Backflushing field is missing in material master MRP2

Dear experts,
We're are configuring the logistics system for the 1st time.
The field "Backflushing" is not active in material master, MRP2, although in OMS9 there are no "hidden" indicators for the reference field group 74.
Could you give any hint, which other relevant settings might be missing in our case?
Many thanks in advance.

problem solved.

Similar Messages

  • Material Group field is Missing in Material Master - Purchasing view ?

    Hai Experts,
                      I want to configure to bring back Material Group field is Missing in Material Master - Purchasing view.  It is mandatory to Create & save a master. I cant save a master in sandbox. Need Help..

    I make all field as Optional & Create master successfully.. Thanks.. I even verfied in J1ID Master for assesable value &  Chapter ID Combination.. But in Cenvat Determination Field,  How i can set Default Indicator for Modvat "tick" & how can i set Excise Intimation Date also.
    I checked Material Master in mm03 [ Display].
    I clicked More & Pre Vals. option in  Foreign Trade Import.
    For More, It shows this error.
    Record 21 MORE  does not exist in table T133E
    Message no. M3748
    For Pre vals., It shows this error.
    Record 21 J1PR  does not exist in table T133E
    Message no. M3748
    Kindly guide me..
    Thanks & Regards
    Swetha

  • What are the mandatory fields while creation of material master in differen

    what are the mandatory fields while creation of material master in different views?

    Hi Gopi,
      This is purely depends on the function configuration, which would be done MM consultants.  Kindly check with them.
    thanks & regards
    Kishore Kumar Maram

  • Backflush field is missing in MRP 2 view

    Hi
      There is one material, the backflush indicator field is missing in mrp2 view. Can you help me why? Is it because the material
    type or something else? Thanks

    hi,
    Please check it via T-code OMSR to see whether MARC-RGEKZ has been hiden in MM01, MM02 or MM03.
    Cheers,
    Qiang

  • Standard  Radio Button Tabs missing in Material Master

    Dear Experets,
    We have Upgraded from 4.5 to Ecc 6.0. We are finding an issue in Material Master.
    When we create a material with the required selected Views and maintaing the datas like Basic Data and other Views, we usually have standard Radio button Tab to shift over from one View to another View. I am not able to find those Views either in Creation of Material Master, Or Change or Display ?
    Can any one suggest on this? Is there any Patch is missing or any configuration setting has to be carried out ?
    Please Suggest your valuable inputs.
    Best Regards
    Javeed
    Edited by: JAVEED AHAMED on Apr 29, 2010 10:40 AM

    Hi,
    Check sap note 107404.
    Regards
    Ankur

  • Field is hide in Material master

    In Material master Field Manufacturer Part No. MARA-MFRPN is hide. I have cheked the Field references in Material type, Industry sector & Plant. All settings are optional. But why this field is not appearing. Is there any other setting for hiding fields? If any one knows please help me.

    Dear!
      After you have made sure that u completely checked fields in IMG > LOGISTIC GENERAL > MATERIAL MASTER > FIELD SELECTION > MAINTAIN FIELD SELECTION FOR DATA SCREENS there may be another reason for that.
    Check whether any transaction variant has been set for mm01 (material master). Check T.Code SHDO for this.
    Reward if useful.
    yuvi.

  • How to Hide fields at Costing2 in Material Master

    Dear Experts,
    One of my requirement is, i want to hide 3 fields in Material Master costing2 tab. The fields are Planned Price1, Planned Price2, Planned Price3.
    Can any one guide me how to hide those fields through SPRO. Otherwise how to approch this requirement?
    Thanx and Regards,
    Mohana

    Hi,
    My requirement is, Customer dont want Planned price1, planned price2 and planned price3 in costing tab2 in Material Master. They required this 3 fields with 7 more fields in one more tab.
    So our Tech consultants are created one more view next to costing tab2. They made the remaining 7 fields into 'Z' table and these 3 fields i need to move from Costing tab2 to costing tab3.
    Kindly help how we need to achive this.
    Mohana

  • MRP area- settings are missing in material master

    Dear All,
           I am working on MRP area. As I was going through the SAP library, it was given that the some settings are need to be done in MRP 4 view for the perticular storage locations. But I am unable to find those settings in material masters, without which I can't proceed further. Kindly guide me. I am using ECC 6.0.
          Dear Rupesh Brahmankar, heartiest congratulations for achieving the milestone. Keep up the good work.
    Regards
    SmanS

    Dear SAP Consultant,
    Pls check whether MRP is activated for your material master thru Tcode OMS2.
    This can be activated by selecting MRP under user departments in detail screen of material type in Tcode OMS2.
    Regards,
    Abhee.

  • Tax code missing in material master

    Hi Gurus,
    When I try to create a outbound delivery system displays message u201CMaterial not defined for sales from Indiau201D, the long text of message says that tax codes are not maintained in material master.
    But in material master sales view I am unable to maintain values (no values in possible entries option F4).
    Please advice.
    Regards,
    Prasad svs

    you have an entry there for India in your sales org data of Material master, but this entry is without tax code, correct?
    Or don't you even have a line for India there?
    In case 1) create the tax classfication in IMG > SD > basic data > taxes > tax relevance of master data
    If case 2) allocate the sales organisation to you India plant in IMg > Enterprise structure > Allocation > Sales org to plant

  • Future standards missing from material master

    Hi All,
    I have an issue with ckr1 t/r.
    when i run ckr1 t\r in test run and in future standards cost estimate mode by giving i/ps for comany code plant and material.
    when i look into mm03 t\r, i am getting zero's in future standards.
    As per my analysis the future data might be deleted. if itz correct ( future standards data deletion)  how can i know the data was deleted and when it was deleted. if data was not deleted then what will be the reason to getting zeros in future standards.
    Thanks & Regards
    Krishna

    It's all about the table KEKO.
    these are the Key fields
    Reference Object  - don't know this field, it is always "0" when I look
    Cost Estimate Number - Product Costing  - system assigned number
    Costing Type  -  01 for product costing (18 for Sales order costing
    Costing Date (Key) 
    Costing Version
    Valuation Variant in Costing
    Costs Entered Manually in Additive or Automatic Cost Est.
    Notice that STATUS is not part of the key combination
    Status KA = costed without error
    Status VO = marked without error - this will show in the Future Cost estimate fileld of Costing 2
    Status FR = released without error and is is the current cost estimate filed of Costing 2 - it is also the standard price
    If a cost estimate for material 1234 is created (CK11n) with no errors for:
    Nov 1 2010
    version 1
    valuation variant Z01
    and saved KEKO shows the status KA for this key combination (serveral more tables are involved that hold the values, but KEKO is the key)
    When this cost estimate MARKED without error to be the NEXT standard cost (CK24) the status in KEKO becomes VO
    and you will see it as the FUTURE cost estimate on Costing 2 (This VO status is in KEKO until released or overwritten  or deleted)
    When this material cost is RELEASED on Nov 1 (without error) the status in KEKO becomes FR and you see is as the Current Cost estimate in Costing 2.
    NOW  IF SOMEONE creates a new cost estiomate on OCT 31 2010 (CK11n) for :
    Material:  1234
    Nov 1 2010
    version 1
    valuation variant Z01
    (notice this is the same key as before)
    AND SAVES it, KEKO will overwrite the VO Status date and save the new KA status data.
    The VO status and its information is now gone.
    Depending on the precise sequence of steps and timing - the value may or may not be visible in Costing 2,  But in the KEKO table and the tables that hold the values, the VO status record no longer exists.
    If the new cost estimate created and saved was meant to be the new standard, it should be MARKED so it can be in Costing 2 and so it can be released.
    If the new cost estimate was an effort to see the Nov 1 cost (I know people who use CK11n to create a cost rather than use CK13n to display a saved cost) and it is "accidently"saved - this is an issue. 
    I do a great deal of CK11n work, but my work is never meant to be released as inventory values.  Therefor I use different versions ( version 50, 51 52 etc) and that makes a different key combination and a new record is created in KEKO, and the VO record still exists.
    I hope that I have answered your question.
    Althea

  • Field description in the material master record

    Hello
    Our customer is requiring having 75 characters for the field MAKT-MAKTX instead of 40 as standard SAP. Is it possible to extend the length of this field up to 75 characters without any impact in SAP? Is there any way to go around this requirement without having a big impact in standard SAP?

    Hi
    I think you have raised the question in the wrong thread. Raise it here :
    /community [original link is broken]
    Vijay

  • Making of fields mandatory in Material Master

    Dear Gurus
    I am working on ECC 5.0
    I wanted to make mandatory fields for  material master in some of the views ..
    How to do that activity , can anyone give the clear cut idea about this how to do
    Thanx in advance
    Rgds
    Surya

    Hi,
    1. First go to OMS2 > Here for material type, get the "Field reference Key"
    2. Then go to OMS9 > Here in search help of Field sel. group, search for relevant field and select it.
    3. Now click on "Position" button and enter the Field reference Key got in Step1 and select it by pressing enter button. Now select "Reqd Entry" Radio button
    Also use OMSR to find the Field Selection key assigned to the Group
    You have to find the Field name of the material master field by pressing F1 and then F9 and get the field name then go for field selection

  • System demands Weight unit as a mandatory field in material master

    Hello friends,
    When I create a material with only basic data view, the system doesnot require the weight unit field(in basicdata1 view) as a mandatory field, but when I try to create a material with salesorg1 view , it makes the weight unit filed as a mandatory field and also populates the weight unit field with the value as "KG" by default. Could any one please help me to find out where I can see the configuration and the default values.
    Thanks,
    Ramineni.

    Hi Ramineni,
    Plaese go through the menupath to conttol the field selection in the Material Master just like the fields controlled in customer master. Here you can select the required fields as mandatory, suppress or Required. I believe you need to take consideration of Material Type while doing this.
    Spro->Logistics General->Material Master->Field Selection.
    Consider the transactions : OMSR & OMS9.
    Please let me know your thoughts.
    Thanks and Regards,
    Satheesh Durgi

  • Middleware settings to map CRM Z table fields with ECC material master flds

    Hi,
    We want to create  a Z table in CRM,this table willl have 2 fields External Material Group and Old Material Number.These 2 fields in CRM table are corresponding to same material master (MM03) fields in ECC.The changes to these fields done in ECC material master should be updated in CRM Z table.
    I want to understand the middleware settings I need to do in order to map the ECC and CRM fields.
    Thanks in advance for your help
    Swapnil

    Hi Swapnil,
    I am new to Middleware, I am also having same requirement , can you please tell me the process how you resolved this thread.
    Thanks in advance,
    Regards,
    Santosh.

  • Field attributes in material master

    Hi,
    The field attributes maintained for material master; is showing the significant fields –‘material assignment’ (sales view) and ‘quantity structure’ (costing view) have been set as ‘optional’ at the time of updation. 
    Further, standard price can be updated with ‘0’ value for new item code(manufactured item), which is assigned with ‘S’ price control indicator. 
    Kindly help us  to deactivate ‘costing with quantity structure’ for raw materials and consumables material types (OMS2).
    How can the  message attributes for M3 /132  for standard price updation to be reset as ‘error’. 
    Regards

    Hi Santosh,
    There is no solution in standard SAP for your Particular requirement.
    What you can do is in OMS9 make the fields mandatory by Transcation wise rather than Material type.
    Reg,
    Ashok
    Rewards Welcome.

Maybe you are looking for

  • Execute procedure in a package using the caller privileges?

    Is it possible to execute a procedure within a package using the privileges of the caller rather than the privileges of the package owner? So if we have a procedure that does a select, one that does an insert, and another for update and a 4th for del

  • Behaviour of VI Refnums changed from LV 8.2 to 8.5

    Hello, Obviously something has changed (and as I think resulting in a bug) with the handling of refnums when updating LV form 8.2 to 8.5: As I found out using probes, my calling vi starting an instance of a template vi with "FP.Open" is reporting a c

  • Financial statement version in fs00 how do i change the lanugage to english

    Hi Experts I am currently asked to train a beginners course AC010 for FI. Below is one of the tasks i have to take the students through.Please look at F is where my question is?? Enter the new G/L account 700## in the financial statement version INT

  • T430s Display Port resolution

    I have a T430s connected to a Lenovo mini dock station running Windows 7. I have just purchased a 27" monitor which supports up to 2560x1440 resolution. When connect to the monitor using a display port to DVI cable Windows will only allow a maximum r

  • Color Scheme Updates Not Working

    Color schemeing is hugely helpful for me. I recently migrated from a Win7 machine to a Mac and have been trying to change the color scheme. I uploaded a dark scheme I found, that worked okay, but when I go in to make some additional tweaks, they simp