Background and space issues in IE
A coworker has designed a site. The page looks great in all
browsers except IE. In IE the background behind the text shows up
white. It should have a textured background like the rest of the
page. There is also some spacing issues with the graphics. Here is
the link so that you can see what I'm talking about. Any
suggestions are welcome!
http://www.laurelmanor.net/test/aboutusnew.html
You're missing the "#"
<body bgcolor="1c1a12">
should be
<body bgcolor="#1c1a12">
You have a couple of other issues which would be worth
addressing
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.laurelmanor.net%2Ftest%2Fabou tusnew.html
Hope this helps
Jo
"pixelchick80" <[email protected]> wrote in
message
news:ev3hd5$4so$[email protected]..
>A coworker has designed a site. The page looks great in
all browsers except
>IE.
> In IE the background behind the text shows up white. It
should have a
> textured
> background like the rest of the page. There is also some
spacing issues
> with
> the graphics. Here is the link so that you can see what
I'm talking about.
> Any
> suggestions are welcome!
>
>
http://www.laurelmanor.net/test/aboutusnew.html
>
Similar Messages
-
Hard disk partition issue and space issue
Hello i was trying to do a partition on my hard disk on my macbook pro retina. Wen i go to disk utility and try it says i need to repair the disk. I used command r in reboot and repaired but still having issues. When i look at space i get two different space available on macintosh HD. Here are the pictures you will see the space available is different depending what i choose. I am confused. Any help is appreciated. Here are the pics.
When you boot using Cmd-R, you're booting from a hidden Recovery Partition. That partition is using part of the space that is the size difference you're seeing between the Media line (upper picture) and the boot partition line. You can turn on the Debug Menu which shows the extra partitions using these directions.
I'm not sure but I suspect the issue may be that your boot partition is encrypted. -
I keep changing my background (wallpaper) but every time I move to a different space it resets the background to the default. I've tried everything I can think of but can't fix it.
this would indicate that your dock restarts whenever you change spaces. delete the file homedirectory/library/preferences/com.apple.dock.plist and log out/in. your dock, spaces and exposé will be reset to the defaults. set up spaces again and see if this stops happening.
-
I have some side nav items that are not showing the background color. Can't figure out why.
http://www.aptcoweb.com/dev/aptcoFluid/
Also, 3 divs near the bottom with the class of col are not floating. What's wrong there?larrycfc wrote:
Interesting, Nancy. I already had it targeted in .side li a:hover but that wasn't working. Too specific? I moved those selections into simple .side a:hover and it works. Then I disabled the ones in li and it still works. What's the explanation for this behavior?
Its because you have no anchor inside .side li - the anchor is inside .side
<li class="side"><a href="/promo/index.htm">Promotional<br />Products</a></li>
For .side li a:hover to work the structure would need to look like below:
<div class="side">
<li><a href="/promo/index.htm">Promotional<br />Products</a></li>
</div> -
Issue with Visibility Settings for Backgrounds and Layers
I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave -
TS1424 How do I clear my video queue if there was a space issue and I've already paid for them?
How do I clear my video queue if there was a space issue and I've already paid for them?
1. Sync wasn't intended to be used in that manner. You would be better off carrying around a USB Flash Stick with Portable Firefox for use on "strange" PC's.
2. You could open the "Library" {Ctrl + Shift + B} and highlight all those bookmarks and then delete them all at once. But that would also delete all the other bookmarks, and it isn't foolproof. All another person would need to do it to '''''restore''''' a bookmark backup file that has your bookmarks. Beyond that, a new Profile could be created and then the current Profile deleted; but that's "messing with" someone else's computer - an action that is worthy of terminating a friendship over, IMO.
And if that "public" computer was set up properly, Sync should have been disabled. -
I'm not sure when it began, but now my Macbook Air only shows a black background and a User Name and Password dialog box when I wake it from sleep. It used to show my desktop background blurred with my user name and icon displayed with only a text field for entering my password. I'm currently using Yosemite (OS X 10.10.1) and all updates have been done. Any help or suggestions would be greatly appreciated as I know this isn't a real problem, just an annoyance since I couldn't find how to change it back in the System Preferences.
I just have to point out that after looking at a related post (https://discussions.apple.com/message/22661092#22661092), it brought to memory that my issue most certainly began happening after I added some DoD certificates to the keychain. This obviously has something to do with it, but it still leaves me wondering what actually causes this to happen. :/
-
I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!
This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way. -
I recently upgraded from Crystal 11.5 to Crystal 2008. Since then I have been battling a host of problems trying to make this work. This is the latest.
I had a problem running some older reports in a web application. I was getting the Login Failed error, which can mean about anything. So I was going to upgrade the report definition to the new Crystal 2008 format. Since I installed Crystal 2008, I have been having an issue with the report designer. The disoplay would not refresh the background. Whatever was on the screen when you opened the designer was in teh background and if you opened a dialog while in the designer, it remained on the screen even though the function completed successfully. This confusing display made the designer impossible to work with.
So I decided to reinstall Crystal 2008 to see if there was something wrong in the setup. I opend control panel and uninstalled all the crystal 2008 components, which included Crystal 2008 SP2, Crystal 2008 SP3 and one other component. All the uninstalls ran successfully. I still have Crystal Reports XI release 2 installed.
I tried to run the install for Crystal. The install runs fine until it comes to the section to register the dll's. Then it fails. Below is the first message that I get. After that I get the same message for every module to be registered.
Error 1904. Module C: u2018program Files\BusinessObjects\BusinessQbjects Enterprise 12.0\win32_x86\ReportConvTool .dll failed to register.
HRESULT -2147024770. Contact your support personnel.
I have every version of the .Net framework on this machine and they are all up to the most current level. I have Visual Studio 2005 and Visual Studio 2008 on this machine as well. I am an administrator, and I do not have permission issues.
I am getting very weary of dealing with Crystal Reports technical problems. Nothing should be this difficult to make it work out of the box. Can someone help me.Hello,
PLEASE don't post the same question in multiple forums.
Install SP3 and test again and then search this for forum as well as Microsoft's site for the 1904 error. It's an MSIExec error code. Typically it's missing Windows dependencies or your PC needs to upgrade the MS Installer program.
Usually when dll's fail to register is because the OS is missing windows dependencies and likely the C++ runtime package.
Thank you
Don -
Running the alv report in background and sending it thro email
hi,
i have to run the alv report in background and send the output through emailHi
Many a times there is a requirement to display ALV Grid (not ALV List) in the background Job. I have checked the SDN Forum for the same and it has been mentioned that ALV Grid cannot be displayed in Background, but the list output of ALV is possible. So user wont have the actual Grid interface but the List interface.
There is a workaround to display ALV Grid in Background Job. The only restriction is you cant schedule the job through SM36. You need to execute the transaction of the report program, fill in the selection screen data and hit Execute.
The job would be executed in background. User will be able to see the Job Log and Job Status after executing the program. User doesnt have to go to SM37 to view the job status/log. Once the Job Status is changed to COMPLETED, user can click on DISPLAY SPOOL to view the ALV Grid.
Limitations:
Cant schedulea background job
The session should be active until the background job is completed. If the session is closed, then user wont be able to check the output in ALV Grid. User would be able to check the output through spool or SM37
Advantages:
If the spool width is greater than 255 characters, then the entire width could be seen in the output because the output is directed to an ALV Grid and not to spool
Interface of ALV Grid is available instead of ALV List even though its a background job.
Program wont give the TIME OUT error
Steps Required:
1. Once you execute the program, the following screen would be displayed
2. Click Display Job Status to check the Status of the Background Job
3. Click on Display the Job Log to check the Log
4. Click on Display Job Status to check the Job Status
5. Click on DISPLAY SPOOL to check the spool content once the Job Status is changed to COMPLETED. Output is displayed in ALV Grid
Programs:
1. Two different programs needs to be created
ZPROGRAM_ONE: This is the 1st program, where the selection screen and all the data validations would be done. Error handling for invalid data should be done in this program.
Once the data validation is done, this program would call the 2nd program ZPROGEAM_TWO. Build the logic to display ALV Grid in this program. The logic will only display ALV in foreground and it wont be reflected in the spool.
ZPROGRAM_TWO: This program would fetch all the data and do all the processing. If you want the spool output along with ALV Grid output, then build the logic in this program to display ALV Grid.
*& Report ZPROGRAM_ONE *
REPORT zprogram_one .
PRASHANT PATIL
TABLES : mara,
tsp01.
type-pools:slis.
TYPES : BEGIN OF t_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
END OF t_mara.
DATA : i_mara TYPE STANDARD TABLE OF t_mara,
wa_mara TYPE t_mara,
wa_index TYPE indx, " For Index details
wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
i_jobsteplist TYPE STANDARD TABLE OF tbtcstep, " For spool number
wa_params TYPE pri_params, " To Get Print Parameters
wa_jobhead TYPE tbtcjob, " To know the status of job
wa_jobsteplist TYPE tbtcstep, " To know the spool
w_jobname TYPE tbtco-jobname, " Job name for bckgrnd job
w_jobcount TYPE tbtco-jobcount, " Unique id for bckgrd job
w_path TYPE string, " Upload path
w_lsind TYPE sy-lsind, " Index
wa_seltab TYPE rsparams,
i_seltab TYPE STANDARD TABLE OF rsparams,
wa_index1 TYPE indx, " For Index details
wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF i_fieldcat.
CONSTANTS DECLARATION *
CONSTANTS :
c_a(1) TYPE c VALUE 'A',
c_m(1) TYPE c VALUE 'M',
c_l(1) TYPE c VALUE 'L',
c_c(1) TYPE c VALUE 'C',
c_zfdr(4) TYPE c VALUE 'ZFDR',
c_x(1) TYPE c VALUE 'X',
c_locl(4) TYPE c VALUE 'LOCL', " Destination is LOCAL
c_f(1) TYPE c VALUE 'F', " Job Status - Failed
c_s(1) TYPE c VALUE 'S',
c_p(1) TYPE c VALUE 'P'.
SELECTION SCREEN PARAMETERS
SELECT-OPTIONS : s_matnr FOR mara-matnr.
START-OF-SELECTION.
Before the export, fill the data fields before CLUSTR
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
EXPORT s_matnr
TO DATABASE indx(st) FROM wa_index ID wa_index_key.
To Open the Job for background processing
PERFORM open_job.
To get the print parameters
PERFORM get_print_parameters.
Submit the job in background
PERFORM job_submit.
Close the background job
PERFORM job_close.
This is the output screen with the buttons ********
Create 3 buttons DISPLAY SPOOL, STATUS, JOBLOG
SET PF-STATUS 'ZS001'.
WRITE: / 'The program is submitted in Background'.
WRITE: / 'Press DISPLAY SPOOL to see the spool'.
WRITE: / 'Press STATUS to see the status of the background'.
AT USER-COMMAND.
If user presses the 'BACK' button
IF sy-ucomm = 'BAK'.
IF wa_jobhead-status = c_f OR
wa_jobhead-status = c_a.
LEAVE TO SCREEN 0.
ENDIF.
ENDIF.
If the user presses the 'DISPLAY SPOOL' Button
IF sy-ucomm = 'DISPLAY'.
PERFORM display_spool.
ENDIF.
If the user presses the 'JOB STATUS' Button
IF sy-ucomm = 'STATUS'.
PERFORM display_status.
ENDIF.
If the user presses the 'JOB LOG' Button
IF sy-ucomm = 'JOBLOG'.
PERFORM display_job_log.
ENDIF.
*& Form open_job
text
--> p1 text
<-- p2 text
FORM open_job .
This is to Create a new job which is to be submitted in background to
process sales order/delivery/invoice
Here we would get a unique id ( Jobcount ) which identifies our job
along with the job name which we have assigned to our job
CONCATENATE sy-uname
sy-datum
sy-uzeit
INTO w_jobname . " Assign unique jobname
CALL FUNCTION 'JOB_OPEN'
EXPORTING
DELANFREP = ' '
JOBGROUP = ' '
jobname = w_jobname
SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
JOBCLASS =
IMPORTING
jobcount = w_jobcount
CHANGING
RET =
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " open_job
*& Form get_print_parameters
text
--> p1 text
<-- p2 text
FORM get_print_parameters .
DATA : l_valid TYPE c.
This is to get the Print Parameters for the job which is to be
submitted in background to process sales order/delivery/invoice
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_ID = C_CHAR_UNKNOWN
ARCHIVE_INFO = C_CHAR_UNKNOWN
ARCHIVE_MODE = C_CHAR_UNKNOWN
ARCHIVE_TEXT = C_CHAR_UNKNOWN
AR_OBJECT = C_CHAR_UNKNOWN
ARCHIVE_REPORT = C_CHAR_UNKNOWN
AUTHORITY = C_CHAR_UNKNOWN
COPIES = C_NUM3_UNKNOWN
COVER_PAGE = C_CHAR_UNKNOWN
DATA_SET = C_CHAR_UNKNOWN
DEPARTMENT = C_CHAR_UNKNOWN
destination = c_locl " LOCL
EXPIRATION = C_NUM1_UNKNOWN
immediately = space
IN_ARCHIVE_PARAMETERS = ' '
IN_PARAMETERS = ' '
LAYOUT = C_CHAR_UNKNOWN
LINE_COUNT = C_INT_UNKNOWN
LINE_SIZE = C_INT_UNKNOWN
LIST_NAME = C_CHAR_UNKNOWN
LIST_TEXT = C_CHAR_UNKNOWN
MODE = ' '
new_list_id = c_x
PROTECT_LIST = C_CHAR_UNKNOWN
no_dialog = c_x
RECEIVER = C_CHAR_UNKNOWN
RELEASE = C_CHAR_UNKNOWN
REPORT = C_CHAR_UNKNOWN
SAP_COVER_PAGE = C_CHAR_UNKNOWN
HOST_COVER_PAGE = C_CHAR_UNKNOWN
PRIORITY = C_NUM1_UNKNOWN
SAP_OBJECT = C_CHAR_UNKNOWN
TYPE = C_CHAR_UNKNOWN
user = sy-uname
USE_OLD_LAYOUT = ' '
UC_DISPLAY_MODE = C_CHAR_UNKNOWN
DRAFT = C_CHAR_UNKNOWN
ABAP_LIST = ' '
USE_ARCHIVENAME_DEF = ' '
DEFAULT_SPOOL_SIZE = C_CHAR_UNKNOWN
PO_FAX_STORE = ' '
NO_FRAMES = C_CHAR_UNKNOWN
IMPORTING
OUT_ARCHIVE_PARAMETERS =
out_parameters = wa_params
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " get_print_parameters
*& Form job_submit
text
--> p1 text
<-- p2 text
FORM job_submit .
The job which we have created & the unique id ( jobcount ) which we
have got identifies our job. Hence those parameters are passed along
with the name of the background program "ZPROGRAM_TWO"
The job is submitted in background.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
ARCPARAMS =
authcknam = sy-uname
COMMANDNAME = ' '
OPERATINGSYSTEM = ' '
EXTPGM_NAME = ' '
EXTPGM_PARAM = ' '
EXTPGM_SET_TRACE_ON = ' '
EXTPGM_STDERR_IN_JOBLOG = 'X'
EXTPGM_STDOUT_IN_JOBLOG = 'X'
EXTPGM_SYSTEM = ' '
EXTPGM_RFCDEST = ' '
EXTPGM_WAIT_FOR_TERMINATION = 'X'
jobcount = w_jobcount
jobname = w_jobname
LANGUAGE = SY-LANGU
priparams = wa_params
report = 'ZPROGRAM_TWO'
VARIANT = ' '
IMPORTING
STEP_NUMBER =
EXCEPTIONS
bad_priparams = 1
bad_xpgflags = 2
invalid_jobdata = 3
jobname_missing = 4
job_notex = 5
job_submit_failed = 6
lock_failed = 7
program_missing = 8
prog_abap_and_extpg_set = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " job_submit
*& Form job_close
text
--> p1 text
<-- p2 text
FORM job_close .
Once the job is submitted in background then the job is closed
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
AT_OPMODE = ' '
AT_OPMODE_PERIODIC = ' '
CALENDAR_ID = ' '
EVENT_ID = ' '
EVENT_PARAM = ' '
EVENT_PERIODIC = ' '
jobcount = w_jobcount
jobname = w_jobname
LASTSTRTDT = NO_DATE
LASTSTRTTM = NO_TIME
PRDDAYS = 0
PRDHOURS = 0
PRDMINS = 0
PRDMONTHS = 0
PRDWEEKS = 0
PREDJOB_CHECKSTAT = ' '
PRED_JOBCOUNT = ' '
PRED_JOBNAME = ' '
SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
STARTDATE_RESTRICTION = BTC_PROCESS_ALWAYS
strtimmed = c_x
TARGETSYSTEM = ' '
START_ON_WORKDAY_NOT_BEFORE = SY-DATUM
START_ON_WORKDAY_NR = 0
WORKDAY_COUNT_DIRECTION = 0
RECIPIENT_OBJ =
TARGETSERVER = ' '
DONT_RELEASE = ' '
TARGETGROUP = ' '
DIRECT_START =
IMPORTING
JOB_WAS_RELEASED =
CHANGING
RET =
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " job_close
*& Form display_spool
text
--> p1 text
<-- p2 text
FORM display_spool .
To Read the Job to get the spool details
DATA : l_rqident TYPE tsp01-rqident, " Spool Number
l_spoolno TYPE tsp01_sp0r-rqid_char.
CLEAR : l_rqident,
w_lsind,
wa_jobsteplist.
REFRESH : i_jobsteplist.
SET PF-STATUS 'ZAR02'.
Get the Spool Number
CALL FUNCTION 'BP_JOB_READ'
EXPORTING
job_read_jobcount = w_jobcount
job_read_jobname = w_jobname
job_read_opcode = '20'
JOB_STEP_NUMBER =
IMPORTING
job_read_jobhead = wa_jobhead
TABLES
job_read_steplist = i_jobsteplist
CHANGING
RET =
EXCEPTIONS
invalid_opcode = 1
job_doesnt_exist = 2
job_doesnt_have_steps = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Read the Job Step list to get the spool number
READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
CHECK wa_jobsteplist-listident <> space.
Spool Number
l_rqident = wa_jobsteplist-listident.
MOVE l_rqident TO l_spoolno.
Check the spool in TSP01
SELECT SINGLE * FROM tsp01 WHERE rqident = l_rqident.
IF sy-subrc = 0.
LEAVE TO LIST-PROCESSING.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = l_spoolno
IMPORTING
RC =
STATUS =
PERFORM show_alv.
ENDIF.
w_lsind = sy-lsind.
IF sy-lsind GE 19.
sy-lsind = 1.
ENDIF.
ENDFORM. " display_spool
*& Form show_alv
text
--> p1 text
<-- p2 text
FORM show_alv .
Before the import, fill the data fields before CLUSTR.
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT i_mara
FROM DATABASE indx(st) ID wa_index_key1 TO wa_index1.
FREE MEMORY ID wa_index_key1.
This prepares the field-catalog for ALV.
PERFORM prepare_fieldcatalog.
This displays the output in ALV format .
PERFORM display_alv.
ENDFORM. " show_alv
*& Form display_status
text
--> p1 text
<-- p2 text
FORM display_status .
To Display the STATUS of the JOB which is exectued in background
CLEAR : wa_jobsteplist.
REFRESH : i_jobsteplist.
WRITE:/ 'DISPLAYING JOB STATUS'.
CALL FUNCTION 'BP_JOB_READ'
EXPORTING
job_read_jobcount = w_jobcount
job_read_jobname = w_jobname
job_read_opcode = '20'
JOB_STEP_NUMBER =
IMPORTING
job_read_jobhead = wa_jobhead
TABLES
job_read_steplist = i_jobsteplist
CHANGING
RET =
EXCEPTIONS
invalid_opcode = 1
job_doesnt_exist = 2
job_doesnt_have_steps = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
To Display the status text as per the status type
CASE wa_jobhead-status.
WHEN 'S'. WRITE: / 'Scheduled'.
WHEN 'R'. WRITE: / 'Released'.
WHEN 'F'. WRITE: / 'Completed'.
WHEN 'A'. WRITE: / 'Cancelled'.
WHEN OTHERS.
ENDCASE.
IF sy-lsind GE 19.
sy-lsind = 1.
ENDIF.
ENDFORM. " display_status
*& Form display_job_log
text
--> p1 text
<-- p2 text
FORM display_job_log .
To display the log of the background program
LEAVE TO LIST-PROCESSING.
CALL FUNCTION 'BP_JOBLOG_SHOW_SM37B'
EXPORTING
client = sy-mandt
jobcount = w_jobcount
joblogid = ' '
jobname = w_jobname
EXCEPTIONS
error_reading_jobdata = 1
error_reading_joblog_data = 2
jobcount_missing = 3
joblog_does_not_exist = 4
joblog_is_empty = 5
joblog_show_canceled = 6
jobname_missing = 7
job_does_not_exist = 8
no_joblog_there_yet = 9
no_show_privilege_given = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_job_log
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Material no.'.
wa_fieldcat-outputlen = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERSDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Creation date'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Name of Person'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LAEDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = ' Last Change'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " prepare_fieldcatalog
*& Form display_alv
text
--> p1 text
<-- p2 text
FORM display_alv .
Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = i_fieldcat
tables
t_outtab = i_mara.
ENDFORM. " display_alv
ZPROGRAM_TWO: This is the 2nd program which would be called from program ZPROGRAM_ONE.
*& Report ZPROGRAM_TWO *
REPORT zprogram_two .
PRASHANT PATIL
TABLES : mara.
TYPE-POOLS:slis.
TYPES : BEGIN OF t_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
END OF t_mara.
DATA : i_mara TYPE STANDARD TABLE OF t_mara,
wa_mara TYPE t_mara,
wa_index TYPE indx, " For Index details
wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
wa_index1 TYPE indx, " For Index details
wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF i_fieldcat.
SELECT-OPTIONS : s_matnr FOR mara-matnr.
Before the import, fill the data fields before CLUSTR.
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT s_matnr
FROM DATABASE indx(st) ID wa_index_key TO wa_index.
FREE MEMORY ID wa_index_key.
SELECT matnr
ersda
ernam
laeda
FROM mara
INTO TABLE i_mara
WHERE matnr IN s_matnr.
PERFORM prepare_fieldcatalog.
PERFORM display_alv.
Before the export, fill the data fields before CLUSTR
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
EXPORT i_mara
TO DATABASE indx(st) FROM wa_index1 ID wa_index_key1.
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERSDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LAEDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " prepare_fieldcatalog
*& Form display_alv
text
--> p1 text
<-- p2 text
FORM display_alv .
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = i_fieldcat
TABLES
t_outtab = i_mara.
ENDFORM. " display_alv
its possible to display ALV Grid using OO ALV. Following code can be used instead of FM.
In the PBO, add following code
SET PF-STATUS 'ZSTAT'.
If program is executed in background
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING
e_offline = off.
IF off IS INITIAL.
IF container1 IS INITIAL.
CREATE OBJECT container1
EXPORTING
container_name = 'CC_ALV1' .
ENDIF.
ENDIF.
CREATE OBJECT g_grid1
EXPORTING
i_parent = container1.
CALL METHOD g_grid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
i_save = 'A'
i_default = ' '
is_layout =
is_print =
IT_SPECIAL_GROUPS =
it_toolbar_excluding =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = i_output
it_fieldcatalog = i_fieldcatalog
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Reward points if useful
Regards
Anji -
There is an space issue in datatop.Could you please help me out in deleting any logs and unnecessary data in that location.As the mount which own datatop is completely filled.
Hi,
Do you have any archivelog files on this disk? If so, consider moving/deleting obsolete files. For datafiles/tablespaces, if it is possible to shrink it, please do so. Otherwise, you need to move it to some other disk.
Also, if AUTOEXTEND is enabled, you need to disable it (at least for now) until you have more space on this disk.
You may also refer to the following document, it should be helpful.
Note: 274666.1 - Cleaning An 11i Apps Instance Of Redundant Files
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=274666.1
Regards,
Hussein -
How do I change the color of the background (working) space in Adobe Elements 11 from that awful olive green color to light gray or black or white?
Thanks so much for responding! I tried right clicking on the space around the image and nothing happens. No drop down menu appears for me to select a different color! Appreciate your help . . . Diane
-
How to change color of background and font in Message Boxes
I have a req, where I have to display a warning message for certain condition. I did that using pagecontext.putDialogMessage(msg).
But the business wants to have the displayed message in a more bright color. I didn't come across any documentation on how to change the background and font of a Message Box. Can you please help me out in solving this issue ??user597481 ,
Here are my responses:
For displaying a warning message, putDialogMessage takes only an OAException bean.
OAException is a java class and not a java bean.I'm not clear on how to use a OARawTextBean to display a warning message. I tried looking thru dev guide but still am not clear on how to do it.
>>
1)Add a raw text bean in pagelayout region at the top.
2) Now in ur code whenever u need to throw exception, set some page parameter say xxx=true and then, use pageContext.redirectToCurrentPage
that will redirect the flow to process request.3)In process request based on page parameter xxx=true, u can get exception message and use setValue in raw text bean to show it.
I hope this is clear
--Mukul -
My emails are not coming through to my phone unless I manually refresh. I have three accounts setup (Yahoo! and 2 school email accounts). Both school accounts, when I sign on from a computer says something about Outlook: one says Mircosoft outlook and the other says Outlook live.
I contacted my school and got the correct settings for each account. They work because I get the emails as long as I manually refresh. I initially had my phone set to check for mail every hour but after realizing it was not automatically doing this, I set it for every five minutes. That still didn't help.
Out of frustration, I called Verizon who told me they knew nothing about such an issue. They connected me to Samsung who said the same thing. Apparently they were both lying as I have Googled this issue and see that it has been posted since Sept 2010. I just have not noticed a solution (possibly overlooking it).
The solution that they gave me was so a hard reset (didn't work), delete then re-add the accounts (didn't work) or use a workaround. My response to their last suggestion was that I did not feel it was necessary for me to do that when the phone I purchased was supposed to handle email. This has been an issue since I got the phone in Nov 2010 when I switched to VZ. I didn't really notice it until this month because I was having text messaging issues which they didn't fix until this month.
Samsung ended up telling me to send them my phone and they would troubleshoot it but I had to contact VZ about getting a loaner phone as they were going to have it for a week. When I called VZ back, they told me they would just send me a replacement phone and to not send the phone to Samsung because they could have given me a defective phone. The order wasn't placed because their system was down that Friday and the guy was supposed to call me back. He never did so I called VZ a third time.
The tech support rep told me that she was positive that if I got a brand new phone I would still have the same problem because its a known issue that Samsung has yet to fix. Also she had the same phone and also some other people she worked with. She told me to make sure I deleted junk mail, sent stuff, kept the inbox down, and empty the trash and that should help. She was supposed to call me back and see if it helped (which it didn't). She never called back....that was Monday and today is Friday.
Now I'm feeling like they are lying to me because they don't want to replace my device. Then on top of that they told me it would more than likely be a refurbished device instead of a brand new device even though I still have a warranty. Should I push for a new phone or is this really a known issue with Samsung that they have yet to fix? If it is a Samsung issue, what's the workaround until they actually fix it?
By the way, Gmail works almost instantaneously. They told me to forward all of my mail there but that didn't work for my two school accounts. I don't like that anyway.
As for the contact issues, I just noticed two weeks ago that my Facebook and Twitter contacts are unsyncing themselves. I don't have all of my Facebook friends or Twitter followers in my phonebook but those whose phone numbers I have, are linked to their Facebook and or Twitter accounts but I notice that both of these accounts unlink themselves. I have no idea why this happens. I keep having to go back into my phonebook and relink about 30 people to their Facebook and or Twitter profiles. Any idea why?10sEn wrote:
In your email app, have you tried going into each account, pressing the menu button, account settings, and setting email check frequency to the desired time?
If that's not the issue, then perhaps pressing the menu button at the home screen, going into settings, accounts and sync, and clicking the background data option is the issue.
The reason why Gmail works well is that instead of polling (which is what the email app uses, where it queries the account to see if there's anything new), it pushes your email through meaning that it's virtually instantaneous.
With regards to the Twitter and Facebook issue, try going into the accounts and sync area that I mentioned before. There, you will be able to set the SNS sync interval and sync the contacts, birthdays, and whatever else it allows. You'll probably have to click on each of those accounts to check various options before it will autosync.
My frequency is set to every 5 mins. That hasn't worked.
The background data sync option is clicked already.
The Twitter and Facebook SNS syncing is set. I have noticed though that sometimes when I go in there, the sync arrow is red by Twitter and Facebook. I uncheck the box and recheck it and then it turns green again. What I don't know is why it randomly turns red in the first place. I'm assuming this is the reason the Facebook and Twitter stuff unsyncs itself. -
Some PDF Files Shown with Black Background and White Text - Annoying
Hi All,
Recently some of my pdf documents, stored on my phone, are displayed with a black background and white text. This is quite annoying. A few weeks ago I didn't have this problem. All of my pdf documents had a white background with black text.
I'm a new iPhone user without much experience with the device. I have the 4.3 version of the software and update when prompted. I use Files Pro, FileApp Pro and QuickOffice applications in conjunction with DiskAid.
If there is something I can do to correct the situation, please let me know. If the problem is with Apple, they need to fix the situation. My phone, which used to be a great device for storing documents, has turned into an annoying bug.
Thanks,
MikeHello imcpa2!
Try taking a look at this thread for possible solutions:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/laserjet-1536-dnf-fax-pdf-printing-pro...
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.
Maybe you are looking for
-
Questions on tracking iphone and viewing pictures and texts
is it possible to track the location of another persons iphone? also is it possible to look up past texts/picture messages on a persons iphone to "spy"?
-
HT5129 how can I get rid of mobile me stuff all over my computer?
have mobile me stuff all over my computer. how do I get rid of all of it? mobile me keeps popping up all over the place and the icons won't go away thanks janice
-
First a little backgorund. My macbook is currently running 10.7.3. I have had numerous failed attempts to update to 10.7.4. Everytime I try and run the updater or installer it says the download is corrupt and to try downloading it again. I've tried u
-
Delivery and Invoice Number Plant wise
Hi Friends I have one Company Code Many Plant. Whenever i am creating the Delivery and Invoice, i should want different Numbering range of Delivery Number and Invoice Numbers. So that i can understand that these invoice raised from particular plants
-
I have 3 computers - a Mac, a Windows 7 computer, and a Windows XP computer. On the Windows XP computer, whenever I upgrade to the latest version of iTunes, I have to first uninstall all Apple programs and then dowload the latest version. Today i d