Backend BSP session not closing on server after closing the window

Hi All,
We have SAP EP (7.0 SP21) and there is a BSP transaction ivew (Interaction Center ) intergrated in the portal. The issue is when the user performs any transactions inside the BSP and then closes the browser, session remains on the server till the timeout. Is there a way to end those sessions on server after closing the browser immediately?
Portal domain : xx.mycomp.com
ABAP system domain :mycom.com
Should the domains be same for the DSM of Portal to work or is there any solution that can be considered.
regards
Uday

Hi Uday,
These are the main issues that can cause issues with DSM:
JavaScript Origin Policy:
Scripting
between different domains is not allowed because of “JavaScript origin policy”.
Also
communication between mixed protocols (http\https) is forbidden.
Therefore
the portal server and the content server must be on the same domain and must
use the same protocol.
For
detailed explanation see:
http://mozilla.org/projects/security/components/same-origin.html
Popup Blocker:
•Popup blockers may cause troubles
in relation with SRA feature.
•Terminator handles notifications in
new window when current window is being destroyed (logoff, closing browser
window) – popup blocker prevents the opening of new window, hence no session
handling performed.
please also check SAP Note #596698 for more information typical problems and troubleshooting.
In general, the 2 domains should be the same.
xxx.mycomp.com, meaning that first part of the url can change but what comes after should be the same domain.
Best regards,
Etay

Similar Messages

  • Can not start Weblogic server after Reordering the provider

    Dear Geeks
    I have ran into big trouble. I defined a new authentication provider in the weblogic and set the Control Flag to 'Required'.
    I didn't realise that the user weblogic doesn't exist in the AD and because of AD's naming convention, we can not create a user named as weblogic.
    Since, the installation was done using the weblogic user and the authentication provider has been changed, is there a way to start the server back up.
    It is too critical and i am running out of time.
    I would appreciate if anyone out there could help.
    Thanks
    Regards
    ACM

    Hi,
    Goto Domain_home/config directory. Take one backup of config.xml, edit config.xml make Control Flag to SUFFICIENT against authentication provider that you have added. try to restart the server.
    please mark if this helps.
    Regards,
    Kishore

  • HT4623 iPhone 4s will not register with server after iOS 6 update

    My iPhone 4s will not register with server after iOS 6 update.  Does anyone has similar problem?

    Obviously since you have iOS 7 you're a developer.  As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum.  Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
    Thanks, and best of luck to you.
    GDG

  • The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

    The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

    Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • HT4972 my computer will not recognise my iphone after installing the latest version of itunes any ideas how to rectify this

    my computer will not recognise my iphone after installing the latest version of itunes any ideas how to fix this

    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • TS4002 I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

    I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

    Hi nguyen trong thang,
    I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are having issues activating your iPhone, you may find the troubleshooting steps in the following article helpful:
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/ts3424
    Regards,
    - Brenden

  • My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

    My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

    Now that you mentioned it, that might be the source of the problem. Something was definitely wrong with my graphics card before the incident happened. You mean that particular batch of graphics cards had some inherent issues, right? I went to the genius bar, and the 'genius' there, without trying to diagnose the problem properly, just adviced me to buy a new mbp! He said Apple will no longer try to fix or touch macs older than 5 yrs. Mine is 5.5 yrs old...

  • I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be

    I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be appreciated.

    Sounds like a verification issue on whatever marketplace you bought PS Touch from. Did you try contacting Google or Apple to see what they say?

  • URGENT: I lost the Lion Partition after repairing the Windows 7 partition

    URGENT: I lost the Lion Partition after repairing the Windows 7 partition
    I have recent bought a new Macbook Pro and then I start doing all the necessary setup. This is the first time I do such setup with bootcamp myself anyway.
    1st: normal MacOS setup, the Lion version has been setup perfectly.
    2nd: run the bootcamp and setup the Windows 7, done perfectly as well.
    3rd: try to partition and resize the harddrive with the Lion installed and create 2 new FAT partitions (now 4 partitions in total: 1 for Lion, Journaled, 1 for Windows 7 in NTFS, 2 for file sharing purposes in FAT). See if I can have better partitioning to do necessary organisations.
    4th: When I want to restart in Windows to see if the newly created 2 FAT partitions can be read in Windows environment and can function norally, the Windows setup does not show at the start up page when I hold the "Option" key during the startup. I then try to restart again, still no such partition but boot directly to Lion.
    5th: I tried to repair the Windows 7 with the start up disc and then it worked. I can also see the 2 newly partitioned FAT drive work normally.
    6th: When I want to restart in Lion, I cannot boot the Lion OS and I cannot find the start up icon on the startup page even with me holding the "Option" Key.
    7th: "MacOS Installation Utility" appears. I tried to repair but cannot as I have neither the Lion setup disc with me (coz the Lion has been pre-installed) nor a time machine backup/ any other backup image to load from.
    8th: Tried to "erase and install a new copy of Lion", the partition where the Lion has been previously installed cannot be shown, now indicate itself as "freespace" and not able to be selected for my "erase and reinstall" process.
    9th: so I go to 2 other FAT drives to do as the instructions to try "erase" and hope the "reinstall" process can be started. But the Disk Utility ends up saying the drive cannot be dismounted/ cannot verfy...
    At the end of the many tries, I tried to shut the computer down and restart again, hopefully something will work still.... the startup page now shows a disk image with ?, I guess NO OPERATION system/ drive detected for booting. So I got a piece of metals without any use now...
    Anybody help? Thanks alot!!

    In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
    and Boot Camp: Install or repair Boot Camp drivers.
    The other option is to use
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    How to Reset NVRAM on your Mac - Apple Support

  • HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp

  • My macbook pro (10.6.8 version) the screen turns blue, can not operate, forced shutdown, I installed the windows 7 Home Basic version.

    My macbook pro (10.6.8 version) the screen turns blue, can not operate, forced shutdown, I installed the windows 7 Home Basic version.

    To fix your issue is too complicated and lengthy to go into all of it here, it will require the services of person very familiar and experienced with Mac's to first recover your data and then restore OS X back to a functional state, then hopefully achieve the goals you were attempting.
    I advise you hire the services of a local Mac computer support technician experienced in these matters.
    Have them look at your Wifi and computer backup proceedures in the process.
    Good Luck.

  • After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up

    After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up
    I need to boot to macintosh but i cant see the drive nor to restore to the fastory settings through recovery HD, What can i do

    hold down the option key during boot it give you the option of what parition you wish to boot into

  • BSP session not dying when browser window closes

    Hi,
    I am having a small problem with the bsp session. I shall explain the prb with an example.
    Lets say i have a bsp application BSP1. I open the application from the Favorites tab in the SAPGUi.
    Initially, i have another browser window open containing google.com(this is imp that i have another browser open all the time containing anything). I now start BSP1, then i close the window by hitting the close button of the browser, as a result the controller sends a exit view back to the frontend which never gets displayed. now i start BSP1 again from SAPGUi, and the browser instead of showing me the logon screen and the start page goes to the exit page of the application. In other words to the last URL that i visited last time in the application. Somehow when the window is closed, the session on the applicaiton server is not dying. This only happens if i have any other browser open all the time containing any thing.
    If i do not have any other browser open, and then i follow the above sequence of events,everything runs smoothly. Also, in the previous case, if i close the google window also and start the application again, everything runs smoothly. In IE settings , in Advanced tab there is a setting for REUSE EXISTING WINDOWS FOR LAUNCHING SHORTCUTS. If i set this option, everything runs smoothly, even if i have a Google(whatever) window open all the time. If i do not set this option, i run into the problem as in the first case. Also, if instead of opening the application through the SAPGui i open another browser from the taskbar and type in the URL , everything runs smoothly inspite of another google window being opened all the time.
    Also this problem is evident in systems with BASIS 640/level 10 and BASIS 620/level 19. It might be present in other versions also but i am working on these two systems with these versions. This problem does not pop up on BASIS 700.
    If on exit, within the controller, i reset the keep_context attribute of RUNTIME  object, everything runs smoothly.
    could you please guide me as to what can be the problem here and how it can be solved. It is important. Any kind of help and guidance would be highly appreciated.
    Looking forward to your response,
    Thanks and best regards,
    Ghufran

    The very first important aspect to understand is that CANCEL kills the session long before the request reaches the ABAP stack. So what ever you want to do, this is not the way to go.
    From reading your first post in this thread through, I have the impression that you might have some confusion between stateful versus authentication. No, I it is not the problem/solution, but just that your very long descriptions without using consistant terminology makes it difficult to understand where we are going.
    Thus, I would recommending read this article for background information:<a href="/people/mark.finnern/blog/2003/09/24/bsp-in-depth-confusion-between-stateless-stateful-and-authentication">BSP In-Depth: Confusion between Stateless, Stateful and Authentication</a>.
    Next, you CAN NOT "redirect it to the browser on the onbeforeunload() event". Well, at least I never have never succeeded.
    Once the closed button is hit, you have not many options. One idea is a window.open, see system application for examples. The other is the image loading trick that Thomas describes in his weblog. Both ideas will actually solve your problems (once you really understand what is happening). This is unfortunately not always perfectly easy.
    brian

  • Open Sale Order Value (FD33) not getting diminished even after closing SO?

    Hi,
    Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
    What could be the reason ?
    Pls help.
    Regrds,
    Binayak

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

Maybe you are looking for