Background Job hangs!
Hello Friends,
I am encountering a problem with background jobs which has driven me crazy.
The background job hangs and when I try to debug it using the JDBG command the results are surprising.
When the program control reaches a particular PERFROM statement, then no matter what command I give (F5, F6 or if I double click on any of the variables) it hangs. When I press F5, it should atleast go in to the corresponding FORM, and hang during some processing or it should go into an infinite loop but this is not the case. The system hangs even when I press F5 on the PERFORM. The FORM routine exists in the program, so that possibility is ruled out.
Actually the job processes records of a custom table, this problem starts with a particular record and if I skip the processing of this record then it happens with almost all the records after this one. Also, this does not happen every time the job is run, but whenever it does, it starts with a particular record.
When the system hangs then even if I try to stop the transaction by right clicking on the task bar then it has no effect, the only way to close the session is by using the 'Windows task manager'.
I tried transaction SM50, but there were no changes on that screen for this particular session indicating that it has hanged.
Please let me know if you require any more information.
Thanks and Regards,
Haseeb.
Hi,
Debug it in Sm66.
kishore.
Similar Messages
-
Background job hanging reasons
background job hanging reasons
Could you provide little more detail of the issue you encountering.
One of the reason could be 100% utilization of the CPU, all your background process might being used in parallel.
Check the load in the transaction st03n
To prevent this you may want to use load balancing on various application servers using the transaction smlg.
You may also want to define a flow of the the jobs, like job B should start after job A has completed.
Let us know more details of the environment to allow us to help you better
Thanks & Regards
Abhinav -
Background Job Hanged but no work process assigned
Hi,
Background job has hanged When i see in SM37. But no work process assigned to this job. All work process are waiting status.
What could be the reason. What is the resolution process.
Thanks,
DayakarHow did you come to a conclusion that the bg job is hangend.
What is the status of the job. ? I guess Job defined, but not yet eligible to run even if the start condition has been fulfilled so it should be in Scheduled status. -
Hi.
We create sales orders via EDI. When certain sales orders are created, we execute user exists on the Sales Order save. During the User Exit, we submit/create (job_open_adk function, the submit command, and the job_close_adk function) a background job.
The background, is created and executed successfully, but we get 2
short dumps everytime.
The short dump is:
DYNPRO_SEND_IN_BACKGROUND
The description is:
Screen output without connection to user.
The short dump is for the user WF-BATCH.
I've used DEBUG and the shortdump occurs on the submit command.
submit zsd
to sap-spool
destination 'null'
immediately ''
keep in spool 'X'
without spool dynpro
and return
user l_user via job tbtcjob-jobname
number tbtcjob-jobcount
with p_vbeln = l_order
with p_ebeln = l_po
with p_uname = l_user.
Nothing should be displayed on the screen.
I used 'without spool dynpro' to prevent the 'Print Screen List' window
from appearing.
I've put this code into a TEST program. I ran the test program
myself. (under my ID) The program run perfectly. No
shortdump.
Similar code is used in other programs and it works perfectly - no shortdumps.
The short dump occurs when we use ALE/EDI to create a sales order.
The short dump has the ID WF-BATCH on it.
I'm guessing the problem is with the WF-BATCH ID. Are printer setting
missing on a Work Flow ID?
Any ideas why the 'without spool dynpro' parameter doesn't work for the
WF-BATCH ID?
I've tried searching OSS and I looked at the on-line help/documentation
on Submit. I saw a recommentation to use the
fuction 'GET_PRINT_PARAMETERS' to set all of the print parameters. I
tried this, but still got the short dumps.
Any suggestion on how I can run the Submit command and not get a short dump?
thanks,
MichelleHi,
Try this notes:
0100915 RSBDCREO: System hangs or parameters not effective
0377038 HR-CA-ALE: DYNPRO_SEND_IN_BACKGROUND for HR doc. d
0105165 Dump "DYNPRO_SEND_IN_BACKGROUND" in prog.SAPMSSY0
0169303 Warning messages displayed for settlement mass pro
0428489 VL10: Dump 'DYNPRO_SEND_IN_BACKGROUND' with backgr
[[http://forums.sdn.sap.com/thread.jspa?threadID=14875|http://forums.sdn.sap.com/thread.jspa?threadID=14875]]
Regards
HM -
Scheduled TMS_ # TMS_TP_IMPORT background jobs fail with error code 0232
Is anyone else having the problem we've just encountered since upgrading to ECC 6.0 and CRM 2007, where once setting up the automatic import ALL background jobs, to have all of the Transport Change Requests imported into the Q-Prod testing systems automatically, fail after several successful runs?
After setting up the automatic import background job to run every 15 minutes, the first few run successfully (importing any transports as it should), then the transports stop being imported.
The background jobs continue to run, but have the following in the job log overviews CRM 2007 - "Could not start transport control program tp". R\3 ECC 6.0 - "Transport control program tp ended with error code 0232".
Only by deleting the background job and recreating it (or manually importing) from STMS, can the transports continue to be imported. Although I have noticed that there are multiple tp.exe processes started, which need to be deleted before the STMS and TMS Background jobs work again.
The:
DB is SQL Server 2005
disp+work is at version 7000.150.14.48855
R3Trans is at version 7000.149.14.47907
tp is at version 7000.144.14.39594
Any suggestions on how to cure this for good?Thanks All
FYI
SAP first suggested the following notes: 19466, 1150361, and to add a Startup profile parameter rfc/use_gwstart = 1. Which was only partially successful.
I guess it had more to do with RFC processes hanging than it did with the tp, which was fixed in a later kernel patch level.
I've upgraded the kernel to the latest (70000.181.0.0) and my problem was fixed.
Ken -
Problems creating background job for program (job open, submit and close)
Hi gurus,
im trying to start a background job using the FM BP_START_DATE_EDITOR to show the start date to the job or if it's imediate. this FM it's working fine, after call it im opening a job, submiting it and call the job close FM and the job close FM creates me the job.
The problem it's when i go to the sm37 to see the job status the job has been canceled, and the job log says that i have to give a start date to the job.
What i dont understand it's either the job is imediate or i choose a date to start the job always gives me this error...
Below goes my code,
any ideas will be rewarded
CLEAR: stdt_modify_type, stdt_output.
CALL FUNCTION 'BP_START_DATE_EDITOR'
EXPORTING
stdt_dialog = 'Y'
stdt_input = stdt_input
stdt_opcode = 14
IMPORTING
stdt_modify_type = stdt_modify_type
stdt_output = stdt_output
EXCEPTIONS
fcal_id_not_defined = 1
incomplete_last_startdate = 2
incomplete_startdate = 3
invalid_dialog_type = 4
invalid_eventid = 5
invalid_opcode = 6
invalid_opmode_name = 7
invalid_periodbehaviour = 8
invalid_predecessor_jobname = 9
last_startdate_in_the_past = 10
no_period_data_given = 11
no_startdate_given = 12
period_and_predjob_no_way = 13
period_too_small_for_limit = 14
predecessor_jobname_not_unique = 15
startdate_interval_too_large = 16
startdate_in_the_past = 17
startdate_is_a_holiday = 18
startdate_out_of_fcal_range = 19
stdt_before_holiday_in_past = 20
unknown_fcal_error_occured = 21
no_workday_nr_given = 22
invalid_workday_countdir = 23
invalid_workday_nr = 24
notbefore_stdt_missing = 25
workday_starttime_missing = 26
no_eventid_given = 27
OTHERS = 28.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
MOVE 'X' TO gv_flag.
ENDIF.
DATA jobname LIKE tbtcjob-jobname.
DATA jobcount LIKE tbtcjob-jobcount.
DATA job_release LIKE btch0000-char1.
DATA job_imediate TYPE c.
CLEAR: jobname, jobcount, job_release.
CONCATENATE 'MAPAEXEC' sy-uname sy-datum
INTO jobname SEPARATED BY space.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i003(zmapas).
EXIT.
ENDIF.
SUBMIT z_mapa_execucao_orcamental
VIA JOB jobname NUMBER jobcount
WITH ano EQ ano
WITH so_perio IN so_perio
WITH so_date IN so_date
WITH so_org EQ so_org
WITH so_num IN so_num
AND RETURN.
IF stdt_output-startdttyp EQ 'I'.
CLEAR job_imediate.
job_imediate = 'X'.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
calendar_id = stdt_output-calendarid
event_id = stdt_output-eventid
event_param = stdt_output-eventparm
event_periodic = stdt_output-periodic "?
jobcount = jobcount
jobname = jobname
laststrtdt = stdt_output-laststrtdt
laststrttm = stdt_output-laststrttm
prddays = stdt_output-prddays "??
prdhours = stdt_output-prdhours "?
prdmins = stdt_output-prdmins "??
prdmonths = stdt_output-prdmonths
prdweeks = stdt_output-prdweeks "?
predjob_checkstat = stdt_output-checkstat
pred_jobcount = stdt_output-predjobcnt
pred_jobname = stdt_output-predjob
sdlstrtdt = stdt_output-sdlstrtdt
sdlstrttm = stdt_output-sdlstrttm
strtimmed = job_imediate
targetsystem = stdt_output-instname
start_on_workday_not_before = stdt_output-notbefore
start_on_workday_nr = stdt_output-wdayno
workday_count_direction = stdt_output-wdaycdir
IMPORTING
job_was_released = job_release
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE i003(zmapas).
EXIT.
ELSE.
MESSAGE i004(zmapas) WITH jobname.
ENDIF.
Thanks in advance,
Best Regards
João MartinsHello João.
In debug mode, check the value of variables you passed to parameters sdlstrtdt and sdlstrttm.
As aditional info, I usually achieve your goal without FM BP_START_DATE_EDITOR.
Check this code:
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = w_jobname
IMPORTING
jobcount = w_jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
CHECK sy-subrc = 0.
CLEAR seltab_wa.
MOVE: t_jobs-param TO seltab_wa-selname,
t_processar-line+34 TO seltab_wa-low.
APPEND seltab_wa TO seltab.
seltab_wa-selname = 'P_LOJA'.
seltab_wa-low = t_processar-ficheiro+7(4).
APPEND seltab_wa TO seltab.
*** Submete o programa para o JOB
SUBMIT (t_jobs-repid)
WITH SELECTION-TABLE seltab
USER sy-uname
VIA JOB w_jobname NUMBER w_jobcount
AND RETURN.
*** Encerra o JOB
l_hora = sy-uzeit.
ADD 60 TO l_hora.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = w_jobcount
jobname = w_jobname
sdlstrtdt = sy-datum
sdlstrttm = l_hora
targetserver = w_servidor
IMPORTING
job_was_released = l_liberado
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
Regards.
Valter Oliveira. -
Scheduling one background job inside another
Hi All,
Is it possible to Scheduling one background job inside another.? i.e In my Z program I am calling job_open, job_submit, job_close and to execute one standard report in background. And after that I am executing my Z program itself from SE38 as Program->Execute->Background->Execute Immediately. Is this logically correct? I am asking this because I am not getting the desired result
Thanks & Regards,
Neethu.HI,
Check the job steps in SM36.
First schedule the Standard job and in the job steps schedule the z report.
Schedule job in chain -
Hi, I am calling a Background job in my program. I am using JOB_OPEN, JOB_SUBMIT and JOB_CLOSE FM to start a job. My need is to pass a value to the job program(job program doesnt have any selection screen values). Is their any way without creating variants each time to pass value to it.
Please advice.....Hello,
You can first use JOB_OPEN which returns job number. Then build ranges or parameters to use SUBMIT to call the program.
Eg: SUBMIT RM06BB20 AND RETURN
WITH S_EKGRP IN R_EKGRP
WITH S_EKORG IN R_EKORG
WITH S_FLIEF IN R_FLIEF
WITH S_KONNR IN R_KONNR
USER sy-uname VIA JOB w_jobname
NUMBER w_job_number.
Now use JOB_CLOSE.
Thanks,
Venu -
How can i get Background Jobs list which is made me?
I created background job using JOB_OPEN and SUBMIT and JOB_CLOSE.
I need to Background Job list which is made me..
Do u know any function or logic?
plz~[BP_JOBVARIANT_OVERVIEW|http://help.sap.com/saphelp_45b/helpdata/en/fa/096ccb543b11d1898e0000e8322d00/frameset.htm]
BP_JOBLOG_READ -
Submit RSEOUT00 as background job
Hi all,
Here is my requirement.There is a Z program from which RSEOUT00 program has to be called , so that it will change the Idoc status to '03'. I tried using Submit RSEOUT00..and return and also tried JOB_open and then SUBMIT rseout00 WITH docnum EQ p_idocno user sy-uname via job jobname number jobcount and return and then JOB_CLOSE .I checked SM37 also where i can see this job as finished..
I tried COMMIT WORK statement and also WAIT statement .
But still the idoc status wont change to '03' .
Can anyone plase advise on how to correct this .
Regards,
SudheerHi,
I have created background job for RSEOUT00 and written the below code. It worked.
DATA: w_number TYPE tbtcjob-jobcount,
w_name TYPE tbtcjob-jobname VALUE 'ZTEST_JOB'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = w_name
IMPORTING
jobcount = w_number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT rseout00 VIA JOB w_name NUMBER w_number AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = w_number
jobname = w_name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
Thanks,
Appanaboina -
Error while scheduling Background Job for User/Role Full Synchronization
Hi all,
We have installed RAR 5.3 Component and uploaded the authorization data & established the connectors to the backend system.
We have performed all the post installation activities and everything is complete.
When we have scheduled User -Full Synchronization with the Back End system as a part of Post Installation Activity we are receiving the below error message
"Error while executing the Job:Cannot assign an empty string to host variable 2."
Also the VIEW LOG/ Terminate Job buttons are disabled in this screen.
Can somebody please help us in resolving the above issue
Thanks and Best Regards,
Srihari.KHi,
We are copy pasting the error log (Part as it is huge) below here. We could able to do Full Synch for Roles and also for Profiles. Only for User Synch we are getting this error and none of the users are sychronized to RAR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WILSONA of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WINDC of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WLADICHJ of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WUK of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZENGS of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZHENGL of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: All System Flag:false=====Last Batch Flag:true
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis loadUserData
INFO: @@@ User sync completed for params true: Syskey List is [HL2-QAHR]
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob run
WARNING: *** Job Exception: Cannot assign an empty string to host variable 2.
com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 2.
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:57)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
at com.virsa.cscext.dao.CSCDAO.updateIgnoredUserData(CSCDAO.java:1388)
at com.virsa.cscext.dao.CSCDAO.populateGenObjUser(CSCDAO.java:1169)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.populateGenObj(BatchRiskAnalysis.java:868)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.insertBAPIUserData(BatchRiskAnalysis.java:142)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.loadUserData(BatchRiskAnalysis.java:390)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1275)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 13 Status: Error
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=13, status=2, message=Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>13----
Please let us know how to resolve this error
Thanks and Best Regards,
Srihari.K -
Internal error occurs in background job scheduling
Hi Experts,
We are facing an error message "Internal error occurs in background job scheduling" while trying to execute a custom report(Z report) in background in SA38.
Please find the following observation on our side on this message.
1) This message is not coming for only one report not for others.
2) SU53 screen shot shows that SE38 check is failed, but the weird thing is not happening for other report.
3) Persons having SE38 auhtorization are able to run this report.
Please advise.
Thanks in advance,
VivenWhat is the message ID and number? Have you tried OSS search and debugging?
What does this program do, in a nutshell? -
BWREMOTE background job canceled in sap r/3 system
Hi my friends,
Thanks for your help ahead.
Today I checked the background job in SAP R/3 created by BWREMOTE via SM37. It showed me some jobs had been canceled.
I displayed its log, the detail message is:
==========================================
Step 001 started (program SBIE0001, variant &0000000083494, user name BWREMOTE)
DATASOURCE = ZQM_NOT_SHFGRP
Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,593 records
Result of customer enhancement: 1,593 records
Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,593 records
ABAP/4 processor: SAPSQL_INVALID_FIELDNAME
Job cancelled
==========================================
Then I displayed the "Long Text" of the job log. It is
One of the field names in the SELECT clause was not recognized.
Error analysis
The SELECT clause was specified in an internal table at runtime.
It contains the field name "TPR00", but this does not occur in any of
the database tables listed in the FROM clause.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLXRSA " in
"EXIT_SAPLRSAP_001".
The main program was "SBIE0001 ".
Source code extract
008840 concatenate 'TPR'
008850 day_temp+6(2)
008860 ' = '
008870 ' ''' zshift '''' into
008880 cond .
008890 append cond to itab .
008900 select schkz into i_not_shfgrp-zzschkz from t552a
008910 where zeity = '2'
008920 and mofid = 'CN'
008930 and mosid = '28'
008940 and ( schkz = 'SFTA' or
008950 schkz = 'SFTB' or
008960 schkz = 'SFTC' or
008970 schkz = 'SFTD' )
008980 and kjahr = day_temp+0(4)
008990 and monat = day_temp+4(2)
> and (itab) .
009010 endselect.
I guess that there is not a field named TPR00 in table t552a.
Next, I opened the 'project management of sap enhancement' via CMOD, entering the project name and chosing 'Display'.
Then Double click the Components 'EXIT_SAPLRSAP_001', we can see the function module 'EXIT_SAPLRSAP_001'. In the source codes, there is an include program, it is 'INCLUDE ZXRSAU01.'.
Then, I double clicked the Include program and find the position program terminated. The source codes are:
ZQM_NOT_SHFGRP *
when 'ZQM_NOT_SHFGRP'.
loop at c_t_data into i_not_shfgrp .
l_tabix = sy-tabix .
clear :mbatch ,zshift,cond ,zfield, zcharg, day_temp .
refresh itab.
if i_not_shfgrp-ausvn is initial.
else.
aa = '080000'.
bb = '160000'.
cc = '235959'.
day_temp = i_not_shfgrp-ausvn.
if i_not_shfgrp-auztv ge aa and
i_not_shfgrp-auztv lt bb .
zshift = 'MSHF' .
elseif i_not_shfgrp-auztv ge bb and
i_not_shfgrp-auztv le cc .
zshift = 'LSHF'.
else .
zshift = 'NSHF'.
day_temp = i_not_shfgrp-ausvn - 1.
endif.
concatenate 'TPR'
day_temp+6(2)
' = '
' ''' zshift '''' into
cond .
append cond to itab .
select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
and (itab) .
endselect.
endif.
I found that we got a TPR00 during concatenation. In other words, day_temp+6(2) = 00. But I think it is impossible. I can not explain this.
Any ideas, my friends. Many thanks.select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
<b>and (itab) .</b> => doesn't make sense?!
endselect.
endif.
it seems something got deleted between 'and' and '(itab)'... so, you'll have to recheck the requirements for your select to fill the 'and' statement further.
so, it should look like
and monat = day_temp+4(2)
and <b><some kind of condition that needs to be fulfilled></b>.
endselect.
<b><some logic to fill a line in your internal table></b>.
append cond to itab.
endif.
obviously <some kind of condition that needs to be fulfilled> needs to be replaced by a real condition
and <some logic to fill a line in your internal table> needs to be replaced by some kind of formula
I assume something like (otherwise it would be really weird to select that field):
cond = i_not_shfgrp-zzschkz.
or a formula using the i_not_shfgrp-zzschkz field.
It would also be a lot better to replace your select ... endselect by a select single as you'll be selecting 1 record only anyways.
Message was edited by:
RafB -
How to find Spool number for a 2 steps background job.
Hi All,
How to find spool number (and also the background job name ) for a 2 steps background job.
in the table TBTCO i can see step numbers but i dont get the spool number. Is there any link between TBTCO and TSP01.
Also after getting the spool number i need to drill down on ALV report. I hard coded the spool number and was able to drill down using BDC and call transaction but when i press back button it is not returning to the ALV report.
Thanks,
Shiva.Which one creates the spool? (first one I guess)
What kind of spool? (WRITE, sapscript, smartform, pdf...)
Do you use special statements like NEW-PAGE, or other things?
Are you sure that the spools are generated by these jobs? (did you compare the spool generation times and job run dates to be sure...) -
System exception while deleting the file from app server in background job
Hi All,
I have a issue while the deleting the file from application server.
I am using the statement DELETE DATASET in my program to delete the file from app server.
I am able to delete the file from the app server when i run the program from app server.
When i run the same report from background job i am getting the message called System exception.
Is there any secuirity which i need to get the issue.
Thank You,
TaraginiHi All,
I get all the authorization sto delete the file from application serever.
Thing is i am able to run the program sucessfully in foreground but not in the background .
It i snot giving any short dump also just JOB is cancelled with the exception 'Job cancelled after system exception ERROR_MESSAGE'.
Can anybody please give me suggestion
Thanks,
Taragini
Maybe you are looking for
-
MAXDB copy log file from one server to the other server.
Hi All, I want to copy a log file from one server to the other server , the database is Maxdb and i don't know how to do it. I want to do it through command prompt, (set of commands required) the front end tool which we are using is DBM ( database ma
-
Installation of Arch (64) in VirtualBox, issues with Xorg
Hi friends, I want to install Arch (64) in VirtualBox, recent versions both. I did the main installation procedure. But now I want to install X. I did "pacman -S xorg", and "Xorg -configure", and copied the newly created xorg-file to /etc/X11. It cor
-
I am using Windows 7 ultimate and Firefox 4. I tried Alt + enter which does not work.
-
How do I share a iphone camera video with my Mac and iPad
I have several videos from 2 to 5 minutes long I took with my iphone. The files are too long to email. I have photo stream and pictures share but videos do not. How can I get video on my mac so I can better view and share.
-
Hi ALl am trying to read cookies from a URL. I am always getting cookies array count as 0. Pls see code below: import java.io.FileOutputStream; import java.io.IOException; import org.apache.commons.httpclient.*; import org.apache.commons.httpclient.H