Background installations?..

I have downloaded Safari 3.1 for Windows, and during installation I had ticked off check boxes that confirm additional installation of Bonjour and Apple Updates. But after installation I had found that this programs have been also installed, but I do not want them. After deleting Safari thise programs still installed on my machine. And I have found background process - mDNSResponder.exe (Bonjour).
How can I delete thise programs???
PS Sorry for my english...

Bonjour is a harmless program taken from apples bonjour info page.
Safari, Apple’s industry-leading browser, uses Bonjour to find any web pages on your local network. With the help of Bonjour, iChat lets you see which buddies are available for audio or video chats on your local network and removes them when they leave. iTunes and iPhoto use Bonjour to help you share music and photos on your local network. Bonjour is also the underlying technology behind Back to My Mac in .Mac and Remote Disc in MacBook Air
if you would like more info on it. see address below is harmless.
http://www.apple.com/support/downloads/bonjourforwindows.html
but if you would like to remove it since you removed safari you can do so in add remove programs.
Message was edited by: Aopen

Similar Messages

Re : Background Installation of BC Cubes

Hi,
can I install many cubes at a time in the background?. Can you please advise me on this.
can u give me for 1 BC Infocube 0SD_C03 How much time it will take to install, if i choose
before and afterwards grouping option.
Thanks
Subbu

Hi,
Quote: "SAP recommends you use the Install in background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete. Make sure that when you install objects in the background that the versions are not matched. It is always the delivery versions that are installed. These are not matched with any available customer versions."
To answer to your question "Why they recommend installing in background even though they don't support match option in background mode?"
background mode is a good option at the start of the project (start by using the standard version of the objects). Take the sap recommendations (do not install too many objects, used data flow before, then df after, not the two at the same time).
afterwords you will need to customize your objects (then, do not use background options again, because the system will not match the D version with your new and modified A version.
Hope it helps.

Error message in Report designer "Activate Default Theme: 0TRADESHOW"

Hi,
While working in Report Designer, I repeatedly get an error message saying "Activate Default Theme: 0TRADESHOW. See Note 1071338". After following the instructions and activating this theme, the problem still persists.
Anyone with a solution to this problem? We are running BI 7, package level 17.
Regards
Nils

Hi all,
I had the same issue and finally solved re-installing BC in BACKGROUND mode.
For unknown reason, my first istallation generate the a 0TRADESHOW entry with version D in table RSTHEMES.
Later attempts to re-install BC were not modifying this table.
Until I tryied Background Installation. It promped for overwriting current installation, I accepted and A version get generated.
best regards
Carlos Serrano

Brand new Surface Pro 3 with Office Prof Plus 2013

Just purchased today and brought home a brand new Surface Pro 3.
The first thing I needed for work, Office, and so I started to install, via USB DVD drive, the program Office Professional Plus 2013 - the fully loaded flagship version of Office that I purchased in March of 2014.
I was shocked that I am unable to install it. I first tried installing the 64-Bit Office version, since Windows 8.1 is 64-bit. Next I learned that I must uninstall the 32-bit trial versions of Office that came pre-loaded onto the Surface Pro 3. I even used
the Microsoft Office Fixit utilities and the Support descriptions of manual removal of previous versions of Office.Resetting the Surface Pro 3, uninstalling all Office products from it, and installing as 32-bit did not help either.
The errors I see are not describable, because nothing happens, the install just hangs with no messages. The machine keeps operating fine, but the Office installs do not work at all.
All of these efforts have only led to frustration.It appears to me that the flagship 2014 Surface Pro 3 and the Office Professional Plus 2013 (purchased only this Spring) are incompatible. This came as a great shock for me because in all my history of installing
current MS software on current systems, I have never had this problem. Maybe back in the days of Windows 3.1 it might have happened. Please, if anyone has any advice , please advise.

Thanks Melon Chen for your quick and helpful reply. Somehow (I will explain below), I was at last able to install the Office 2013 Pro Plus Suite.
Before I received your reply with detailed instructions I kept trying many other solutions .. eventually I made Office 2013 Pro Plus install, although I'm not exactly sure what ended up fixing my ability to install from DVD.
here's what I did:
1) I attempted to install Office 2013 Pro Plus after running Fixit Utility and again the clean boot, but those did not help. I received the same error message that I described (ie. no specific error coded message, only a message that Office 2013 Pro
Plus failed to install. After rebooting with the "clean" reset option , I noticed there was some of my personal setup information retained on the system (can't recall exactly what this was , but it was clear to me that the reset
did not make my system in pristine factory image). I discovered an even cleaner reset is the following to reset the Surface Pro 3 'absolutely' to factory image using a downloaded factory recovery image that is available here:
-->
http://www.microsoft.com/surface/en-us/support/warranty-service-and-recovery/downloadablerecoveryimage?lc=1033
This also required creating a USB drive based install and this reset the Surface Pro 3 to factory condition as described here:
-->
https://www.microsoft.com/surface/en-us/support/warranty-service-and-recovery/usbrecovery
Now, after all this, regarding the Office Pro Plus 2013 install, 64-bit, it failed yet again, but one good thing was that the error message stated something different ie containing the text
" Background installation ran into a problem. ... We'll automatically resume...." . With this information, I explored the internet over the weekend and I found the following valuable site on the web:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-office_install/unable-to-install-office-2013-error-codes-30102-1/fde35d75-bddc-4dd6-bd0a-e01d07420f49
Although I did not observe the error codes (apparently, it is explained that MS has stopped showing many error codes) as depicted, but the symptoms were identical. And so reading the link, there was one user , Rohn007, who compiled a beautiful listing of this
problem of installing Office 2013 Pro with suggested solutions; lo and behold, the solution describing
multiple wireless devices seemed to solve the problem. In other words, by being a heavy MS early-adopter, during Office 2013 Pro Plus install, I had a couple of MS devices, like Lumia phone, pc, etc.. all linked to the same wireless router
during my attempts to install to the Surface Pro 3. I have only a single MSN user ID and password for all the devices. I could be wrong, but this situation with shared wireless apparently can mess up the installs of Office 2013 Pro Plus- but often it
is disguised and murky because no error codes are generated. By turning off all the wireless connections except for the one connecting to the Surface Pro 3, I was AT LAST ABLE TO INSTALL OFFICE 2013.
In the end, I installed Office 2013 32 bit, but I really wanted 64 bit. I will try now and uninstall everything again. and then go for the 64 bit version.
I was very worn out by this experience. A full 2 days trying to install a brand new Office 2013 onto the brand new Surface Pro 3 with Win 8.1 apparently all came down to the fact maybe that I had too many wireless connections going! In the end I am
happy that I can finally discover this beautiful piece of hardware, but I am a bit scared since I also would like to install Adobe CS4 from DVD drive and I am worried that I will again have much trouble. Do you have any suggestions when installing the Adobe
CS 4 Master Collection, are there suggested steps to take? I like the idea of running Event Viewer, do you think that cab be helpful during installs.

ERROR: -1639 INVALID COMMAND LINE ARGUMENT

Trying to install software for Shuffle that Santa brought and get this error messsage...
"Error: -1639 invalid command line argument. Consult the windows Installer SDK for detailed command line help."
Install stops at this point.
SOMEONE HELP... My kid is chomping at the bit !
Thanks.

Ok I'll do some more searching but I found something in the community forums.
APPSearch can not return this data into a property, so instead, for some unspeakable reason, returns a value of Null, follwed by another Null. This means that the property is created, and populated with two null characters. Bad news if the property also happens to be a PUBLIC property. All public properties are passed as part of the command line sent in a stream to the background installer process by the Execute Action. Since this stream now contains a double null value in a property, the stream is prematurely terminated. This creates an invalid command line, and thus the 1639 error.
This user solved it by using the MSi Cleanup installer util.
EDIT: A little more info...
This problem is almost impossible to detect through the MSI log files since our friends at Microsoft chose to limit the length of any line in the log. It is impossible to get a dump of the full command line that generates this error.
EDIT2:Note that error 1639 only ocurrs when the install package is run from removable media. When the package is run from local storage, the behavior is far more obtuse. The background install process, failing to receive a complete command line, is forced to run as if there had been no UI session, which in turn causes the APPSearch action to run again as if the install was running in silent mode. This causes re-evaluation of all properties a second time, destroying the feature selections made in the UI session, and also forcing the install to run under user credentials instead of elevated, even though AdminUser, ALLUSERS and Privleged properties are set. This is a very serious error that causes total failure of the installation.

Business Content Questions - Urgent

Can you please help me with the following questions...
1. I installed business content for CRM Sales Activities. I was also successful in loading transaction data. There is some master data that also needs to be loaded, but many of the master data datasources are not available when I checked RSA5 in the CRM system. How should I approach this problem?
   2. When installing business content, if "match (X) or copy" is selected and if we select background installation, will the system overwrite the objects or will it leave it in the existing version?
   3. When activating business content reports, I get the error "BEx transport request xx is not suitable or not available". What could this mean?
   4. After development, do I simply gather all the objects and transport them to QA/PRD or do I have to activate business content in QA/PRD systems also?
Thank You.

Hi,
1.The datasources are:
Opportunity - 0CRM_OPPT_H - Opportunities header
0CRM_OPPT_I - Opportunities Items
Activities - 0CRM_SALES_ACT_1 - Activities
Master data -
0CRM_OPPT_CYCLE_TEXT
0CRM_OPPT_PHASE_TEXT
0CRM_OPPT_TYPE_TEXT
Business Partner
0CRM_BPART_ATTR
0CRM_BPART_TEXT
Products
0CRM_PRODSL_ATTR
0CRM_PROD_ATTR
0CRM_PROD_HIER
0CRM_PROD_IDCMP_TEXT
0CRM_PROD_TEXT
0CRM_PROD_TYPE_TEXT
This is not complete list.
2.Please chk this links:
Re: Confused on Install Business Content
http://help.sap.com/saphelp_sem40bw/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
Re: Match (or) Copy
About Match(X) or Copy in BC
http://help.sap.com/saphelp_bw33/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
3.Try to get the authorizations if you are transporting from dev to quality or dev to prod.
pls chk whether you stored in $tmp package.
4. yes,you can transport from development ---> Quality --.>production system for the activated business content objects .
Regards
CSM Reddy

Change of the source system

Hi
all
Background installation from SAP r/3 was already done and the system is up and running.
Now i would like to replace the SAP R/3 with ECC version , where I must replicate the same extractor now with obviously a different version of ECC.
I wonder if the source system change will effect the similar infoobjects which were already installed and assigned to a different source system.
Please explain me the effect and defects, or if any changes on the master data already existing.
thanks

When you change the source system - all your transfer rules , data sources etc will be gone and you will have to do them again.
The master data and transacton data will not be affected only that you will have to init the same again and deltas subsequently...
You could instead - keep the old system connection alive and then create a new set of transfer rules , data sources etc for the new system - that way you can have the old Transfer rules , data sources active and then have the coding done the for same alive for reference as well..

How to stop adobe updater from wanting to update

hi i have adobe reader and it keeps poping up i don't need updates for it what i have is fine to open my pdf files can anyone help with how to disable the updater from ever poping up in my tray

If you are on a Mac I have a solution for you. If you have a Mac you don't need Acrobat, it's just slow extra weight trash. But sometime uninstalling can leave behind updater crap thats no better than a virus, shame on you Adobe.
Launch Terminal.app (you can use spotlight and type terminal)
Type: sudo nano /etc/hosts
Enter your OSX password when promoted
add a line in this file: 127.0.0.1 armmf.adobe.com
press <control + x> and save the file
What's this do?
Adobe some how has some weekly background installer that contacts the URL armmf.adobe.com and downloads update software and then prompts you to install it or cancel, never a "don't remind me" option. So this just simply blocks any request from your computer to this one URL. If the updater can't call home then it can't bother you with a useless update it couldn't find. Simple.
The hidden updater will still run and try to call home from time to time and I think someday Adobe should be sued with anti trust violations, but thats another day.

Activation Business Content end Incomplete

Hi All,
I tried activating a standard cube, using data flow before and installing it background, when completed I noticed the particular infocube is greyed out nit installed and M version is different from A version. I have checked on the source system assignment its ok.
Please advise
Thanks
Nathan

Hi,
It is always better to Install the Business Content With option Install, as background installation cannot be traced where exactly it has gone for Short dump or where exactly the process failed.
The dependent Info Objects to be Activated / Installed for Info Cube with all required Routines with Transfer Rules/Update Rules / Info Sources for Cube.
Try to Group all necessary objects with Install option, and monitor the Business Content (Better to choose Transfer objects manually instead of choosing Transfer all without dialogue )
Hope it helps and Clear.

Error "Updating Respository" from MDM 5.5 to MDM 7.1

Hi all,
We have been using MDM 5.5 SP 6 for the last 2 years; right now we have a Sandbox environment (MDM 7.1 - 7.1.02.59) to check compatibility with our developments.
We unarchive the repositories in Sandbox and "Update Repository" for each one, 4 of our 7 repositories works without problem in this option, but 3 of them display the message "Error Updating Database Schema", we cant find any logs where describes the step that is trying to do.
Does anybody know which can be the problem?
To explain more of the background installations:
- MDM 5.5 is working with SQL 2005
- MDM 7.1 is working with SQL 2005
- The username that we use to Update all repositories is the same, so it's not a problem of authorization
Thanks for your help.

Hello,
The log you have mentioned is the complete log or only a part of it.
This seems to be problem from MDM side.
I'm sure you have followed all the steps, still for my reference would appreciate if you could verify them
take a fresh archive of the repository from 5.5,
transfer it in the Archive folder in the MDM Distribution folder
un-archive in the Console.
Update the repository (This where the error is ??)
Load the repository using updated indices
It will be helpful if you raise it with SAP an OSS message.
Regards,
Abhishek

What was installed?

I was looking at a first tab on ultimateguitar.com (on Firefox mobile on my nexus 4) when I saw the gray message box appear briefly at the bottom of my screen, telling me "installation complete". I'm wondering what was installed? the site apparently has an app but I didn't accept any installation and no new apps appear to be on my phone. I've also check Firefox for new add ons - none. Could this have just been a background installation of an update to an app I already have?

also, the reason I suspect something to do with Firefox is that this gray box doesn't appear when installing apps from the Google Play market and does appear when installing add ons for Firefox.

Installation Locked error while uploading meter readings in background

Hi,
Following is the process followed:-
Execute EL35 transaction to generate MRO Print in SAP ISU.
at back end a Meter readings are fetched from a data server and uploaded in the sap isu using BAPI BAPI_MTRREADDOC_UPLOAD as a background process after a propogation delay of a minute.
If the el35 requesting is closed the meter readings get uploaded.
However if the transaction is kept open then we get an error that installation is locked.
Please advice if there is a way to dequeue this lock while trigerring the EL35 transaction in first place..
Regards,
Sarvesh
<Removed contact details>
Edited by: Suhas Saha on Jul 25, 2011 11:24 AM

Hi,
Message - 'Format of MR 17737 not valid (MR document number 105677 ) signifies that number of pre-decimal places and number of post decimal places do not match with your register group configuration.
Since, you are suggesting that your logic works in most of the cases, I think when meter overflow happens and while you are converting it to actual read - this reading do not match with pre-decimal and post decimal places.
You need to double click on register group for a device, where you are facing this issue and then compare your calculated read in your code.
Hope this helps.
Regards,
Avinash

Cannot upgrade on Win2k to iTunes 6 - Installer is frozen in background

Hi,
When I start the iTunes installer, it comes up, announces its starting to install, and then moves to the background and does nothing.
As I write this, its been sitting there for over 4 hours on this attempt alone. Other attempts have had similar results. I have already done the following:
-Uninstalled the previous iTunes
-Uninstalled Quicktime
-Upgraded the InstallSHield App
-Updated the DCOM permissions to include myself and "Everyone" as well
-Turned off all virus software
-Tried installing QuickTime separately (didnt' work)
-Cleaned out all TEMP files (multiple times).
-Rebooted several times during various combinations of the above
Anyone have any ideas what it will take to make this work?
Thanks,
-T
Thinkpad T40 Windows 2000

Thanks for the suggestion, but that doesn't work. The stand-alone version of QT doesn't work any better than the bundled one. It never gets to the part of the operation which even asks for a location.
Now, I have the QT installer frozen in the background just like what happens with iTunes.
Thanks, and keep the ideas coming.
-T
Thinkpad T40 Windows 2000

Can Installer Wizard background(graphics) be customized?

Is it possible to customize background of the installer wizard.
Here, installler means the installer created by Build Application utility.
and background means pictures and graphics.

Hi,
You can try that using open G builder tool kit. Here is the link.
http://www.openg.org/index.php?option=com_content&task=category&sectionid=4&id=68&Itemid=47

Installation window (black background) consistently freezes solid at either 25% or 30% progress. Have tried all suggested means of sorting this (including uninstalling) several times. No joy. OS 10.10.2 Yosemite version. Any suggestions?

Installation window (black background) consistently freezes solid at either 25% or 30% progress. Have tried all suggested means of sorting this (including uninstalling) several times. No joy. OS 10.10.2 Yosemite version. Any suggestions?

I just found this....and it works....and it's legit.
1.     Reboot computer or use Activity Monitor to force quit any prior Adobe Flash installation process that may be still running
2.     Download Adobe Flash update using this link (assuming you are using Safari or Firefox): Flash Player for Safari and Firefox - NPAPI
3.     Mount flash player by clicking on flash drive icon on desktop
4.     Right click on Flash file
5.     Choose 'Show Package Contents'
6.     Open 'Contents' then 'Resources'
7.     Run file 'Adobe Flash Player.pkg'
8.     Reboot computer.

Background installations?..

Similar Messages

Maybe you are looking for