BackGround Job for Transaction VF06

Hi Experts,
We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
Allthough running this transaction Manually creates Invoice with same variant.
Kindly help me on this.
Thanks and Regards,
Neha Kapoor

Hi,
I have the seen the Log it tells:
Date       Time     Message text                                                                 Message class Message no. Message type
29.06.2008 22:00:48 Job started                                                                       00           516          S
29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH)      00           550          S
29.06.2008 22:00:48 Job finished                                                                      00           517          S
But Invoices are not getting created.
Thanks and Regards,
Neha Kapoor

Similar Messages

Is there a possibility create background jobs for transaction SP01?

We are creating spool requests (status 'to be processed') for specific printers that are located in different time zones. We want to schedule print jobs by printer to make sure the prints come out at a time the user specifies to us. I am looking for a program with the possibility to make variants by printer that I can include in a job to be created via SM36.Looking forward to your suggestions!
kind regards
Angelique Heutinck

Hi,
Check this link It may help you.
https://forums.sdn.sap.com/click.jspa?searchID=4305151&messageID=2622788
Thanks.

How to create a background job for call transaction

hi gurus
can any one suggest me
how to create the background job for call transaction.
thank you
regards
kals.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926107&messageID=889652
Regards
Kiran Sure

Schedule Background job using transaction CATM

Hi all,
Since we cannot schedule a background job using transaction CATM, I have created a program calling the CATM transaction through batch-input.
I have done a recording and entered the coding in a Z-program. For a vendor, I have recorded time in CAT2 for multiple purchase orders.
After entering the vendor number in CATM, all the purchase orders showed up. I have clicked 'select all' and posted.
When I run the program in the background, it posts only for one purchase order.
When I run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
How to read the whole stack and post the whole stack of purchase orders?
Please help me out with this.
Thanks
Regards
Srinivasan Desingh
408 368 3837

Hi,
When I run the program in the background, it posts only for one purchase order.
When I run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
See..it's a Z-program so Its difficult to answer without checking the program. But I think, you should check your BDC again from Debugging, with the help of your abaper. You will find, why its is processing only one entry.
Regards
Shishir

Why the background job for downloading file failed?

I have a background job for downloading file with logical path.
with
'OPEN DATASET l_out_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT';
Now, the program can be run in foreground;but when it running on background, it shows 'open file error'.
I do not know what happen?
Please help ~~

Hi,
The logical path you have provided might be incorrect or you might not have the necessary authorization to read/write on that folder.
Please check the folder in transaction AL11 & check whether you have the authorization to read/write. BASIS consultant would be able to tell you about it.
Best regards,
Prashant

Program works but background job for that program fails....

I have a requirement where I have to collect the details of the purchase order and put the details in XML file format and FTP the XML file to an external third party FTP Server.
To realize this I developed a report program which follows following logic.
1)     First I collected the PO details by calling the BAPI BAPI_PO_GETDETAIL1.
2)     Then using the following link "/people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I converted these PO details to the XML file format that the third party people accept.
       In the code I used u201CCALL METHOD cl_gui_frontend_services=>gui_downloadu201D and in this process first the XML file is generated and is getting stored on my deskytop.
3)     Then I called HTTP_SCRAMBLE, FTP_CONNECT, FTP_COMMAND , FTP_DISCONNECT and RFC_CONNECTION_CLOSE.
This works perfectly well and each time I execute the report the file is getting FTPu2019ed to the third party FTP server.
Now I tried to schedule a batch job for this and the batch job fails with follwing errors
02/25/2009 15:08:47 Error in Control Framework
Message Class = FES
Message Number = 022
Message Type   = E
02/25/2009 15:08:47 Job cancelled after system exception ERROR_MESSAGE
Message Class = 00
Message Number = 564
Message Type   = A
Can some one tell me what is going wrong. My report works perfect in front end but fails if I try to schedule a background job for it in SM36.
Can you please tell me whatz going wrong with batch job? Any Help is highly appreciated.
Regards,
JEssica SAm

Robert...Thanks for the reply...
I am using follwing code
l_xml_size = l_ostream->get_num_written_raw( ).
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        bin_filesize = l_xml_size
        filename     = FILEPATH
        filetype     = 'BIN'
      CHANGING
        data_tab     = l_xml_table
      EXCEPTIONS
        OTHERS       = 24.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Now what changes should i make..where should i store my XML file then instead of my desktop?
and whih Function Module should i Use..

Can ABAP proxy to consume WSDL file be run as background job for every10min

Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1)     Should I create a web service or should I consume a web service?
2)     If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3)     Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.

There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
       num   type i,
       end   of ty_data.
DATA: itab TYPE standard table of ty_Data,
      la_data like line of itab,
      xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
    <table>
      <tt:loop ref=".table">
        <item>
          <tt:value ref="NUM"/>
        </item>
      </tt:loop>
    </table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel

Error in Schedule Background Job for Deadline Monitoring of swu3

While Auto Customization swu3 i am getting error message 'Output device "" not known' in 'Schedule Background Job for Deadline Monitoring'
Please advice what could be cause of it

the earlier problem of background job was solved by changing the output device assigned to user wf-batch .
regarding the transport request :
when i was trying to execute the step : "Schedule bakgrd for missed deadlines " MANUEL it was giving me an option of SAVE AND SCHEDULE . which was creating the transport request . but when i executed it automatically it worked fine without asking a request to me ... i don't know why )-: ... probablly we can specify a different interval then the standard of three minutes and which will be transported (it's just a guess) . i have executed it automatically ...
well thanks all for u r help

Schedule a background job for a program using ABAP code.

Hi,
I have to write a program to schedule a background job for another program.
Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
Need it urgently.
Thanks in advance.
Sandeep.

Hi Sandeep,
Here is the demo program regarding the BDC For the background job.
report zprprbdc1
       no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
***    DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
*   If it is nessesary to change the data section use the rules:
*   1.) Each definition of a field exists of two lines
*   2.) The first line shows exactly the comment
*       '* data element: ' followed with the data element
*       which describes the field.
*       If you don't have a data element use the
*       comment without a data element name
*   3.) The second line shows the fieldname of the
*       structure, the fieldname must consist of
*       a fieldname and optional the character '_' and
*       three numbers and the field length in brackets
*   4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
***data: begin of itab occurs 0 ,
***       matnr(20) type c,
***       mbrsh(30) type c,
***       mtart(30) type c,
***       kzsel(20) type c,
***       maktx(40) type c,
***       meins(5) type c,
***       end of itab.
data: begin of record occurs 0,
* data element: MATNR
        matnr_001(018),
* data element: MBRSH
        mbrsh_002(001),
* data element: MTART
        mtart_003(004),
* data element: XFELD
        kzsel_01_004(001),
* data element: MAKTX
        maktx_005(040),
* data element: MEINS
        meins_006(003),
* data element: MTPOS_MARA
        mtpos_mara_007(004),
      end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
**do.
**read dataset dataset into record.
**if sy-subrc <> 0. exit. endif.
call function 'GUI_UPLOAD'
exporting
    filename                      = 'c:\jitu\bdc\10002.txt'
   filetype                      = 'ASC'
   has_field_separator           = 'x'
*   HEADER_LENGTH                 = 0
*   READ_BY_LINE                  = 'X'
*   DAT_MODE                      = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   CHECK_BOM                     = ' '
*   VIRUS_SCAN_PROFILE            =
*   NO_AUTH_CHECK                 = ' '
* IMPORTING
*   FILELENGTH                    =
*   HEADER                        =
tables
    data_tab                      = record
* EXCEPTIONS
*   FILE_OPEN_ERROR               = 1
*   FILE_READ_ERROR               = 2
*   NO_BATCH                      = 3
*   GUI_REFUSE_FILETRANSFER       = 4
*   INVALID_TYPE                  = 5
*   NO_AUTHORITY                  = 6
*   UNKNOWN_ERROR                 = 7
*   BAD_DATA_FORMAT               = 8
*   HEADER_NOT_ALLOWED            = 9
*   SEPARATOR_NOT_ALLOWED         = 10
*   HEADER_TOO_LONG               = 11
*   UNKNOWN_DP_ERROR              = 12
*   ACCESS_DENIED                 = 13
*   DP_OUT_OF_MEMORY              = 14
*   DISK_FULL                     = 15
*   DP_TIMEOUT                    = 16
*   OTHERS                        = 17
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at record .
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-matnr_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-mbrsh_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-mtart_003.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-kzsel_01_004.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-maktx_005.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-MEINS'.
perform bdc_field       using 'MARA-MEINS'
                              record-meins_006.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              record-mtpos_mara_007.
perform bdc_transaction using 'MM01'.
**enddo.
endloop.
perform close_group.
*perform close_dataset using dataset.
&*****************Reward point if helpful************&

How to schedule a job for transaction CG36, incl. variant?

Hi all,
When you enter transaction CG36, you need to select a User Exist (EHS_DXSDB). After that you need to define a file path.
I would like to schedule a job for transaction: CG36 > Define User Exit: EHS_DXSDB (Import Dok-X material Safety Data Sheets) > and define a path. With transaction SE93, I found program name: RC1RIMPS (program is allowed to be job scheduled), only I can't create a Variant (to define the user exit and file path, no selectionscreen), how to create a variant?
The following programs can't be scheduled either (as they are not of type 1 or J):
SAPLC131
SAPLC1EO
SAPLC3G
Thank you in advance!
Kind regards,
Roy Derks

Hello Roy
I am sorry. To my knowledge up to ECC 6.0 Enhancement Pack 4 there is no SAP EH&S process available there you can do what you are requesting. The "problem" is that you need to "answer" the user dialog. Therefore you can not generate/prepare a variant which could be processed as a job according to my knowledge.
Therefore in my opinion you have this option only: prepare a copy of the transaction (or only the report) using either "Z" or "Y (customer reports). Then you need to exclude some line in the code (which gives rise to the user dialog) and prepare some customer specific coding so that the resulting report can be used in such a way that a variant is possible, but you must make sure that the process later (the real upload process) is processed too in this "job" queue. IN any case: you need to check the log of the report and this must be done by an user. Therefore an automatic process does have some "risks"
The topic of import of reports is used in most cases during a set up of EH&S, because of mergers/acustions but not in the daily work with EH&S and there I believe that SAP does not support this demand.
With best regards
C.B.

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

How to deactivate *Schedule Background Job for Work Items with Errors* SWU3

Hello Guys,
Can any one tell me how do I DEACTIVATE Schedule Background Job for Work Items with Errors in sap workflow SWU3.
Currently it is green which I don't want. I want to stop this service.
Regards
NK

Hello,
You could also just stop the job in tx SM37.
But why would you want to do this? As a test?
regards
Rick Bakker
hanabi technology

How to create Background job for Dialog program

Hi Experts,
I have copied Standard tcode to Z-tcode (CS12 tcode).
Now my requirement is to create background job for this program (but program is not a 'E' type its 'I').
How we can schedule Dialog program to Background.
Pls suggest me.
Regards
SK

Hi do as below :
Reefer below :
Bakcground Job Creation
You will have to submit your report using Submit statement ,
then inside the submitted report write open_job.
Regards,
Uma

BPM - Background Job for Reorganization = Not Scheduled

Good afternoon, first of all thank you very much for the support they can provide. I have developed a JDBC interface -> BPM (Multimapping) which works well. Modify a Message Mapping in the BPM that I use for an RFC Lookup, I have added the Configurable Parameters in the BPM and Integration Directory and everything works fine at design time. But when running the interface at run time the message reaches the BPM and the error "error in BPE inbound Permanent processing".
I have reviewed the Business Process Engine in the RWB and the item is Red Schedule Background Job for Reorganization and detail reads: "Background Job for Reorganization = Not Scheduled".
As I can solve this problem. Thank you very much.

Re: Importing trans request failed
Re: Transports Erroring
Re: What is RDDIMPDP .....
have a look it may help you
Message was edited by:
Vinod Udapudi
Message was edited by:
Vinod Udapudi

Automatic workflow customizing :Schedule background job for condition evalu

Hai,
I have one problem in automatic customizing SWU3(Maintain runtime environment)-Schedule background job for condition evaluation.
How to turn green tick from red cross? All other steps are OK in SWU3 except this problem.
Please give me some tips.
-Jaheer
_______Thanks in terms of BIG points_______________________

Hi Jaheer
If the only red cross is next to the condition evaluation job, I suppose you could just schedule up the job automatically in SM36. Just be sure that the RFC Destination is correctly configured.
The program that you need to schedule is <b>RSWWCOND</b>. The SAP default is to call the job SWWCOND and schedule it to run every 30min. That should get rid of the red cross. And if not, you might find along the way why the Auto-Customising didn't work.
Cheers
Lyal

BackGround Job for Transaction VF06

Similar Messages

Maybe you are looking for