Backflushing serialised components with REM

Hi guys,
I am aware of OSS note 100621 and therefore I know that SAP do not provide a process for backflushing serialised components in REM!
However, I was wondering whether there is a bespoke alternative or work-around process for backflushing serialised components during repetitive manufacturing?
Any ideas would be greatly appreciated
Thanks
Paul

100621 - MFxx with components requiring serial number
Version 3
2 Validity: 05.12.2000 - active
Language German (Master)
English
Compare versions SSCR Download
Content: Summary | Header Data | Validity
Symptom
During the backflush you cannot enter a serial number for components. The system generates error message IO304 or M7175 inevitably.
Other Terms
MF40, MF4U, MF42, MF43, MF44, MF45, MF46, MF47, serial number, MFBF
Reason and Prerequisites
The components require serial numbers.
Solution
For the backflush in repetitive manufacturing you must only use components for which no serial number requirement exists. This also applies to a manual withdrawal posting.
The menu path 'Goto - Serial number' specified in message M7175 is of no importance for repetitive manufacturing.
In contrast, serial numbers for goods receipts can be assigned by assemblies (as of Rel. 4.5).

Similar Messages

Assembly Orders with REM

Hi,
I came to know about the scenario of using sale order with REM in Assemble to order scenario.
I have already seen the write up available in Sap library.
Please let me know more about the advantages and practicability f the same.

Hello Mr. Reddy,
Thanks a lot for your guidance.
Please let me know can we use functinalities of Collective order scenario in Assembly orders , that is If the sale order is available for FG and MRP is run
then down level component planned orders will be created automatically.
No order release function is required for the down level components.
And availability cheak can also be carried out for the the FG sales order.
regards,
Ravindra

MB26 ,CO27 - goods issue components with serial number?

Hi ,everyone!
I know CO27 and MB26 can do goods issue to production order very easily and quickly!
But It seems CO27 and MB26 can not work well with the component with serial number.
I aslo know MB1A and MB1B can post goods issue for component with serial number.But in MB1A and MB11 , it is very difficult to can material by material number quickly while doing more then 100 components issue to one production order.
And for authorization purpose we restrict MIGO not to use goods issue for production order.
So I want to ask how CO27 and MB26 do goods issue for the component with serial number?
Or there is another ways to goods issue component with serial number to production order easily,exclude MB1A,MB11 and MIGO?
Thanks for any reply!

Hi Vivek
We use CO27 for goods issue to production order ,just like MB1A goods issue to production order.
But in the BOM components of the production orders ,some semi finished products are with with serial numbers ,so we can not use CO27 or MB26 to issue these components with serial numbers to production orders!

How to make link between xcelsius components with sap data using Web servic

Hi all,
I have a doubt regarding connection between Xcelsius components and SAP data.
I created one Web service using Function module and made a connection between xcelsius and that web service using binding URL. It shows imput and output parameters perfectly.
But I cant get any idea as to how to connect Xcelsius components with these parameters.
Can anybody help me out..
please its urgent.
Thanks,
Simadri

Have you bound your output parameters to ranges of cells? Select the item, then click the icon to the right of the Insert In: box and select the cells.
Add a spreadsheet component to your chart and bind it to the cells, then preview the model. Do you see the data coming through?
If you do, then you can click File > Snapshot > Export Excel Data. Then close Preview mode, and import data from spreadsheet and select the sheet you just exported. This gives you real data to work with when designing the dashboard.
Hope that helps.

How to use Flex Components with Flash?

Hi!!
I found a lot of very useful components in the web, but they are all for Flex, is it possible to use Flex Components with Flash IDE?
Thanks !!!
jenry
PS: this is one of the components I need to use (a tree with checkbox nodes)
http://www.sephiroth.it/file_detail.php?pageNum_comments=30&id=151
another one:
http://www.darronschall.com/weblog/2006/09/a-flex-2-checked-tree-control-component.cfm

Flex components are delivered as SWCs just like Flash components, but the
SWC format is incompatible with the Flash IDE.
Also, the default fl.. components in the Flash IDE are incompatible with
Flex components.
You should be able to load a Flex SWF into a Flash SWF as long as you aren't
using fl.. components in the Flash SWF. If the Flex SWF overlays things
in your Flash SWF then it might block interaction, but otherwise it
shouldn't. I don't think the statement you quoted is true for all
configurations.
But loading a Flex SWF into a Flash SWF isn't going to help you use those
Flex components from your Flash IDE. Try Flash Builder 4 to build out the
Flex portion of your application. I haven't tried it myself, but it I think
it is supposed to have better integration with Flash.

Facing problems in Registering AIA Components with OSB

Hi all,
I am trying to implement AIA on OSB for that as an initial step I am trying to Register AIA Components with OSB.
In this step I am facing problems getting 705 conflicts removing these conflicts manually is a huge task .
Can anyone suggest me good approach or if any one has removed AIA components jar please share with me.
Thanks
Phani

Hi Madhavi,
You said:
OMB+> OMBALTER LOCATION 'TEST_LOCATION' SET PROPERTIES ( HOST, PORT, SERVICE_NAME , SCHEMA, CONNECT_AS_USER,PASSWORD, VERSION, UOID,DATABASE_NAME) \
VALUES ( '$HOST', $PORT,'$SERVICE', '$TgtDBUser', '$TgtDBUser', 'TgtDBPWD','$
dbversion','true','$SERVICE');
Did you leave out the "$"-character for the TgtDBPWD variable in purpose? Could this be the source of your problem?
Regards,
Ed

Why Adf components with box outline in visual editor

When I drag and drop components from the Component Palette to a page in the visual editor, save it and open the page again, instead of the UI component, I see the components with box outline in the design view of the visual editor.
Why is the happening, and is there a way I can make the UI components to appear.
Thanks for your help in advance.

Are you using a brand new production build? (or have you got your hands on a non-public build! ;o) sometimes this happens with interim builds... If its a public build try the following....Go into the project properties and the node JSP Tag Libs...Remove the ADF libs and then reattach them....
Don't ask me why! but that sometimes works! ;o)
Regards
Grant Ronald
Oracle Product Management

Error binding table components with database tables

Hi, when i try to bind table components with database tables y receive this error
java.lang.NullPointerException
     at com.sun.sql.rowset.CachedRowSetXImpl.initMetaData(CachedRowSetXImpl.java:861)
     at com.sun.sql.rowset.CachedRowSetXImpl.getMetaData(CachedRowSetXImpl.java:2336)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.getMetaData(CachedRowSetDataProvider.java:1317)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.getFieldKeys(CachedRowSetDataProvider.java:489)
     at com.sun.rave.web.ui.component.table.TableRowGroupDesignState.resetTableColumns(TableRowGroupDesignState.java:261)
     at com.sun.rave.web.ui.component.table.TableRowGroupDesignState.setDataProviderBean(TableRowGroupDesignState.java:163)
     at com.sun.rave.web.ui.component.table.TableDesignState.setDataProviderBean(TableDesignState.java:250)
     at com.sun.rave.web.ui.component.TableDesignInfo.linkBeans(TableDesignInfo.java:162)
     at com.sun.rave.insync.models.FacesModel.linkBeans(FacesModel.java:1042)
     at com.sun.rave.designer.DndHandler.processLinks(DndHandler.java:2126)
     at com.sun.rave.designer.DndHandler.importBean(DndHandler.java:880)
     at com.sun.rave.designer.DndHandler.importItem(DndHandler.java:702)
     at com.sun.rave.designer.DndHandler.importDataDelayed(DndHandler.java:376)
     at com.sun.rave.designer.DndHandler.access$000(DndHandler.java:114)
[catch] at com.sun.rave.designer.DndHandler$1.run(DndHandler.java:298)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

There are a thing that I don't undertand. When I try to bind samples database table (Travel, for example) to table components, there are no errors. But when I try to bind table component with my remote postgresql database table, yes...the table component disappear and only a "Table" string is displayed....this error is because I use remote database?? Or because it's PostgreSQL??
Thanks.

Using BC4J Components with different App Servers

Can we use BC4J with 3rd party Application Servers (WebSphere, Weblogic, iPlanet etc)?
If so any advantages (Performance, Implementation, installation) in using these components with Oracle iAS?
Thanks
null

BC4J allows different ways of deploying your application.
1) Local Mode : where your client application and BC4J application are colocated togther and running in the same VM
2) As a EJB session bean
3) As a corba server object.
Using the Local mode deployment option you can deploy the BC4J application to any appservers (weblogic, websphere, iplanet) as long as they have standard VM and if your client application is JSP or Servlet then the appservers need a JSP or Servlet engine.
In JDeveloper 3.1 you can deploy BC4J applicaiton as EJB session bean to Oracle8i
In JDeveloper 3.2 ( which will released in next few weeks) you can deploy BC4J application as EJB session bean to Oracle8i , Oracle iAS and weblogic .
iAS comes preconfigured with BC4J runtime by default
raghu

Backflush Components With Movement Type 101 When Confirm Production Order

Hi PP Gurus,
I found that we have a backflushing material (procurement type: F) in 'Good Movement' with movement type 101 instead of 261.
The movement type of this material (procurement type: F) in reservation is 261. How did system determine the movement type 101 there?
Is there any user exit used there?
Appreciate any help. Thanks.
Regards,
Sun Qiang

>
Qiang Sun wrote:
> Hi Arun,
>
> The control key has not been changed.
>
> In another production order, the error ocurred on another component which is the first line in 'Goods Movement'.
>
> Cheers,
> Sun Qiang
Hi,
Pl check in component overview which operation has been assigned to pericular material in Operation tab.
It should be 10.
Arun

In production order backflush how components select valuation type

Hi,
i am using backflush in production order planning where components have valuation type. when i stage them i give the valuation type. but when i confirm a operation the backflush is giving problem.
the problem is i have to enter the valuation type of componet which has to be backflushed. is there any provison to make it as default. which valaution type componenet is staged it has to be backflushed automatically.
thanks in advance
regards
madan

Madan,
During MF60-pull list where exactly do you enter the valuation type?
Try to understand the concept?
Let us say i have storage loc A and production storage loc B.
Now in production order/REM order you have entered the storge loc as B and you have stock in A.
After running MRP and when you goto MF60, for that component, system will create storage loc order during staging.
Once it come into storage loc B, how system will identify the stock that it is reserved for this order?
If you have eneterd valuation type(I could not find), once it is in storage loc B, is there any identification for that order in storage loc B.
Please come back so that I can help you?

Batch for Components in REM

Hello All,
Can someone tell me where do I specify Batch Numbers for Components and Final Assembly in Repetetive Manufacturing. In discrete Manufacturing (inside Production Order), when I click BOM, the bom shows up and Batch number field shows next to components which are Batch Managed. But in Repetetive manufacturing inside 'Planned Order', when I clicked BOM, it showed me the BOM components, but did not show me the field next to them where I could put a Batch number for the components, managed by batches.
Can someone throw some light.
thanks in advance,
Sachin

Hi,
U can assign the Batch Number for Finished material at MFBF screen . For Components batch number check with "Postwith correction screen " of MFBF. If u set bacth search procedure at REM profile batch number for Components will com automatically.
Pradeep

Backflush of components is not happening

Dear all,
I am having repetitive manufacturing scenario, we are in process of implementing IS AUTO, we do planned order confirmation in SAP in SAP APO system, then costing and other activities flows to SAP R/3,
we have defined REM profile in R/3 and assigned the same to materials.
When I am doing confirmation in APO using /SAPAPO/PPC1, while saving it says backflush happens successfully, it even creates the stock of my header item, but it is not consuming components stock assigned to stations.
No document is been generated for movement type 261 for any of component.
Requesting you to help me out if I am missing any setting or configuration.
Regards,
Pankaj

Dear Pankaj,
Check whether in the REM profile the check box is included for GI at the time of GR posting in control
data 1.
Also ensure the movement assigned in the third tab under movement types is for 261.
Check whether you are able to see any error movements in MF47 for the date.
Regards
Mangalraj.S

Possible to to Prod subcontracting with REM

Hi,
Like we do for Production order , is there a control key for Repetitive mfg plan order to sendout operation for subocntracting.
if yes , what are difference with Production order flow.
Thanks much in advance for help,
Jatin

Hi Jatin,
There is no any separate control key as such for REM subcontracting even I have doubt that operation sub-contracting is possible in REM scenario. I have never worked on such but in my understanding if you are using a reporting point backflush then this may be achieved.
You can use direct sub-contracting where this is possible means keep subcontracted incoming SF material as procurement type F and take the help of MM expert to show the consumable raw material if any in the PR created. In this type of scenario PR is created for subcontracting material and you can track it like a separate subcontracting material.
Also for more info refer below threads,
Operational level subcontracting in repetitive manufacturing
Repetitive manufacturing:subcontracting
Re: Subcontracting in REM
Regards,
Narresh

Connecting older amp without HDMI to newer TV, Blu Ray, HD cable components with HDMI

Hi - I have an older Yamaha RXV-600 receiver with no HMDI connectivity, plus a newer Sony HDTV, Samsung Blu Ray player and HD cable box, all of which have HDMI connectivity. Can someone suggest how I can "maximize" the connectivity between these components, given the receivers HDMI connectivity limitations? Thanks in advance!Conne

Hook all the devices to the TV, then an optical out from the TV to the receiver. If you have enough audio inputs on that unit, you could do audio from each device to it.
Best Buy employee, 15 years selling electronics

Backflushing serialised components with REM

Similar Messages

Maybe you are looking for