Backflush while trying to complete a wip transaction

hi
backflush while trying to complete a wip transaction
i am giving an example
to make 100 ( finished product).
i use
10 item
30 item
50 item
i have defined the items in bills of material . All the three items have onhand quantity .
after creating a discrete job in work in progress i am trying to complete the transaction. while trying to complete the transaction i see one item , say in our example item number 30 is getting back flush with the item becoming red in colour and once i give the reason for back flush it gets completed.
question
what is back flush?
when does a back flush occur? and where to check .
Regards
Sudharshan

There are two types of backflush. They are actually called Pulls...one is an Operation Pull and one is an Assembly Pull. If you have a routing on your work order with multiple steps you can actually operation pull (backflush) the components from inventory and into WIP when a specific operation is completed. You designate this in your Bom and Routing. With an assembly pull (backflush) when the job is completed the components are relieved from inventory and "pulled" into WIP.
You can use the default WIP Supply Type in the org item as a default or set this up specifically in individual BOM's and Routings.

Similar Messages

  • Error while trying to complete a maintenance cycle

    Hi,
    I created a maintenance cycle and had some requests created underneath it, some of them gone into production and some of them till QA and one in Dev stage. Created another project along with created another maintenance cycle. Have some requests on that.
    Now when i try to close the first cycle it showed all the requests completed and the one still in the cycle (testing stage, dev stage) and also it gave a message like if you complete now it will not be reused in this cycle but when next cycle for that project is created it will be transferred there. I went ahead and tried to complete (close) the cycle, but it is not doing it. The following is what the error showing:
    CTS projects for Solman project ZMAINT_1 could not be releaed
    CTS project DR1_P0004 in system DR1 client 130 could not be released
    Status is showing as Being Completed and it is not allowing to create new cycle since the previous is not completed properly.
    Any idea like anything particularly to be done for those CTS project in development system.
    Thanks,
    Murali.

    Hi Ruben,
      Thanks for the reply and it worked after releasing the modifiable requests under that cycle. But when i created another cycle under that project it transferred all the urgent correction transports (some of them went to production, some of them not) from the previous closed one but it is not showing any normal correction related transport requests, what happened to those normally when you close a cycle ?
    Thanks,
    Murali.

  • My Android Galaxy S5 has locked up and gone into endless loading while trying to update to the Kitkat update. I have set it back to factory settings and tried again and it has locked up again. My phone no longer works. What else can I do?

    My Android Galaxy S5 has locked up and gone into endless loading while trying to update to the Kitkat update. I have set it back to factory settings and tried again and it has locked up again. My phone no longer works. What else can I do?

        Oh goodness,SLEEPER888. We wish you didn't have this problem while trying to complete this update.You have done quite a bit of troubleshooting on your own. If the phone update does not take, we would need to replace it with the warranty. Is it still locked up?
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • I receive this error while trying to update to iTunes 10.6.3

    I receive this error while trying to complete an Itunes 10.6.3 update.
    "The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."
    I have tried installing again many times with the same result.  If someone and tell me how to proceed, this would be great!!  Thanks, Kim

    I'd try updating using a .dmg installer downloaded from the Apple Website:
    http://www.apple.com/itunes/download/

  • My InDesign CS4 keeps crashing while trying to package and/or export. Please help?

    I've been trying over and over to either package or export my file, but I just see the little busy wheel and then it crashes. I haven't noticed it crashing while trying to complete any other function, just those two. Any ideas on how I can fix this? Need it fixed ASAP.
    Thanks!

    check these links:
    Troubleshooting 101
    http://forums.adobe.com/thread/526990http://
    Restoring Corrupted Indesign Document
    http://forums.adobe.com/thread/1153351?tstart=120
    Also delete Indesign Recovery files ( searsh for indesign recovery folder)

  • While trying to change a BOM with transaction CS02, a runtime error appears

    While trying to change a BOM with transaction CS02, a runtime error appears.
    In intial screen he entered material ,plant BOM usage and date valid from  after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
    Developer trace
    ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
    Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
    Error Code SAPSQL_ARRAY_INSERT_DUPREC.
    Module  $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
    Function HandleRsqlErrors Line 775.
    RABAX: level LEV_RX_STDERR completed.
    RABAX: level LEV_RX_RFC_ERROR entered.
    RABAX: level LEV_RX_RFC_ERROR completed.
    RABAX: level LEV_RX_RFC_CLOSE entered.
    RABAX: level LEV_RX_RFC_CLOSE completed.
    RABAX: level LEV_RX_IMC_ERROR entered.
    RABAX: level LEV_RX_IMC_ERROR completed.
    RABAX: level LEV_RX_DATASET_CLOSE entered.
    RABAX: level LEV_RX_DATASET_CLOSE completed.
    RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    RABAX: level LEV_RX_ERROR_SAVE entered.
    RABAX: level LEV_RX_ERROR_SAVE completed.
    RABAX: level LEV_RX_ERROR_TPDA entered.
    RABAX: level LEV_RX_ERROR_TPDA completed.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    RABAX: level LEV_RX_END entered.
    RABAX: level LEV_RX_END completed.
    RABAX: end RX_RFC
    In sm21
    Perform rollback
    Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
         Short dump "090618 110101 donalda 11557 " generated
    Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
    Exception              CX_SY_OPEN_SQL_DB
           Occurred on     18.06.2009 at   11:01:01
    The ABAP/4 Open SQL array insert results in duplicate database records.
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
    one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "RKE_WRITE_CE4__BPS1" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
    How to correct the error
    The exception must either be prevented, caught within the procedure
    "RKE_WRITE_CE4__BPS1"
    "(FUNCTION)", or declared in the procedure's RAISING clause.
    To prevent the exception, note the following:
    Use an ABAP/4 Open SQL array insert only if you are sure that none of
    the records passed already exists in the database.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
    "SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
    "RKE_WRITE_CE4__BPS1"
    If you cannot solve the problem yourself, please send the
    following documents to SAP:
    1. A hard copy print describing the problem.
       To obtain this, select the "Print" function on the current screen.
    2. A suitable hardcopy prinout of the system log.
       To obtain this, call the system log with Transaction SM21
       and select the "Print" function to print out the relevant
       part.
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, you can either use the "PRINT" command in the editor or
       print the programs using the report RSINCL00.
    4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.

    Hi ,
    you are getting beacuse u are trying to do mass update to database.
    Please check that below note are applicable to your system.
    Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
    Note 869534 - AFS MRP doesn't work properly with all BOM item categories
    Thanks Rishi Abrol

  • Error while trying to retrieve the task: EventId(complete) does not belong

    Hi Experts,
    I have created a process composer DC in which i have created a process with two human tasks.
    Each tasks is binded with web dynpro Iviews (means followed all the steps neccesary).
    I deploed the DC successfully. now i started the process and got a task in my UWL but on click of the task i got the below error.
    Error while trying to retrieve the task: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
    [EXCEPTION]
    java.lang.IllegalArgumentException: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
    I have rechecked the event that i have created in the component controller and Interface controller.
    Can you please help me in debunging the error.
    thanks
    Narendra

    Hi,
    sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
    My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
    Best Regards
    Andreas

  • Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Go to "control panel" then "add or remove programs".  Highlight "Apple software update"  Choose "change" click "Repair"  This should do the trick.  Then download and install iTunes 10.5 again.

  • Getting the error "Error while trying to update record" when I try to force complete a plan in DAC

    Hello Everyone ,
    I am using OBIA 7.9.3.7 . One of my execution plan has finished executing all the tasks but it is still in running mode . When I try to force complete it , it gives the error " Error while trying to update record" . Upon checking the log file , I found the below errors :
    MESSAGE:::ORA-04092: cannot COMMIT in a trigger
    ORA-06512: at "DAC_CUSTSCM.ETL_FAIL_NOTOFICATION", line 9
    ORA-04088: error during execution of trigger 'DAC_CUSTSCM.ETL_FAIL_NOTOFICATION'
    EXCEPTION CLASS::: java.sql.SQLSyntaxErrorException
    The Plan is in running state for past couple of days . I tried to re-start the DAC services , but again it gave the same error . Kindly suggest .
    Regards
    Satyendra

    Just to correct , the version of obia is 7.9.6.3

  • HT5149 final cut pro error- "operation couldn't  be completed" while trying to burn a dvd

    Final cut pro error " operation couldnt be completed" while trying to burn a dvd

    Nothing besides "operation couldn't be completed?" No error message?

  • My ipad 2 disconnects while trying to update and cant complete syncing / copying of apps.

    Recently My ipad 2 has not been able to get a full charge and after repeat attempts manages a 95% charge. i updated to iOS 8.1.3. and my ipad disconnects while trying to update and cant complete syncing / copying of apps. it just keeps rebooting itself!

    Howdy frakie,
    If you are having an issue with your iPad restarting itself, I would suggest that you troubleshoot using the steps in this article - 
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    In particular, since you are already using the latest version of the operating system -
    If you still see this issue after updating, contact Apple Support.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW:  The operation couldn't be completed. (OSStatus error -61.)

    HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW:  The operation couldn’t be completed. (OSStatus error -61.)

    Hello,
    I believe the issue was the external HD I purchased was not formatted for Mac . . . once I took care of that - all went well!  The slide show transferred and the surprise 70th birthday party was a huge sucess.  Thank you everyone!

  • While trying to download iTunes to a Windows 7 PC I got the following error message:  a program reqjuired for this install to complete could not be run.  Any suggestions.

    While trying to download the 64 bit version of iTunes for a Windows 7 PC, I got the following error message:  A program required for this install to complete could not be run.  Any suggestions?

    I would try removing and reinstall the Apple software using:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Update was terminated error while trying to attach output type to VA22

    Hi
    We are getting the below message while trying to attach output type to quotation in VA22 transaction
    Can you tell us what exactly the problem is?
    It doesn't happen with other output types...
    Update was terminated
    System ID....   PEQ
    Client.......   300
    User.....   Swetha
    Transaction..   VA21
    Update key...   1CB83C9AAEF946C8A1CDE4E19BC94479
    Generated....   19.05.2008, 08:22:54
    Completed....   19.05.2008, 08:23:41
    Error Info...   Application area: /SMB40/SSFCOMPOSER  , message no.: 002, no entry found in T100
    Regards
    Sudha

    Hi ,
    Please check the message in the table - T100 using transaction se11. You might get the answer.
    Thanks
    vamshi

  • TS1424 While trying to make a purchase from app store "contact iTunes support" flagged up and download ceased. What do I do now.

    While trying to purchase an app from the app store "contact iTunes support to complete transaction" flagged up. What can I do to correct problem?

    You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
    Regards.

Maybe you are looking for