BACKEND SYNCH of rule and mitigations from CC 5.2 to ABAP system

Hi experts,
I did a backend synchronization of the GRC CC 5.2 rule set into my ABAP based R/3 system (which has the RTA 5.2 installed) and I was able to successfully see all the functions/risks/rules.
I have done the above in my sandbox. As per the config guide SAP only recommends that if there is a MIC installed, but I wanted to use it for a non-MIC system to have the back-end system be prepared incase the front-end GRC system is unavailable (DR situtation !!)
If you have use the mitigation control and rule synch with backend system in a non MIC scenario, I would appreciate your views
Thanks much
Kapil Ashar.

Hello Jennifer,
You are not the only one who has this problem. I have seen this problem. Issue is with the quality of the data (extra space here or extra tabs in the text file being loaded) being uploaded. Please check the files to be sure all data to be uploaded has required entries in the related txt files. Procedures work and original data does upload correctly if procedures are followed. Another problem is with location of the data being uploaded (data being uploaded is from the desktop are on the server).
Good luck! Please contact if you require any further clarification.

Similar Messages

How to create RULES and MITIGATION COUNTROLS in GRC 5.3

Hi,
We are working on GRC CC 5.3.Could you please refer some of step by step procedure documents for creating new RULES and MITIGATION COUNTROLS.
Thanks & Regards,
KKRao.

Hi KK,
Frank is right, it is not just technicla steps but clear understanding of what you want to mitigate.
I assume that-
1. You have a defined rulebook.
2. you have created all risks and rules are generated.
3. You have run risk analysis in your system.
4. You have now list of risks exposure in your system and your business people have to get a look on that and to decide what is to be removed and what they must retain to run business.
5. You have remediated all authorizations whic hare not neccessary at all.
Now you have list of mitigations.
You may do it at two levels-
First you need to clean all roles. Mitigate them.
Second user level-If user is getting violations via two roles, you need to decide whether you want ot keep them or not.
If not, then you will have to remove one/more roles.
If you want to keep, then you have to mitigate them.
Regards-Sabita
Mitigation procedure-
1. Create a naming convention which clearely states mitigation nature-e.g. which module it belongs to role and risks.
1. Create mitigation control and associate approver, monitor, risks to them,.
2. Mitigate Roles using contorls specifying which risks you want ot omitigate.
Same procedure for user mitigation.

How To: Synch Notes,SMS and Whatever from iPhone to Mac

When I saw that Mark/Space was planning to release a version of Missing Sync for iPhone my first reaction was: what for? But as it happens I think they've hit upon some needed features that are actually missing from the out-of-the-box iPhone experience. First is a Migration Assistant for moving contacts, calendar entries, and photos from a Palm, Windows Mobile, or Blackberry device onto your Mac and thence to the iPhone. It also syncs your SMS messages and call log to your Mac so you don't lose information when you hit the storage limits on the iPhone. Best of all, perhaps, is Notes syncing, which will allow you to view iPhone notes in Yojimbo, Entourage, or Mark/Space's Notebook application. Unfortunately, however, it appears that it's only one-way, from the iPhone to the Mac, and not vice versa. This lack two-way Notes syncing remains a puzzling lacuna as far as I'm concerned, and I'm looking forward to somebody, whether it be Apple or Mark/Space, filling this obvious hole in the iPhone feature set.
Missing Sync for iPhone won't be available until the 4th quarter and will sell for Mark/Space's normal price of $39.95, but crossgrades will be offered from other Missing Sync products.
From TUAW

Restore the device from your iTunes or iCloud backup.

Upload of Campaign and Leads from flat file into SAP CRM system

Hi Gurus,
We need to upload Campaign and Leads from our legacy systems to SAP CRM systems. The source data will be available in the form of flat files (tab delimited)
Please let me know the possible ways of doing this.
Reward points are assured.
Thanks in advance.

Hi
you can use external list management functionality in CRM 5.0 useing the flat file tab delimited you can upload the contacts and create business partners followed by lead transaction types with business partners created and also external list management will allow you to create target groups for executing the campaigns in SAP CRM
please do reward points if helpful
regards
Dinaker vikas

How to create new rules and using 'From' condition ?

All,
I know, rules are a quota max as 256 ko.
So, my problem is to move all mail from external writer of my directory.
I want to create a folder Inbox\external where all mail have to be move on except internal mail.
So I looked at :
[-From <RecipientIdParameter[]>] ; [-FromAddressContainsWords <MultiValuedProperty>] and [-ExceptIfFrom <RecipientIdParameter[]>] but, because of quota limitation, I could add all internal exchange recipients.
Any idea ?
Thanks

Hi,
If you would like to move the emails from external senders to a specific folder using Inbox rule.
I’d recommend you create a Dynamic Distribution Group and name it as
internalrecipients. Then set it as All recipients in the filter tab. Now it is a group which contains all users and contacts in your organization.
Next, set the Inbox rule in your client as below:
Click on the Inbox folder and new a Rule.
Apply the rules on messages I receive.
Send only to me.
Move to the specified folder (new a folder named external).
Except if from people or public group (internalrecipients).
Run the rule now on message already in “Inbox”
Finish.
See if it works as you expected.
Regards,
Rebecca Tu
TechNet Community Support

Want to load calendar and contacts from Tungsten E to Windows Vista system (32 Bit)

I have an "old" Tungsten E and a new Dell with a 32 bit Vista operating system. Obviously my attempt to load the Palm software from my 5-6 year old disk failed.
I see posts about a ver. 6.2 download, and something about a 4.1 desktop... I'm confused at to how to proceed.
Shall I uninstall the old desktop from my new install on the Vista. It seemed to load OK. Does a new version replace it?
How can I win this battle? And get my contacts to the Palm desktop (or should I send to Outlook 2007?) and my calendar from the Tungsten E to Outlook 2007?
Thanks for any help!
John Lundquist
Post relates to: Tungsten E

Hi.. Welcome to the Palm forums. Obviously the version of palm desktop you are trying to load is not compatible. You need to uninstall what you have already installed then download either 4.1.4e or 4.1.4, both should work fine with vista. Now there are some draw backs that media sync and the installer will not work as your used to. But you will be able to sync your pim items just fine.
Post relates to: Centro (Sprint)

System copy from PRD to QAS based ABAP system EHP4.

Hi guys,
I have to perform homogenous system copy from PRD to QAS.
My PRD is ECC6.0 EHP4 release 701 sp 103( SAP_basis) with oracle ver 10.2.0.4.0.
Is there any specific procedure for EHP4 or i can follow the below mentioned guide.
https://websmp204.sap-ag.de/~sapidb/011000358700000514722009E.pdf.
What pre-requisite i need to take care before doing the system copy?
Regards
Abhishek

Hi,
All pre-requisite is there in system copy guide.Apart from that take user master backup of quality system and after system copy, import the user master data back so that you have same users in quality system.
Also, take RFC's backup also.
Thanks
Sunny

Outlook 2007 Rules and Alerts won't open

User complained of receiving duplicate emails after adjusting rules. I chose to open "Rules and Alerts" from Tools on the tool bar. When opening "Rules and Alerts" a box flashes on the screen and I am unable to view any of the Rules.
I am able to create a new profile and then open the rules. I attempted the outlook /cleanrules command, I was still unable open rules. (It is a Windows 7 OS). Any ideas, if I need to use a new profile what is the best way to move all of the
other outlook info without moving the problem?

I am not sure if this issue is has been resolved but here is the fix. I have been having the same problems for a couple months now until today when I decided to fix it.
When you mentioned OWA that got me thinking because outlook rules are workstation standalone (it will apply if the system and outlook is running) the issue is with OWA. If you have ever modify your rules in OWA you will have the problem.
FIX:
Log onto OWA and go to the options settings.
Go to Rules and try deleting a rule. It should say something like several rules error or something.
LEAVE OWA running and open Outlook.EXE (pretty much just open outlook), preferably, on the computer you set the rules in the first place if you still have it. If not, it is ok.
On your Desktop Outlook, click on Rules and your pop-up should remain up. Delete the olds rules, yes, all of it.
Refresh OWA to make sure all rules have been deleted. If they have, great. If not, repeat the steps again - Log out of OWA, close outlook and open it back up. Now you can create new rules.
OWA Should have no more rules. In the future, make sure you don't make any changes to existing rules in OWA

Hot to migrate mail and settings from Mail 2.1.3 to Mail 3.5??

I'm migrating everything from a mac G4 running 10.4.11 to a Mac Pro running 10.5.6 - address book, calendar etc was find but I am having problems with Mail.
I want to import the emails, email accounts and other settings if possible such as rules and signatures from Mail 2.1.3 on the G4 into Mail 3.5 on the Mac Pro. I've looked through various postings/articles but are not 100% sure on how it is done? I've had a few botched goes but it inevitably ends up with missing folders, missing email etc
Any help would be appreciated.
Thanks
Phil

Thanks for the suggestion Debbi. After my previous message I was looking at the post 'Mail does not quit or show old messages after 10.4-10.5 migration' and tried the solution suggested there as copied below. Glad to say that it worked.
1. Navigate to your Library folder inside your home folder.
2. Locate the Mail folder and drag it to your desktop.
3. Launch the Mail application.
4. Mail will now ask you if you want import your messages. DO NOT HIT CONTINUE YET.
5. Navigate back to your Library folder inside your home folder. Notice there is a NEW mail folder that was created. You cannot delete this folder yet because it is in use by mail so we will just rename this folder Mail2.
6. Drag your OLD mail folder located on your desktop to your Library folder located in your home folder.
7. Go back to the Mail application and click continue. Your messages and settings should import fine now.
8. Verify that your messages and settings imported correctly and quit Mail. Navigate back to your home Library folder located in your home folder and delete the Mail2 folder.
9. Launch the Mail application again and make sure everything functions correctly.

Can't see Update rules and infopackage in the transport connection

Hello, experts!
I need to transport newly created (and activated) update rules and infopackage from Dev to QA environment. When I open transport connection and select infosource, I don't see new update rules and infopackage. There are few update rules for different source systems in this infosource and I can see all of them in the transport connection except for this new one.
Your help is appreciated.
Thanks, Alina.

in Transport connection please select ur higher level Object say Infocube...and collect data flow before then you will ur Update rules and IP

Migration from WD Java to WD ABAP in ESS Trips and Expenses

Hello Experts,
We are migrated ESS Trips and expenses from WD Java to WD ABAP.
Following steps I have performed
1.     Activated FIN_TRAVEL_1 and FIN_TRAVEL_2 business functions.
2.     checked FITV_TRIP_FORM service in SICF /sap/bc/webdynpro/sap its active .
3.     Currently we are SAP ESS 6.0 EHP 4 , and accordingly we have down loaded
uwl_com.sap.pct.erp.mss.tra.14.zip , (for SAP ECC 6.0, Enhancement Package 4) [Note 1076144 - ESS trips and   expenses: Migration from WD Java to WD ABAP]
file as suggested in Migration from WD Java to WD ABAP in ESS Trips and Expenses user guide
4.     after uploading uwl_com.sap.pct.erp.mss.tra.14.zip file in SAP NetWeaver Portal -> System Administration -> System Configuration -> Universal Worklist->& Workflow -> Universal Worklist Administration.-> Object Types and View Definitions -> com.sap.pct.erp.mss.tra.
5.     after uploading file, when manager click up on u201Ccheck trip of ABCu201D workitem in his uwl , he is getting following error.
404   Not Found
SAP J2EE Engine/7.01
The requested resource does not exist.
Details:   Go to main page of this application!
Any idea for fixing this issue.

hi
in the java system , the portal will launch the approval frm the same system , for the abap component , the task type in uwl you might have to define a dynamic property as "System" and give the name of your r/3 system in there.
Try it
Regards
sameer

Connect one JAVA ADS instance to multiple clients from the same ABAP system

Hi,
Does anyone know whether it is possible to connect multplie clients from the same ABAP system to a JAVA instance running ADS?
If so how do you setup the java destinations in Visual Admin and SM59 RFC connections?
Any help is appreciated,
Sander

Dear Sander,
this is always the case if you arrange the ADS connection.
You have to set up the RFC connection 'ADS' in ABAP side and this connection/destination is client independent. So you can use this from all clients of your abap system.
On Java side you have to arrange the already mentioned FP_ICF_DATA_<SID> destination. On the ABAP system and client (you specify in this destination) you have to maintain the user ADS_AGENT and your templates should also exist on this client. If there is no client defined, the default client will be used.
Regards
Istvan

How can I stop my iPhone from synching my contacts and groups lists twice?

How can I stop my iPhone from synching my contacts and groups lists twice....I am using iCloud but am not sure how correct this duplication.

Go into Settings>Mail, Contacts, Calendars. Is this happening at the bottom in the signature section, or in the header of the mail where your email address is? If it is the signature, then go to the Signature area of the Mail settings. If this is in the header, then go to the account in question and edit your account information to include your name instead of Johnny.

Can we call the Human Task operations and the Rule Designer, etc. from outs

Hi,
I just had one of my customers ask me -
Can we call the Human Task operations and the Rule Designer, etc. from outside the SOA Suite ??
Since these are independent applications, and that they are based on Service Oriented Architecture, I should be able to call these services from outside Oracle SOA Suite (SCA) for reuse.
In case you have any idea about the possibilities, could you share some real world examples / URLs please ?
Thanks & Regards

Hi Vaibhav,
Yes, you are right. We are using Oracle SOA suite 11g.
My question is, can these Web Services be directly accessed from, say a .NET application without using BPEL PM, or is using BPEL a must to invoke these services in Human Task operations, Rule Designer, etc ?
Regards

I literally see email disappearing from my account. not in junk or anywhere most recent was an activation email from wordpress. What is going on? i finally had to make a rule that e from wordpress go to inbox and that worked. why is mac stealing my mail?

i literally see email disappearing from my account. not in junk or anywhere most recent was an activation email from wordpress. What is going on? i finally had to make a rule that e from wordpress go to inbox and that worked. why is mac stealing my mail?

i watched this happen several times...i requested an email notification from wordpress over and over to see if i could click on the email in inbox fast enough to open it before it went to never neverland but nada. could not be done. i turned off the junk mail sorter in preferences. even though it was not to be found in junk mail on my mail app or icloud mail or iphone nada...what else is dissappearing?

BACKEND SYNCH of rule and mitigations from CC 5.2 to ABAP system

Similar Messages

Maybe you are looking for