Background Batch Procesing for Settlement of Orders via Tcode KO8G

Hi Experts,
I am looking for document to explain the steps involved in creation of Background Batch Processing for Settlement of Orders through TCode KO8G.
In case no document may be available, can anybody pls explain the steps for the same.
Thanks in advance & Regards
Piyush Kothari

Hi,
- enter parameters or choose a variant for KO8G
- click F9 or choose program->execute in background (from menu bar)
- schedule job; choose immediate or a time to run
- check SM37, if job is finised
- go to SM35, process the job
Rgds.

Similar Messages

Standard report for settled internal orders

Hi All,
Is there any standard report available in Asset for settled internal orders.
We can able to see in S_ALR_87013019. But all Internal orders are appearing. I am not able to see settled orders. How to identify those... (Like flag color difference should be required for settled and open).
Thanx in advance.
Regs,
Bhaskar

Hi All,
Is there any standard report available in Asset for settled internal orders.
We can able to see in S_ALR_87013019. But all Internal orders are appearing. I am not able to see settled orders. How to identify those... (Like flag color difference should be required for settled and open).
Thanx in advance.
Regs,
Bhaskar

Batch determination for subcontract purchase order component.

Hello
Is it possible to do batch determination for the subcontract purchase order componet, then bring the component batch to the outbound delivery directly from purchase order? If no standard, any user exit or BADI... can do this also good for us.
Thanks
Hailiang

Hi
Yes I can manual input batch number, but I want the system select the batch in stock base on the batch classification. I can not find the batch determination function the the component detail screen.
Best Regards
Hailiang

Auto Batch Determination For Stock Transport Order/Replenishment Delivery

All,
I have an issue with my stock replenishment deliveries (STPO, Stock Transfer Plant to Plant via standard MRP/Procurement process with a Purchase Order that is a Stock Transport Order).
One question I have is what module should the configuration be for Auto Batch Determination on deliveries from STPO's, is it SD or MM? The reason I ask is because I have the SD side working just fine for example if I enter a customer order for this material and issue a delivery against it I get a batch automatically assigned according to your search/sort criteria. I know with a Stock Transport you have different item categories etc. and I have flagged them as relevant for ABD.
I have been racking my brain regarding this and I have went through the configuration for both Inventory Management and Sales and Distribution. I have went through the steps several times. I am not seeing what I am missing any help in this arena would be helpful I am getting the following error message when I go to the batch tab on the replenishment delivery "Batch determination is not possible because there is no search procedure". I am at a loss to what configuration is needed. I keep going through the steps and I am not finding whats missing. Any help in this area would be most grateful.
Thanks,
Jeremy

Hi Jeremy,
you need to configure batch determination in SD and maintain enteries in the trasaction code V/C5 as below
Sales org + Distribution channel + Division + DL (in salesDoc Ty) + Search procedure + tick check batch
Sales org + Distribution channel + Division + NL (in salesDoc Ty) + Search procedure + tick check batch
also check whether the delivery item category is active for auto. batch determination and maintain the batch condition record in transaction code VCH1
regards,
Santosh

Automatic batch determination for components in order confirmations

Hi all,
when I am doing confirmations through CO12, for some of the components the batch is picked up automatically. But for some other components, the batch is coming only when I manually select the component line and click on batch determination button below.
Why is this difference? How can I get the batch automatically with out selecting the line and clicking manually on the batch determination button?
Thanks in advance,
Raghu

Ravi,
Before posting please do search in this forum because this topic has been discussed many times in past.
Please check below links which could be helpful to you Automatic batch determination in process order
http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
If you still have issues then please come back.
Br
KK

Internal Batch Number for specific Production Order Type

HI PP Guru
We need to activate Internal Batch Numbers to a specific Production Order type.
We need this at order confirmation level. i.e. (CO11/CO12)
Is it possible? HOW ?
Please let me know customizing Steps.
If this is not possible then, Batch number should be internally assgisned at Order release stage. Please let me know customizaing steps for this even.
Thks.

hi Siva
Thk for suggestion
However, if we do not wish to activate Internal Batch Assigment and want to remain on manual BUT still we want system should not allow duplicate BATCH NUMBER, then, is there any way to achive this.
This is because, once we manually enter batch in confirmation (CO11), we further break the material in to several part and we need to understand original batch number. For this we just take the original batch number and add further serial number like below
Orinigal Confirmation Batch Number - 100001
Batch Split of 10 - 10000101,10000102,..............10000110.
So, what we want is system should check that same batch number is exist or not in confirmation. Is it possible or how it can be handle.
thk in adv.
SK

Report for Settled production orders

Hi All,
Is there a report I can use to show that these production orders are settled and these production orders need settlement. any clue on this. and when I ran the settlement does it chnages the production order status to reflect that it is settled ?
Thanks
MKR

Hi MKR,
Please go to COOIS,
Give the plant and give the status of the order that u want to ge the list.
then execute.
System will give you all the production Orders which are having the particular status.
Hope this will answer your query
Best Regards
Surya

Batch determination for stock transport order in po for delivery.

Dear All,
When I am creating a delivery in VL10D against a srock transport PO, while determining batches, i am getting an information message "batch determination is not possible because there is no search procedure".
How to configure so that , the batch should determine for making a delivery.
Quick responce will be highly appreciated.
Thanks & Regards
Prasant Sekhar

Hi,
I had the similar problem with one of the client and I could solve it.
The procedure is as follows:
1)goto spro->logistic general ->batch management->batch determination
2)Define condition table with proper selection of field .
3)Define access sequence which will consists of sequence of condition tables.
4)Define batch strategy and assign access sequence to it defined in step3.
5)Define batch search procedure and assign it to movement type 641 or 643.
6)Maintain batch search strategy condition record in tcode VCH1 with the combination u defined in access sequence.
7) Apply a USER-EXIT (MV50AFZ1) in the program - SAPMV50A as follows:
IF LIKP-VKORG = '0326' AND LIKP-LFART = 'ZNL' AND LIKP-KALSM_CH = ' '.
Select single KALSM into ikalsm
               from T683C
               where VKORG = likp-VKORG
               and VTWEG = '04'
               and SPART = '00'
               and AUART = ''.
               Likp-KALSM_CH = IKALSM.
ENDIF.
8) Once you create the delivery (VL10D) against PO, go to VL02N -> Batch Split -> Batch determination
You will find the batch will be splited into the delivery automatically.
Reward the point if feel relevant.
Regards,
Praveen Ghosh

Fill/upload data for the customizn order in Tcode SE09

Hello!
I have created a customizing order in SE09 and have to fill it with data from SAP Note (it is a .txt file).
After this this should be transported into the producitve Client
Which action are necessary for that?
Should I perhaps better implement the SAP Note?
Thank you very much indeed!
regards

Hello!
Thank you for your response!
<b>Is it aslo possible to create an customizing order in SE09 and to fill the data that is included into the SAP note (.zip-file --> unzipped it is a .txt-file)?</b>
Because this procedure is recommended in the SAP Note 898614
Thank you very much!
regards

Batch job for technically completing a production order

Is there a way I can run COHV in batch mode for TECO ing orders
thanks a lot

Hi
I assume you mean have a program run at pre-defined intervals to TECO your production orders.
Easiest is to use SM36 --> batch job creation wizard to setup your batch job.
The ABAP program you want to execute is PPIO_ENTRY (create a variant for the program first via SE38).
Rgds

PP : Need to find Multiple Batches for different production Orders

Hi Experts,
I have a requirement that, user wants to see the "Single batch assigned for multiple production orders and different materials"
Which its a off case, it cannot be done , but i have gone with 1. So user wants to know all the Orders which has same batch but for different materials & Orders.
Please help me in this regard.
Br,
SandeepCH

Hi Shri,
Please find the attachment for your better understanding.
Yes, as you said one material can have multiple batches, But that same batch cannot be linked with other material. This was my requirement.
So now i want to know all the batches which came in double for different materials.
Br,
SandeepCH

Problem when setting Reason of Rejection for a sales order using IDOC

Hi All,
I am working on a requirement where i need to put a reason for rejection as 'Item Cancelled' for a sales order via IDOC 'IDOC_INPUT_ORDCHG' in a third party scenerio where the PR is created automatically from the sales order . When the IDOC is run in the foreground I get the information message Subsequent function " 'Purchase requisition from sales document' not possible Item & was rejected "(Message V1579) and the IDOC results in a error when run in the background mode because of the same information message. The message should not appear when a sales order is being processed in the background but still the message is being displayed . Is there any way the message can be suppressed ? Thanks in Advance.
Regards,
Sowmya.

can you send the program how you create a so or po using IDOC, as i've a assignment creating PO using IDOC & then creating a sales order of the PO. and i dont know how to create a IDOC. SO IF you have sample program it would be help full
Thanxs

How to settle an order

Dear Consultants,
I have created an order in CO01...
I have done everything with that order.. the status of the order is DLV...
Kindly tell me how to settle the order...In detail..
Thank you all..
karthick

Dear,
You should follow following steps for Order Settlement after confirmation :
1. After Final Confirmation of Order ( Status : CNF) make GR for for order using Tcode : MIGO / MB31 so Production Order Status will be DLV.
2. Then complete the order technically by using Tcode : CO02--> Functions ( Menu)---> Restrict Processing -
> Technically Complete. You can carry out TECO for multiple Orders in Tcode : COHV (Mass Processing).
3.Now Calculate Overheads using Tcode : KGI2 - Individual Processing
CO43 - Collective Processing
4.Calculate WIP using Tcode : KKAX - Individual Processing
KKAO - Collective Processing
5.Calculate Variance by using Tcode : KKS2 - Individual Processing
KKS1 - Collective Processing
6.Finally do the settlement of Order in Tcode : KO88 - Individual Processing
CO88 - Collective Processing
Hope this helps.
Regards,
Tejas

What happens when we settle any maintenance order thru tcode k088 or ko8g

can any one tell in short what happens in background in fi AND CO when I settle any order/s thur ko8g and ko88.
I know that it balance out the value in fi and co or shows value in both modules but i what to know more on this

what is the difference between the two cost centers that we see while working in iw33.
one in tab additional data :- responsible cost center
one in location tab :- account assignment - cost center.
in distribution rule we have responsible cost center as settlement receiver.
can any one throw some light on this

Batch determination for STO

Hi,
How to configure batch determination for Stock transport orders?
I just wanted to know to which business process we need to assign the search procedure

Your first message:
Hi,
How to configure batch determination for Stock transport orders?
I just wanted to know to which business process we need to assign the search procedure
This was answered I think.
Your second message:
These settings are manitained. I have checked the lik you sent. I too get exactly the same error.
You didn't speak about any error message in your first message nor (explicitly) in the second one.
Regards,
Csaba

Background Batch Procesing for Settlement of Orders via Tcode KO8G

Similar Messages

Maybe you are looking for