Backflush field is missing in MRP 2 view

Hi
  There is one material, the backflush indicator field is missing in mrp2 view. Can you help me why? Is it because the material
type or something else? Thanks

hi,
Please check it via T-code OMSR to see whether MARC-RGEKZ has been hiden in MM01, MM02 or MM03.
Cheers,
Qiang

Similar Messages

  • Fields are missing in Purchasing View

    Dear Experts,
    We have developed Work flow to create material.The work flow cycle follows like this
    <b>User1-Basic Data1&2,User2-Sales Views,User 3-Purchasing View,User4-MRP Views and User5- Finance and Accounting Views...</b>
    For this we made an option in Basic Data1 view.There is a field called <b>Lab/Office</b>,we customized this field for our purpose.
    1.If we give value as 1, system will trigger user to create a material through work flow.
    2.If we give value as 2,system will come out of work flow,and user can create a material as normal.
    Now we got an issue like this...when user has created a material through work flow,in Purchasing View some fields are missing...<b>Purchasing Group,Plant-sp.matl status,Tax ind. f. material,Qual.f.FreeGoodsDis,Autom.PO</b>....
    While creation of material this Purchasing Group field is appearing at the time of MRP1 and after creation of material,when we go for display material it is showing <b>Purchasing Group,Plant-sp.matl status,Tax ind. f. material,Qual.f.FreeGoodsDis</b> fields.....
    Why it is happening like this???Does this Lab/Office Field has got any affect on work flow???
    Please reply me...
    Regards
    MK

    Dear Ashish,
    We had given authorization to user.
    I would like to ask one more thing,with this particular user we tried to create a material through normal procedure with MM01.Then also in Purchasing View Screen,some fields are missing.
    <b>Purchasing Group,Plant-sp.matl status,Tax ind. f. material,Qual.f.FreeGoodsDis,Autom.PO....</b>...
    We tried to create with other user,then we can see all field Purchasing View....
    So is there any settings on user specific for these fields???
    Please Do Reply me....
    Regards
    MK

  • Backflushing field is missing in material master MRP2

    Dear experts,
    We're are configuring the logistics system for the 1st time.
    The field "Backflushing" is not active in material master, MRP2, although in OMS9 there are no "hidden" indicators for the reference field group 74.
    Could you give any hint, which other relevant settings might be missing in our case?
    Many thanks in advance.

    problem solved.

  • MRP without MRP views

    Hi Experts,
    Is it possible to carry out MRP, without maintaining MRP views and Planning file entries (Manual) for a material?, Please explain!!
    Thanks and Regards,
    Suresh.

    Hi,
    Is it not possible to rum MRP without MRP views extended for the materials.
    For running MRP system requires some key parameters like :
    Procurement Type
    Lot Size
    Rounding Profiles
    Reorder level / point
    MRP Type
    MRP Group
    ..........etc
    As all these fields are available in MRP views only it is not possible to run MRP without extending MRP views for the Materials.
    Hope this will help you.
    Regards
    Rdahk mk

  • Material Group field is Missing in Material Master - Purchasing view ?

    Hai Experts,
                      I want to configure to bring back Material Group field is Missing in Material Master - Purchasing view.  It is mandatory to Create & save a master. I cant save a master in sandbox. Need Help..

    I make all field as Optional & Create master successfully.. Thanks.. I even verfied in J1ID Master for assesable value &  Chapter ID Combination.. But in Cenvat Determination Field,  How i can set Default Indicator for Modvat "tick" & how can i set Excise Intimation Date also.
    I checked Material Master in mm03 [ Display].
    I clicked More & Pre Vals. option in  Foreign Trade Import.
    For More, It shows this error.
    Record 21 MORE  does not exist in table T133E
    Message no. M3748
    For Pre vals., It shows this error.
    Record 21 J1PR  does not exist in table T133E
    Message no. M3748
    Kindly guide me..
    Thanks & Regards
    Swetha

  • SLED field is missing in ECC 6.0

    Hello!!!
    we're upgrading from 4.6C to ECC 6.0.
    I have a problem with SLED field in MIGO transaction in ECC 6.0
    For not batch-managed materials, the SLED check is activated.
    1)In Custimizing, the plant and movement type are actived.
    2) remining self life in Material master plant stock view -> 0 Days
    3)The PO -> 0 Days
    4) Info record -> 0 Days
    WHen we enter the MIGO transaction, in Material tab, the SLED field is missing, so we can't enter de SLED. If I maintain in PO or material, more than 0 Days, the field is open, but It doesn't work with 0 Days...
    In 4.6C version, the SLED filed is open, and It's OK.
    I don't find the solution...any idea???
    Thanks ins advance.
    Best regards
    María.

    Hello,
    thank you so much.
    I think that there is not soultion. SAP told me:
    Dear Maria ,
    You have set the Maximum period, Minimum remaining shelf life and
    Total shelf life as zero. I tested this on our internal test system
    and when these are all set to zero the fields PROD & SLED are not
    visisble in the Material tab in tcode MIGO.
    The shelf life is only checked when you enter a goods receipt if the
    following prerequisites are met :-
    1.The minimum remaining shelf life is maintained in the material master
    record or in the purchase order. The minimum remaining shelf life is theminimum number of days for which the material must keep for the goods
    receipt to be accepted by the system.
    2.The shelf life expiration date check is active for the plant and
    movement type in Customizing for Inventory Management.In the
    transaction SPRO,if you check in SAP Reference IMG
    Material Management > Inventory management and Physical Inventory
    > Goods Receipt > Set Expiration date Check,the SLExp/prDt field
    is checked for plant and material movement
    Regards

  • MRP view in material master creation

    Hi Guys,
    Can anyone tell me how to change the settings for field dependency. My requirement is to use only the filed for "reorder point" in MRP view and do not enter any other data like MRP type or lot sizing etc.
    I have tried changing the setting for field selection group for MRP type etc but whenever i enter the value in Reorder point field it asks me for MRP type and does not allow me proceed...
    Thank you for your help.
    Regards,
    Siddharth

    Hi
    You cannot change that dependency as it is done through program code and not thru config.
    If you want reorder point only as an info field and not for actual Reorder point planning, I suggest you to explore any other unused information field in the masterial master.
    You can also use classification
    Best regards
    Ramki

  • MRP view maintenance

    Hi All,
    I have developed a programme to uplaod MRP views for huge number of materials across Plants.
    There are few material for which one strange thing is observed
    1. Material A plant 1-MSTA -D not mantained, but the same is there in MM01
    2..MaterialA plant 2-MSTA-D maintained and its maintained in MM01.
    Is MRP maintained on the basis of Plant or Storage location or both...because my programme is looking at material plant combination level and uploading the MRP as per maintenance status maintained in table MSTA.
    But in above case, it gave an error probably  because for one storage location MRP was maintained  and for other not...
    Can you all throw some light on this....
    Regards,
    Satyendra

    One thing i missed...there are few plants for which above things are appearing for all the materials...
    i.e MRP view maintained in MM03 but for the same materials MSTA doesnt have D status for those plants..
    Regards,
    Shailesh

  • New lot size in MRP view

    Hi ALL
    Any one can suggest how can we configure a new lot size for  MRP view in ECC.
    regards
    Vikas

    Hello Vikas,
    I am not too sure ? Can you not change the field ? It doesnot need any cofiguration on the MRP view level. The value needs to be set
    Thanks
    Amber

  • How to create MRP view using BO BUS1001006 & Method CreateViews.

    Guys,
    I need to create MRP view using BO BUS1001006 & Method CreateViews.
    i am not able to unterstand, what i need to specify to create MRP view, other than material number.
    what field i need to send for MRP view.
    Regards.
    santosh.
    Edited by: santosh koraddi on Jun 23, 2010 6:14 PM

    Hi,
    I have a similar question, have done a search and I see this sort of thing has come up a few times but with no definitive answer.... this thread seems close but don't really understand the solution (I'm not an ABAPER)
    I have a material master creation workflow under construction, it uses BUS1001006 and method createviews.
    The issues is that I want to restrict creation of certain views to certain agents, I have a fork in my workflow and its meant to split up the various views for various agents.
    The problem is that if an agent in one of the forks completes their views the workflow tries to get them to completes teh other views which they do not have authoisation to do... anyway the end result is that the workflow thinks all teh views have been created and the workflow items dissappear from the others inboxes.
    How do I setup my workflow such that each agent in each fork only has to complete the views they have authorisation to maintain and leaves work items in the inboxes of other agents for them to complete?

  • MRP view in MM60 list

    Dear pandits,
    I am doing material plant extn. thro lsmw from plant x to plant y.
    Could I fetch following MRP views aprat from  MRP type (appearing already .)
    reorder point,  MINBE
    mrp controller, DISPO
    lot size , DISLS
    maximum stock level MABST
    thanks
    v balajee

    Hi ,
    I think u will not all these fields in MM60 report.
    All these fields u will get in MARC TABLE,go to se16.give MARC table.In the initial screen,go to settings list format- chosse fields-select all the fileds which u want and enter.
    Then in the initial screen,give plant X and execute.
    U can download all these details to excel sheet and can be used for lsmw.

  • Seasons in MRP view

    Hi,
    My customer wants to view MRP in seasons wise. Is that possible in MRP screen?
    Please let me know if any method available in MRP..
    Thanks,
    Rohith

    Hello Vikas,
    I am not too sure ? Can you not change the field ? It doesnot need any cofiguration on the MRP view level. The value needs to be set
    Thanks
    Amber

  • Materail Master - MRP view 4

    Dear experts,
    pls explain MRP view 4 - Follow-up matl field?
    what use? how to use?
    Regards,
    Sankaran

    Hi,
         A particular material X to be discontinued. Instead of that you want to use some other material Y. For that reason this field will use.
        In MRP 4 view of material X , make discontinued indicator tick. Give effective date.
    Give the follow up material no.Y.
    Result: From effective date, material X will be replaced by material Y.
    Reward if useful.
    Regards,
    Dharma

  • Finding if mrp view exists

    hi
    i am working on an enhancement within cif to transfer material master in ecc to scm .
    i need to check if mrp view exists or no for every material transferred.
    now how do i do this coding wise ?  which field or table do i need to check if mrp view has been defined or no.

    Hi,
    Use FM 'SELECTION_VIEWS_FIND'
    Check below thread
    Select a specific view in MM02/MM01
    https://forums.sdn.sap.com/click.jspa?searchID=6788689&messageID=4407517
    Regards,
    Atish
    Message was edited by:
            Atish Sarda

  • MM02 - MRP view - III

    Hi,
    I am  changing some of the fields in MRP view of MM02 transaction using a BDC program, while doing recording, the MRP view is of VIEW number 06 in the list of views.
    perform bdc_dynpro      using 'SAPLMGMM' '0070'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MSICHTAUSW-DYTXT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SCHL'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(06)'
                                  'X'.
    But for some materials this  'MSICHTAUSW-KZSEL(06)', is going to some other views instead of MRP view.
    In any way, can we define the MRP view name instead of giving the view number as 06.
    Thanks in advance,
    KC

    Hi,
    Please check this sample code on how to find views number in MM02.
    TABLES : t130m,
                   t134.
    DATA: kstatus LIKE t130m-pstat,
    hstatus LIKE t130m-pstat,
    tkstatus LIKE t130m-pstat,
    bildsequenz LIKE t133k-bilds,
    berecht_akt(2) TYPE c.
    DATA: BEGIN OF ztab_new OCCURS 30.
    INCLUDE STRUCTURE mbildtab.
    DATA: END OF ztab_new.
    CLEAR t134.
    SELECT SINGLE * FROM t134 WHERE mtart = <mtart>.
    CALL FUNCTION 'MATERIAL_INIT'
    EXPORTING
    tcode = 'MM01' or MM02
    kz_berprf = 'X'
    IMPORTING
    it130m = t130m
    tkstatus = tkstatus
    EXCEPTIONS
    no_authority = 1
    wrong_call = 2
    kstatus_empty = 3
    tkstatus_empty = 4
    aktyp_tcode_mismatch = 5
    tcode_not_found = 6
    material_article_mismatch = 7
    OTHERS = 8.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    CALL FUNCTION 'BILDSEQUENZ_IDENTIFY'
    EXPORTING
    materialart = 'HALB' "Material Type
    tcode_ref = t130m-trref
    IMPORTING
    bildsequenz = bildsequenz.
    CALL FUNCTION 'SELECTION_VIEWS_FIND'
    EXPORTING
    bildsequenz = bildsequenz
    pflegestatus = t134-pstat "tkstatus
    TABLES
    bildtab = gt_bild
    EXCEPTIONS
    call_wrong = 1
    empty_selection = 2
    OTHERS = 3.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    http://sap4.com/contentid-110.html
    Also you can check  view VCM_T133A or tables T133A and T133B.
    Regards,
    Ferry Lianto

Maybe you are looking for