Backflush Semifinished product and stock post to quality inspection stock

Dear Experts,
Please advise is it possible for the below in SAP. How to do?
When backflush "Semifinished product", system automatically post to quality inspection stock. Then it is skip for 9 lots. The 11th lot again post to quality inspection stock.
1st backflush posting -> post to quality inspection stock
2nd until 10th backflush posting -> post to unrestricted stock (skip)
11th backflush posting -> post to quality inspection stock
Thanks.
Regards,
Wong

Dear Experts,
Let me further explain what I want.
Production people produce semifinished product, but quality inspection people not inspect all the product. For example they will inspect 1st and 11th batch of product only.
So I propose when backflush the semifinished product, system post the stock to quality inspection stock. Then production people know this batch of product need to be inspected and pass to quality inspection people. Once quality inspection people complete the inspection, they will release the material (UD) to unrestricted stock.
I have no idea on how to configure and maybe it is not possible in SAP. Please advise.
Question: Is it we should manually create inspection lot for each transaction (eg. backflush or material movement)?
Thanks in advance.
Regards,
Wong

Similar Messages

Problem in BAPI for stock posting from quality inspection to unrestricted usage

Hi all,
I am using BAPI_GOODSMVT_CREATE for stock posting from quality inspection to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
GOODSMVT_HEADER:
PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
GOODSMVT_CODE:
GM_CODE: ‘04’ .
GOODSMVT_ITEM:
MATERIAL = MATERIAL NO
PLANT = PLANTCODE
STGE_LOC = ‘WIP’
BATCH = BATCHNO
MOVE_TYPE = ‘321’
ENTRY_QNT = 100
ENTRY_UOM = ‘EA’
ORDERID = Prd ord no.
After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
Kindly help me.

Hi Naveen,
Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

Purchase order GR need to post to Quality inspection stock

Hi all,
How to post stock to Quality inspection directly for a PO. Even though in GR i make sure that its posting in Quality inspection, by default it is going to Urestricted stock. How to fix this by posting stock to Quality inspection directly?
Thanks,
Avani.

Hi Avani,
Pre-requesite:-
QM should be live at plant level.
Data toeb maintained in QM view.
You need to activate inspection type 01 (For GR against Purchase Order) and 04 (For GR from Production, against Process Order) in QM view of Material Master. Doing this all the GR quantity will be posted in Quality stock automatically.
If QM is not live, you need to activate the "Post to insp. Stock" inidicator in Materail master QM view.
Update us to help you more, reward points to help you better!!!
Regards,
Shyamal

Return posting to quality inspection stock

Hi QM Gurus!
How can i post from unrestricted to quality insp stock? I am trying to use movement type 322(quality insp to unrestricted-reversal) and an error message says "Change the inspection stock of material 1101 in QM only".
When i activated the inspection type 08 (stock transfer inspection), the movement type 322 works. However, when i do transfer posting from one storage location to another, an inspection lot is created.
So my problem is, how do i allow posting from unrestricted to quality insp stock and no inspection lots are created when i transfer the material from one storage location to another???
I would appreciate if anyone could help me.
Regards,
Heinrick Palad

hi heinrick
you can reverse the stock positing providing following prerequisite have been meet,
A usage decision has been made for the inspection lot.
The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting.
Reversing Stock Postings
Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
In the field for the purchase order, enter the purchase order number for the original goods receipt.
You can copy the purchase order number from the inspection lot.
Choose Enter to display the selection screen for the purchase order items.
Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
Save the goods receipt and exit the Materials Management component.
Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.
regards
thyagarajan

Stock posting from quality inspection to Unrestricted

Hi ,
User has approved the 1980 qty out of 2160 qty for a inspection lot in the transaction QA11 , now the 180 qty remains in quality inspection . plesase advise how can we move the 180 qty from QI to unrestricted stock.
Regards,
Amara

Hi,
Does the inspection lot has been created for the entire qty and only 1980 qty has been moved to unrestricted by QA decission?
If the lot still exists for remaining qty, do the same thing for the remaining qty and if not with a new lot.
Regards,

Quality inspection stock

Hi experts ,
Whenever a material is procured from a particular vendor then at the time of posting goods receipt that material by default to be posted in Quality inspection stock alone not in Unrestricted use stock,i.e. posting in unrestricted use stock should not be allowed at all . If the vendor going to differ means then it can be posted in Unrestricted us stock .
Kindly help me how to do this.
- Neo

Hello Neo,
There are two options in this case,
1. If using QM module, then as suggested by Srinivas, you need to maintain QM info record for the vendor which are subject to Quality material.
2. If you are no using QM module then you need to flag mark "Post to Inspection Stock" check box in purchasing view of material master. But in this case, the material will be posted as QI stock for all the vendor, however you can change it during PO and GR.
Hope this helps.
Regards
Arif Mansuri

Automatic batch determination for quality inspection stock

Hello, gurus.
Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check CH and Checking Rule for Availability Check 03 where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
Why it is not possible to do automatic batch determination for quality inspection stock then?

OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.

Sample still showing in quality inspection stock after usage decision completed

After process order completed, we have received 100 units as a quality inspection stock. After usage decision,( QA11), I have posted 98 units to unrestricted use and 2 units to the to sample usage
98 units successfully move to unrestricted stock.
However 2 units for sample still showing quality inspection stock.
I have checked MB51, mat document number for sample is 4900000160 and movement type is 331
Do you have any idea why sample still showing in quality inspection stock. It should consumed and zero out the quality inspection stock in MMBE

Hi,
Please check you MIC's control Indicators.
Is it tick on Destructive insp. under Sample tab ?
Please tick it and try again with whole process.
Destructive Insp. : You specify whether the sample is to be destroyed after inspection. This means that is no longer available. This quantity is used in the usage decision as the proposed quantity for the posting to sample.

Occasional quality inspection stock in production order

Hi experts,
I have QM activated to material with 03 and 04 control type but, in 04 control type I didnu2019t select u201CPost to Inspection Stocku201D because normally production stock go to unrestricted stock. But, in some productions I need that stock go to u201CInspection Stocku201D. How can I do to doing this in some productions orders?
Thanks
J.N.

Thanks by your answer
Whats happen is that in some production versions we need that production stock entry to quality inspection. Before activate QM to this material in my production order I can change Control stock type (in Goods Receipt tab) to "Quality Inspection". Now systems give me an error message when I change this field.
Other option is in MIGO (Good Receipt > Order) change stock type to "2-Quality Inspection" but when I save the document system change this option to "Unrestricted use".
Can anybody help me?

Stock Type X Quality Inspection in Production Orders

Hello,
I have the material 123EDFXXX that the Production order has set the Stock Type =X (Quality Inspection)...
We don´t know how was that set!! since that material has not active the QM Views in the material master.
There is another master data (prod version, route) or something else that is coping that value??

Hi Marco,
1.Pl check if QM was active before the creation of order.If so you need to delete all Material and accounting documents
2. Check in the work scheduling view in material master if the inspection stock is active box is active.then this could be the reason.
Regards
George

Storage location extension for Blocked and Quality inspection stocks

Hi All,
Could any one explain how to extend a Storage location (which is actually maintained for the Returns) to make use for the Blocked and Quality inspection stocks. Does this require any config settings.
Thanks in advance.
Kalyan

Hi,
Thanks for the Reply.
Let me be more clear,in describing my requirement. Actually the present Storage location is maintained for only Returns. But in addition to this I require to make use of this storage location for the purpose of the maintianing Blocked Stock or QI stock.
Therfore to achieve above what are necessary steps or do i need to maintain any config settings for this.
Thank You,
Kalyan.

System shud restrict stock posting of 04 inspection lot

Dear ALL,
Pain Area - whenevr Process order get release 03 inporcess inspection lot generates and after Process order get confrimed
O4 inspection lot generates , Evry time we use to process 04 Inpsection lot and then stock posted from Quality to Unrestrcted and finally , urestricted stock goes to market . NOw 03 inpsection lot remains in Created status , system not restriced for 04 activity i.e stock posting . So I want to restrict stock posting of 04 inspection lot if 03 inpsection lot doesnt have UD status .
please suggest .
Regards,
Prerna Verma

Do you want to put a hard error when UD is taken for O4 lots, if the corresponsding SF lot is not released? This will stop users releasing the 04 lots and personally I am not in favor of writing a piece of code in User exit at UD and stiop the release of a Finished Batch.
I have worked on similar requirement where users used to check manually the SF batch - UD prior to release a Finished Lot. to reduce the manual work and data transpose errors, we have used a calculated char. SF batch released? and assigned it in the finished product inspection paln.
We copied the standard FM - QEFC_FORMULA_CALC_EXAMPLE and written a logic to look the consumed SF batch is released or not .The Function Module is assigned to a Calculated Characteristic u2013 the user will then be able to Calculate the characteristic during Results Recording of a batch of Finished Product to determine the Release Status of the issued batch of Semi-Finished material, as opposed to having to look it up manually. We looked at the Q-score to decide a SF batch is released , rejected or UD not taken. The Function Module used the name of the Master Inspection Characteristic (MIC) and the Material Type of the Inspection Lot to determine the Inspection Lot Q-Score to return.
With this set up you will not issue a hard error at the time of UD for Finsihed batch at the same time users will know the SF batch status when the results were recorded for Finished batch.
If your requirement is a Hard error, simply go for the user exit suggested and write a logic to look for the Semi Finished Batch consumed.
Hope it helps.
Thanks,
Ram

Sto stock to Quality Inspection stock

Hi,
I want Sto stock to Quality Inspection stock.Then i want Quality Inspection stock to production purpes
I want return stock to Quality Inspection stock.then Quality Inspection stock to normal stock

HI,
For the material to go into quality stk,in the puchasing view of material master for the receiving plant tick the post to inspection stk & save.
Then do the STO the material will come automatically into quality stk.
Even if u dont tick in material master still u can receive the matl in QI stk when doing migo by selcting the QI stk.
After receiving the matl u can move it by using tcode MB1B & mvmt type321 to Unrestricted use.
IN SAP only the unrestricted can be issued to production.
Edited by: Murugan mgl on Aug 13, 2009 8:15 AM
Edited by: Murugan mgl on Aug 13, 2009 8:16 AM

Quality inspection stock payment block

Hi All,
I want to block the payment for the materials which comes to quality inspection stock in MIGO as I have maintained in Material Master purchasing view post to quality inspection tick.
I want payment to the vendor only after the stock goes from quality to unrestricted use .Is there any way achieving it ?
Regards
Abhijit Das

Dear,
Please try this in transaction OQB1 and Change the QM control key used in the QM view for the material.
Or use SPRO > Quality Management > QM in Logistics > QM in procurement > Define Control key path.
In the details of the key, set the Invoice Block indicator as well as whether it should be a warning message or an error message.
Regards,
Syed Hussain.

OMJJ - Where I diferentiate "Stock quality inspection" - "Stock unrestricted use"?

Good morning, experts!
I need to know how to set up a move for the input material in quality stock, without having to use the QM or configure the material. We have the standard movement 503 that is received at the stock in quality inspection and the movement 501 that the entry into stock unrestricted use. In what field of transaction OMJJ I make this differentiation?
I appreciate your help.

Hi,
If one you use 501 the stock is sent to Quality inspection, then this could happen because you have checked the Post to Insp. stock indicator in the material master (Purchasinf view).
Post to Inspection Stock
Specifies whether the material is subject to quality inspection (without inspection lot processing) and whether a goods receipt is posted to inspection stock. The indicator is copied to purchase order items and goods receipt items as a default value.
Dependencies
You can select this indicator, if no stock-relevant inspection type has been selected in the inspection setup, and therefore no stock-relevant inspection lots can be created.
If you activate a stock-relevant inspection type, the entry in this field is deselected and can no longer be maintained. In this case, a corresponding indicator in the inspection type controls whether goods are posted to inspection stock.
When you use 501 the stock should be posted as unrestricted stock, then you can move the stock from Unrestrected to Quality Inspection stock using movement type 322 (use t-code MB1B).
With movement type 321 you can move from Quality Inspection stock to Unrestricted.
Kind Regards,
Mariano

Backflush Semifinished product and stock post to quality inspection stock

Similar Messages

Maybe you are looking for