Backend PO creation - What is the fist BADI

Hi,
I want to know the first BADI that gets triggered after I click on "Create Purchase Order".
Regards,
Rajasekhar

Hi
Related SAP OSS Notes to go through ->
Note 1000184 - Account assignment error when document transfer to back end
Note 906465 - Shopping cart transfer:Mapping BADI bbp_create_po_back/...rs
Note 903805 - Shopping cart transfer: BAdI bbp_create_po_back/...rs_back
Note 336658 - Purch req instead of purch order created in backend
Note 528423 - Local purchase order not created
Please go through this ->
A local purchase order is to be created as a subsequent object for a shopping cart item in the EBP System.Although the item was approved, no local purchase order is created.In the application monitor (Transaction RZ20), you only find the uninformative message <CCMS:no default text available> under the node 'Shopping Basket -> Local errors'.
On the one hand, the value of the 'BSA' user attribute determines the document type with which purchasing documents are created in the back-end system while, on the other hand, however, for local purchase orders this value also determines the action type of the local purchase order (similarly to the DP_PROC_TY attribute, which determines the action type for direct purchase orders for material).
The system uses the transaction type to determine the number range interval, from which the document number is to be used for the local purchase order.If the system cannot determine any transaction type, it is then also not possible to determine a document number and the local purchase order cannot be generated.
You must make sure that whatever value is used is defined as a transaction type in EBP Customizing and that a valid internal number range interval for the purchase order object is assigned to this transaction type.
That is, when BSA = EC, then a valid 'EC' transaction type must be defined.
Only maintain one value (cross-system) for the 'BSA' attribute and set the default flag for this. Several system-dependent values for this attribute are not currently being analyzed on a system-dependent basis.
Do let me know.
Regards
- Atul

Similar Messages

What is the Exit / Badi triggered after PGI is done in VL02N???/

What is the Exit / Badi triggered after PGI is done in VL02N??/ Once PGI is done then i have to update some tables. so whats is the userexit or a bapi that is triggered ones the PGI is done.?????????????

BADI LE_SHP_GOODSMOVEMENT is called when the post goods issue is performed.
It handles a number of goods movements, so is_likp-lfart eq 'LF' will limit it down to goods movements for deliveries.

Batch user creation - what is the initial password?

Hello experts,
I'm trying to import a list of users using the batch import (User Administration -> Import) as described here:
[http://help.sap.com/saphelp_nwce711/helpdata/en/48/a8a834da282883e10000000a42189c/frameset.htm]
I see that the users are created in the UME.
What is the initial password for the newly created users?
Can I specify this somehow?
Best regards,
Florian

Hi Florian
Please check the following link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/41c43ac23cef2fe10000000a114084/content.htm
and
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/f6/0edf3d0eb8af5ee10000000a114084/content.htm
The link :
http://help.sap.com/saphelp_nwce711/helpdata/en/48/a8a834da282883e10000000a42189c/frameset.htm
itself contains ample info.Please go through the UME instructions.
Regards
Chen

What does the message ``Bad CPU type in executable'' mean in terminal window?

All the time I have been using TEX on my computer to handle mathematical symbols.
I have several macintosh machines.
Usually I used tex on the terminal (rather than texshop or texwork).
Quite recently when I input ``platex filename.tex,’’
I received the message ``Bad CPU type in executable.’’
On another machine, I receive the message which says “platex” failed: the
PowerPC architecture is no longer supported.
I have no idea why this happens.
Will anyone help me?
It occured when I typed ``platex foo.tex,'' in an attempt to compile a tex file.

PowerPC architecture is no longer supported.
This mean you have an old executable that was compiled for a Power PC Mac (the ones before they got the Intel chips). On systems running 10.6 (Snow Leopard) there was code called Rosetta that was able to run the PPC code on the Intel CPU, That went away in 10.7
Sounds like you recently upgraded to 10.8 from 10.6 or earlier and copied the binary to the new OS.
If you compiled the code yourself you need to recompile it for the new OS. If you installed the binary you need to go to the site you got the binary from and see if there is a newer version for Intel Macs.

Index creation; What should the ideal process be?

DB Version:11g R1
I maintain a db related to retailing and wareshousing. Last week, i issued a CREATE INDEX statement at around 8:00 pm which is a 'not so busy time' for DB and applications. But the temp tablespace ran out of space during this exercise. It was a nightmare.
Now, we have decided to follow a standardized process followed by experienced Oracle DBA professionals in the Industry. So, we would like to know what process you guys would follow if you are asked to CREATE or REBUILD Indexes.

I maintain a db related to retailing and wareshousing. Last week, i issued a CREATE INDEX statement at around 8:00 pm which is a 'not so busy time' for DB and applications. But the temp tablespace ran out of space during this exercise. It was a nightmare. Here are some tips:
http://searchoracle.techtarget.com/tip/Speed-up-Oracle-index-creation
http://mehrajdba.wordpress.com/2009/01/30/how-to-make-an-index-creation-faster/
HTH
Z.K.

What is the significance of badi BBP_Create_PO_Back?

Hi Friends
what is the significance of badi BBP_Create_PO_Back.?
Thanks & Regards
Kanni.
Edited by: Kanni. on Jun 21, 2009 10:41 AM

Hello,
BBP_CREATE_PO_BACK was used to pass additional data from SC to ECC PO.
This BADI is replaced by BBP_CREATE_BE_PO_NEW with SRM 5.0. Using this BADI you can change all the data that is transferred to the backend system for generation of a purchase order. This includes, for example, the item data, the account assignment data, and texts. All the shopping cart data is available as input parameters.
Hope this helps.
Thanks
Ashutosh

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

After installing the update I get this message on an app from facebook "502 Bad Gateway nginx" what is the issue and what do I need to do to solve the issue?

after installing the update I get this message on an app from facebook "502 Bad Gateway
nginx" what is the issue and what do I need to do to solve the issue?

Hi there, harleygirl.
A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

What is the BADI while SAVING purchase order using me22n?

what is the BADI while SAVING purchase order using me22n?
while i will save purchase order through me22n, badi should be fire what is badi for that?
regards,
dushyant.

Dushyant,
Hopefully you know how to implement the BADI ME_PROCESS_PO_CUST now.
The following are the codes that you can put in the method "Post".
DATA: LW_HEADER TYPE MEPOHEADER,
 LW_POSTED_HEADER TYPE MEPOHEADER,
 LW_VALID TYPE MMPUR_BOOL,
 ITAB_ITEM TYPE PURCHASE_ORDER_ITEMS,
 LW_ITEM TYPE MEPOITEM,
 ITEM_INTERFACE TYPE PURCHASE_ORDER_ITEM,
 ITAB_ACCT TYPE PURCHASE_ORDER_ACCOUNTINGS,
 ACCT_INTERFACE TYPE PURCHASE_ORDER_ACCOUNTING,
 LW_ACCT TYPE MEPOACCOUNTING,
 LW_POSTED_ACCT TYPE MEPOACCOUNTING,
 W_ACCT_CHANGED TYPE C,
 W_GRANT_AMT TYPE EKPO-NETWR,
 W_FINANCE_AMT TYPE EKPO-NETWR,
 W_FLAG TYPE C.
Check if PO header data is valid
CLEAR LW_VALID.
CALL METHOD IM_HEADER->IS_VALID
 RECEIVING
 RE_VALID = LW_VALID.
CHECK LW_VALID = 'X'.
PO header data is valid
Get the newly updated PO header data
CLEAR LW_HEADER.
CALL METHOD IM_HEADER->GET_DATA
 RECEIVING
 RE_DATA = LW_HEADER.
Get the posted PO header data
CLEAR LW_POSTED_HEADER.
CALL METHOD IM_HEADER->GET_PERSISTENT_DATA
 IMPORTING
 EX_DATA = LW_POSTED_HEADER
 EXCEPTIONS
 NO_DATA = 1.
IF SY-SUBRC <> 0.
 CLEAR LW_POSTED_HEADER.
ENDIF.
Get PO line items
REFRESH ITAB_ITEM.
CALL METHOD IM_HEADER->GET_ITEMS
 RECEIVING
 RE_ITEMS = ITAB_ITEM.
LOOP AT ITAB_ITEM INTO ITEM_INTERFACE.
Check if PO line item is valid
 CLEAR LW_VALID.
 CALL METHOD ITEM_INTERFACE-ITEM->IS_VALID
 RECEIVING
 RE_VALID = LW_VALID.
 IF LW_VALID <> 'X'.
This PO line item is not valid
 CLEAR W_ACCT_CHANGED.
 EXIT.
 ENDIF.
 CLEAR LW_ITEM.
 CALL METHOD ITEM_INTERFACE-ITEM->GET_DATA
 RECEIVING
 RE_DATA = LW_ITEM.
Get the account interface
 REFRESH ITAB_ACCT.
 CALL METHOD ITEM_INTERFACE-ITEM->GET_ACCOUNTINGS
 RECEIVING
 RE_ACCOUNTINGS = ITAB_ACCT.
 LOOP AT ITAB_ACCT INTO ACCT_INTERFACE.
 CLEAR LW_ACCT.
Get the newly updated PO item data
 CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_DATA
 RECEIVING
 RE_DATA = LW_ACCT.
 CLEAR LW_POSTED_ACCT.
Get the posted PO item data
 CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_PERSISTENT_DATA
 IMPORTING
 EX_DATA = LW_POSTED_ACCT
 EXCEPTIONS
 NO_DATA = 1.
 IF SY-SUBRC > 0.
 CLEAR LW_POSTED_ACCT.
 ENDIF.
 IF LW_ACCT-LOEKZ <> LW_POSTED_ACCT-LOEKZ OR
 LW_ACCT-KOSTL <> LW_POSTED_ACCT-KOSTL OR
 LW_ACCT-PRCTR <> LW_POSTED_ACCT-PRCTR OR
 LW_ACCT-PS_PSP_PNR <> LW_POSTED_ACCT-PS_PSP_PNR.
Account assignment was changed
We will force this PO to go through workflow
 W_ACCT_CHANGED = 'Y'.
 ENDIF.
 ENDLOOP.
ENDLOOP.

HT4910 documents edited on iphone, ipad, & mac what is the order of creation and editing and must each change be manually initiated to update the icloud

documents edited on iphone, ipad, & mac what is the order of creation and editing and must each change be manually initiated to update the icloud?

No idea what you mean by the firsy part of your question.
Documents edited on the Mac need manually uloading to iCloud at iCloud.com,documents edited on the mobile devices are updated automatically.

What is the "BW shell creation package for BW system" in TDMS?

I see for lower version of SAP systems such as 4.6 and BW(e.g.3.0, etc), there is a "shell creation package " for those
types of systems.
Could you explain what is that for?
Thanks!

1) where to find the info about the copy sequence such as: first shell creation, then initial package or whatever, then ...?
> TDMS solution operation guide will be helpful, the same is available at SAP service market place. In short the sequence is -
first shell (only if the repository is not in sync) then initial package (ex. TDTIM) and then refresh packages (as an when needed)
2) for HR we do not have shell creation, what we have is "initial package for master data and customizing" , the next step is "ERP initial package for HCM personel dev. PA & PD". Why we do not have shell creation here?
> For HR as only few objects are transfered the need of a full shell system does not arise. only the object to be transfered are synced.
3) Will TDMS replace system copy for ERP, BW, CRM completely?
> Shell will not replace them but we may say that it will supplement it. When you need a complete copy means repository along with application data then you need to go for system copy but if you only need repository to be copied from source to destination then shell is helpful. Also it should be noted that Shell is an TDMS package whereas System copy is a SAP standard tool.
I hope the above response is helpful.
Regards,
Pankaj

What is the best practice for BADI?

Hi all, this is my first post.
I've seen many BADI examples here at SDN and elsewhere where after defining the badi at SE18, and the implementation at SE19, you just create a Z program and call the badi and its method. No brainer. I know how to use the new badi of 'get badi' and 'call badi' instead of the classic exit handler. So I do know how to call a badi properly, in a Z program.
However, SAP's intention of BADI is to replace the traditional user exit. My question is how do you guys use badi in replacement of user exit?
User exits have 'call customer-functions' where you put your code in the Z includes, without touching standard SAP programs. Where/how do i link standard programs to call my badi? Even if I implement a standard bapi, my implementation is a Z. And a standard bapi and its methods are, well, standard. How do I call the Z stuff.
1. If using cmod, call customer-function and the z include to call my badi and method, how does that replace user exit if I'm still using cmod???
2. I've seen people add includes in a standard function-pool. The Z include calls the badi. But doing so is a modification, which I thought is to be avoided.
So my question is what is the best practice out there, how do you guys use badi for enhancement in replacement of user exit? In combination of cmod, adding includes in standard programs, other methods?

Hi Shawn,
Welcome to SDN
First thing, you got the whole concept of BADI partially wrong.
BADI are like user-exits only and the difference is it uses ABAP OO an some more functionalities.
As you find in the code CALL CUSTOMER FUNCTION, the same way there are exit handlers for BADI.
User Exits are not completely removed. They are still there and will be there. Its just the extra flexibility with BADI.
Regards,
Atish

What is the best Apple notebook for video editing and pro music creation?

What is the best Apple notebook for video editing and pro music creation?
I know I could opt for the most expensive and probably get what I want that way, but I´m not made of money, so what are your suggestions for minimum criteria and which would you recommend?

MacBooks Pro are great Macs with a good hardware, so all of them will work for the use you want, but I think that you want the biggest display possible because of your uses. In this case, it has to be a 15-inch non-Retina MacBook Pro, with the settings you want. Note that, after buying the Mac, you can upgrade the HDD and memory without voiding the warranty, so you are free to install as much memory and the HDD size you want after buying it. It's my opinion, but you are free to do whatever you think it's better

Backend PO creation - What is the fist BADI

Similar Messages

Maybe you are looking for