back up?

    how do I move a back up to another external drive and how does the Mac Book then find the new back up?
    I currently have the back up on a Time Capsule, I want to move it from the Time Capsule to another external hard drive.

    Did you read the link to the Pondidni website?  You will have to select the Time Machine HDD for the new MBP and the old one in System Preferences>Time Machine:
    Ciao.

  • Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings.  I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

    Had to wipe my drive so I could do a clean install of snow leopard.   Now I have look every where on how to move bookmarks, address book and I cal settings.  I have them back up on a external drive with Time machine but can not move, copy or restore my old settings.  The instructions I have found or no help or needs more clarafication on what to do.

    Use migration assistant to move your files.  http://support.apple.com/kb/HT4889

  • External drive not showing up on desktop

    I have an external hard drive (2T Newertech ministack). We had a power outage the other day. Even though the drive is on it no longer appears on the desktop. I went to Disk Utility and see if it could be repaired but the drive is not even showing up there. Does this mean the ministack was fried by the outage or is there another way I can save it? And yes, the finder preferences are on for external drives to show up on desktop.

    It's not likely it would be fried if it's connected to a UPS because then it would not lose power and crash. Have you tried disconnecting the device from the computer, rebooting the computer, then reconnecting the device?
    Since you have another Mac try directly connecting the device to it and using Disk Utility to repair the drive. Then give it a try on the other computer.

  • My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Tim

    My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
    routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
    David

    My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
    routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
    David

  • External drive not showing in sidebar

    I have set my Finder Preferences for the Sidebar to show connected servers and external drives. However, I can not get a mounted external drive to show under Devices in the sidebar. It has appeared previously, but now I can't get it to stick on the sidebar when dragging the external drive from the finder window to the sidebar. Noticed some older posts on the Internet from others experiencing this issue. Is there a fix?
    MacBook Pro RD, early 2013, OS 10.8.5, with attached Dell external monitor.

    Can you see it in Disk Utility? If so, try the mount command in the top menu bar.
    You can also try deleting the Finder .plist.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
    Re-launch Finder by logging out/in and test. If it works okay, delete the plist from the desktop.
    If the same, return the .plist to where you got it  from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

  • USB External drive not showing in Finder, or on Desktop

    I have two USB external drives from the same manufacturer. One is for regular storage, the second is for Time Machine and movies.
    The first one shows everywhere, on the desktop, in finder and in Disk Utility.
    The second drive shows in Disk Utility only. However, it is functioning fine with Time Machine. So it is mounted. I have tried several repairs, and it reports no fault found. So it is certainly functioning correctly, but a setting or error in the operating system is not allowing it to be viewed in finder, or on the desktop.
    Any suggestions.

    Correction: Title should be Firewire External drive not showing in Finder, or on Desktop.

  • I am trying to move previous Time Machine back ups off an external drive to my new Time Capsule. How do I do that?

    I have my previous time machine back ups on an external drive and I want to move those to my new 2tb Time Capsule. How can I make this happen?

    You probably cannot do it..
    The backup is very different from a local drive to a network drive.
    Look through the Pondini KB.
    http://pondini.org/TM/FAQ.html
    You can move the backup from a local to another local disk or network to another network.. but there are issues even doing that.
    IMHO.. don't... just start a new backup and keep what you already have saved up.. if you don't need it in 6months time.. or a year.. then you can wipe it.

  • HT201250 Time Machine cannot find my external back-up drive when I click on the "select disk" button.  No drive is found. I have run a Time Machine back-up to this external drive in the past.  I'm on the latest version of Snow Leopard.  Thank you!

    Time Machine cannot find my external back-up drive when I click on the "select disk" button.  No drive is listed. I have run a Time Machine back-up to this external drive in the past.    Any suggestions

    Does the disk appear in Disk Utility?

Maybe you are looking for

  • How do I create an iMessage account for my phone number?

    When I go into Messages---Preferences---Accounts--- + ------ the options are AIM, Yahoo, Google Talk, and Jabber.  Nothing for a phone number.

  • OBI Configuration issue in P6 8.3

    Hi, We have installed the OBIEE 11.1.1.7 and primavera p68.3 And configured the OBIEE with Primavera. While clicking the reports tab in primavera application its showing an error like "No Data is available because your p6user name is not valid for co

  • Query to find the users

    i have created user call mastermap osod boundary i need to get only above users in my query not the default and sample schemas like scott,dbsmnp...etc select username ifrom dba_users ....lists everyuser please let me know if any query for above reque

  • CIS initialization problem

    CIS configuration is working on JBoss 4.3 but when i am using jboss 5.1.1 eap i am getting exception "Caused by: com.stellent.cis.client.command.CommandConfigurationException: java.net.MalformedURLException: no !/ in spec" at application = CISApplica

  • GTK Theme Menu Border or Alternative

    I've been looking and looking and everything dead-ends with regards to this topic. Does anyone know of a way to put borders on the menu items for gtk themes? I'm currently using Openbox as my WM and utilizing LXApperance and Openbox Themes for GUI. T