Backend Source of Supply not supported for Direct Material in SRM

Hi ,
When creating S/C or PO in SRM for Direct Material , backend Source of Supply ( i..e Purchasing Info Record or Backend Contracts ) not availble to select as a sourc of supply .
In our case, we are planning to maintain the sourc of supply (PIR or Contracts) in back end MM system only , then how can pick up the same ?
Can anyone please suggest on this .
Regards
NAP

NO Prashanta,
It is still pending for me . i just raised OSS message to SAP ...but SAP saying that
" I checked and found that in the classic scenario , Direct Materials cannot use backend contracts. The behavior described above is in accordance with the system design. Only local sources of supply (local contracts and interlinkages) can be
used in the direct material scenario, as well as as in the extended classic scenario . Therefore the above error message which you get "Specify a valid contract" is valid."
I replied with the doubt that "Thanks for reply but we are not convenience, since what we learnt from
different SAP Blogs, Below SAP help and SRM Experts discussion forum
is, for Ext Classic Scenario (since for direct materials it always
tales by default Ext Classic Scenario, although we implemented Classic)
Local SRM contract and Supplier List are the possible Source of Supply.
As per SAP help documentation for Self-Service Procurement (Extended
Classic) on below link
http://help.sap.com/saphelp_srm70/helpdata/en/e0/f6be5157a24340bf7b1279854a52e1/frameset.htm u201CYou can assign the sources proposed by the
system to items automatically (for example, if there is a single
contract for the item being procured) or manually in the case of a
quota arrangement, contract, or supplier from a supplier listu201D
As per SAP help documentation for Sourcing Using Supplier Lists on
below link,
http://help.sap.com/saphelp_srm70/helpdata/en/d8/33ec56f17f4404806072749f7e764f/frameset.htm u201CIn supplier lists, you can also manually allocate
back-end contracts from specific systems. This enables more effective
sourcing for back-end contractsu201D
In the Supplier List there is facility to enter the ECC Contract
Number. Supplier List donu2019t support local SRM contract. It supports
only ECC Contract /item.
As per your reply, do you mean to say that Source List is not a valid
Source of Supply for Direct Material in Classic Scenario (i.e. Ext
Classic scenario)? If not, then why the backend ECC Contract displays
as a Source of Supply, when we check the u201COrder as direct Materialu201D?
Kindly suggest"
Lets see.what SAP now replies.
Simultaniously I'm looking some enhancment
If you have nay update/soultion then please share with me.

Similar Messages

  • Getting error while creating PO for direct material in SRM 7.0

    While creating PO in SRM for direct material,i am getting the error as :Backend error-No Funds center entered/derivedin item 00001(3000/2211100).Please suggest me the solution

    Hi,
    We are using PPS functionality with SRM 7.0
    Regards,
    Gopal
    Edited by: gopalthadi on Feb 9, 2011 5:01 PM

  • Source of supply doesnu2019t work for SC items ordered as direct material.

    Hi there.
    We are working in SRM 5.0 with classic scenario.
    We are doing a SC with material code.
    We create a SC with two identical items. The only difference between items is: one item is order as direct material and the other one not.
    The problem is that for our item order as direct material, the system doesnu2019t propose any ECC contract or any ECC info record. But for our item not order as direct material, the system propose us ECC contract and ECC info record.
    So for SC items orders as direct material, the system never proposes any source of supply.
    However, in transaction BBPSOCO01 (Carry of sourcing) the systems propose source of supply OK for SC items with and without direct material.
    Any suggest?
    Thanks and regards.
    Raúl.

    Hi,
    The issue might be because when you choose, 'order as direct', the scenario changes from classic to extended classic, hence only local contracts are proposed in this case. Since you don't have anything local, you will not see any source of supply. Try using bbp_sos_badi instead and call all backend contracts using fm meta_sourcedeter_getsos_multi.
    Regards,
    Sanjeev

  • I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

    I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

    @Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
    If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

  • Source of supply () not in source list (27423/0010) despite source list req

    Hello,
    We have soon upgrading APO in 7.0 version.
    We have a SAP R/3 in 4.7 version.
    APO created Purchase Requirements in SAP R3 with two kind of processes :
    - Heuristics
    - Deployment
    In SAP R3 we have several database to maintain in order to affect correctly these Purchase Requirements to the good plant and the good scheduling agreement :
    - info record
    - scheduling agreement
    - source list in wich we attached the number of the scheduling agreement
    When we manage the heuristic, there is no problem .The Purchase Requirements are send via the C5 transaction.
    When we manage the deplyment, we have the message "Source of supply () not in source list (27423/0010) despite source list req" - The purchase requirements of the deployment are sent directly to SAP R3.
    I tried to compare the database of a OK item and a NOK item but I can'tfound something different.
    Have you ever had this kind of problem ?
    Thanks in advance for your help.

    Hi Jingco,
    I guess you have the PIR( Pur.Info record maintained ) in R/3 and CIFed to generate the Ext. Procurement relationship.
    Please check that the Source of Suppy in Source list (ME01) is same as maintained in PIR.
    revert back if still it doesn't help.
    Regards
    Kumar

  • Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

    Team , Thanks for looking into this  ..
    As a last resort on  optimizing my stored procedure ( Below ) i wanted to create a Selective XML index  ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
    Index feature is not supported for the current database version.. How ever
    EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
    Is there ANY alternative way i can optimize below stored proc ?
    Thanks in advance for your response(s) !
    /****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    -- EXEC [dbo].[MN_Process_DDLSchema_Changes]
    ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
    AS
    BEGIN
    SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
    SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
    select getdate() as getdate_0
    DECLARE @XML XML , @Prev_Insertion_time DATETIME
    -- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
    SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
    -- PRINT '1'
    CREATE TABLE #Temp
    EventName VARCHAR(100),
    Time_Stamp_EE DATETIME,
    ObjectName VARCHAR(100),
    ObjectType VARCHAR(100),
    DbName VARCHAR(100),
    ddl_Phase VARCHAR(50),
    ClientAppName VARCHAR(2000),
    ClientHostName VARCHAR(100),
    server_instance_name VARCHAR(100),
    ServerPrincipalName VARCHAR(100),
    nt_username varchar(100),
    SqlText NVARCHAR(MAX)
    CREATE TABLE #XML_Hold
    ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
    BufferXml XML
    select getdate() as getdate_01
    INSERT INTO #XML_Hold (BufferXml)
    SELECT
    CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
    FROM sys.dm_xe_session_targets xet
    INNER JOIN sys.dm_xe_sessions xes
    ON xes.address = xet.event_session_address
    WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
    --RETURN
    --SELECT * FROM #XML_Hold
    select getdate() as getdate_1
    -- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
    CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
    FOR
    PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
    --RETURN
    --CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
    --SELECT GETDATE() AS GETDATE_2
    -- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
    --CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
    --USING XML INDEX [IX_XML_Hold]
    ---- FOR VALUE
    -- --FOR PROPERTY
    -- FOR PATH
    --SELECT GETDATE() AS GETDATE_3
    --PRINT '2'
    -- RETURN
    SELECT GETDATE() GETDATE_3
    INSERT INTO #Temp
    EventName ,
    Time_Stamp_EE ,
    ObjectName ,
    ObjectType,
    DbName ,
    ddl_Phase ,
    ClientAppName ,
    ClientHostName,
    server_instance_name,
    nt_username,
    ServerPrincipalName ,
    SqlText
    SELECT
    p.q.value('@name[1]','varchar(100)') AS eventname,
    p.q.value('@timestamp[1]','datetime') AS timestampvalue,
    p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
    p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
    p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
    p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
    p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
    p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
    p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
    p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
    p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
    p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
    FROM #XML_Hold
    CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
    WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
    p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
    AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
    AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
    SELECT GETDATE() GETDATE_4
    -- SELECT * FROM #TEMP
    -- SELECT COUNT(*) FROM #TEMP
    -- SELECT GETDATE()
    -- RETURN
    -- PRINT '3'
    --RETURN
    INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
    [UserName]
    ,[DbName]
    ,[ObjectName]
    ,[client_app_name]
    ,[ClientHostName]
    ,[ServerName]
    ,[SQL_TEXT]
    ,[EE_Time_Stamp]
    ,[Event_Name]
    SELECT
    CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
    ELSE T.nt_username
    END
    ,T.DbName
    ,T.objectname
    ,T.clientappname
    ,t.ClientHostName
    ,T.server_instance_name
    ,T.sqltext
    ,T.Time_Stamp_EE
    ,T.eventname
    FROM
    #TEMP T
    /** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
    -- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
    WHERE ddl_Phase ='Commit'
    AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
    AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
    WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
    AND MN.[DbName] = T.DbName
    AND MN.[Event_Name] = T.EventName
    AND MN.[ObjectName]= T.ObjectName
    AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
    AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
    -- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
    --SELECT GETDATE()
    --PRINT '4'
    --RETURN
    SELECT
    top 100
    [EE_Time_Stamp]
    ,[ServerName]
    ,[DbName]
    ,[Event_Name]
    ,[ObjectName]
    ,[UserName]
    ,[SQL_TEXT]
    ,[client_app_name]
    ,[Created_Date]
    ,[ClientHostName]
    FROM
    [dbo].[MN_DDLSchema_Changes_log]
    ORDER BY [EE_Time_Stamp] desc
    -- select getdate()
    -- ** DELETE EVENTS after logging into Physical table
    -- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
    -- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
    -- SELECT @XML
    SELECT GETDATE() GETDATE_5
    END
    GO
    Rajkumar Yelugu

    @@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
        May 14 2014 18:34:29
        Copyright (c) Microsoft Corporation
        Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    (1 row(s) affected)
    Compatibility level is set to 110 .
    One of the limitation states - XML columns with a depth of more than 128 nested nodes
    How do i verify this ? Thanks .
    Rajkumar Yelugu

  • The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU - SharePoint Foundation 2013

    After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 Secure Store Service         
     Secure Store                   g0n6 High     The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
    trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.   at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
    operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
    e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
    has expired or Secure Store Shared Service is not supported for this SKU.    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)    
    at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     Getting Error Message for Exception System.Web.HttpUnhandledException
    (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage)     at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)    
    at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.86  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        aat87 Monitorable   b3b6e19b-7de2-e016-ad32-0fc975829ef0
    Is it a bug or any issue in configuration?
    Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
    Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.

    Hello
    something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
    1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
    1>  MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
    2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
    2>  Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
    2>  Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
    2>  Copying all files to temporary location below for package/publish:
    2>  obj\Debug\Package\PackageTmp.
    2>  Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
    2>  Adding sitemanifest (sitemanifest).
    2>  Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding declared parameter 'IIS Web Application Name'.
    2>  Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
    2>  file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
    2>  To get the instructions on how to deploy the web package please visit the following link:
    2>  http://go.microsoft.com/fwlink/?LinkId=124618
    2>  Sample script for deploying this package is generated at the following location:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
    2>  For this sample script, you can change the deploy parameters by changing the following file:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
    2>  Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
    3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    3>Active Deployment Configuration: Deploy App for SharePoint
    3>Uninstall app for SharePoint:
    3>  Skipping the uninstall step because the app for SharePoint is not installed on the server.
    3>Install app for SharePoint:
    3>  Uploading the app for SharePoint...
    3>  Creating a trusted root authority in SharePoint for IIS Express.
    3>  Installation is in progress (00:00:00)
    3>  Installation is in progress (00:00:01)
    3>  Installation is in progress (00:00:02)
    3>  Installation is in progress (00:00:03)
    3>  Installation is in progress (00:00:05)
    3>  Installation is in progress (00:00:06)
    3>  App failed to install, cleaning up...
    3>  App installation cleanup failed due to errors.  Please see the app on the SharePoint site’s “Site Contents” page for details.
    3>  App installation encountered the following errors:
    3> 
    3>  @"Error 1
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3> 
    3>  @"Error 2
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
    ========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
    ========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========

  • "error: thread-local storage not supported for this target"

    I have a program that uses the __thread specifier, to be run on a Solaris 9/UltraSprac.
    I am not able to compile it using gcc 3.4.4 or 4.0.4, it emits the msg "error: thread-local storage not supported for this target".
    xz@gamera% gcc -v -Wall -D_REENTRANT -c -o func_stack.o func_stack.c
    Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
    Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
    Thread model: posix
    gcc version 3.4.4
    /opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v7 -auxbase-strip func_stack.o -Wall -version -o /var/tmp//cc0poHSN.s
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /opt/gcc/3.4.4/include
    /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
    /usr/include
    End of search list.
    GNU C version 3.4.4 (sparc-sun-solaris2.8)
            compiled by GNU C version 3.4.4.
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    func_stack.c:16: error: thread-local storage not supported for this target
    func_stack.c:17: error: thread-local storage not supported for this target
    func_stack.c:19: error: thread-local storage not supported for this target
    xs@gamera% gcc -v -D_REENTRANT  -c -o func_stack.o func_stack.c
    Using built-in specs.
    Target: sparc-sun-solaris2.9
    Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
    Thread model: posix
    gcc version 4.0.4 (gccfss)
    /pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -I. -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v9 -auxbase-strip func_stack.o -version -m32 -o /tmp/ccjsdswh.s -r /tmp/cc2w4ZRo.ir
    ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
    ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
    /usr/sfw/include
    /usr/include
    End of search list.
    GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
            compiled by GNU C version 4.0.4 (gccfss).
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    func_stack.c:16: error: thread-local storage not supported for this target
    func_stack.c:17: error: thread-local storage not supported for this target
    func_stack.c:19: error: thread-local storage not supported for this targetJust as comparison, the corresponding output of compiling another file which does not have __thread declaration is as follows:
    xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
    Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
    Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
    Thread model: posix
    gcc version 3.4.4
    /opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v7 -auxbase-strip common.o -Wall -version -o /var/tmp//cc4VxrLz.s
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /opt/gcc/3.4.4/include
    /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
    /usr/include
    End of search list.
    GNU C version 3.4.4 (sparc-sun-solaris2.8)
            compiled by GNU C version 3.4.4.
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    /usr/ccs/bin/as -V -Qy -s -xarch=v8 -o common.o /var/tmp//cc4VxrLz.s
    /usr/ccs/bin/as: Sun WorkShop 6 update 2 Compiler Common 6.2 Solaris_9_CBE 2001/04/02Note that the last 2 lines seem to suggest that a Sun assembler is used as the back-end of gcc. I am not sure whether the failure to compile the first file (with __thread) was due to the incompatibility of this Sun assembler. In the first case, the error msg was emitted before these 2 lines are printed.
    I further read a post about gcc 3.3.3's inability to compile code that has __thread in it, on a HP-UX 11.11: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1216595175060+28353475&threadId=1148976 The conclusion seems to suggest that "the 2.17 GNU assembler did not support thread local storage" and gcc sees that and thus disallows TLS.
    If the assembler is the culprit, then does anyone know whether this "Sun WorkShop 6 update 2" assembler in my installation can work with TLS? And how come a Sun assembler becomes the back-end of gcc? I read that gas (the GNU assembler) is the default backend of gcc. (How) can one specify the assembler to be used for gcc?
    As an aside, I am able to compile my file on this same Solaris 9/UltraSparc platform using the Sun Studio 12 C Compiler:
    xz@gamera% cc -V -# -D_REENTRANT  -c -o func_stack.o func_stack.c
    cc: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12
    ### Note: NLSPATH = /pkg/SUNWspro/12/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/pkg/SUNWspro/12/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
    ###     command line files and options (expanded):
    ### -c -D_REENTRANT  -V func_stack.c -o func_stack.o
    /pkg/SUNWspro/12/prod/bin/acomp -xldscope=global -i func_stack.c -y-fbe -y/pkg/SUNWspro/12/prod/bin/fbe -y-xarch=generic -y-xmemalign=8i -y-o -yfunc_stack.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly -V -D_REENTRANT  -m32 -fparam_ir -Qy -D__SunOS_5_9 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix -D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun -Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/pkg/SUNWspro/12/prod/include/cc "-g/pkg/SUNWspro/12/prod/bin/cc -V -D_REENTRANT  -c -o func_stack.o " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
    acomp: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12Interestingly, the output no longer mentions the "/usr/ccs/bin/as: Sun WorkShop 6 update 2" assembler.

    Just as another comparison, I compiled a file without __thread on the Solaris 9/UltraSparc platform using gcc 4.0.4. Not surprisingly it worked. But I no longer see the mention of the Sun assembler as in the case of gcc 3.4.4. Nor did I see the mention of "GNU assembler" as in the case of gcc 4.0.4/Solaris 10/x86. Instead, I saw something called "iropt" and "cg". Does anyone know what they are?
    xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
    Using built-in specs.
    Target: sparc-sun-solaris2.9
    Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
    Thread model: posix
    gcc version 4.0.4 (gccfss)
    /pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v9 -auxbase-strip common.o -Wall -version -m32 -o /tmp/ccSGJIDD.s -r /tmp/ccKuJz76.ir
    ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
    ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
    /usr/sfw/include
    /usr/include
    End of search list.
    GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
            compiled by GNU C version 4.0.4 (gccfss).
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    /pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/iropt -F -xarch=v8plus -xchip=generic -O1 -xvector=no -xbuiltin=%none -xcache=generic -Qy -h_gcc -o /tmp/ccUl4mVM.ircg /tmp/ccKuJz76.ir -N/dev/null -is /tmp/ccSGJIDD.s
    /pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/cg -Qy -xarch=v8plus -xchip=generic -OO0 -T3 -Qiselect-C0 -Qrm:newregman:coalescing=0 -xcode=abs32 -xcache=generic -xmemalign=8i -il /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4//gccbuiltins.il -xvector=no -xthreadvar=no%dynamic -xbuiltin=%none -Qassembler-ounrefsym=0 -Qiselect-T0 -Qassembler-I -Qassembler-U -comdat -h_gcc -is /tmp/ccSGJIDD.s -ir /tmp/ccUl4mVM.ircg -oo common.o

  • Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message that X11 was not supported and directed to a sited to download XQuartz. Now when I try to launch WordSearch9 I get a message "X11 cannot be found.

    Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message saying that X11 was not supported and directed to a site to download an update "XQuartz" which I did. Now when I try to launch WordSearch9 I get a message "X11 cannot be found". I did follow the instructions to download and install XQuartz, but there still seems to be a problem. Anyone have an idea?

    Your report indicates Mountain Lion, but your footer indicates Lion.  I'll assume you're on 10.8.2; on the current Mountain Lion version.
    Rebooting is fine.
    The posted diagnostics look like there might be a problem with the Xquartz install, or it is not starting, or it's not authorized for the sandbox.  (But I don't know enough about that to be certain.)
    Try launching X11.app directly from your Applications > Utilities folder, and see if that works, or if shows any dialog boxes, or that reports any errors.
    If you had an Xquartz kit installed and it's not the 2.7.4 (current) Xquartz kit, then please update to that version.  (I'm assuming that site is where you got your Xquartz kit from, too.)
    I'd also suggest also discussing this more directly with the Xquartz folks via mailing list or the IRC channel, or collecting up the Xquartz logs and then posting a bug over at the Xquartz site; here are the details on bug reporting for Xquartz.

  • DVDPro3- "Device Not Supported for requested burn operation"

    Hello All,
    In build and format I get "device not supported for requested burn operation."
    On my iMac G4
    Using DVD Pro 3.0.2
    Mac OSX 10.3.9
    And a LaCie Superwriter external burner.
    Thanks for any suggestions,
    Al

    in case anyone else has a similar problem... SOLUTIONS:
    formating to hard disc as an .img and then burning with toast works.
    Also I found downloading and installing the device profile patches from www.patchburn.de got the burner to be recognised by both DVDSP and Disc Utility. Lot's of people recommend this source.
    Another tip was to zap the PRAM but that did nothing. Nor did deleting the preferences file.
    No idea why things stopped working in the first place but hope this helps others.

  • Getting Platform not supported for media spanning on Mac OSX

    Managed to get to unpack "Archive: j2eesdk-1_4-linux.bin"
    but getting
    warning [j2eesdk-1_4-linux.bin]: 343376 extra bytes at beginning or within zipfile
    (attempting to process anyway)
    In spirit I try the next step:
    java -cp package/PackageFormat.jar:. appserv
    but get:
    Platform not supported for media spanning: com.sun.wizards.media.Mac_os_xMediaSupport
    FYI The misc zip files (jdk, imq, ant etc ) are unexpanded
    Any advice most welcome!
    Tim

    Yes, I got this too when I tried that. I've analyzed the source for appserv.class. What Sun did was sneak in lots of classes into the tail end of the file and this class loads from itself. It's a ClassLoader. I don't see why they did this when they could have used a .jar. To look at debugging output, you can put the following command line flags on: -Dwizard.debug=true -Dwizard.debugClassLoading=true. Kind of interesting actually. To chase this further, one could hack the decompiled source to spit out the class files as it loads them so that they could be decompiled further, especially looking at the Linux implementation. Hopefully it could be stubbed out to work satisfactory enough.
    What I've done to get the J2EE.jar is rummage through the "packages" directory. I found both SUNWascmn.zip and SUNWasu.zip to have useful libraries. I also observed the libraries end in .jar.pack. The PackageFormat.jar file contains 2 classes, one for packing and one for unpacking. Check out the class sun.tools.pack.Unpack. It'll display usage. I ran this against some jar.pack's of interest to me, notable j2ee.jar.pack of course and it decompressed it. By the way, the pack format is JSR 200 http://www.jcp.org/en/jsr/detail?id=200 which is supposedly in Java 1.5.
    That was fun :-)
    But yeah... it really pisses me off that Sun doesn't seem to acknowledge Mac OS X as a Java platform for the language they developed to be cross platform. What irony!

  • Apple associated publishers for Ibook Store (example: Lulu, SmashWords) have not support for Ibook Author native format (.ibook)

    Apple associated publishers for Ibook Store (example: Lulu, SmashWords) have not support for Ibook Author native format (.ibook) how ebook source. Only Word archives are supported.
    Obtain TAX ID for non USA resident is impossible without pay to much money.
    How to publish in Ibookstore a non USA resident author, in new Ibook Author format?

    Regardless of what format you want to use, you can't publish in the iBookstore without meeting Apple's requirements, so if you find those too difficult, you need to go elsewhere.

  • Power view couldn't load the model or data source because the data source type is not supported

    Hi,
    I have SQL 2012 standard edition in my local. I have developed SSAS & deployed in local. I have been asked to develop power view report in excel 2013 using this SSAS. But when I tried to do in Excel 2013 professional Plus, I am getting below error:
    Power view couldn't load the model or data source because the data source type is not supported.
    Does power view is supported in standard edition of SQL or it requires Business/Enterprise edition of SQL server?
    Thanks in advance

    What type of SSAS install are you using?
    PowerView in Excel 2013 currently only supports Tabular data sources.
    Only PowerView in Sharepoint 2013 supports both Tabular and Multi-Dim data sources. (provided you have the required Sharepoint and SQL updates installed)
    http://darren.gosbell.com - please mark correct answers

  • Authentication with Edge, weinre is not supported for Fiddler

    Environment
    laptop- laptop Windows 7
    mobile- iOS iPad
    I installed Edge, the iOS client, chrome extension, as well as Fiddler and CharlesProxy. We have an app that requires authentication, and the UN/PW cannot be passed via URL params. I configured the iPad to use a proxy, as detailed in  http://blogs.adobe.com/edgeinspect/2012/05/16/shadow-charles-proxy-virtual-hosts-workflow/  Both proxy apps use port 8888 by default.  The site I am trying to hit is external and not a localhost. Here is what I am seeing so far.
    Using Fiddler, I am able to connect remotely, and essentially, what is shown on the iPad is a mirror of my laptop's chrome browser. The problem is that I am unable to initiate remote inspection using weinre, specifically, under the weinre remote button, my device is not listed
    Using Charles Proxy, again, I can connect remotely, but am unable to get past the authentication screen. However, weinre's remote inspection is working and my device is listed under devices. The request looks correct, but when I try to enter a valid UN/PW in the iPad, an error dialog shows with "server returned incorrect response type [200]".
    How is the correct way to authenticate with Charles? Or is there a way to have weinre attach correctly using Fiddler2?
    TIA.

    Hi Christian,
    The error you saw should only occur for a subscription used with a free trial offer type. Please use the below link to open a support ticket.
    http://azure.microsoft.com/en-us/support/options/
    You can check the following links for similar issues.
    The operation is not supported for your subscription offer type
    Could not submit the request to create database
    DBNAME. The operation is not supported for your subscription offer type
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • SRM 4.0: Source of Supplier not copying in line item on Shopping Cart

    We are using SRM 4.0 in an extended classic setup and currently experiencing a problem with the source of supplier not being copied on line items. The user stated that  when copying a line items in a shopping cart the source of supplier is not copying to the new line.  It happens sometimes but not everytime the client uses the line copy option.
    It was initially thought that based on the amount of the line item (>=$25,000) that would cause the source of supplier (vendor) not to copy to the new line item but it has been verified by client that is not the case.  If anyone has seen this issue and know of what the root cause could be please let me know.
    Thanks

    Yann,
    Actually this is occurring when the user is creating a shopping cart from scratch.  He added a line item either from catalog or free text, sources the item and then uses the copy function to copy the line item.  When the client does this the item is copied but the vendor disappears from the 2nd line item and client has to add it again. 
    So that OSS notes doesn't apply unless I'm missing something.

Maybe you are looking for